Commit 25fa2071 authored by Kyle Strickland's avatar Kyle Strickland Committed by Mauro Carvalho Chehab

[media] Add support for KWorld PC150-U ATSC hybrid tuner card

[mchehab@redhat.com: CodingStyle fixes]
Signed-off-by: default avatarKyle Strickland <kyle@kyle.strickland.name>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 8d834b52
......@@ -119,4 +119,5 @@ o Cards based on the Phillips saa7134 PCI bridge:
- Compro Videomate DVB-T300
- Compro Videomate DVB-T200
- AVerMedia AVerTVHD MCE A180
- KWorld PC150-U ATSC Hybrid
......@@ -45,6 +45,7 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
rc-it913x-v2.o \
rc-kaiomy.o \
rc-kworld-315u.o \
rc-kworld-pc150u.o \
rc-kworld-plus-tv-analog.o \
rc-leadtek-y04g0051.o \
rc-lirc.o \
......
/* kworld-pc150u.c - Keytable for kworld_pc150u Remote Controller
*
* keymap imported from ir-keymaps.c
*
* Copyright (c) 2010 by Kyle Strickland
* (based on kworld-plus-tv-analog.c by
* Mauro Carvalho Chehab <mchehab@redhat.com>)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <media/rc-map.h>
#include <linux/module.h>
/* Kworld PC150-U
Kyle Strickland <kyle@kyle.strickland.name>
*/
static struct rc_map_table kworld_pc150u[] = {
{ 0x0c, KEY_MEDIA }, /* Kworld key */
{ 0x16, KEY_EJECTCLOSECD }, /* -> ) */
{ 0x1d, KEY_POWER2 },
{ 0x00, KEY_1 },
{ 0x01, KEY_2 },
{ 0x02, KEY_3 },
{ 0x03, KEY_4 },
{ 0x04, KEY_5 },
{ 0x05, KEY_6 },
{ 0x06, KEY_7 },
{ 0x07, KEY_8 },
{ 0x08, KEY_9 },
{ 0x0a, KEY_0 },
{ 0x09, KEY_AGAIN },
{ 0x14, KEY_MUTE },
{ 0x1e, KEY_LAST },
{ 0x17, KEY_ZOOM },
{ 0x1f, KEY_HOMEPAGE },
{ 0x0e, KEY_ESC },
{ 0x20, KEY_UP },
{ 0x21, KEY_DOWN },
{ 0x42, KEY_LEFT },
{ 0x43, KEY_RIGHT },
{ 0x0b, KEY_ENTER },
{ 0x10, KEY_CHANNELUP },
{ 0x11, KEY_CHANNELDOWN },
{ 0x13, KEY_VOLUMEUP },
{ 0x12, KEY_VOLUMEDOWN },
{ 0x19, KEY_TIME}, /* Timeshift */
{ 0x1a, KEY_STOP},
{ 0x1b, KEY_RECORD},
{ 0x4b, KEY_EMAIL},
{ 0x40, KEY_REWIND},
{ 0x44, KEY_PLAYPAUSE},
{ 0x41, KEY_FORWARD},
{ 0x22, KEY_TEXT},
{ 0x15, KEY_AUDIO}, /* ((*)) */
{ 0x0f, KEY_MODE}, /* display ratio */
{ 0x1c, KEY_SYSRQ}, /* snapshot */
{ 0x4a, KEY_SLEEP}, /* sleep timer */
{ 0x48, KEY_SOUND}, /* switch theater mode */
{ 0x49, KEY_BLUE}, /* A */
{ 0x18, KEY_RED}, /* B */
{ 0x23, KEY_GREEN}, /* C */
};
static struct rc_map_list kworld_pc150u_map = {
.map = {
.scan = kworld_pc150u,
.size = ARRAY_SIZE(kworld_pc150u),
.rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */
.name = RC_MAP_KWORLD_PC150U,
}
};
static int __init init_rc_map_kworld_pc150u(void)
{
return rc_map_register(&kworld_pc150u_map);
}
static void __exit exit_rc_map_kworld_pc150u(void)
{
rc_map_unregister(&kworld_pc150u_map);
}
module_init(init_rc_map_kworld_pc150u)
module_exit(exit_rc_map_kworld_pc150u)
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Kyle Strickland <kyle@kyle.strickland.name>");
......@@ -33,6 +33,7 @@
#include "tea5767.h"
#include "tda18271.h"
#include "xc5000.h"
#include "s5h1411.h"
/* commly used strings */
static char name_mute[] = "mute";
......@@ -5712,6 +5713,36 @@ struct saa7134_board saa7134_boards[] = {
.amux = LINE1,
} },
},
[SAA7134_BOARD_KWORLD_PC150U] = {
.name = "Kworld PC150-U",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_TDA8290,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.mpeg = SAA7134_MPEG_DVB,
.gpiomask = 1 << 21,
.ts_type = SAA7134_MPEG_TS_PARALLEL,
.inputs = { {
.name = name_tv,
.vmux = 1,
.amux = TV,
.tv = 1,
}, {
.name = name_comp,
.vmux = 3,
.amux = LINE1,
}, {
.name = name_svideo,
.vmux = 8,
.amux = LINE2,
} },
.radio = {
.name = name_radio,
.amux = TV,
.gpio = 0x0000000,
},
},
};
......@@ -6305,6 +6336,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
.subdevice = 0x7352,
