Remove invalidate_partition call from do_md_stop.

When stopping an md array, or just switching to read-only, we
currently call invalidate_partition while holding the mddev lock.
The main reason for this is probably to ensure all dirty buffers
are flushed (invalidate_partition calls fsync_bdev).

However if any dirty buffers are found, it will almost certainly cause
a deadlock as starting writeout will require an update to the
superblock, and performing that updates requires taking the mddev
lock - which is already held.

This deadlock can be demonstrated by running "reboot -f -n" with
a root filesystem on md/raid, and some dirty buffers in memory.

All other calls to stop an array should already happen after a flush.
The normal sequence is to stop using the array (e.g. umount) which
will cause __blkdev_put to call sync_blockdev.  Then open the
array and issue the STOP_ARRAY ioctl while the buffers are all still
clean.

So this invalidate_partition is normally a no-op, except for one case
where it will cause a deadlock.

So remove it.

This patch possibly addresses the regression recored in
   http://bugzilla.kernel.org/show_bug.cgi?id=11460
and
   http://bugzilla.kernel.org/show_bug.cgi?id=11452

though it isn't yet clear how it ever worked.
Signed-off-by: NeilBrown <neilb@suse.de>

drivers/md/md.c

@@ -3841,8 +3841,6 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
 
 		del_timer_sync(&mddev->safemode_timer);
 
-		invalidate_partition(disk, 0);
-
 		switch(mode) {
 		case 1: /* readonly */
 			err  = -ENXIO;