Commit 25ac8b9b authored by Chen-Yu Tsai's avatar Chen-Yu Tsai

ARM: sun8i: a83t: Add device node for USB OTG controller

The USB OTG controller found on the A83T is compatible with the one
found on the A33.

Add a device node for it.
Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
parent 05a6a90d
...@@ -242,6 +242,20 @@ mmc2: mmc@1c11000 { ...@@ -242,6 +242,20 @@ mmc2: mmc@1c11000 {
#size-cells = <0>; #size-cells = <0>;
}; };
usb_otg: usb@01c19000 {
compatible = "allwinner,sun8i-a83t-musb",
"allwinner,sun8i-a33-musb";
reg = <0x01c19000 0x0400>;
clocks = <&ccu CLK_BUS_OTG>;
resets = <&ccu RST_BUS_OTG>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mc";
phys = <&usbphy 0>;
phy-names = "usb";
extcon = <&usbphy 0>;
status = "disabled";
};
usbphy: phy@1c19400 { usbphy: phy@1c19400 {
compatible = "allwinner,sun8i-a83t-usb-phy"; compatible = "allwinner,sun8i-a83t-usb-phy";
reg = <0x01c19400 0x10>, reg = <0x01c19400 0x10>,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment