Commit 254b07b2 authored by Chen Feng's avatar Chen Feng Committed by Wei Xu

arm64: dts: hi3660: Add uarts nodes

Add nodes uart0 to uart4 and uart6 for hi3660 SoC.
Enable uart3 and uart6, disable uart5, in hikey960 board dts.

On HiKey960:
 - UART6 is used as default console, and is wired out through low speed
         expansion connector.
 - UART3 has RTS/CTS hardware handshake, and is wired out through low
         speed expansion connector.
 - UART5 is not used in commercial launched boards. So disable it.
 - UART4 is connected to Bluetooth, WL1837.
Signed-off-by: default avatarChen Feng <puck.chen@hisilicon.com>
Signed-off-by: default avatarWang Xiaoyin <hw.wangxiaoyin@hisilicon.com>
Signed-off-by: default avatarGuodong Xu <guodong.xu@linaro.org>
Reviewed-by: default avatarZhangfei Gao <zhangfei.gao@hisilicon.com>
Signed-off-by: default avatarWei Xu <xuwei5@hisilicon.com>
parent d94eab86
...@@ -15,11 +15,17 @@ / { ...@@ -15,11 +15,17 @@ / {
compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660"; compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660";
aliases { aliases {
serial5 = &uart5; /* console UART */ serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
serial3 = &uart3;
serial4 = &uart4;
serial5 = &uart5;
serial6 = &uart6;
}; };
chosen { chosen {
stdout-path = "serial5:115200n8"; stdout-path = "serial6:115200n8";
}; };
memory@0 { memory@0 {
...@@ -51,6 +57,14 @@ &i2c7 { ...@@ -51,6 +57,14 @@ &i2c7 {
status = "okay"; status = "okay";
}; };
&uart5 { &uart3 {
/* On Low speed expansion */
label = "LS-UART0";
status = "okay";
};
&uart6 {
/* On Low speed expansion */
label = "LS-UART1";
status = "okay"; status = "okay";
}; };
...@@ -242,6 +242,66 @@ i2c7: i2c@fdf0b000 { ...@@ -242,6 +242,66 @@ i2c7: i2c@fdf0b000 {
status = "disabled"; status = "disabled";
}; };
uart0: serial@fdf02000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf02000 0x0 0x1000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>,
<&crg_ctrl HI3660_PCLK>;
clock-names = "uartclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
status = "disabled";
};
uart1: serial@fdf00000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf00000 0x0 0x1000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3660_CLK_GATE_UART1>,
<&crg_ctrl HI3660_CLK_GATE_UART1>;
clock-names = "uartclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
status = "disabled";
};
uart2: serial@fdf03000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf03000 0x0 0x1000>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3660_CLK_GATE_UART2>,
<&crg_ctrl HI3660_PCLK>;
clock-names = "uartclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
status = "disabled";
};
uart3: serial@ffd74000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xffd74000 0x0 0x1000>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3660_FACTOR_UART3>,
<&crg_ctrl HI3660_PCLK>;
clock-names = "uartclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
status = "disabled";
};
uart4: serial@fdf01000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf01000 0x0 0x1000>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3660_CLK_GATE_UART4>,
<&crg_ctrl HI3660_CLK_GATE_UART4>;
clock-names = "uartclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
status = "disabled";
};
uart5: serial@fdf05000 { uart5: serial@fdf05000 {
compatible = "arm,pl011", "arm,primecell"; compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf05000 0x0 0x1000>; reg = <0x0 0xfdf05000 0x0 0x1000>;
...@@ -249,6 +309,20 @@ uart5: serial@fdf05000 { ...@@ -249,6 +309,20 @@ uart5: serial@fdf05000 {
clocks = <&crg_ctrl HI3660_CLK_GATE_UART5>, clocks = <&crg_ctrl HI3660_CLK_GATE_UART5>,
<&crg_ctrl HI3660_CLK_GATE_UART5>; <&crg_ctrl HI3660_CLK_GATE_UART5>;
clock-names = "uartclk", "apb_pclk"; clock-names = "uartclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart5_pmx_func &uart5_cfg_func>;
status = "disabled";
};
uart6: serial@fff32000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfff32000 0x0 0x1000>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3660_CLK_UART6>,
<&crg_ctrl HI3660_PCLK>;
clock-names = "uartclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart6_pmx_func &uart6_cfg_func>;
status = "disabled"; status = "disabled";
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment