[PATCH] 2.5.6-pre2 IDE cleanup 16

There is no such a thing like a ide-clean-15. Never was.  But here comes
what has been done in ide-clean-16:

- Apply a patch for the initialization of the second PIIX channel.
   Found by Daniel Quinlan <quinlan@transmeta.com>

- Apply a patch for the DMA initialization of the serverworks chip.
   Ken Brownfield <brownfld@irridia.com>

- Make the ata_operations methods immune against device type drivers,
   which donot provide them by separating the access to them out. Audit
   them all.

- Resynchronize with 2.5.6-pre1.

- Remove unused IDE_DRIVE_CMD, IDE_DRIVE_TASK, IDE_DRIVE_TASK_MASK,
   IDE_DRIVE_TASKFILE macros.

- Disable configuration of the task file stuff. It is going to go away
   and will be replaced by a truly abstract interface based on
   functionality and *not* direct mess-up of hardware.

- Resync with 2.5.6-pre2.

- Add HPT entries to the fall-back list, since otherwise the driver
   won'trecognize the drives. We will have to make this the default
   behavior for allnot recognized host chip types.

- Fix compilation with no PCI host chip support enabled.

- Apply the overflow fixes for HPT366 by Vojtech Pavlik.

- Kill the one-shoot functions ide_wait_cmd_taks() ide_wait_cmd() by
   moving them to the places where they are actually used. Fix a
   potential buffer overflow on the way.

- Fix usage of ide.c as module. Thanks to Adam J. Richter for figuring
   out what was wrong.

- Various cleanups all along as well as removal of TONS of
   unfinished/dead code.

I think it's sometimes better to remove stuff, which isn't there,
instead of hoping for a "magical day" where it will be finished.

arch/alpha/defconfig

@@ -237,7 +237,6 @@ CONFIG_BLK_DEV_IDECD=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
 
 #
 # IDE chipset support/bugfixes

arch/arm/def-configs/shannon

@@ -378,7 +378,6 @@ CONFIG_BLK_DEV_IDE=m
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
 
 #
 # IDE chipset support/bugfixes

arch/i386/defconfig

@@ -239,7 +239,6 @@ CONFIG_BLK_DEV_IDECD=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
-CONFIG_IDE_TASK_IOCTL=y
 
 #
 # IDE chipset support/bugfixes

arch/sparc64/defconfig

@@ -273,7 +273,6 @@ CONFIG_BLK_DEV_IDECD=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
 
 #
 # IDE chipset support/bugfixes

arch/x86_64/defconfig

@@ -188,7 +188,6 @@ CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
 
 #
 # IDE chipset support/bugfixes

drivers/ide/Config.help

@@ -807,14 +807,6 @@ CONFIG_IDEDISK_STROKE
 
   If you are unsure, say N here.
 
-CONFIG_IDE_TASK_IOCTL
-  This is a direct raw access to the media.  It is a complex but
-  elegant solution to test and validate the domain of the hardware and
-  perform below the driver data recovery if needed.  This is the most
-  basic form of media-forensics.
-
-  If you are unsure, say N here.
-
 CONFIG_BLK_DEV_IDEDMA_FORCED
   This is an old piece of lost code from Linux 2.0 Kernels.
 

drivers/ide/Config.in

@@ -33,9 +33,7 @@ if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
    dep_tristate '  Include IDE/ATAPI FLOPPY support' CONFIG_BLK_DEV_IDEFLOPPY $CONFIG_BLK_DEV_IDE
    dep_tristate '  SCSI emulation support' CONFIG_BLK_DEV_IDESCSI $CONFIG_BLK_DEV_IDE $CONFIG_SCSI
 
-   bool '  IDE Taskfile Access' CONFIG_IDE_TASK_IOCTL
-
-   comment 'IDE chipset support/bugfixes'
+   comment 'IDE chipset support'
    if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
       dep_bool '  CMD640 chipset bugfix/support' CONFIG_BLK_DEV_CMD640 $CONFIG_X86
       dep_bool '    CMD640 enhanced support' CONFIG_BLK_DEV_CMD640_ENHANCED $CONFIG_BLK_DEV_CMD640

drivers/ide/hpt366.c

@@ -374,7 +374,8 @@ static int hpt366_get_info (char *buffer, char **addr, off_t offset, int count)
 		class_rev &= 0xff;
 
 		p += sprintf(p, "\nController: %d\n", i);
-		p += sprintf(p, "Chipset: HPT%s\n", chipset_nums[class_rev]);
+		p += sprintf(p, "Chipset: HPT%s\n",
+			class_rev < sizeof(chipset_nums) / sizeof(char *) ? chipset_nums[class_rev] : "???");
 		p += sprintf(p, "--------------- Primary Channel "
 				"--------------- Secondary Channel "
 				"--------------\n");
@@ -1119,12 +1120,11 @@ unsigned int __init pci_init_hpt366(struct pci_dev *dev)
 	if (test != 0x08)
 		pci_write_config_byte(dev, PCI_MAX_LAT, 0x08);
 
-	if (pci_rev_check_hpt3xx(dev)) {
+	if (pci_rev_check_hpt3xx(dev))
 		init_hpt370(dev);
+
+	if (n_hpt_devs < HPT366_MAX_DEVS)
 		hpt_devs[n_hpt_devs++] = dev;
-	} else {
-		hpt_devs[n_hpt_devs++] = dev;
-	}
 	
 #if defined(DISPLAY_HPT366_TIMINGS) && defined(CONFIG_PROC_FS)
 	if (!hpt366_proc) {

drivers/ide/ide-cd.c

@@ -2906,69 +2906,29 @@ int ide_cdrom_cleanup(ide_drive_t *drive)
 	return 0;
 }
 
-static int ide_cdrom_reinit (ide_drive_t *drive);
-
 static struct ata_operations ide_cdrom_driver = {
 	owner:			THIS_MODULE,
 	cleanup:		ide_cdrom_cleanup,
 	standby:		NULL,
-	flushcache:		NULL,
 	do_request:		ide_do_rw_cdrom,
 	end_request:		NULL,
 	ioctl:			ide_cdrom_ioctl,
 	open:			ide_cdrom_open,
 	release:		ide_cdrom_release,
-	media_change:		ide_cdrom_check_media_change,
+	check_media_change:	ide_cdrom_check_media_change,
 	revalidate:		ide_cdrom_revalidate,
 	pre_reset:		NULL,
 	capacity:		ide_cdrom_capacity,
 	special:		NULL,
-	proc:			NULL,
-	driver_reinit:		ide_cdrom_reinit,
+	proc:			NULL
 };
 
 /* options */
-char *ignore = NULL;
+static char *ignore = NULL;
 
 MODULE_PARM(ignore, "s");
 MODULE_DESCRIPTION("ATAPI CD-ROM Driver");
 
-static int ide_cdrom_reinit (ide_drive_t *drive)
-{
-	struct cdrom_info *info;
-	int failed = 0;
-
-	MOD_INC_USE_COUNT;
-	info = (struct cdrom_info *) kmalloc (sizeof (struct cdrom_info), GFP_KERNEL);
-	if (info == NULL) {
-		printk ("%s: Can't allocate a cdrom structure\n", drive->name);
-		return 1;
-	}
-	if (ide_register_subdriver (drive, &ide_cdrom_driver)) {
-		printk ("%s: Failed to register the driver with ide.c\n", drive->name);
-		kfree (info);
-		return 1;
-	}
-	memset (info, 0, sizeof (struct cdrom_info));
-	drive->driver_data = info;
-
-	/* ATA-PATTERN */
-	ata_ops(drive)->busy++;
-	if (ide_cdrom_setup (drive)) {
-		ata_ops(drive)->busy--;
-		if (ide_cdrom_cleanup (drive))
-			printk ("%s: ide_cdrom_cleanup failed in ide_cdrom_init\n", drive->name);
-		return 1;
-	}
-	ata_ops(drive)->busy--;
-
-	failed--;
-
-	revalidate_drives();
-	MOD_DEC_USE_COUNT;
-	return 0;
-}
-
 static void __exit ide_cdrom_exit(void)
 {
 	ide_drive_t *drive;
@@ -2980,7 +2940,7 @@ static void __exit ide_cdrom_exit(void)
 			failed++;
 		}
 }
- 
+
 int ide_cdrom_init(void)
 {
 	ide_drive_t *drive;

drivers/ide/ide-disk.c

@@ -351,7 +351,19 @@ static int idedisk_open (struct inode *inode, struct file *filp, ide_drive_t *dr
 	return 0;
 }
 
-static int do_idedisk_flushcache(ide_drive_t *drive);
+static int idedisk_flushcache(ide_drive_t *drive)
+{
+	struct hd_drive_task_hdr taskfile;
+	struct hd_drive_hob_hdr hobfile;
+	memset(&taskfile, 0, sizeof(struct hd_drive_task_hdr));
+	memset(&hobfile, 0, sizeof(struct hd_drive_hob_hdr));
+	if (drive->id->cfs_enable_2 & 0x2400) {
+		taskfile.command	= WIN_FLUSH_CACHE_EXT;
+	} else {
+		taskfile.command	= WIN_FLUSH_CACHE;
+	}
+	return ide_wait_taskfile(drive, &taskfile, &hobfile, NULL);
+}
 
 static void idedisk_release (struct inode *inode, struct file *filp, ide_drive_t *drive)
 {
@@ -367,15 +379,16 @@ static void idedisk_release (struct inode *inode, struct file *filp, ide_drive_t
 			drive->doorlocking = 0;
 	}
 	if ((drive->id->cfs_enable_2 & 0x3000) && drive->wcache)
-		if (do_idedisk_flushcache(drive))
+		if (idedisk_flushcache(drive))
 			printk (KERN_INFO "%s: Write Cache FAILED Flushing!\n",
 				drive->name);
 	MOD_DEC_USE_COUNT;
 }
 
-static int idedisk_media_change (ide_drive_t *drive)
+static int idedisk_check_media_change (ide_drive_t *drive)
 {
-	return drive->removable;	/* if removable, always assume it was changed */
+	/* if removable, always assume it was changed */
+	return drive->removable;
 }
 
 /*
@@ -836,7 +849,7 @@ static int write_cache (ide_drive_t *drive, int arg)
 	return 0;
 }
 
-static int do_idedisk_standby (ide_drive_t *drive)
+static int idedisk_standby (ide_drive_t *drive)
 {
 	struct hd_drive_task_hdr taskfile;
 	struct hd_drive_hob_hdr hobfile;
@@ -846,20 +859,6 @@ static int do_idedisk_standby (ide_drive_t *drive)
 	return ide_wait_taskfile(drive, &taskfile, &hobfile, NULL);
 }
 
-static int do_idedisk_flushcache (ide_drive_t *drive)
-{
-	struct hd_drive_task_hdr taskfile;
-	struct hd_drive_hob_hdr hobfile;
-	memset(&taskfile, 0, sizeof(struct hd_drive_task_hdr));
-	memset(&hobfile, 0, sizeof(struct hd_drive_hob_hdr));
-	if (drive->id->cfs_enable_2 & 0x2400) {
-		taskfile.command	= WIN_FLUSH_CACHE_EXT;
-	} else {
-		taskfile.command	= WIN_FLUSH_CACHE;
-	}
-	return ide_wait_taskfile(drive, &taskfile, &hobfile, NULL);
-}
-
 static int set_acoustic (ide_drive_t *drive, int arg)
 {
 	struct hd_drive_task_hdr taskfile;
@@ -1040,72 +1039,36 @@ static void idedisk_setup(ide_drive_t *drive)
 
 static int idedisk_cleanup (ide_drive_t *drive)
 {
-
-	/* FIXME: we will have to think twice whatever this is the proper place
-	 * to do it.
-	 */
-
 	put_device(&drive->device);
 	if ((drive->id->cfs_enable_2 & 0x3000) && drive->wcache)
-		if (do_idedisk_flushcache(drive))
+		if (idedisk_flushcache(drive))
 			printk (KERN_INFO "%s: Write Cache FAILED Flushing!\n",
 				drive->name);
 	return ide_unregister_subdriver(drive);
 }
 
-static int idedisk_reinit(ide_drive_t *drive);
-
 /*
  *      IDE subdriver functions, registered with ide.c
  */
 static struct ata_operations idedisk_driver = {
 	owner:			THIS_MODULE,
 	cleanup:		idedisk_cleanup,
-	standby:		do_idedisk_standby,
-	flushcache:		do_idedisk_flushcache,
+	standby:		idedisk_standby,
 	do_request:		do_rw_disk,
 	end_request:		NULL,
 	ioctl:			NULL,
 	open:			idedisk_open,
 	release:		idedisk_release,
-	media_change:		idedisk_media_change,
-	revalidate:		ide_revalidate_drive,
+	check_media_change:	idedisk_check_media_change,
+	revalidate:		NULL, /* use default method */
 	pre_reset:		idedisk_pre_reset,
 	capacity:		idedisk_capacity,
 	special:		idedisk_special,
-	proc:			idedisk_proc,
-	driver_reinit:		idedisk_reinit,
+	proc:			idedisk_proc
 };
 
 MODULE_DESCRIPTION("ATA DISK Driver");
 
-static int idedisk_reinit(ide_drive_t *drive)
-{
-	int failed = 0;
-
-	MOD_INC_USE_COUNT;
-
-	if (ide_register_subdriver (drive, &idedisk_driver)) {
-		printk (KERN_ERR "ide-disk: %s: Failed to register the driver with ide.c\n", drive->name);
-		return 1;
-	}
-
-	ata_ops(drive)->busy++;
-	idedisk_setup(drive);
-	if ((!drive->head || drive->head > 16) && !drive->select.b.lba) {
-		printk(KERN_ERR "%s: INVALID GEOMETRY: %d PHYSICAL HEADS?\n", drive->name, drive->head);
-		idedisk_cleanup(drive);
-		ata_ops(drive)->busy--;
-		return 1;
-	}
-	ata_ops(drive)->busy--;
-	failed--;
-
-	revalidate_drives();
-	MOD_DEC_USE_COUNT;
-	return 0;
-}
-
 static void __exit idedisk_exit (void)
 {
 	ide_drive_t *drive;
@@ -1136,15 +1099,12 @@ int idedisk_init (void)
 			printk (KERN_ERR "ide-disk: %s: Failed to register the driver with ide.c\n", drive->name);
 			continue;
 		}
-		ata_ops(drive)->busy++;
 		idedisk_setup(drive);
 		if ((!drive->head || drive->head > 16) && !drive->select.b.lba) {
 			printk(KERN_ERR "%s: INVALID GEOMETRY: %d PHYSICAL HEADS?\n", drive->name, drive->head);
 			idedisk_cleanup(drive);
-			ata_ops(drive)->busy--;
 			continue;
 		}
-		ata_ops(drive)->busy--;
 		failed--;
 	}
 	revalidate_drives();

drivers/ide/ide-floppy.c

@@ -1819,10 +1819,10 @@ static void idefloppy_release (struct inode *inode, struct file *filp, ide_drive
 /*
  *	Check media change. Use a simple algorithm for now.
  */
-static int idefloppy_media_change (ide_drive_t *drive)
+static int idefloppy_check_media_change (ide_drive_t *drive)
 {
 	idefloppy_floppy_t *floppy = drive->driver_data;
-	
+
 	return test_and_clear_bit (IDEFLOPPY_MEDIA_CHANGED, &floppy->flags);
 }
 
@@ -2038,8 +2038,6 @@ static ide_proc_entry_t idefloppy_proc[] = {
 
 #endif	/* CONFIG_PROC_FS */
 
-static int idefloppy_reinit(ide_drive_t *drive);
-
 /*
  *	IDE subdriver functions, registered with ide.c
  */
@@ -2047,58 +2045,19 @@ static struct ata_operations idefloppy_driver = {
 	owner:			THIS_MODULE,
 	cleanup:		idefloppy_cleanup,
 	standby:		NULL,
-	flushcache:		NULL,
 	do_request:		idefloppy_do_request,
 	end_request:		idefloppy_end_request,
 	ioctl:			idefloppy_ioctl,
 	open:			idefloppy_open,
 	release:		idefloppy_release,
-	media_change:		idefloppy_media_change,
-	revalidate:		ide_revalidate_drive,
+	check_media_change:	idefloppy_check_media_change,
+	revalidate:		NULL, /* use default method */
 	pre_reset:		NULL,
 	capacity:		idefloppy_capacity,
 	special:		NULL,
-	proc:			idefloppy_proc,
-	driver_reinit:		idefloppy_reinit,
+	proc:			idefloppy_proc
 };
 
-static int idefloppy_reinit (ide_drive_t *drive)
-{
-	idefloppy_floppy_t *floppy;
-	int failed = 0;
-
-	MOD_INC_USE_COUNT;
-	while ((drive = ide_scan_devices(ATA_FLOPPY, "ide-floppy", NULL, failed++)) != NULL) {
-		if (!idefloppy_identify_device (drive, drive->id)) {
-			printk (KERN_ERR "ide-floppy: %s: not supported by this version of ide-floppy\n", drive->name);
-			continue;
-		}
-		if (drive->scsi) {
-			printk("ide-floppy: passing drive %s to ide-scsi emulation.\n", drive->name);
-			continue;
-		}
-		if ((floppy = (idefloppy_floppy_t *) kmalloc (sizeof (idefloppy_floppy_t), GFP_KERNEL)) == NULL) {
-			printk (KERN_ERR "ide-floppy: %s: Can't allocate a floppy structure\n", drive->name);
-			continue;
-		}
-		if (ide_register_subdriver (drive, &idefloppy_driver)) {
-			printk (KERN_ERR "ide-floppy: %s: Failed to register the driver with ide.c\n", drive->name);
-			kfree (floppy);
-			continue;
-		}
-
-		/* ATA-PATTERN */
-		ata_ops(drive)->busy++;
-		idefloppy_setup (drive, floppy);
-		ata_ops(drive)->busy--;
-
-		failed--;
-	}
-	revalidate_drives();
-	MOD_DEC_USE_COUNT;
-	return 0;
-}
-
 MODULE_DESCRIPTION("ATAPI FLOPPY Driver");
 
 static void __exit idefloppy_exit (void)

drivers/ide/ide-geometry.c

@@ -14,14 +14,14 @@
 #if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
 
 extern ide_drive_t * get_info_ptr(kdev_t);
-extern unsigned long current_capacity (ide_drive_t *);
 
 /*
  * If heads is nonzero: find a translation with this many heads and S=63.
  * Otherwise: find out how OnTrack Disk Manager would translate the disk.
  */
 static void
-ontrack(ide_drive_t *drive, int heads, unsigned int *c, int *h, int *s) {
+ontrack(ide_drive_t *drive, int heads, unsigned int *c, int *h, int *s)
+{
 	static const byte dm_head_vals[] = {4, 8, 16, 32, 64, 128, 255, 0};
 	const byte *headp = dm_head_vals;
 	unsigned long total;
@@ -34,7 +34,7 @@ ontrack(ide_drive_t *drive, int heads, unsigned int *c, int *h, int *s) {
 	 * computes a geometry different from what OnTrack uses.]
 	 */
 
-	total = ata_ops(drive)->capacity(drive);
+	total = ata_capacity(drive);
 
 	*s = 63;
 
@@ -136,7 +136,7 @@ int ide_xlate_1024 (kdev_t i_rdev, int xparm, int ptheads, const char *msg)
 		ret = 1;
 	}
 
-	drive->part[0].nr_sects = current_capacity(drive);
+	drive->part[0].nr_sects = ata_capacity(drive);
 
 	if (ret)
 		printk("%s%s [%d/%d/%d]", msg, msg1,

drivers/ide/ide-pci.c

@@ -303,7 +303,9 @@ static ide_pci_device_t pci_chipsets[] __initdata = {
 #ifdef CONFIG_BLK_DEV_IT8172
 	{PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_IT8172G, pci_init_it8172,	NULL, ide_init_it8172, NULL, {{0x00,0x00,0x00}, {0x40,0x00,0x01}}, ON_BOARD, 0, 0 },
 #endif
-	/* Those are id's of chips we don't deal currently with. */
+	/* Those are id's of chips we don't deal currently with,
+	 * but which still need some generic quirk handling.
+	 */
 	{PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_SAMURAI_IDE, NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, 0 },
 	{PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_640, NULL, NULL, IDE_IGNORE, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, 0 },
 	{PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87410, NULL, NULL, NULL, NULL, {{0x43,0x08,0x08}, {0x47,0x08,0x08}}, ON_BOARD, 0, 0 },
@@ -313,6 +315,7 @@ static ide_pci_device_t pci_chipsets[] __initdata = {
 	{PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886A, NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, ATA_F_FIXIRQ },
 	{PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF, NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, ATA_F_FIXIRQ },
 	{PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C561, NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, ATA_F_NOADMA },
+	{PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT366, NULL, NULL, IDE_NO_DRIVER, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, OFF_BOARD, 240, ATA_F_IRQ | ATA_F_HPTHACK },
 	{0, 0, NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0 }};
 
