gpiolib: acpi: Add Terra Pad 1061 to the run_edge_events_on_boot_blacklist

The Terra Pad 1061 has the usual micro-USB-B id-pin handler, but instead
of controlling the actual micro-USB-B it turns the 5V boost for the
tablet's USB-A connector and its keyboard-cover connector off.

The actual micro-USB-B connector on the tablet is wired for charging only,
and its id pin is *not* connected to the GPIO which is used for the
(broken) id-pin event handler in the DSDT.

While at it not only add a comment why the Terra Pad 1061 is on the
blacklist, but also fix the missing comment for the Minix Neo Z83-4 entry.

Fixes: 61f7f7c8 ("gpiolib: acpi: Add gpiolib_acpi_run_edge_events_on_boot option and blacklist")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

drivers/gpio/gpiolib-acpi.c

@@ -1304,11 +1304,28 @@ late_initcall_sync(acpi_gpio_handle_deferred_request_irqs);
 
 static const struct dmi_system_id run_edge_events_on_boot_blacklist[] = {
 	{
+		/*
+		 * The Minix Neo Z83-4 has a micro-USB-B id-pin handler for
+		 * a non existing micro-USB-B connector which puts the HDMI
+		 * DDC pins in GPIO mode, breaking HDMI support.
+		 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "MINIX"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Z83-4"),
 		}
 	},
+	{
+		/*
+		 * The Terra Pad 1061 has a micro-USB-B id-pin handler, which
+		 * instead of controlling the actual micro-USB-B turns the 5V
+		 * boost for its USB-A connector off. The actual micro-USB-B
+		 * connector is wired for charging only.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Wortmann_AG"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TERRA_PAD_1061"),
+		}
+	},
 	{} /* Terminating entry */
 };