Merge branches 'acpi-bus', 'acpi-pci', 'acpica' and 'acpi-doc'

* acpi-bus:
  ACPI / bus: Support for platform initiated graceful shutdown
  ACPI / bus: Correct the comments about acpi_subsystem_init()
  ACPI / bus: Use acpi_handle_debug() in acpi_print_osc_error()

* acpi-pci:
  ACPI / PCI: make pci_slot explicitly non-modular
  ACPI / PCI: pci_slot: Use generic pr_debug utility
  ACPI / PCI: pci_slot: Use more common logging style

* acpica:
  ACPICA: Linux: Enable ACPI_MUTEX_DEBUG for Linux kernel

* acpi-doc:
  ACPI / debugger: Add AML debugger documentation
  ACPI: Add documentation describing ACPICA release automation

Documentation/acpi/aml-debugger.txt

+The AML Debugger
+
+Copyright (C) 2016, Intel Corporation
+Author: Lv Zheng <lv.zheng@intel.com>
+
+
+This document describes the usage of the AML debugger embedded in the Linux
+kernel.
+
+1. Build the debugger
+
+   The following kernel configuration items are required to enable the AML
+   debugger interface from the Linux kernel:
+
+   CONFIG_ACPI_DEBUGGER=y
+   CONFIG_ACPI_DEBUGGER_USER=m
+
+   The userspace utlities can be built from the kernel source tree using
+   the following commands:
+
+   $ cd tools
+   $ make acpi
+
+   The resultant userspace tool binary is then located at:
+
+     tools/acpi/power/acpi/acpidbg/acpidbg
+
+   It can be installed to system directories by running "make install" (as a
+   sufficiently privileged user).
+
+2. Start the userspace debugger interface
+
+   After booting the kernel with the debugger built-in, the debugger can be
+   started by using the following commands:
+
+   # mount -t debugfs none /sys/kernel/debug
+   # modprobe acpi_dbg
+   # tools/acpi/power/acpi/acpidbg/acpidbg
+
+   That spawns the interactive AML debugger environment where you can execute
+   debugger commands.
+
+   The commands are documented in the "ACPICA Overview and Programmer Reference"
+   that can be downloaded from
+
+   https://acpica.org/documentation
+
+   The detailed debugger commands reference is located in Chapter 12 "ACPICA
+   Debugger Reference".  The "help" command can be used for a quick reference.
+
+3. Stop the userspace debugger interface
+
+   The interactive debugger interface can be closed by pressing Ctrl+C or using
+   the "quit" or "exit" commands.  When finished, unload the module with:
+
+   # rmmod acpi_dbg
+
+   The module unloading may fail if there is an acpidbg instance running.
+
+4. Run the debugger in a script
+
+   It may be useful to run the AML debugger in a test script. "acpidbg" supports
+   this in a special "batch" mode.  For example, the following command outputs
+   the entire ACPI namespace:
+
+   # acpidbg -b "namespace"

drivers/acpi/bus.c

@@ -30,6 +30,9 @@
 #include <linux/acpi.h>
 #include <linux/slab.h>
 #include <linux/regulator/machine.h>
+#include <linux/workqueue.h>
+#include <linux/reboot.h>
+#include <linux/delay.h>
 #ifdef CONFIG_X86
 #include <asm/mpspec.h>
 #endif
@@ -174,22 +177,17 @@ void acpi_bus_detach_private_data(acpi_handle handle)
 EXPORT_SYMBOL_GPL(acpi_bus_detach_private_data);
 
 static void acpi_print_osc_error(acpi_handle handle,
-	struct acpi_osc_context *context, char *error)
+				 struct acpi_osc_context *context, char *error)
 {
-	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER};
 	int i;
 
-	if (ACPI_FAILURE(acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer)))
-		printk(KERN_DEBUG "%s: %s\n", context->uuid_str, error);
-	else {
-		printk(KERN_DEBUG "%s (%s): %s\n",
-		       (char *)buffer.pointer, context->uuid_str, error);
-		kfree(buffer.pointer);
-	}
-	printk(KERN_DEBUG "_OSC request data:");
+	acpi_handle_debug(handle, "(%s): %s\n", context->uuid_str, error);
+
+	pr_debug("_OSC request data:");
 	for (i = 0; i < context->cap.length; i += sizeof(u32))
-		printk(" %x", *((u32 *)(context->cap.pointer + i)));
-	printk("\n");
+		pr_debug(" %x", *((u32 *)(context->cap.pointer + i)));
+
+	pr_debug("\n");
 }
 
 acpi_status acpi_str_to_uuid(char *str, u8 *uuid)
@@ -475,6 +473,56 @@ static void acpi_device_remove_notify_handler(struct acpi_device *device)
 					   acpi_device_notify);
 }
 
+/* Handle events targeting \_SB device (at present only graceful shutdown) */
+
+#define ACPI_SB_NOTIFY_SHUTDOWN_REQUEST 0x81
+#define ACPI_SB_INDICATE_INTERVAL	10000
+
+static void sb_notify_work(struct work_struct *dummy)
+{
+	acpi_handle sb_handle;
+
+	orderly_poweroff(true);
+
+	/*
+	 * After initiating graceful shutdown, the ACPI spec requires OSPM
+	 * to evaluate _OST method once every 10seconds to indicate that
+	 * the shutdown is in progress
+	 */
+	acpi_get_handle(NULL, "\\_SB", &sb_handle);
+	while (1) {
+		pr_info("Graceful shutdown in progress.\n");
+		acpi_evaluate_ost(sb_handle, ACPI_OST_EC_OSPM_SHUTDOWN,
+				ACPI_OST_SC_OS_SHUTDOWN_IN_PROGRESS, NULL);
+		msleep(ACPI_SB_INDICATE_INTERVAL);
+	}
+}
+
+static void acpi_sb_notify(acpi_handle handle, u32 event, void *data)
+{
+	static DECLARE_WORK(acpi_sb_work, sb_notify_work);
+
+	if (event == ACPI_SB_NOTIFY_SHUTDOWN_REQUEST) {
+		if (!work_busy(&acpi_sb_work))
+			schedule_work(&acpi_sb_work);
+	} else
+		pr_warn("event %x is not supported by \\_SB device\n", event);
+}
+
+static int __init acpi_setup_sb_notify_handler(void)
+{
+	acpi_handle sb_handle;
+
+	if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &sb_handle)))
+		return -ENXIO;
+
+	if (ACPI_FAILURE(acpi_install_notify_handler(sb_handle, ACPI_DEVICE_NOTIFY,
+						acpi_sb_notify, NULL)))
+		return -EINVAL;
+
+	return 0;
+}
+
 /* --------------------------------------------------------------------------
                              Device Matching
    -------------------------------------------------------------------------- */
@@ -961,8 +1009,7 @@ void __init acpi_early_init(void)
 /**
  * acpi_subsystem_init - Finalize the early initialization of ACPI.
  *
- * Switch over the platform to the ACPI mode (if possible), initialize the
- * handling of ACPI events, install the interrupt and global lock handlers.
+ * Switch over the platform to the ACPI mode (if possible).
  *
  * Doing this too early is generally unsafe, but at the same time it needs to be
  * done before all things that really depend on ACPI.  The right spot appears to
@@ -1133,6 +1180,7 @@ static int __init acpi_init(void)
 	acpi_sleep_proc_init();
 	acpi_wakeup_device_init();
 	acpi_debugger_init();
+	acpi_setup_sb_notify_handler();
 	return 0;
 }
 

drivers/acpi/pci_slot.c

@@ -22,8 +22,9 @@
  *  General Public License for more details.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/types.h>
@@ -33,30 +34,11 @@
 #include <linux/dmi.h>
 #include <linux/pci-acpi.h>
 
-static bool debug;
 static int check_sta_before_sun;
 
-#define DRIVER_VERSION 	"0.1"
-#define DRIVER_AUTHOR	"Alex Chiang <achiang@hp.com>"
-#define DRIVER_DESC	"ACPI PCI Slot Detection Driver"
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-MODULE_PARM_DESC(debug, "Debugging mode enabled or not");
-module_param(debug, bool, 0644);
-
 #define _COMPONENT		ACPI_PCI_COMPONENT
 ACPI_MODULE_NAME("pci_slot");
 
-#define MY_NAME "pci_slot"
-#define err(format, arg...) pr_err("%s: " format , MY_NAME , ## arg)
-#define info(format, arg...) pr_info("%s: " format , MY_NAME , ## arg)
-#define dbg(format, arg...)					\
-	do {							\
-		if (debug)					\
-			pr_debug("%s: " format,	MY_NAME , ## arg); \
-	} while (0)
-
 #define SLOT_NAME_SIZE 21		/* Inspired by #define in acpiphp.h */
 
 struct acpi_pci_slot {
@@ -76,7 +58,7 @@ check_slot(acpi_handle handle, unsigned long long *sun)
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 
 	acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
-	dbg("Checking slot on path: %s\n", (char *)buffer.pointer);
+	pr_debug("Checking slot on path: %s\n", (char *)buffer.pointer);
 
 	if (check_sta_before_sun) {
 		/* If SxFy doesn't have _STA, we just assume it's there */
@@ -87,14 +69,16 @@ check_slot(acpi_handle handle, unsigned long long *sun)
 
 	status = acpi_evaluate_integer(handle, "_ADR", NULL, &adr);
 	if (ACPI_FAILURE(status)) {
-		dbg("_ADR returned %d on %s\n", status, (char *)buffer.pointer);
+		pr_debug("_ADR returned %d on %s\n",
+			 status, (char *)buffer.pointer);
 		goto out;
 	}
 
 	/* No _SUN == not a slot == bail */
 	status = acpi_evaluate_integer(handle, "_SUN", NULL, sun);
 	if (ACPI_FAILURE(status)) {
-		dbg("_SUN returned %d on %s\n", status, (char *)buffer.pointer);
+		pr_debug("_SUN returned %d on %s\n",
+			 status, (char *)buffer.pointer);
 		goto out;
 	}
 
@@ -132,15 +116,13 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
 	}
 
 	slot = kmalloc(sizeof(*slot), GFP_KERNEL);
-	if (!slot) {
-		err("%s: cannot allocate memory\n", __func__);
+	if (!slot)
 		return AE_OK;
-	}
 
 	snprintf(name, sizeof(name), "%llu", sun);
 	pci_slot = pci_create_slot(pci_bus, device, name, NULL);
 	if (IS_ERR(pci_slot)) {
-		err("pci_create_slot returned %ld\n", PTR_ERR(pci_slot));
+		pr_err("pci_create_slot returned %ld\n", PTR_ERR(pci_slot));
 		kfree(slot);
 		return AE_OK;
 	}
@@ -150,8 +132,8 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
 
 	get_device(&pci_bus->dev);
 
-	dbg("pci_slot: %p, pci_bus: %x, device: %d, name: %s\n",
-		pci_slot, pci_bus->number, device, name);
+	pr_debug("%p, pci_bus: %x, device: %d, name: %s\n",
+		 pci_slot, pci_bus->number, device, name);
 
 	return AE_OK;
 }
@@ -186,7 +168,8 @@ void acpi_pci_slot_remove(struct pci_bus *bus)
 
 static int do_sta_before_sun(const struct dmi_system_id *d)
 {
-	info("%s detected: will evaluate _STA before calling _SUN\n", d->ident);
+	pr_info("%s detected: will evaluate _STA before calling _SUN\n",
+		d->ident);
 	check_sta_before_sun = 1;
 	return 0;
 }

include/acpi/platform/aclinux.h

@@ -73,6 +73,10 @@
 #define ACPI_DEBUGGER
 #endif
 
+#ifdef CONFIG_ACPI_DEBUG
+#define ACPI_MUTEX_DEBUG
+#endif
+
 #include <linux/string.h>
 #include <linux/kernel.h>
 #include <linux/ctype.h>