 /*

drivers/ide/ide-probe.c

@@ -471,9 +471,11 @@ static void hwif_register (ide_hwif_t *hwif)
 	sprintf(hwif->device.bus_id, "%04x", hwif->io_ports[IDE_DATA_OFFSET]);
 	sprintf(hwif->device.name, "ide");
 	hwif->device.driver_data = hwif;
+#ifdef CONFIG_BLK_DEV_IDEPCI
 	if (hwif->pci_dev)
 		hwif->device.parent = &hwif->pci_dev->dev;
 	else
+#endif
 		hwif->device.parent = NULL; /* Would like to do = &device_legacy */
 	device_register(&hwif->device);
 

drivers/ide/ide-proc.c

@@ -353,7 +353,7 @@ int proc_ide_read_capacity
 	if (!driver)
 		len = sprintf(page, "(none)\n");
         else
-		len = sprintf(page,"%llu\n", (unsigned long long) drive->driver->capacity(drive));
+		len = sprintf(page,"%llu\n", (unsigned long long) ata_capacity(drive));
 	PROC_IDE_READ_RETURN(page,start,off,count,eof,len);
 }
 

drivers/ide/ide-tape.c

@@ -6140,7 +6140,12 @@ static ide_proc_entry_t idetape_proc[] = {
 
 #endif
 
-static int idetape_reinit(ide_drive_t *drive);
+static void idetape_revalidate(ide_drive_t *_dummy)
+{
+	/* We don't have to handle any partition information here, which is the
+	 * default behaviour of this method.
+	 */
+}
 
 /*
  *	IDE subdriver functions, registered with ide.c
@@ -6149,18 +6154,16 @@ static struct ata_operations idetape_driver = {
 	owner:			THIS_MODULE,
 	cleanup:		idetape_cleanup,
 	standby:		NULL,
-	flushcache:		NULL,
 	do_request:		idetape_do_request,
 	end_request:		idetape_end_request,
 	ioctl:			idetape_blkdev_ioctl,
 	open:			idetape_blkdev_open,
 	release:		idetape_blkdev_release,
-	media_change:		NULL,
-	revalidate:		NULL,
+	check_media_change:	NULL,
+	revalidate:		idetape_revalidate,
 	pre_reset:		idetape_pre_reset,
 	capacity:		NULL,
-	proc:			idetape_proc,
-	driver_reinit:		idetape_reinit,
+	proc:			idetape_proc
 };
 
 /*
@@ -6175,12 +6178,6 @@ static struct file_operations idetape_fops = {
 	release:	idetape_chrdev_release,
 };
 
-/* This will propably just go entierly away... */
-static int idetape_reinit (ide_drive_t *drive)
-{
-	return 1;
-}
-
 MODULE_DESCRIPTION("ATAPI Streaming TAPE Driver");
 MODULE_LICENSE("GPL");
 

drivers/ide/ide-taskfile.c

@@ -1750,6 +1750,29 @@ int ide_taskfile_ioctl (ide_drive_t *drive, struct inode *inode, struct file *fi
 	return err;
 }
 
+/*
+ * Issue ATA command and wait for completion. use for implementing commands in
+ * kernel.
+ *
+ * The caller has to make sure buf is never NULL!
+ */
+static int ide_wait_cmd(ide_drive_t *drive, int cmd, int nsect, int feature, int sectors, byte *argbuf)
+{
+	struct request rq;
+
+	/* FIXME: Do we really have to zero out the buffer?
+	 */
+	memset(argbuf, 0, 4 + SECTOR_WORDS * 4 * sectors);
+	ide_init_drive_cmd(&rq);
+	rq.buffer = argbuf;
+	*argbuf++ = cmd;
+	*argbuf++ = nsect;
+	*argbuf++ = feature;
+	*argbuf++ = sectors;
+
+	return ide_do_drive_cmd(drive, &rq, ide_wait);
+}
+
 int ide_cmd_ioctl (ide_drive_t *drive, struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
 {
 	int err = 0;
@@ -1806,12 +1829,20 @@ int ide_cmd_ioctl (ide_drive_t *drive, struct inode *inode, struct file *file, u
 int ide_task_ioctl (ide_drive_t *drive, struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
 {
 	int err = 0;
-	byte args[7], *argbuf = args;
+	u8 args[7];
+	u8 *argbuf;
 	int argsize = 7;
+	struct request rq;
+
+	argbuf = args;
 
 	if (copy_from_user(args, (void *)arg, 7))
 		return -EFAULT;
-	err = ide_wait_cmd_task(drive, argbuf);
+
+	ide_init_drive_cmd(&rq);
+	rq.flags = REQ_DRIVE_TASK;
+	rq.buffer = argbuf;
+	err = ide_do_drive_cmd(drive, &rq, ide_wait);
 	if (copy_to_user((void *)arg, argbuf, argsize))
 		err = -EFAULT;
 	return err;

drivers/ide/piix.c

@@ -214,7 +214,7 @@ static void piix_tune_drive (ide_drive_t *drive, byte pio)
 {
 	unsigned long flags;
 	u16 master_data;
-	byte slave_data;
+	u8 slave_data;
 	int is_slave		= (&HWIF(drive)->drives[1] == drive);
 	int master_port		= HWIF(drive)->index ? 0x42 : 0x40;
 	int slave_port		= 0x44;

drivers/ide/serverworks.c

@@ -660,8 +660,10 @@ void __init ide_init_svwks (ide_hwif_t *hwif)
 	hwif->autodma = 0;
 #else /* CONFIG_BLK_DEV_IDEDMA */
 	if (hwif->dma_base) {
+#ifdef CONFIG_IDEDMA_AUTO
 		if (!noautodma)
 			hwif->autodma = 1;
+#endif
 		hwif->dmaproc = &svwks_dmaproc;
 		hwif->highmem = 1;
 	} else {

drivers/scsi/ide-scsi.c

@@ -536,7 +536,11 @@ static int idescsi_cleanup (ide_drive_t *drive)
 	return 0;
 }
 
-static int idescsi_reinit(ide_drive_t *drive);
+static void idescsi_revalidate(ide_drive_t *_dummy)
+{
+	/* The partition information will be handled by the SCSI layer.
+	 */
+}
 
 /*
  *	IDE subdriver functions, registered with ide.c
@@ -545,26 +549,19 @@ static struct ata_operations idescsi_driver = {
 	owner:			THIS_MODULE,
 	cleanup:		idescsi_cleanup,
 	standby:		NULL,
-	flushcache:		NULL,
 	do_request:		idescsi_do_request,
 	end_request:		idescsi_end_request,
 	ioctl:			NULL,
 	open:			idescsi_open,
 	release:		idescsi_ide_release,
-	media_change:		NULL,
-	revalidate:		NULL,
+	check_media_change:	NULL,
+	revalidate:		idescsi_revalidate,
 	pre_reset:		NULL,
 	capacity:		NULL,
 	special:		NULL,
-	proc:			NULL,
-	driver_reinit:		idescsi_reinit,
+	proc:			NULL
 };
 
-static int idescsi_reinit (ide_drive_t *drive)
-{
-	return 0;
-}
-
 /*
  *	idescsi_init will register the driver for each scsi.
  */

include/linux/ide.h

@@ -51,28 +51,16 @@
 #endif
 
 #ifdef CONFIG_BLK_DEV_CMD640
-#if 0	/* change to 1 when debugging cmd640 problems */
+# if 0	/* change to 1 when debugging cmd640 problems */
 void cmd640_dump_regs (void);
-#define CMD640_DUMP_REGS cmd640_dump_regs() /* for debugging cmd640 chipset */
+#  define CMD640_DUMP_REGS cmd640_dump_regs() /* for debugging cmd640 chipset */
+# endif
 #endif
-#endif  /* CONFIG_BLK_DEV_CMD640 */
 
 #ifndef DISABLE_IRQ_NOSYNC
-#define DISABLE_IRQ_NOSYNC	0
+# define DISABLE_IRQ_NOSYNC	0
 #endif
 
-/*
- * IDE_DRIVE_CMD is used to implement many features of the hdparm utility
- */
-#define IDE_DRIVE_CMD			99	/* (magic) undef to reduce kernel size*/
-
-#define IDE_DRIVE_TASK			98
-
-/*
- * IDE_DRIVE_TASKFILE is used to implement many features needed for raw tasks
- */
-#define IDE_DRIVE_TASKFILE		97
-
 /*
  *  "No user-serviceable parts" beyond this point  :)
  *****************************************************************************/
@@ -95,7 +83,7 @@ typedef unsigned char	byte;	/* used everywhere */
  * Ensure that various configuration flags have compatible settings
  */
 #ifdef REALLY_SLOW_IO
-#undef REALLY_FAST_IO
+# undef REALLY_FAST_IO
 #endif
 
 #define HWIF(drive)		((drive)->hwif)
@@ -705,21 +693,19 @@ struct ata_operations {
 	unsigned busy: 1; /* FIXME: this will go soon away... */
 	int (*cleanup)(ide_drive_t *);
 	int (*standby)(ide_drive_t *);
-	int (*flushcache)(ide_drive_t *);
 	ide_startstop_t	(*do_request)(ide_drive_t *, struct request *, unsigned long);
 	int (*end_request)(ide_drive_t *drive, int uptodate);
 
 	int (*ioctl)(ide_drive_t *, struct inode *, struct file *, unsigned int, unsigned long);
 	int (*open)(struct inode *, struct file *, ide_drive_t *);
 	void (*release)(struct inode *, struct file *, ide_drive_t *);
-	int (*media_change)(ide_drive_t *);
+	int (*check_media_change)(ide_drive_t *);
 	void (*revalidate)(ide_drive_t *);
 
 	void (*pre_reset)(ide_drive_t *);
 	unsigned long (*capacity)(ide_drive_t *);
 	ide_startstop_t	(*special)(ide_drive_t *);
-	ide_proc_entry_t		*proc;
-	int (*driver_reinit)(ide_drive_t *);
+	ide_proc_entry_t *proc;
 };
 
 /* Alas, no aliases. Too much hassle with bringing module.h everywhere */
@@ -734,6 +720,7 @@ do {	\
 		__MOD_DEC_USE_COUNT((ata)->owner);	\
 } while(0)
 
+extern unsigned long ata_capacity(ide_drive_t *drive);
 
 /* FIXME: Actually implement and use them as soon as possible!  to make the
  * ide_scan_devices() go away! */
@@ -818,16 +805,6 @@ int ide_xlate_1024 (kdev_t, int, int, const char *);
  */
 ide_drive_t *get_info_ptr (kdev_t i_rdev);
 
-/*
- * Return the current idea about the total capacity of this drive.
- */
-unsigned long current_capacity (ide_drive_t *drive);
-
-/*
- * Revalidate (read partition tables)
- */
-extern void ide_revalidate_drive (ide_drive_t *drive);
-
 /*
  * Start a reset operation for an IDE interface.
  * The caller should return immediately after invoking this.
@@ -892,18 +869,9 @@ int ide_do_drive_cmd (ide_drive_t *drive, struct request *rq, ide_action_t actio
 
 /*
  * Clean up after success/failure of an explicit drive cmd.
- * stat/err are used only when (HWGROUP(drive)->rq->cmd == IDE_DRIVE_CMD).
- * stat/err are used only when (HWGROUP(drive)->rq->cmd == IDE_DRIVE_TASK_MASK).
  */
 void ide_end_drive_cmd (ide_drive_t *drive, byte stat, byte err);
 
-/*
- * Issue ATA command and wait for completion. use for implementing commands in kernel
- */
-int ide_wait_cmd (ide_drive_t *drive, int cmd, int nsect, int feature, int sectors, byte *buf);
-
-int ide_wait_cmd_task (ide_drive_t *drive, byte *buf);
- 
 typedef struct ide_task_s {
 	task_ioreg_t		tfRegister[8];
 	task_ioreg_t		hobRegister[8];