.driver_data = SAA7134_BOARD_KWORLD_ATSC110, /* ATSC 115 */
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133, /* SAA7135HL */
.subvendor = 0x17de,
.subdevice = 0xa134,
.driver_data = SAA7134_BOARD_KWORLD_PC150U,
}, {
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
.subvendor = 0x1461,
......@@ -7134,6 +7171,23 @@ static inline int saa7134_kworld_sbtvd_toggle_agc(struct saa7134_dev *dev,
return 0;
}
static int saa7134_kworld_pc150u_toggle_agc(struct saa7134_dev *dev,
enum tda18271_mode mode)
{
switch (mode) {
case TDA18271_ANALOG:
saa7134_set_gpio(dev, 18, 0);
break;
case TDA18271_DIGITAL:
saa7134_set_gpio(dev, 18, 1);
msleep(30);
break;
default:
return -EINVAL;
}
return 0;
}
static int saa7134_tda8290_18271_callback(struct saa7134_dev *dev,
int command, int arg)
{
......@@ -7150,6 +7204,9 @@ static int saa7134_tda8290_18271_callback(struct saa7134_dev *dev,
case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG:
ret = saa7134_kworld_sbtvd_toggle_agc(dev, arg);
break;
case SAA7134_BOARD_KWORLD_PC150U:
ret = saa7134_kworld_pc150u_toggle_agc(dev, arg);
break;
default:
break;
}
......@@ -7171,6 +7228,7 @@ static int saa7134_tda8290_callback(struct saa7134_dev *dev,
case SAA7134_BOARD_HAUPPAUGE_HVR1120:
case SAA7134_BOARD_AVERMEDIA_M733A:
case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG:
case SAA7134_BOARD_KWORLD_PC150U:
case SAA7134_BOARD_MAGICPRO_PROHDTV_PRO2:
/* tda8290 + tda18271 */
ret = saa7134_tda8290_18271_callback(dev, command, arg);
......@@ -7452,6 +7510,7 @@ int saa7134_board_init1(struct saa7134_dev *dev)
case SAA7134_BOARD_BEHOLD_X7:
case SAA7134_BOARD_BEHOLD_H7:
case SAA7134_BOARD_BEHOLD_A7:
case SAA7134_BOARD_KWORLD_PC150U:
dev->has_remote = SAA7134_REMOTE_I2C;
break;
case SAA7134_BOARD_AVERMEDIA_A169_B:
......
......@@ -61,6 +61,7 @@
#include "zl10036.h"
#include "zl10039.h"
#include "mt312.h"
#include "s5h1411.h"
MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
MODULE_LICENSE("GPL");
......@@ -1158,6 +1159,33 @@ static struct tda18271_config prohdtv_pro2_tda18271_config = {
.output_opt = TDA18271_OUTPUT_LT_OFF,
};
static struct tda18271_std_map kworld_tda18271_std_map = {
.atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 3,
.if_lvl = 6, .rfagc_top = 0x37 },
.qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0,
.if_lvl = 6, .rfagc_top = 0x37 },
};
static struct tda18271_config kworld_pc150u_tda18271_config = {
.std_map = &kworld_tda18271_std_map,
.gate = TDA18271_GATE_ANALOG,
.output_opt = TDA18271_OUTPUT_LT_OFF,
.config = 3, /* Use tuner callback for AGC */
.rf_cal_on_startup = 1
};
static struct s5h1411_config kworld_s5h1411_config = {
.output_mode = S5H1411_PARALLEL_OUTPUT,
.gpio = S5H1411_GPIO_OFF,
.qam_if = S5H1411_IF_4000,
.vsb_if = S5H1411_IF_3250,
.inversion = S5H1411_INVERSION_ON,
.status_mode = S5H1411_DEMODLOCKING,
.mpeg_timing =
S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
};
/* ==================================================================
* Core code
*/
......@@ -1438,6 +1466,22 @@ static int dvb_init(struct saa7134_dev *dev)
&dev->i2c_adap, 0x61,
TUNER_PHILIPS_TUV1236D);
break;
case SAA7134_BOARD_KWORLD_PC150U:
saa7134_set_gpio(dev, 18, 1); /* Switch to digital mode */
saa7134_tuner_callback(dev, 0,
TDA18271_CALLBACK_CMD_AGC_ENABLE, 1);
fe0->dvb.frontend = dvb_attach(s5h1411_attach,
&kworld_s5h1411_config,
&dev->i2c_adap);
if (fe0->dvb.frontend != NULL) {
dvb_attach(tda829x_attach, fe0->dvb.frontend,
&dev->i2c_adap, 0x4b,
&tda829x_no_probe);
dvb_attach(tda18271_attach, fe0->dvb.frontend,
0x60, &dev->i2c_adap,
&kworld_pc150u_tda18271_config);
}
break;
case SAA7134_BOARD_FLYDVBS_LR300:
fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
&dev->i2c_adap);
......
......@@ -254,7 +254,9 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap,
addr = msgs[i].addr << 1;
if (msgs[i].flags & I2C_M_RD)
addr |= 1;
if (i > 0 && msgs[i].flags & I2C_M_RD && msgs[i].addr != 0x40) {
if (i > 0 && msgs[i].flags &
I2C_M_RD && msgs[i].addr != 0x40 &&
msgs[i].addr != 0x19) {
/* workaround for a saa7134 i2c bug
* needed to talk to the mt352 demux
* thanks to pinnacle for the hint */
......@@ -279,6 +281,16 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap,
d1printk("%02x", rc);
msgs[i].buf[byte] = rc;
}
/* discard mysterious extra byte when reading
from Samsung S5H1411. i2c bus gets error
if we do not. */
if (0x19 == msgs[i].addr) {
d1printk(" ?");
rc = i2c_recv_byte(dev);
if (rc < 0)
goto err;
d1printk("%02x", rc);
}
} else {
/* write bytes */
d2printk("write bytes\n");
......
......@@ -210,6 +210,54 @@ static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, u32 *ir_key,
return 1;
}
/* copied and modified from get_key_msi_tvanywhere_plus() */
static int get_key_kworld_pc150u(struct IR_i2c *ir, u32 *ir_key,
u32 *ir_raw)
{
unsigned char b;
unsigned int gpio;
/* <dev> is needed to access GPIO. Used by the saa_readl macro. */
struct saa7134_dev *dev = ir->c->adapter->algo_data;
if (dev == NULL) {
i2cdprintk("get_key_kworld_pc150u: "
"ir->c->adapter->algo_data is NULL!\n");
return -EIO;
}
/* rising SAA7134_GPIO_GPRESCAN reads the status */
saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2);
/* GPIO&0x100 is pulsed low when a button is pressed. Don't do
I2C receive if gpio&0x100 is not low. */
if (gpio & 0x100)
return 0; /* No button press */
/* GPIO says there is a button press. Get it. */
if (1 != i2c_master_recv(ir->c, &b, 1)) {
i2cdprintk("read error\n");
return -EIO;
}
/* No button press */
if (b == 0xff)
return 0;
/* Button pressed */
dprintk("get_key_kworld_pc150u: Key = 0x%02X\n", b);
*ir_key = b;
*ir_raw = b;
return 1;
}
static int get_key_purpletv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
{
unsigned char b;
......@@ -901,6 +949,21 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev)
msg_msi.addr, dev->i2c_adap.name,
(1 == rc) ? "yes" : "no");
break;
case SAA7134_BOARD_KWORLD_PC150U:
/* copied and modified from MSI TV@nywhere Plus */
dev->init_data.name = "Kworld PC150-U";
dev->init_data.get_key = get_key_kworld_pc150u;
dev->init_data.ir_codes = RC_MAP_KWORLD_PC150U;
info.addr = 0x30;
/* MSI TV@nywhere Plus controller doesn't seem to
respond to probes unless we read something from
an existing device. Weird...
REVISIT: might no longer be needed */
rc = i2c_transfer(&dev->i2c_adap, &msg_msi, 1);
dprintk("probe 0x%02x @ %s: %s\n",
msg_msi.addr, dev->i2c_adap.name,
(1 == rc) ? "yes" : "no");
break;
case SAA7134_BOARD_HAUPPAUGE_HVR1110:
dev->init_data.name = "HVR 1110";
dev->init_data.get_key = get_key_hvr1110;
......
......@@ -126,8 +126,8 @@ struct saa7134_card_ir {
unsigned users;
u32 polling;
u32 last_gpio;
u32 mask_keycode, mask_keydown, mask_keyup;
u32 last_gpio;
u32 mask_keycode, mask_keydown, mask_keyup;
bool running;
bool active;
......@@ -331,6 +331,7 @@ struct saa7134_card_ir {
#define SAA7134_BOARD_BEHOLD_501 186
#define SAA7134_BOARD_BEHOLD_503FM 187
#define SAA7134_BOARD_SENSORAY811_911 188
#define SAA7134_BOARD_KWORLD_PC150U 189
#define SAA7134_MAXBOARDS 32
#define SAA7134_INPUT_MAX 8
......
......@@ -106,6 +106,7 @@ void rc_map_init(void);
#define RC_MAP_IT913X_V2 "rc-it913x-v2"
#define RC_MAP_KAIOMY "rc-kaiomy"
#define RC_MAP_KWORLD_315U "rc-kworld-315u"
#define RC_MAP_KWORLD_PC150U "rc-kworld-pc150u"
#define RC_MAP_KWORLD_PLUS_TV_ANALOG "rc-kworld-plus-tv-analog"
#define RC_MAP_LEADTEK_Y04G0051 "rc-leadtek-y04g0051"
#define RC_MAP_LIRC "rc-lirc"
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment