Merge jfs@jfs.bkbits.net:linux-2.5

into kleikamp.austin.ibm.com:/home/shaggy/bk/jfs-2.5

Documentation/networking/dl2k.txt

 
     D-Link DL2000-based Gigabit Ethernet Adapter Installation
     for Linux
-    Jan 29, 2002
+    May 23, 2002
 
 Contents
 ========
@@ -202,7 +202,7 @@ media=media_type		- Specifies the media type the NIC operates at.
 				  1000mbps_fd and 1000mbps_hd types are only
 				  available for fiber adapter.
 
-vlan=[0|1]			- Specifies the VLAN ID. If vlan=0, the
+vlan=n				- Specifies the VLAN ID. If vlan=0, the
 				  Virtual Local Area Network (VLAN) function is
 				  disable.
 
@@ -211,24 +211,34 @@ jumbo=[0|1]			- Specifies the jumbo frame support. If jumbo=1,
 				  function is disabled.
 				  Jumbo frame usually improve the performance
 				  int gigabit.
+				  This feature need jumbo frame compatible 
+				  remote.
 				  
-rx_coalesce=n			- Rx frame count each interrupt.
-rx_timeout=n			- Rx DMA wait time for an interrupt. Proper 
-				  values of rx_coalesce and rx_timeout bring 
-				  a conspicuous performance in the fast machine.
-				  Ex. rx_coalesce=5 and rx_timeout=750 
-
-tx_coalesce=n			- Tx transmit count each TxComp interrupt.
-				  Setting value larger than 1 will improve 
-				  performance, but this is possible to lower 
-				  stability in slow UP machines. By default, 
-				  tx_coalesce=1. (dl2k)
+rx_coalesce=m			- Number of rx frame handled each interrupt.
+rx_timeout=n			- Rx DMA wait time for an interrupt. 
+				  If set rx_coalesce > 0, hardware only assert 
+				  an interrupt for m frames. Hardware won't 
+				  assert rx interrupt until m frames received or
+				  reach timeout of n * 640 nano seconds. 
+				  Set proper rx_coalesce and rx_timeout can 
+				  reduce congestion collapse and overload which
+				  has been a bottlenect for high speed network.
 				  
-tx_flow=[1|0]			- Specifies the Tx flow control. If tx_flow=1, 
-				  the Tx flow control enable.
+				  For example, rx_coalesce=10 rx_timeout=800.
+				  that is, hardware assert only 1 interrupt 
+				  for 10 frames received or timeout of 512 us. 
+
+tx_coalesce=n			- Number of tx frame handled each interrupt.
+				  Set n > 1 can reduce the interrupts 
+				  congestion usually lower performance of
+				  high speed network card. Default is 16.
 				  
-rx_flow=[1|0]			- Specifies the Rx flow control. If rx_flow=1, 
-				  the Rx flow control enable.
+tx_flow=[1|0]			- Specifies the Tx flow control. If tx_flow=0, 
+				  the Tx flow control disable else driver
+				  autodetect.
+rx_flow=[1|0]			- Specifies the Rx flow control. If rx_flow=0, 
+				  the Rx flow control enable else driver
+				  autodetect.
 
 
 Configuration Script Sample

Makefile

 VERSION = 2
 PATCHLEVEL = 5
-SUBLEVEL = 22
+SUBLEVEL = 23
 EXTRAVERSION =
 
 # We are using a recursive build, so we need to do a little thinking
@@ -607,7 +607,7 @@ clean:	archclean
 
 mrproper: clean archmrproper
 	@echo 'Making mrproper'
-	@find . \( -size 0 -o -name .depend -o -name .\*.cmd \) \
+	@find . \( -name .depend -o -name .\*.cmd \) \
 		   -type f -print | xargs rm -f
 	@rm -f $(MRPROPER_FILES)
 	@rm -rf $(MRPROPER_DIRS)

arch/i386/mm/ioremap.c

@@ -221,8 +221,6 @@ void iounmap(void *addr)
 		return;
 	} 
 
-	BUG_ON(p->phys_addr == 0);  /* not allocated with ioremap */	
-
 	vmfree_area_pages(VMALLOC_VMADDR(p->addr), p->size);	
 	if (p->flags && p->phys_addr < virt_to_phys(high_memory)) { 
 		change_page_attr(virt_to_page(__va(p->phys_addr)),

drivers/block/ll_rw_blk.c

@@ -161,6 +161,7 @@ void blk_queue_make_request(request_queue_t * q, make_request_fn * mfn)
 	blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH);
 
 	init_waitqueue_head(&q->queue_wait);
+	INIT_LIST_HEAD(&q->plug_list);
 }
 
 /**

drivers/block/umem.c

@@ -129,6 +129,8 @@ struct cardinfo {
 				    */
 	struct bio	*bio, *currentbio, **biotail;
 
+	request_queue_t queue;
+
 	struct mm_page {
 		dma_addr_t		page_dma;
 		struct mm_dma_desc	*desc;
@@ -142,8 +144,6 @@ struct cardinfo {
 	struct tasklet_struct	tasklet;
 	unsigned int dma_status;
 
-	struct tq_struct plug_tq;
-
 	struct {
 		int		good;
 		int		warned;
@@ -293,7 +293,7 @@ static void dump_dmastat(struct cardinfo *card, unsigned int dmastat)
  * Whenever IO on the active page completes, the Ready page is activated
  * and the ex-Active page is clean out and made Ready.
  * Otherwise the Ready page is only activated when it becomes full, or
- * when mm_unplug_device is called via run_task_queue(&tq_disk).
+ * when mm_unplug_device is called via blk_run_queues().
  *
  * If a request arrives while both pages a full, it is queued, and b_rdev is
  * overloaded to record whether it was a read or a write.
@@ -341,8 +341,9 @@ static void mm_start_io(struct cardinfo *card)
 	offset = ((char*)desc) - ((char*)page->desc);
 	writel(cpu_to_le32((page->page_dma+offset)&0xffffffff),
 	       card->csr_remap + DMA_DESCRIPTOR_ADDR);
-	/* if sizeof(dma_addr_t) == 32, this will generate a warning, sorry */
-	writel(cpu_to_le32((page->page_dma)>>32),
+	/* Force the value to u64 before shifting otherwise >> 32 is undefined C
+	 * and on some ports will do nothing ! */
+	writel(cpu_to_le32(((u64)page->page_dma)>>32),
 	       card->csr_remap + DMA_DESCRIPTOR_ADDR + 4);
 
 	/* Go, go, go */
@@ -384,10 +385,12 @@ static inline void reset_page(struct mm_page *page)
 
 static void mm_unplug_device(void *data)
 {
-	struct cardinfo *card = data;
+	request_queue_t *q = data;
+	struct cardinfo *card = q->queuedata;
 
 	spin_lock_bh(&card->lock);
-	activate(card);
+	if (blk_remove_plug(q))
+		activate(card);
 	spin_unlock_bh(&card->lock);
 }
 
@@ -565,8 +568,7 @@ static void process_page(unsigned long data)
 */
 static int mm_make_request(request_queue_t *q, struct bio *bio)
 {
-	struct cardinfo *card = &cards[DEVICE_NR(
-		bio->bi_bdev->bd_dev)];
+	struct cardinfo *card = q->queuedata;
 	PRINTK("mm_make_request %ld %d\n", bh->b_rsector, bh->b_size);
 
 	/* set uptodate now, and clear it if there are any errors */
@@ -576,9 +578,9 @@ static int mm_make_request(request_queue_t *q, struct bio *bio)
 	*card->biotail = bio;
 	bio->bi_next = NULL;
 	card->biotail = &bio->bi_next;
+	blk_plug_device(q);
 	spin_unlock_bh(&card->lock);
 
-	queue_task(&card->plug_tq, &tq_disk);
 	return 0;
 }
 
@@ -1065,11 +1067,12 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i
 	card->bio = NULL;
 	card->biotail = &card->bio;
 
+	blk_queue_make_request(&card->queue, mm_make_request);
+	card->queue.queuedata = card;
+	card->queue.unplug_fn = mm_unplug_device;
+
 	tasklet_init(&card->tasklet, process_page, (unsigned long)card);
 
-	card->plug_tq.sync = 0;
-	card->plug_tq.routine = &mm_unplug_device;
-	card->plug_tq.data = card;
 	card->check_batteries = 0;
 	
 	mem_present = readb(card->csr_remap + MEMCTRLSTATUS_MEMORY);
@@ -1237,6 +1240,17 @@ static struct pci_driver mm_pci_driver = {
 --                               mm_init
 -----------------------------------------------------------------------------------
 */
+
+static request_queue_t * mm_queue_proc(kdev_t dev)
+{
+	int c = DEVICE_NR(kdev_val(dev));
+
+	if (c < MM_MAXCARDS)
+		return &cards[c].queue;
+	else
+		return BLK_DEFAULT_QUEUE(MAJOR_NR);
+}
+	
 int __init mm_init(void)
 {
 	int retval, i;
@@ -1276,11 +1290,9 @@ int __init mm_init(void)
 	mm_gendisk.part      = mm_partitions;
 	mm_gendisk.nr_real   = num_cards;
 
+	blk_dev[MAJOR_NR].queue = mm_queue_proc;
 	add_gendisk(&mm_gendisk);
 
-	blk_queue_make_request(BLK_DEFAULT_QUEUE(MAJOR_NR),
-			       mm_make_request);
-
         blk_size[MAJOR_NR]      = mm_gendisk.sizes;
         for (i = 0; i < num_cards; i++) {
 		register_disk(&mm_gendisk, mk_kdev(MAJOR_NR, i<<MM_SHIFT), MM_SHIFT,

drivers/md/linear.c

 /*
    linear.c : Multiple Devices driver for Linux
-              Copyright (C) 1994-96 Marc ZYNGIER
+	      Copyright (C) 1994-96 Marc ZYNGIER
 	      <zyngier@ufr-info-p7.ibp.fr> or
 	      <maz@gloups.fdn.fr>
 
@@ -33,39 +33,45 @@ static int linear_run (mddev_t *mddev)
 	linear_conf_t *conf;
 	struct linear_hash *table;
 	mdk_rdev_t *rdev;
-	int size, i, j, nb_zone;
+	int size, i, nb_zone, cnt;
 	unsigned int curr_offset;
+	struct list_head *tmp;
 
 	MOD_INC_USE_COUNT;
 
 	conf = kmalloc (sizeof (*conf), GFP_KERNEL);
 	if (!conf)
 		goto out;
+	memset(conf, 0, sizeof(*conf));
 	mddev->private = conf;
 
-	if (md_check_ordering(mddev)) {
-		printk("linear: disks are not ordered, aborting!\n");
-		goto out;
-	}
 	/*
 	 * Find the smallest device.
 	 */
 
 	conf->smallest = NULL;
-	curr_offset = 0;
-	ITERATE_RDEV_ORDERED(mddev,rdev,j) {
+	cnt = 0;
+	ITERATE_RDEV(mddev,rdev,tmp) {
+		int j = rdev->sb->this_disk.raid_disk;
 		dev_info_t *disk = conf->disks + j;
 
+		if (j < 0 || j > mddev->sb->raid_disks || disk->bdev) {
+			printk("linear: disk numbering problem. Aborting!\n");
+			goto out;
+		}
+
 		disk->dev = rdev->dev;
 		disk->bdev = rdev->bdev;
 		atomic_inc(&rdev->bdev->bd_count);
 		disk->size = rdev->size;
-		disk->offset = curr_offset;
-
-		curr_offset += disk->size;
 
 		if (!conf->smallest || (disk->size < conf->smallest->size))
 			conf->smallest = disk;
+		cnt++;
+	}
+	if (cnt != mddev->sb->raid_disks) {
+		printk("linear: not enough drives present. Aborting!\n");
+		goto out;
 	}
 
 	nb_zone = conf->nr_zones =
@@ -81,10 +87,13 @@ static int linear_run (mddev_t *mddev)
 	 * Here we generate the linear hash table
 	 */
 	table = conf->hash_table;
-	i = 0;
 	size = 0;
-	for (j = 0; j < mddev->nb_dev; j++) {
-		dev_info_t *disk = conf->disks + j;
+	curr_offset = 0;
+	for (i = 0; i < cnt; i++) {
+		dev_info_t *disk = conf->disks + i;
+
+		disk->offset = curr_offset;
+		curr_offset += disk->size;
 
 		if (size < 0) {
 			table[-1].dev1 = disk;
@@ -130,12 +139,13 @@ static int linear_stop (mddev_t *mddev)
 	return 0;
 }
 
-static int linear_make_request (mddev_t *mddev, int rw, struct bio *bio)
+static int linear_make_request (request_queue_t *q, struct bio *bio)
 {
-        linear_conf_t *conf = mddev_to_conf(mddev);
-        struct linear_hash *hash;
-        dev_info_t *tmp_dev;
-        long block;
+	mddev_t *mddev = q->queuedata;
+	linear_conf_t *conf = mddev_to_conf(mddev);
+	struct linear_hash *hash;
+	dev_info_t *tmp_dev;
+	long block;
 
 	block = bio->bi_sector >> 1;
 	hash = conf->hash_table + (block / conf->smallest->size);
@@ -186,7 +196,7 @@ static int linear_status (char *page, mddev_t *mddev)
 	}
 	sz += sprintf(page+sz, "\n");
 #endif
-	sz += sprintf(page+sz, " %dk rounding", mddev->param.chunk_size/1024);
+	sz += sprintf(page+sz, " %dk rounding", mddev->sb->chunk_size/1024);
 	return sz;
 }
 

drivers/md/multipath.c

@@ -244,27 +244,19 @@ static int multipath_read_balance (multipath_conf_t *conf)
 	return 0;
 }
 
-static int multipath_make_request (mddev_t *mddev, int rw, struct bio * bio)
+static int multipath_make_request (request_queue_t *q, struct bio * bio)
 {
+	mddev_t *mddev = q->queuedata;
 	multipath_conf_t *conf = mddev_to_conf(mddev);
 	struct bio *real_bio;
 	struct multipath_bh * mp_bh;
 	struct multipath_info *multipath;
 
-/*
- * make_request() can abort the operation when READA is being
- * used and no empty request is available.
- *
- * Currently, just replace the command with READ/WRITE.
- */
-	if (rw == READA)
-		rw = READ;
-
 	mp_bh = multipath_alloc_mpbh (conf);
 
 	mp_bh->master_bio = bio;
 	mp_bh->mddev = mddev;
-	mp_bh->cmd = rw;
+	mp_bh->cmd = bio_data_dir(bio);
 
 	/*
 	 * read balancing logic:
@@ -273,7 +265,7 @@ static int multipath_make_request (mddev_t *mddev, int rw, struct bio * bio)
 
 	real_bio = bio_clone(bio, GFP_NOIO);
 	real_bio->bi_bdev = multipath->bdev;
-	real_bio->bi_rw = rw;
+	real_bio->bi_rw = bio_data_dir(bio);
 	real_bio->bi_end_io = multipath_end_request;
 	real_bio->bi_private = mp_bh;
 	mp_bh->bio = real_bio;
@@ -708,7 +700,6 @@ static void multipathd (void *data)
 		mddev = mp_bh->mddev;
 		if (mddev->sb_dirty) {
 			printk(KERN_INFO "dirty sb detected, updating.\n");
-			mddev->sb_dirty = 0;
 			md_update_sb(mddev);
 		}
 		bio = mp_bh->bio;

drivers/md/raid0.c

@@ -29,21 +29,26 @@
 
 static int create_strip_zones (mddev_t *mddev)
 {
-	int i, c, j, j1, j2;
+	int i, c, j;
 	unsigned long current_offset, curr_zone_offset;
 	raid0_conf_t *conf = mddev_to_conf(mddev);
 	mdk_rdev_t *smallest, *rdev1, *rdev2, *rdev;
+	struct list_head *tmp1, *tmp2;
+	struct strip_zone *zone;
+	int cnt;
  
 	/*
 	 * The number of 'same size groups'
 	 */
 	conf->nr_strip_zones = 0;
  
-	ITERATE_RDEV_ORDERED(mddev,rdev1,j1) {
+	ITERATE_RDEV(mddev,rdev1,tmp1) {
 		printk("raid0: looking at %s\n", partition_name(rdev1->dev));
 		c = 0;
-		ITERATE_RDEV_ORDERED(mddev,rdev2,j2) {
-			printk("raid0:   comparing %s(%ld) with %s(%ld)\n", partition_name(rdev1->dev), rdev1->size, partition_name(rdev2->dev), rdev2->size);
+		ITERATE_RDEV(mddev,rdev2,tmp2) {
+			printk("raid0:   comparing %s(%ld) with %s(%ld)\n",
+			       partition_name(rdev1->dev), rdev1->size,
+			       partition_name(rdev2->dev), rdev2->size);
 			if (rdev2 == rdev1) {
 				printk("raid0:   END\n");
 				break;
@@ -51,7 +56,7 @@ static int create_strip_zones (mddev_t *mddev)
 			if (rdev2->size == rdev1->size)
 			{
 				/*
-				 * Not unique, dont count it as a new
+				 * Not unique, don't count it as a new
 				 * group
 				 */
 				printk("raid0:   EQUAL\n");
@@ -66,29 +71,62 @@ static int create_strip_zones (mddev_t *mddev)
 			printk("raid0: %d zones\n", conf->nr_strip_zones);
 		}
 	}
-		printk("raid0: FINAL %d zones\n", conf->nr_strip_zones);
+	printk("raid0: FINAL %d zones\n", conf->nr_strip_zones);
 
 	conf->strip_zone = vmalloc(sizeof(struct strip_zone)*
 				conf->nr_strip_zones);
 	if (!conf->strip_zone)
 		return 1;
 
+	memset(conf->strip_zone, 0,sizeof(struct strip_zone)*
+				   conf->nr_strip_zones);
+	/* The first zone must contain all devices, so here we check that
+	 * there is a properly alignment of slots to devices and find them all
+	 */
+	zone = &conf->strip_zone[0];
+	cnt = 0;
+	smallest = NULL;
+	ITERATE_RDEV(mddev, rdev1, tmp1) {
+		int j = rdev1->sb->this_disk.raid_disk;
+
+		if (j < 0 || j >= mddev->sb->raid_disks) {
+			printk("raid0: bad disk number %d - aborting!\n", j);
+			goto abort;
+		}
+		if (zone->dev[j]) {
+			printk("raid0: multiple devices for %d - aborting!\n", j);
+			goto abort;
+		}
+		zone->dev[j] = rdev1;
+		if (!smallest || (rdev1->size <smallest->size))
+			smallest = rdev1;
+		cnt++;
+	}
+	if (cnt != mddev->sb->raid_disks) {
+		printk("raid0: too few disks (%d of %d) - aborting!\n", cnt, 
+		       mddev->sb->raid_disks);
+		goto abort;
+	}
+	zone->nb_dev = cnt;
+	zone->size = smallest->size * cnt;
+	zone->zone_offset = 0;
 
-	conf->smallest = NULL;
-	current_offset = 0;
-	curr_zone_offset = 0;
+	conf->smallest = zone;
+	current_offset = smallest->size;
+	curr_zone_offset = zone->size;
 
-	for (i = 0; i < conf->nr_strip_zones; i++)
+	/* now do the other zones */
+	for (i = 1; i < conf->nr_strip_zones; i++)
 	{
-		struct strip_zone *zone = conf->strip_zone + i;
+		zone = conf->strip_zone + i;
 
 		printk("raid0: zone %d\n", i);
 		zone->dev_offset = current_offset;
 		smallest = NULL;
 		c = 0;
 
-		ITERATE_RDEV_ORDERED(mddev,rdev,j) {
-
+		for (j=0; j<cnt; j++) {
+			rdev = conf->strip_zone[0].dev[j];
 			printk("raid0: checking %s ...", partition_name(rdev->dev));
 			if (rdev->size > current_offset)
 			{
@@ -118,6 +156,9 @@ static int create_strip_zones (mddev_t *mddev)
 	}
 	printk("raid0: done.\n");
 	return 0;
+ abort:
+	vfree(conf->strip_zone);
+	return 1;
 }
 
 static int raid0_run (mddev_t *mddev)
@@ -132,11 +173,6 @@ static int raid0_run (mddev_t *mddev)
 		goto out;
 	mddev->private = (void *)conf;
  
-	if (md_check_ordering(mddev)) {
-		printk("raid0: disks are not ordered, aborting!\n");
-		goto out_free_conf;
-	}
-
 	if (create_strip_zones (mddev)) 
 		goto out_free_conf;
 
@@ -225,8 +261,9 @@ static int raid0_stop (mddev_t *mddev)
  * Of course, those facts may not be valid anymore (and surely won't...)
  * Hey guys, there's some work out there ;-)
  */
-static int raid0_make_request (mddev_t *mddev, int rw, struct bio *bio)
+static int raid0_make_request (request_queue_t *q, struct bio *bio)
 {
+	mddev_t *mddev = q->queuedata;
 	unsigned int sect_in_chunk, chunksize_bits,  chunk_size;
 	raid0_conf_t *conf = mddev_to_conf(mddev);
 	struct raid0_hash *hash;
@@ -234,7 +271,7 @@ static int raid0_make_request (mddev_t *mddev, int rw, struct bio *bio)
 	mdk_rdev_t *tmp_dev;
 	unsigned long chunk, block, rsect;
 
-	chunk_size = mddev->param.chunk_size >> 10;
+	chunk_size = mddev->sb->chunk_size >> 10;
 	chunksize_bits = ffz(~chunk_size);
 	block = bio->bi_sector >> 1;
 	hash = conf->hash_table + block / conf->smallest->size;
@@ -323,7 +360,7 @@ static int raid0_status (char *page, mddev_t *mddev)
 				conf->strip_zone[j].size);
 	}
 #endif
-	sz += sprintf(page + sz, " %dk chunks", mddev->param.chunk_size/1024);
+	sz += sprintf(page + sz, " %dk chunks", mddev->sb->chunk_size/1024);
 	return sz;
 }
 

drivers/md/raid1.c

@@ -334,7 +334,7 @@ static int read_balance(conf_t *conf, struct bio *bio, r1bio_t *r1_bio)
 	 * device if no resync is going on, or below the resync window.
 	 * We take the first readable disk when above the resync window.
 	 */
-	if (conf->resync_mirrors && (this_sector + sectors >= conf->next_resync)) {
+	if (!conf->mddev->in_sync && (this_sector + sectors >= conf->next_resync)) {
 		/* make sure that disk is operational */
 		new_disk = 0;
 		while (!conf->mirrors[new_disk].operational || conf->mirrors[new_disk].write_only) {
@@ -434,8 +434,9 @@ static void resume_device(conf_t *conf)
 	spin_unlock_irq(&conf->resync_lock);
 }
 
-static int make_request(mddev_t *mddev, int rw, struct bio * bio)
+static int make_request(request_queue_t *q, struct bio * bio)
 {
+	mddev_t *mddev = q->queuedata;
 	conf_t *conf = mddev_to_conf(mddev);
 	mirror_info_t *mirror;
 	r1bio_t *r1_bio;
@@ -456,20 +457,16 @@ static int make_request(mddev_t *mddev, int rw, struct bio * bio)
 	 * make_request() can abort the operation when READA is being
 	 * used and no empty request is available.
 	 *
-	 * Currently, just replace the command with READ.
 	 */
-	if (rw == READA)
-		rw = READ;
-
 	r1_bio = mempool_alloc(conf->r1bio_pool, GFP_NOIO);
 
 	r1_bio->master_bio = bio;
 
 	r1_bio->mddev = mddev;
 	r1_bio->sector = bio->bi_sector;
-	r1_bio->cmd = rw;
+	r1_bio->cmd = bio_data_dir(bio);
 
-	if (rw == READ) {
+	if (r1_bio->cmd == READ) {
 		/*
 		 * read balancing logic:
 		 */
@@ -483,7 +480,7 @@ static int make_request(mddev_t *mddev, int rw, struct bio * bio)
 		read_bio->bi_sector = r1_bio->sector;
 		read_bio->bi_bdev = mirror->bdev;
 		read_bio->bi_end_io = end_request;
-		read_bio->bi_rw = rw;
+		read_bio->bi_rw = r1_bio->cmd;
 		read_bio->bi_private = r1_bio;
 
 		generic_make_request(read_bio);
@@ -507,7 +504,7 @@ static int make_request(mddev_t *mddev, int rw, struct bio * bio)
 		mbio->bi_sector	= r1_bio->sector;
 		mbio->bi_bdev = conf->mirrors[i].bdev;
 		mbio->bi_end_io	= end_request;
-		mbio->bi_rw = rw;
+		mbio->bi_rw = r1_bio->cmd;
 		mbio->bi_private = r1_bio;
 
 		sum_bios++;
@@ -656,6 +653,9 @@ static void close_sync(conf_t *conf)
 	if (conf->barrier) BUG();
 	if (waitqueue_active(&conf->wait_idle)) BUG();
 	if (waitqueue_active(&conf->wait_resume)) BUG();
+
+	mempool_destroy(conf->r1buf_pool);
+	conf->r1buf_pool = NULL;
 }
 
 static int diskop(mddev_t *mddev, mdp_disk_t **d, int state)
@@ -772,7 +772,6 @@ static int diskop(mddev_t *mddev, mdp_disk_t **d, int state)
 	 * Deactivate a spare disk:
 	 */
 	case DISKOP_SPARE_INACTIVE:
-		close_sync(conf);
 		sdisk = conf->mirrors + spare_disk;
 		sdisk->operational = 0;
 		sdisk->write_only = 0;
@@ -785,7 +784,6 @@ static int diskop(mddev_t *mddev, mdp_disk_t **d, int state)
 	 * property)
 	 */
 	case DISKOP_SPARE_ACTIVE:
-		close_sync(conf);
 		sdisk = conf->mirrors + spare_disk;
 		fdisk = conf->mirrors + failed_disk;
 
@@ -919,10 +917,6 @@ static int diskop(mddev_t *mddev, mdp_disk_t **d, int state)
 	}
 abort:
 	spin_unlock_irq(&conf->device_lock);
-	if (state == DISKOP_SPARE_ACTIVE || state == DISKOP_SPARE_INACTIVE) {
-		mempool_destroy(conf->r1buf_pool);
-		conf->r1buf_pool = NULL;
-	}
 
 	print_conf(conf);
 	return err;
@@ -1012,7 +1006,7 @@ static void sync_request_write(mddev_t *mddev, r1bio_t *r1_bio)
 			 * we read from here, no need to write
 			 */
 			continue;
-		if (i < conf->raid_disks && !conf->resync_mirrors)
+		if (i < conf->raid_disks && mddev->in_sync)
 			/*
 			 * don't need to write this we are just rebuilding
 			 */
@@ -1088,7 +1082,6 @@ static void raid1d(void *data)
 		conf = mddev_to_conf(mddev);
 		if (mddev->sb_dirty) {
 			printk(KERN_INFO "raid1: dirty sb detected, updating.\n");
-			mddev->sb_dirty = 0;
 			md_update_sb(mddev);
 		}
 		bio = r1_bio->master_bio;
@@ -1118,31 +1111,6 @@ static void raid1d(void *data)
 	spin_unlock_irqrestore(&retry_list_lock, flags);
 }
 
-/*
- * Private kernel thread to reconstruct mirrors after an unclean
- * shutdown.
- */
-static void raid1syncd(void *data)
-{
-	conf_t *conf = data;
-	mddev_t *mddev = conf->mddev;
-
-	if (!conf->resync_mirrors)
-		return;
-	if (conf->resync_mirrors == 2)
-		return;
-	down(&mddev->recovery_sem);
-	if (!md_do_sync(mddev, NULL)) {
-		/*
-		 * Only if everything went Ok.
-		 */
-		conf->resync_mirrors = 0;
-	}
-
-	close_sync(conf);
-
-	up(&mddev->recovery_sem);
-}
 
 static int init_resync(conf_t *conf)
 {
@@ -1177,9 +1145,16 @@ static int sync_request(mddev_t *mddev, sector_t sector_nr, int go_faster)
 	sector_t max_sector, nr_sectors;
 	int disk, partial;
 
-	if (!sector_nr)
+	if (sector_nr == 0)
 		if (init_resync(conf))
 			return -ENOMEM;
+
+	max_sector = mddev->sb->size << 1;
+	if (sector_nr >= max_sector) {
+		close_sync(conf);
+		return 0;
+	}
+
 	/*
 	 * If there is non-resync activity waiting for us then
 	 * put in a delay to throttle resync.
@@ -1216,10 +1191,6 @@ static int sync_request(mddev_t *mddev, sector_t sector_nr, int go_faster)
 	r1_bio->sector = sector_nr;
 	r1_bio->cmd = SPECIAL;
 
-	max_sector = mddev->sb->size << 1;
-	if (sector_nr >= max_sector)
-		BUG();
-
 	bio = r1_bio->master_bio;
 	nr_sectors = RESYNC_BLOCK_SIZE >> 9;
 	if (max_sector - sector_nr < nr_sectors)
@@ -1302,7 +1273,6 @@ static int run(mddev_t *mddev)
 	mdp_disk_t *descriptor;
 	mdk_rdev_t *rdev;
 	struct list_head *tmp;
-	int start_recovery = 0;
 
 	MOD_INC_USE_COUNT;
 
@@ -1454,10 +1424,6 @@ static int run(mddev_t *mddev)
 	conf->last_used = j;
 
 
-	if (conf->working_disks != sb->raid_disks) {
-		printk(KERN_ALERT "raid1: md%d, not all disks are operational -- trying to recover array\n", mdidx(mddev));
-		start_recovery = 1;
-	}
 
 	{
 		const char * name = "raid1d";
@@ -1469,20 +1435,6 @@ static int run(mddev_t *mddev)
 		}
 	}
 
-	if (!start_recovery && !(sb->state & (1 << MD_SB_CLEAN)) &&
-						(conf->working_disks > 1)) {
-		const char * name = "raid1syncd";
-
-		conf->resync_thread = md_register_thread(raid1syncd, conf, name);
-		if (!conf->resync_thread) {
-			printk(THREAD_ERROR, mdidx(mddev));
-			goto out_free_conf;
-		}
-
-		printk(START_RESYNC, mdidx(mddev));
-		conf->resync_mirrors = 1;
-		md_wakeup_thread(conf->resync_thread);
-	}
 
 	/*
 	 * Regenerate the "device is in sync with the raid set" bit for
@@ -1499,10 +1451,6 @@ static int run(mddev_t *mddev)
 	}
 	sb->active_disks = conf->working_disks;
 
-	if (start_recovery)
-		md_recover_arrays();
-
-
 	printk(ARRAY_IS_ACTIVE, mdidx(mddev), sb->active_disks, sb->raid_disks);
 	/*
 	 * Ok, everything is just fine now
@@ -1522,47 +1470,12 @@ static int run(mddev_t *mddev)
 	return -EIO;
 }
 
-static int stop_resync(mddev_t *mddev)
-{
-	conf_t *conf = mddev_to_conf(mddev);
-
-	if (conf->resync_thread) {
-		if (conf->resync_mirrors) {
-			conf->resync_mirrors = 2;
-			md_interrupt_thread(conf->resync_thread);
-
-			printk(KERN_INFO "raid1: mirror resync was not fully finished, restarting next time.\n");
-			return 1;
-		}
-		return 0;
-	}
-	return 0;
-}
-
-static int restart_resync(mddev_t *mddev)
-{
-	conf_t *conf = mddev_to_conf(mddev);
-
-	if (conf->resync_mirrors) {
-		if (!conf->resync_thread) {
-			MD_BUG();
-			return 0;
-		}
-		conf->resync_mirrors = 1;
-		md_wakeup_thread(conf->resync_thread);
-		return 1;
-	}
-	return 0;
-}
-
 static int stop(mddev_t *mddev)
 {
 	conf_t *conf = mddev_to_conf(mddev);
 	int i;
 
 	md_unregister_thread(conf->thread);
-	if (conf->resync_thread)
-		md_unregister_thread(conf->resync_thread);
 	if (conf->r1bio_pool)
 		mempool_destroy(conf->r1bio_pool);
 	for (i = 0; i < MD_SB_DISKS; i++)
@@ -1583,8 +1496,6 @@ static mdk_personality_t raid1_personality =
 	status:		status,
 	error_handler:	error,
 	diskop:		diskop,
-	stop_resync:	stop_resync,
-	restart_resync:	restart_resync,
 	sync_request:	sync_request
 };
 

drivers/md/raid5.c

@@ -634,7 +634,6 @@ static void copy_data(int frombio, struct bio *bio,
 		else 
 			page_offset = (signed)(sector - bio->bi_sector) * -512;
 		bio_for_each_segment(bvl, bio, i) {
-			char *ba = __bio_kmap(bio, i);
 			int len = bio_iovec_idx(bio,i)->bv_len;
 			int clen;
 			int b_offset = 0;			
@@ -649,13 +648,16 @@ static void copy_data(int frombio, struct bio *bio,
 				clen = STRIPE_SIZE - page_offset;	
 			else clen = len;
 			
-			if (len > 0) {
+			if (clen > 0) {
+				char *ba = __bio_kmap(bio, i);
 				if (frombio)
 					memcpy(pa+page_offset, ba+b_offset, clen);
 				else
 					memcpy(ba+b_offset, pa+page_offset, clen);
-			}
-			__bio_kunmap(bio, i);
+				__bio_kunmap(bio, i);
+			}	
+			if (clen < len) /* hit end of page */
+				break;
 			page_offset +=  len;
 		}
 	}
@@ -810,6 +812,8 @@ static void add_stripe_bio (struct stripe_head *sh, struct bio *bi, int dd_idx,
 	spin_unlock_irq(&conf->device_lock);
 	spin_unlock(&sh->lock);
 
+	PRINTK("added bi b#%lu to stripe s#%lu, disk %d.\n", bi->bi_sector, sh->sector, dd_idx);
+
 	if (forwrite) {
 		/* check if page is coverred */
 		sector_t sector = sh->dev[dd_idx].sector;
@@ -823,8 +827,6 @@ static void add_stripe_bio (struct stripe_head *sh, struct bio *bi, int dd_idx,
 		if (sector >= sh->dev[dd_idx].sector + STRIPE_SECTORS)
 			set_bit(R5_OVERWRITE, &sh->dev[dd_idx].flags);
 	}
-
-	PRINTK("added bi b#%lu to stripe s#%lu, disk %d.\n", bi->bi_sector, sh->sector, dd_idx);
 }
 
 
@@ -1036,7 +1038,7 @@ static void handle_stripe(struct stripe_head *sh)
 				    ) &&
 			    !test_bit(R5_UPTODATE, &dev->flags)) {
 				if (conf->disks[i].operational 
-/*				    && !(conf->resync_parity && i == sh->pd_idx) */
+/*				    && !(!mddev->insync && i == sh->pd_idx) */
 					)
 					rmw++;
 				else rmw += 2*disks;  /* cannot read it */
@@ -1226,14 +1228,15 @@ static inline void raid5_activate_delayed(raid5_conf_t *conf)
 }
 static void raid5_unplug_device(void *data)
 {
-	raid5_conf_t *conf = (raid5_conf_t *)data;
+	request_queue_t *q = data;
+	mddev_t *mddev = q->queuedata;
+	raid5_conf_t *conf = mddev_to_conf(mddev);
 	unsigned long flags;
 
 	spin_lock_irqsave(&conf->device_lock, flags);
 
-	raid5_activate_delayed(conf);
-	
-	conf->plugged = 0;
+	if (blk_remove_plug(q))
+		raid5_activate_delayed(conf);
 	md_wakeup_thread(conf->thread);
 
 	spin_unlock_irqrestore(&conf->device_lock, flags);
@@ -1242,31 +1245,21 @@ static void raid5_unplug_device(void *data)
 static inline void raid5_plug_device(raid5_conf_t *conf)
 {
 	spin_lock_irq(&conf->device_lock);
-	if (list_empty(&conf->delayed_list))
-		if (!conf->plugged) {
-			conf->plugged = 1;
-			queue_task(&conf->plug_tq, &tq_disk);
-		}
+	blk_plug_device(&conf->mddev->queue);
 	spin_unlock_irq(&conf->device_lock);
 }
 
-static int make_request (mddev_t *mddev, int rw, struct bio * bi)
+static int make_request (request_queue_t *q, struct bio * bi)
 {
-	raid5_conf_t *conf = (raid5_conf_t *) mddev->private;
+	mddev_t *mddev = q->queuedata;
+	raid5_conf_t *conf = mddev_to_conf(mddev);
 	const unsigned int raid_disks = conf->raid_disks;
 	const unsigned int data_disks = raid_disks - 1;
 	unsigned int dd_idx, pd_idx;
 	sector_t new_sector;
 	sector_t logical_sector, last_sector;
-	int read_ahead = 0;
-
 	struct stripe_head *sh;
 
-	if (rw == READA) {
-		rw = READ;
-		read_ahead=1;
-	}
-
 	logical_sector = bi->bi_sector & ~(STRIPE_SECTORS-1);
 	last_sector = bi->bi_sector + (bi->bi_size>>9);
 
@@ -1281,10 +1274,10 @@ static int make_request (mddev_t *mddev, int rw, struct bio * bi)
 		PRINTK("raid5: make_request, sector %ul logical %ul\n", 
 		       new_sector, logical_sector);
 
-		sh = get_active_stripe(conf, new_sector, pd_idx, read_ahead);
+		sh = get_active_stripe(conf, new_sector, pd_idx, (bi->bi_rw&RWA_MASK));
 		if (sh) {
 
-			add_stripe_bio(sh, bi, dd_idx, rw);
+			add_stripe_bio(sh, bi, dd_idx, (bi->bi_rw&RW_MASK));
 
 			raid5_plug_device(conf);
 			handle_stripe(sh);
@@ -1311,6 +1304,10 @@ static int sync_request (mddev_t *mddev, sector_t sector_nr, int go_faster)
 	int raid_disks = conf->raid_disks;
 	int data_disks = raid_disks-1;
 
+	if (sector_nr >= mddev->sb->size <<1)
+		/* just being told to finish up .. nothing to do */
+		return 0;
+
 	first_sector = raid5_compute_sector(stripe*data_disks*sectors_per_chunk
 		+ chunk_offset, raid_disks, data_disks, &dd_idx, &pd_idx, conf);
 	sh = get_active_stripe(conf, sector_nr, pd_idx, 0);
@@ -1343,17 +1340,15 @@ static void raid5d (void *data)
 
 	handled = 0;
 
-	if (mddev->sb_dirty) {
-		mddev->sb_dirty = 0;
+	if (mddev->sb_dirty)
 		md_update_sb(mddev);
-	}
 	spin_lock_irq(&conf->device_lock);
 	while (1) {
 		struct list_head *first;
 
 		if (list_empty(&conf->handle_list) &&
 		    atomic_read(&conf->preread_active_stripes) < IO_THRESHOLD &&
-		    !conf->plugged &&
+		    !blk_queue_plugged(&mddev->queue) &&
 		    !list_empty(&conf->delayed_list))
 			raid5_activate_delayed(conf);
 
@@ -1382,31 +1377,6 @@ static void raid5d (void *data)
 	PRINTK("--- raid5d inactive\n");
 }
 
-/*
- * Private kernel thread for parity reconstruction after an unclean
- * shutdown. Reconstruction on spare drives in case of a failed drive
- * is done by the generic mdsyncd.
- */
-static void raid5syncd (void *data)
-{
-	raid5_conf_t *conf = data;
-	mddev_t *mddev = conf->mddev;
-
-	if (!conf->resync_parity)
-		return;
-	if (conf->resync_parity == 2)
-		return;
-	down(&mddev->recovery_sem);
-	if (md_do_sync(mddev,NULL)) {
-		up(&mddev->recovery_sem);
-		printk("raid5: resync aborted!\n");
-		return;
-	}
-	conf->resync_parity = 0;
-	up(&mddev->recovery_sem);
-	printk("raid5: resync finished.\n");
-}
-
 static int run (mddev_t *mddev)
 {
 	raid5_conf_t *conf;
@@ -1416,7 +1386,6 @@ static int run (mddev_t *mddev)
 	mdk_rdev_t *rdev;
 	struct disk_info *disk;
 	struct list_head *tmp;
-	int start_recovery = 0;
 
 	MOD_INC_USE_COUNT;
 
@@ -1444,10 +1413,7 @@ static int run (mddev_t *mddev)
 	atomic_set(&conf->active_stripes, 0);
 	atomic_set(&conf->preread_active_stripes, 0);
 
-	conf->plugged = 0;
-	conf->plug_tq.sync = 0;
-	conf->plug_tq.routine = &raid5_unplug_device;
-	conf->plug_tq.data = conf;
+	mddev->queue.unplug_fn = raid5_unplug_device;
 
 	PRINTK("raid5: run(md%d) called.\n", mdidx(mddev));
 
@@ -1571,9 +1537,10 @@ static int run (mddev_t *mddev)
 		goto abort;
 	}
 
-	if (conf->working_disks != sb->raid_disks) {
-		printk(KERN_ALERT "raid5: md%d, not all disks are operational -- trying to recover array\n", mdidx(mddev));
-		start_recovery = 1;
+	if (conf->failed_disks == 1 &&
+	    !(sb->state & (1<<MD_SB_CLEAN))) {
+		printk(KERN_ERR "raid5: cannot start dirty degraded array for md%d\n", mdidx(mddev));
+		goto abort;
 	}
 
 	{
@@ -1587,10 +1554,11 @@ static int run (mddev_t *mddev)
 	}
 
 	memory = conf->max_nr_stripes * (sizeof(struct stripe_head) +
-		 conf->raid_disks * ((sizeof(struct buffer_head) + PAGE_SIZE))) / 1024;
+		 conf->raid_disks * ((sizeof(struct bio) + PAGE_SIZE))) / 1024;
 	if (grow_stripes(conf, conf->max_nr_stripes)) {
 		printk(KERN_ERR "raid5: couldn't allocate %dkB for buffers\n", memory);
 		shrink_stripes(conf);
+		md_unregister_thread(conf->thread);
 		goto abort;
 	} else
 		printk(KERN_INFO "raid5: allocated %dkB for md%d\n", memory, mdidx(mddev));
@@ -1615,23 +1583,6 @@ static int run (mddev_t *mddev)
 	else
 		printk(KERN_ALERT "raid5: raid level %d set md%d active with %d out of %d devices, algorithm %d\n", conf->level, mdidx(mddev), sb->active_disks, sb->raid_disks, conf->algorithm);
 
-	if (!start_recovery && !(sb->state & (1 << MD_SB_CLEAN))) {
-		const char * name = "raid5syncd";
-
-		conf->resync_thread = md_register_thread(raid5syncd, conf,name);
-		if (!conf->resync_thread) {
-			printk(KERN_ERR "raid5: couldn't allocate thread for md%d\n", mdidx(mddev));
-			goto abort;
-		}
-
-		printk("raid5: raid set md%d not clean; reconstructing parity\n", mdidx(mddev));
-		conf->resync_parity = 1;
-		md_wakeup_thread(conf->resync_thread);
-	}
-
-	print_raid5_conf(conf);
-	if (start_recovery)
-		md_recover_arrays();
 	print_raid5_conf(conf);
 
 	/* Ok, everything is just fine now */
@@ -1650,48 +1601,12 @@ static int run (mddev_t *mddev)
 	return -EIO;
 }
 
-static int stop_resync (mddev_t *mddev)
-{
-	raid5_conf_t *conf = mddev_to_conf(mddev);
-	mdk_thread_t *thread = conf->resync_thread;
-
-	if (thread) {
-		if (conf->resync_parity) {
-			conf->resync_parity = 2;
-			md_interrupt_thread(thread);
-			printk(KERN_INFO "raid5: parity resync was not fully finished, restarting next time.\n");
-			return 1;
-		}
-		return 0;
-	}
-	return 0;
-}
-
-static int restart_resync (mddev_t *mddev)
-{
-	raid5_conf_t *conf = mddev_to_conf(mddev);
-
-	if (conf->resync_parity) {
-		if (!conf->resync_thread) {
-			MD_BUG();
-			return 0;
-		}
-		printk("raid5: waking up raid5resync.\n");
-		conf->resync_parity = 1;
-		md_wakeup_thread(conf->resync_thread);
-		return 1;
-	} else
-		printk("raid5: no restart-resync needed.\n");
-	return 0;
-}
 
 
 static int stop (mddev_t *mddev)
 {
 	raid5_conf_t *conf = (raid5_conf_t *) mddev->private;
 
-	if (conf->resync_thread)
-		md_unregister_thread(conf->resync_thread);
 	md_unregister_thread(conf->thread);
 	shrink_stripes(conf);
 	free_pages((unsigned long) conf->stripe_hashtbl, HASH_PAGES_ORDER);
@@ -2066,8 +1981,6 @@ static mdk_personality_t raid5_personality=
 	status:		status,
 	error_handler:	error,
 	diskop:		diskop,
-	stop_resync:	stop_resync,
-	restart_resync:	restart_resync,
 	sync_request:	sync_request
 };
 

drivers/net/8139cp.c

@@ -100,13 +100,16 @@ MODULE_PARM_DESC (multicast_filter_limit, "8139cp maximum number of filtered mul
 #define CP_DEF_MSG_ENABLE	(NETIF_MSG_DRV		| \
 				 NETIF_MSG_PROBE 	| \
 				 NETIF_MSG_LINK)
+#define CP_NUM_STATS		14	/* struct cp_dma_stats, plus one */
+#define CP_STATS_SIZE		64	/* size in bytes of DMA stats block */
 #define CP_REGS_SIZE		(0xff + 1)
 #define CP_REGS_VER		1		/* version 1 */
 #define CP_RX_RING_SIZE		64
 #define CP_TX_RING_SIZE		64
 #define CP_RING_BYTES		\
 		((sizeof(struct cp_desc) * CP_RX_RING_SIZE) +	\
-		(sizeof(struct cp_desc) * CP_TX_RING_SIZE))
+		 (sizeof(struct cp_desc) * CP_TX_RING_SIZE) +	\
+		 CP_STATS_SIZE)
 #define NEXT_TX(N)		(((N) + 1) & (CP_TX_RING_SIZE - 1))
 #define NEXT_RX(N)		(((N) + 1) & (CP_RX_RING_SIZE - 1))
 #define TX_BUFFS_AVAIL(CP)					\
@@ -135,6 +138,7 @@ enum {
 	/* NIC register offsets */
 	MAC0		= 0x00,	/* Ethernet hardware address. */
 	MAR0		= 0x08,	/* Multicast filter. */
+	StatsAddr	= 0x10,	/* 64-bit start addr of 64-byte DMA stats blk */
 	TxRingAddr	= 0x20, /* 64-bit start addr of Tx ring */
 	HiTxRingAddr	= 0x28, /* 64-bit start addr of high priority Tx ring */
 	Cmd		= 0x37, /* Command register */
@@ -197,6 +201,9 @@ enum {
 	RxErrLong	= (1 << 21), /* Rx error, packet > 4096 bytes */
 	RxErrFIFO	= (1 << 22), /* Rx error, FIFO overflowed, pkt bad */
 
+	/* StatsAddr register */
+	DumpStats	= (1 << 3),  /* Begin stats dump */
+
 	/* RxConfig register */
 	RxCfgFIFOShift	= 13,	     /* Shift, to get Rx FIFO thresh value */
 	RxCfgDMAShift	= 8,	     /* Shift, to get Rx Max DMA value */
@@ -284,6 +291,22 @@ struct ring_info {
 	unsigned		frag;
 };
 
+struct cp_dma_stats {
+	u64			tx_ok;
+	u64			rx_ok;
+	u64			tx_err;
+	u32			rx_err;
+	u16			rx_fifo;
+	u16			frame_align;
+	u32			tx_ok_1col;
+	u32			tx_ok_mcol;
+	u64			rx_ok_phys;
+	u64			rx_ok_bcast;
+	u32			rx_ok_mcast;
+	u16			tx_abort;
+	u16			tx_underrun;
+} __attribute__((packed));
+
 struct cp_extra_stats {
 	unsigned long		rx_frags;
 };
@@ -312,6 +335,8 @@ struct cp_private {
 
 	struct net_device_stats net_stats;
 	struct cp_extra_stats	cp_stats;
+	struct cp_dma_stats	*nic_stats;
+	dma_addr_t		nic_stats_dma;
 
 	struct pci_dev		*pdev;
 	u32			rx_config;
@@ -373,6 +398,26 @@ static struct pci_device_id cp_pci_tbl[] __devinitdata = {
 };
 MODULE_DEVICE_TABLE(pci, cp_pci_tbl);
 
+static struct {
+	const char str[ETH_GSTRING_LEN];
+} ethtool_stats_keys[] = {
+	{ "tx_ok" },
+	{ "rx_ok" },
+	{ "tx_err" },
+	{ "rx_err" },
+	{ "rx_fifo" },
+	{ "frame_align" },
+	{ "tx_ok_1col" },
+	{ "tx_ok_mcol" },
+	{ "rx_ok_phys" },
+	{ "rx_ok_bcast" },
+	{ "rx_ok_mcast" },
+	{ "tx_abort" },
+	{ "tx_underrun" },
+	{ "rx_frags" },
+};
+
+
 static inline void cp_set_rxbufsize (struct cp_private *cp)
 {
 	unsigned int mtu = cp->dev->mtu;
@@ -949,9 +994,9 @@ static void cp_init_hw (struct cp_private *cp)
 	cpw32_f(HiTxRingAddr + 4, 0);
 
 	cpw32_f(RxRingAddr, cp->ring_dma);
-	cpw32_f(RxRingAddr + 4, 0);
+	cpw32_f(RxRingAddr + 4, 0);		/* FIXME: 64-bit PCI */
 	cpw32_f(TxRingAddr, cp->ring_dma + (sizeof(struct cp_desc) * CP_RX_RING_SIZE));
-	cpw32_f(TxRingAddr + 4, 0);
+	cpw32_f(TxRingAddr + 4, 0);		/* FIXME: 64-bit PCI */
 
 	cpw16(MultiIntr, 0);
 
@@ -1010,10 +1055,19 @@ static int cp_init_rings (struct cp_private *cp)
 
 static int cp_alloc_rings (struct cp_private *cp)
 {
-	cp->rx_ring = pci_alloc_consistent(cp->pdev, CP_RING_BYTES, &cp->ring_dma);
-	if (!cp->rx_ring)
+	void *mem;
+
+	mem = pci_alloc_consistent(cp->pdev, CP_RING_BYTES, &cp->ring_dma);
+	if (!mem)
 		return -ENOMEM;
+
+	cp->rx_ring = mem;
 	cp->tx_ring = &cp->rx_ring[CP_RX_RING_SIZE];
+
+	mem += (CP_RING_BYTES - CP_STATS_SIZE);
+	cp->nic_stats = mem;
+	cp->nic_stats_dma = cp->ring_dma + (CP_RING_BYTES - CP_STATS_SIZE);
+
 	return cp_init_rings(cp);
 }
 
@@ -1052,6 +1106,7 @@ static void cp_free_rings (struct cp_private *cp)
 	pci_free_consistent(cp->pdev, CP_RING_BYTES, cp->rx_ring, cp->ring_dma);
 	cp->rx_ring = NULL;
 	cp->tx_ring = NULL;
+	cp->nic_stats = NULL;
 }
 
 static int cp_open (struct net_device *dev)
@@ -1181,6 +1236,7 @@ static int cp_ethtool_ioctl (struct cp_private *cp, void *useraddr)
 		strcpy (info.version, DRV_VERSION);
 		strcpy (info.bus_info, cp->pdev->slot_name);
 		info.regdump_len = CP_REGS_SIZE;
+		info.n_stats = CP_NUM_STATS;
 		if (copy_to_user (useraddr, &info, sizeof (info)))
 			return -EFAULT;
 		return 0;
@@ -1359,6 +1415,83 @@ static int cp_ethtool_ioctl (struct cp_private *cp, void *useraddr)
 		return 0;
 	}
 
+	/* get string list(s) */
+	case ETHTOOL_GSTRINGS: {
+		struct ethtool_gstrings estr = { ETHTOOL_GSTRINGS };
+
+		if (copy_from_user(&estr, useraddr, sizeof(estr)))
+			return -EFAULT;
+		if (estr.string_set != ETH_SS_STATS)
+			return -EINVAL;
+
+		estr.len = CP_NUM_STATS;
+		if (copy_to_user(useraddr, &estr, sizeof(estr)))
+			return -EFAULT;
+		if (copy_to_user(useraddr + sizeof(estr),
+				 &ethtool_stats_keys,
+				 sizeof(ethtool_stats_keys)))
+			return -EFAULT;
+		return 0;
+	}
+
+	/* get NIC-specific statistics */
+	case ETHTOOL_GSTATS: {
+		struct ethtool_stats estats = { ETHTOOL_GSTATS };
+		u64 *tmp_stats;
+		unsigned int work = 100;
+		const unsigned int sz = sizeof(u64) * CP_NUM_STATS;
+		int i;
+
+		/* begin NIC statistics dump */
+		cpw32(StatsAddr + 4, 0); /* FIXME: 64-bit PCI */
+		cpw32(StatsAddr, cp->nic_stats_dma | DumpStats);
+		cpr32(StatsAddr);
+
+		estats.n_stats = CP_NUM_STATS;
+		if (copy_to_user(useraddr, &estats, sizeof(estats)))
+			return -EFAULT;
+
+		while (work-- > 0) {
+			if ((cpr32(StatsAddr) & DumpStats) == 0)
+				break;
+			cpu_relax();
+		}
+
+		if (cpr32(StatsAddr) & DumpStats)
+			return -EIO;
+
+		tmp_stats = kmalloc(sz, GFP_KERNEL);
+		if (!tmp_stats)
+			return -ENOMEM;
+		memset(tmp_stats, 0, sz);
+
+		i = 0;
+		tmp_stats[i++] = le64_to_cpu(cp->nic_stats->tx_ok);
+		tmp_stats[i++] = le64_to_cpu(cp->nic_stats->rx_ok);
+		tmp_stats[i++] = le64_to_cpu(cp->nic_stats->tx_err);
+		tmp_stats[i++] = le32_to_cpu(cp->nic_stats->rx_err);
+		tmp_stats[i++] = le16_to_cpu(cp->nic_stats->rx_fifo);
+		tmp_stats[i++] = le16_to_cpu(cp->nic_stats->frame_align);
+		tmp_stats[i++] = le32_to_cpu(cp->nic_stats->tx_ok_1col);
+		tmp_stats[i++] = le32_to_cpu(cp->nic_stats->tx_ok_mcol);
+		tmp_stats[i++] = le64_to_cpu(cp->nic_stats->rx_ok_phys);
+		tmp_stats[i++] = le64_to_cpu(cp->nic_stats->rx_ok_bcast);
+		tmp_stats[i++] = le32_to_cpu(cp->nic_stats->rx_ok_mcast);
+		tmp_stats[i++] = le16_to_cpu(cp->nic_stats->tx_abort);
+		tmp_stats[i++] = le16_to_cpu(cp->nic_stats->tx_underrun);
+		tmp_stats[i++] = cp->cp_stats.rx_frags;
+		if (i != CP_NUM_STATS)
+			BUG();
+
+		i = copy_to_user(useraddr + sizeof(estats),
+				 tmp_stats, sz);
+		kfree(tmp_stats);
+
+		if (i)
+			return -EFAULT;
+		return 0;
+	}
+
 	default:
 		break;
 	}

drivers/net/dl2k.c

 /*  D-Link DL2000-based Gigabit Ethernet Adapter Linux driver */
 /*
-    Copyright (c) 2001,2002 by D-Link Corporation
+    Copyright (c) 2001, 2002 by D-Link Corporation
     Written by Edward Peng.<edward_peng@dlink.com.tw>
     Created 03-May-2001, base on Linux' sundance.c.
 
@@ -33,12 +33,13 @@
     1.11	2002/05/23	Added ISR schedule scheme.
     				Fixed miscount of rx frame error for DGE-550SX.
     				Fixed VLAN bug.
+    1.12	2002/06/13	Lock tx_coalesce=1 on 10/100Mbps mode.
  */
 
 #include "dl2k.h"
 
 static char version[] __devinitdata =
-    KERN_INFO "D-Link DL2000-based linux driver v1.11 2002/05/23\n";
+    KERN_INFO "D-Link DL2000-based linux driver v1.12 2002/06/13\n";
 
 #define MAX_UNITS 8
 static int mtu[MAX_UNITS];
@@ -138,15 +139,15 @@ rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 	SET_MODULE_OWNER (dev);
 
-#ifdef USE_IO_OPS
-	ioaddr = pci_resource_start (pdev, 0);
-#else
+#ifdef MEM_MAPPING
 	ioaddr = pci_resource_start (pdev, 1);
 	ioaddr = (long) ioremap (ioaddr, RIO_IO_SIZE);
 	if (!ioaddr) {
 		err = -ENOMEM;
 		goto err_out_dev;
 	}
+#else
+	ioaddr = pci_resource_start (pdev, 0);
 #endif
 	dev->base_addr = ioaddr;
 	dev->irq = irq;
@@ -158,6 +159,7 @@ rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	/* Parse manual configuration */
 	np->an_enable = 1;
+	np->tx_coalesce = 1;
 	if (card_idx < MAX_UNITS) {
 		if (media[card_idx] != NULL) {
 			np->an_enable = 0;
@@ -213,7 +215,7 @@ rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent)
 
 		if (tx_coalesce < 1)
 			tx_coalesce = 1;
-		if (tx_coalesce > TX_RING_SIZE-1)
+		else if (tx_coalesce > TX_RING_SIZE-1)
 			tx_coalesce = TX_RING_SIZE - 1;
 	}
 	dev->open = &rio_open;
@@ -303,7 +305,7 @@ rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent)
       err_out_unmap_tx:
 	pci_free_consistent (pdev, TX_TOTAL_SIZE, np->tx_ring, np->tx_ring_dma);
       err_out_iounmap:
-#ifndef USE_IO_OPS
+#ifdef MEM_MAPPING
 	iounmap ((void *) ioaddr);
 
       err_out_dev:
@@ -361,7 +363,7 @@ parse_eeprom (struct net_device *dev)
 	}
 
 	/* Check CRC */
-	crc = ~ether_crc_le(256 - 4, sromdata);
+	crc = ~ether_crc_le (256 - 4, sromdata);
 	if (psrom->crc != crc) {
 		printk (KERN_ERR "%s: EEPROM data CRC error.\n", dev->name);
 		return -1;
@@ -636,7 +638,7 @@ start_xmit (struct sk_buff *skb, struct net_device *dev)
 
 	/* DL2K bug: DMA fails to get next descriptor ptr in 10Mbps mode
 	 * Work around: Always use 1 descriptor in 10Mbps mode */
-	if (entry % tx_coalesce == 0 || np->speed == 10)
+	if (entry % np->tx_coalesce == 0 || np->speed == 10)
 		txdesc->status = cpu_to_le64 (entry | tfc_vlan_tag |
 					      WordAlignDisable | 
 					      TxDMAIndicate |
@@ -936,6 +938,10 @@ rio_error (struct net_device *dev, int int_status)
 				mii_get_media_pcs (dev);
 			else
 				mii_get_media (dev);
+			if (np->speed == 1000)
+				np->tx_coalesce = tx_coalesce;
+			else 
+				np->tx_coalesce = 1;
 			macctrl = 0;
 			macctrl |= (np->vlan) ? AutoVLANuntagging : 0;
 			macctrl |= (np->full_duplex) ? DuplexSelect : 0;
@@ -1671,7 +1677,7 @@ rio_remove1 (struct pci_dev *pdev)
 				     np->rx_ring_dma);
 		pci_free_consistent (pdev, TX_TOTAL_SIZE, np->tx_ring,
 				     np->tx_ring_dma);
-#ifndef USE_IO_OPS
+#ifdef MEM_MAPPING
 		iounmap ((char *) (dev->base_addr));
 #endif
 		kfree (dev);

drivers/net/dl2k.h

@@ -33,15 +33,15 @@
 #include <linux/delay.h>
 #include <linux/spinlock.h>
 #include <linux/time.h>
-#define TX_RING_SIZE	128
-#define TX_QUEUE_LEN	120	/* Limit ring entries actually used.  */
-#define RX_RING_SIZE 	128
+#define TX_RING_SIZE	256
+#define TX_QUEUE_LEN	(TX_RING_SIZE - 1) /* Limit ring entries actually used.*/
+#define RX_RING_SIZE 	256
 #define TX_TOTAL_SIZE	TX_RING_SIZE*sizeof(struct netdev_desc)
 #define RX_TOTAL_SIZE	RX_RING_SIZE*sizeof(struct netdev_desc)
 
 /* This driver was written to use PCI memory space, however x86-oriented
    hardware often uses I/O space accesses. */
-#ifdef USE_IO_OPS
+#ifndef MEM_MAPPING
 #undef readb
 #undef readw
 #undef readl
@@ -658,6 +658,7 @@ struct netdev_private {
 	unsigned int chip_id;		/* PCI table chip id */
 	unsigned int rx_coalesce; 	/* Maximum frames each RxDMAComplete intr */
 	unsigned int rx_timeout; 	/* Wait time between RxDMAComplete intr */
+	unsigned int tx_coalesce;	/* Maximum frames each tx interrupt */
 	unsigned int full_duplex:1;	/* Full-duplex operation requested. */
 	unsigned int an_enable:2;	/* Auto-Negotiated Enable */
 	unsigned int jumbo:1;		/* Jumbo frame enable */
@@ -681,10 +682,10 @@ struct netdev_private {
 };
 
 /* The station address location in the EEPROM. */
-#ifdef USE_IO_OPS
-#define PCI_IOTYPE (PCI_USES_MASTER | PCI_USES_IO  | PCI_ADDR0)
-#else
+#ifdef MEM_MAPPING
 #define PCI_IOTYPE (PCI_USES_MASTER | PCI_USES_MEM | PCI_ADDR1)
+#else
+#define PCI_IOTYPE (PCI_USES_MASTER | PCI_USES_IO  | PCI_ADDR0)
 #endif
 /* The struct pci_device_id consist of:
         vendor, device          Vendor and device ID to match (or PCI_ANY_ID)

drivers/usb/class/usb-midi.c

@@ -106,9 +106,7 @@ MODULE_PARM_DESC(ulangid, "The optional preferred USB Language ID for all device
 
 MODULE_AUTHOR("NAGANO Daisuke <breeze.nagano@nifty.ne.jp>");
 MODULE_DESCRIPTION("USB-MIDI driver");
-#if LINUX_VERSION_CODE  >= KERNEL_VERSION(2,4,14)
 MODULE_LICENSE("GPL");
-#endif
 
 /* ------------------------------------------------------------------------- */
 

drivers/usb/host/ohci-dbg.c

@@ -74,9 +74,9 @@ static void urb_print (struct urb * urb, char * str, int small)
 static inline struct ed *
 dma_to_ed (struct ohci_hcd *hc, dma_addr_t ed_dma);
 
-#ifdef OHCI_VERBOSE_DEBUG
 /* print non-empty branches of the periodic ed tree */
-void ohci_dump_periodic (struct ohci_hcd *ohci, char *label)
+static void __attribute__ ((unused))
+ohci_dump_periodic (struct ohci_hcd *ohci, char *label)
 {
 	int i, j;
 	u32 *ed_p;
@@ -101,7 +101,6 @@ void ohci_dump_periodic (struct ohci_hcd *ohci, char *label)
 		printk (KERN_DEBUG "%s, ohci %s, empty periodic schedule\n",
 				label, ohci->hcd.self.bus_name);
 }
-#endif
 
 static void ohci_dump_intr_mask (char *label, __u32 mask)
 {
@@ -241,6 +240,97 @@ static void ohci_dump (struct ohci_hcd *controller, int verbose)
 	ohci_dump_roothub (controller, 1);
 }
 
+static void ohci_dump_td (char *label, struct td *td)
+{
+	u32	tmp = le32_to_cpup (&td->hwINFO);
+
+	dbg ("%s td %p; urb %p index %d; hw next td %08x",
+		label, td,
+		td->urb, td->index,
+		le32_to_cpup (&td->hwNextTD));
+	if ((tmp & TD_ISO) == 0) {
+		char	*toggle, *pid;
+		u32	cbp, be;
+
+		switch (tmp & TD_T) {
+		case TD_T_DATA0: toggle = "DATA0"; break;
+		case TD_T_DATA1: toggle = "DATA1"; break;
+		case TD_T_TOGGLE: toggle = "(CARRY)"; break;
+		default: toggle = "(?)"; break;
+		}
+		switch (tmp & TD_DP) {
+		case TD_DP_SETUP: pid = "SETUP"; break;
+		case TD_DP_IN: pid = "IN"; break;
+		case TD_DP_OUT: pid = "OUT"; break;
+		default: pid = "(bad pid)"; break;
+		}
+		dbg ("     info %08x CC=%x %s DI=%d %s %s", tmp,
+			TD_CC_GET(tmp), /* EC, */ toggle,
+			(tmp & TD_DI) >> 21, pid,
+			(tmp & TD_R) ? "R" : "");
+		cbp = le32_to_cpup (&td->hwCBP);
+		be = le32_to_cpup (&td->hwBE);
+		dbg ("     cbp %08x be %08x (len %d)", cbp, be,
+			cbp ? (be + 1 - cbp) : 0);
+	} else {
+		unsigned	i;
+		dbg ("     info %08x CC=%x DI=%d START=%04x", tmp,
+			TD_CC_GET(tmp), /* FC, */
+			(tmp & TD_DI) >> 21,
+			tmp & 0x0000ffff);
+		dbg ("     bp0 %08x be %08x",
+			le32_to_cpup (&td->hwCBP) & ~0x0fff,
+			le32_to_cpup (&td->hwBE));
+		for (i = 0; i < MAXPSW; i++) {
+			dbg ("       psw [%d] = %2x", i,
+				le16_to_cpu (td->hwPSW [i]));
+		}
+	}
+}
+
+/* caller MUST own hcd spinlock if verbose is set! */
+static void __attribute__((unused))
+ohci_dump_ed (struct ohci_hcd *ohci, char *label, struct ed *ed, int verbose)
+{
+	u32	tmp = ed->hwINFO;
+	char	*type = "";
+
+	dbg ("%s: %s, ed %p state 0x%x type %d; next ed %08x",
+		ohci->hcd.self.bus_name, label,
+		ed, ed->state, ed->type,
+		le32_to_cpup (&ed->hwNextED));
+	switch (tmp & (ED_IN|ED_OUT)) {
+	case ED_OUT: type = "-OUT"; break;
+	case ED_IN: type = "-IN"; break;
+	/* else from TDs ... control */
+	}
+	dbg ("  info %08x MAX=%d%s%s%s EP=%d%s DEV=%d", le32_to_cpu (tmp),
+		0x0fff & (le32_to_cpu (tmp) >> 16),
+		(tmp & ED_ISO) ? " ISO" : "",
+		(tmp & ED_SKIP) ? " SKIP" : "",
+		(tmp & ED_LOWSPEED) ? " LOW" : "",
+		0x000f & (le32_to_cpu (tmp) >> 7),
+		type,
+		0x007f & le32_to_cpu (tmp));
+	dbg ("  tds: head %08x%s%s tail %08x%s",
+		tmp = le32_to_cpup (&ed->hwHeadP),
+		(ed->hwHeadP & ED_H) ? " HALT" : "",
+		(ed->hwHeadP & ED_C) ? " CARRY" : "",
+		le32_to_cpup (&ed->hwTailP),
+		verbose ? "" : " (not listing)");
+	if (verbose) {
+		struct list_head	*tmp;
+
+		/* use ed->td_list because HC concurrently modifies
+		 * hwNextTD as it accumulates ed_donelist.
+		 */
+		list_for_each (tmp, &ed->td_list) {
+			struct td		*td;
+			td = list_entry (tmp, struct td, td_list);
+			ohci_dump_td ("  ->", td);
+		}
+	}
+}
 
 #endif
 

drivers/usb/host/ohci-hcd.c

@@ -100,7 +100,7 @@
  *	- lots more testing!!
  */
 
-#define DRIVER_VERSION "2002-Jun-10"
+#define DRIVER_VERSION "2002-Jun-15"
 #define DRIVER_AUTHOR "Roman Weissgaerber <weissg@vienna.at>, David Brownell"
 #define DRIVER_DESC "USB 1.1 'Open' Host Controller (OHCI) Driver"
 
@@ -145,8 +145,8 @@ static int ohci_urb_enqueue (
 	urb_print (urb, "SUB", usb_pipein (pipe));
 #endif
 	
-	/* every endpoint has a ed, locate and fill it */
-	if (! (ed = ep_add_ed (urb->dev, pipe, urb->interval, 1, mem_flags)))
+	/* every endpoint has a ed, locate and maybe (re)initialize it */
+	if (! (ed = ed_get (ohci, urb->dev, pipe, urb->interval)))
 		return -ENOMEM;
 
 	/* for the private part of the URB we need the number of TDs (size) */
@@ -498,6 +498,7 @@ static void ohci_irq (struct usb_hcd *hcd)
 	struct ohci_regs	*regs = ohci->regs;
  	int			ints; 
 
+	/* we can eliminate a (slow) readl() if _only_ WDH caused this irq */
 	if ((ohci->hcca->done_head != 0)
 			&& ! (le32_to_cpup (&ohci->hcca->done_head) & 0x01)) {
 		ints =  OHCI_INTR_WDH;

drivers/usb/host/ohci-mem.c

@@ -221,6 +221,7 @@ ed_alloc (struct ohci_hcd *hc, int mem_flags)
 	ed = pci_pool_alloc (hc->ed_cache, mem_flags, &dma);
 	if (ed) {
 		memset (ed, 0, sizeof (*ed));
+		INIT_LIST_HEAD (&ed->td_list);
 		ed->dma = dma;
 		/* hash it for later reverse mapping */
 		if (!hash_add_ed (hc, ed, mem_flags)) {

drivers/usb/host/ohci-q.c

@@ -131,8 +131,9 @@ static void intr_resub (struct ohci_hcd *hc, struct urb *urb)
 
 /* search for the right branch to insert an interrupt ed into the int tree 
  * do some load balancing;
- * returns the branch and 
- * sets the interval to interval = 2^integer (ld (interval))
+ * returns the branch
+ * FIXME allow for failure, when there's no bandwidth left;
+ * and consider iso loads too
  */
 static int ep_int_balance (struct ohci_hcd *ohci, int interval, int load)
 {
@@ -152,19 +153,6 @@ static int ep_int_balance (struct ohci_hcd *ohci, int interval, int load)
 
 /*-------------------------------------------------------------------------*/
 
-/*  2^int ( ld (inter)) */
-
-static int ep_2_n_interval (int inter)
-{	
-	int	i;
-
-	for (i = 0; ((inter >> i) > 1 ) && (i < 5); i++)
-		continue;
-	return 1 << i;
-}
-
-/*-------------------------------------------------------------------------*/
-
 /* the int tree is a binary tree 
  * in order to process it sequentially the indexes of the branches have
  * to be mapped the mapping reverses the bits of a word of num_bits length
@@ -230,8 +218,7 @@ static int ep_link (struct ohci_hcd *ohci, struct ed *edi)
 
 	case PIPE_INTERRUPT:
 		load = ed->intriso.intr_info.int_load;
-		interval = ep_2_n_interval (ed->intriso.intr_info.int_period);
-		ed->interval = interval;
+		interval = ed->interval;
 		int_branch = ep_int_balance (ohci, interval, load);
 		ed->intriso.intr_info.int_branch = int_branch;
 
@@ -301,6 +288,7 @@ static void periodic_unlink (
  * just the link to the ed is unlinked.
  * the link from the ed still points to another operational ed or 0
  * so the HC can eventually finish the processing of the unlinked ed
+ * caller guarantees the ED has no active TDs.
  */
 static int start_ed_unlink (struct ohci_hcd *ohci, struct ed *ed) 
 {
@@ -387,84 +375,99 @@ static int start_ed_unlink (struct ohci_hcd *ohci, struct ed *ed)
 
 /*-------------------------------------------------------------------------*/
 
-/* (re)init an endpoint; this _should_ be done once at the
- * usb_set_configuration command, but the USB stack is a bit stateless
- * so we do it at every transaction.
- * if the state of the ed is ED_NEW then a dummy td is added and the
- * state is changed to ED_UNLINK
- * in all other cases the state is left unchanged
- * the ed info fields are set even though most of them should
- * not change
+/* get and maybe (re)init an endpoint. init _should_ be done only as part
+ * of usb_set_configuration() or usb_set_interface() ... but the USB stack
+ * isn't very stateful, so we re-init whenever the HC isn't looking.
  */
-static struct ed *ep_add_ed (
+static struct ed *ed_get (
+	struct ohci_hcd		*ohci,
 	struct usb_device	*udev,
 	unsigned int		pipe,
-	int			interval,
-	int			load,
-	int			mem_flags
+	int			interval
 ) {
-   	struct ohci_hcd		*ohci = hcd_to_ohci (udev->bus->hcpriv);
+	int			is_out = !usb_pipein (pipe);
+	int			type = usb_pipetype (pipe);
+	int			bus_msecs = 0;
 	struct hcd_dev		*dev = (struct hcd_dev *) udev->hcpriv;
-	struct td		*td;
 	struct ed		*ed; 
 	unsigned		ep;
 	unsigned long		flags;
 
-	spin_lock_irqsave (&ohci->lock, flags);
-
 	ep = usb_pipeendpoint (pipe) << 1;
-	if (!usb_pipecontrol (pipe) && usb_pipeout (pipe))
+	if (type != PIPE_CONTROL && is_out)
 		ep |= 1;
+	if (type == PIPE_INTERRUPT)
+		bus_msecs = usb_calc_bus_time (udev->speed, !is_out, 0,
+			usb_maxpacket (udev, pipe, is_out)) / 1000;
+
+	spin_lock_irqsave (&ohci->lock, flags);
+
 	if (!(ed = dev->ep [ep])) {
 		ed = ed_alloc (ohci, SLAB_ATOMIC);
 		if (!ed) {
 			/* out of memory */
-			spin_unlock_irqrestore (&ohci->lock, flags);
-			return NULL;
+			goto done;
 		}
 		dev->ep [ep] = ed;
 	}
 
 	if (ed->state & ED_URB_DEL) {
 		/* pending unlink request */
-		spin_unlock_irqrestore (&ohci->lock, flags);
-		return NULL;
+		ed = 0;
+		goto done;
 	}
 
 	if (ed->state == ED_NEW) {
+		struct td		*td;
+
 		ed->hwINFO = ED_SKIP;
   		/* dummy td; end of td list for ed */
 		td = td_alloc (ohci, SLAB_ATOMIC);
  		if (!td) {
 			/* out of memory */
-			spin_unlock_irqrestore (&ohci->lock, flags);
-			return NULL;
+			ed = 0;
+			goto done;
 		}
 		ed->dummy = td;
 		ed->hwTailP = cpu_to_le32 (td->td_dma);
 		ed->hwHeadP = ed->hwTailP;	/* ED_C, ED_H zeroed */
 		ed->state = ED_UNLINK;
-		ed->type = usb_pipetype (pipe);
+		ed->type = type;
 	}
 
-// FIXME:  don't do this if it's linked to the HC, or without knowing it's
-// safe to clobber state/mode info tied to (previous) config/altsetting.
-// (but dev0/ep0, used by set_address, must get clobbered)
-
-	ed->hwINFO = cpu_to_le32 (usb_pipedevice (pipe)
-			| usb_pipeendpoint (pipe) << 7
-			| (usb_pipeisoc (pipe)? 0x8000: 0)
-			| (usb_pipecontrol (pipe)
-				? 0: (usb_pipeout (pipe)? 0x800: 0x1000)) 
-			| (udev->speed == USB_SPEED_LOW) << 13
-			| usb_maxpacket (udev, pipe, usb_pipeout (pipe))
-				<< 16);
-
-  	if (ed->type == PIPE_INTERRUPT && ed->state == ED_UNLINK) {
-  		ed->intriso.intr_info.int_period = interval;
-  		ed->intriso.intr_info.int_load = load;
-  	}
+	/* FIXME:  Don't do this without knowing it's safe to clobber this
+	 * state/mode info.  Currently the upper layers don't support such
+	 * guarantees; we're lucky changing config/altsetting is rare.
+	 */
+  	if (ed->state == ED_UNLINK) {
+		u32	info;
+
+		info = usb_pipedevice (pipe);
+		info |= (ep >> 1) << 7;
+		info |= usb_maxpacket (udev, pipe, is_out) << 16;
+		info = cpu_to_le32 (info);
+		if (udev->speed == USB_SPEED_LOW)
+			info |= ED_LOWSPEED;
+		/* control transfers store pids in tds */
+		if (type != PIPE_CONTROL) {
+			info |= is_out ? ED_OUT : ED_IN;
+			if (type == PIPE_ISOCHRONOUS)
+				info |= ED_ISO;
+			if (type == PIPE_INTERRUPT) {
+				ed->intriso.intr_info.int_load = bus_msecs;
+				if (interval > 32)
+					interval = 32;
+			}
+		}
+		ed->hwINFO = info;
 
+		/* value ignored except on periodic EDs, where
+		 * we know it's already a power of 2
+		 */
+		ed->interval = interval;
+	}
+
+done:
 	spin_unlock_irqrestore (&ohci->lock, flags);
 	return ed; 
 }
@@ -736,8 +739,8 @@ static void td_done (struct urb *urb, struct td *td)
 		urb->iso_frame_desc [td->index].status = cc_to_error [cc];
 
 		if (cc != 0)
-			dbg ("  urb %p iso TD %d len %d CC %d",
-				urb, td->index, dlen, cc);
+			dbg ("  urb %p iso TD %p (%d) len %d CC %d",
+				urb, td, 1 + td->index, dlen, cc);
 
 	/* BULK, INT, CONTROL ... drivers see aggregate length/status,
 	 * except that "setup" bytes aren't counted and "short" transfers
@@ -776,9 +779,13 @@ static void td_done (struct urb *urb, struct td *td)
 					- td->data_dma;
 		}
 
+#ifdef VERBOSE_DEBUG
 		if (cc != 0)
-			dbg ("  urb %p TD %d CC %d, len=%d",
-				urb, td->index, cc, urb->actual_length);
+			dbg ("  urb %p TD %p (%d) CC %d, len=%d/%d",
+				urb, td, 1 + td->index, cc,
+				urb->actual_length,
+				urb->transfer_buffer_length);
+#endif
   	}
 }
 
@@ -812,8 +819,8 @@ static struct td *dl_reverse_done_list (struct ohci_hcd *ohci)
 				if (urb_priv && ((td_list->index + 1)
 						< urb_priv->length)) {
 #ifdef OHCI_VERBOSE_DEBUG
-					dbg ("urb %p TD %d of %d, patch ED",
-						td_list->urb,
+					dbg ("urb %p TD %p (%d/%d), patch ED",
+						td_list->urb, td_list,
 						1 + td_list->index,
 						urb_priv->length);
 #endif

drivers/usb/host/ohci.h

@@ -19,7 +19,7 @@ struct ed {
 #define ED_SKIP		__constant_cpu_to_le32(1 << 14)
 #define ED_LOWSPEED	__constant_cpu_to_le32(1 << 13)
 #define ED_OUT		__constant_cpu_to_le32(0x01 << 11)
-#define ED_IN		__constant_cpu_to_le32(0x10 << 11)
+#define ED_IN		__constant_cpu_to_le32(0x02 << 11)
 	__u32			hwTailP;	/* tail of TD list */
 	__u32			hwHeadP;	/* head of TD list */
 #define ED_C		__constant_cpu_to_le32(0x02)	/* toggle carry */
@@ -30,24 +30,24 @@ struct ed {
 	dma_addr_t		dma;		/* addr of ED */
 	struct ed		*ed_prev;	/* for non-interrupt EDs */
 	struct td		*dummy;
+	struct list_head	td_list;	/* "shadow list" of our TDs */
+
+	u8			state;		/* ED_{NEW,UNLINK,OPER} */
+#define ED_NEW 		0x00		/* unused, no dummy td */
+#define ED_UNLINK 	0x01		/* dummy td, maybe linked to hc */
+#define ED_OPER		0x02		/* dummy td, _is_ linked to hc */
+#define ED_URB_DEL  	0x08		/* for unlinking; masked in */
 
 	u8			type; 		/* PIPE_{BULK,...} */
-	u8			interval;	/* interrupt, isochronous */
+	u16			interval;	/* interrupt, isochronous */
 	union {
 		struct intr_info {		/* interrupt */
-			u8	int_period;
 			u8	int_branch;
 			u8	int_load; 
 		} intr_info;
 		u16		last_iso;	/* isochronous */
 	} intriso;
 
-	u8			state;		/* ED_{NEW,UNLINK,OPER} */
-#define ED_NEW 		0x00		/* unused, no dummy td */
-#define ED_UNLINK 	0x01		/* dummy td, maybe linked to hc */
-#define ED_OPER		0x02		/* dummy td, _is_ linked to hc */
-#define ED_URB_DEL  	0x08		/* for unlinking; masked in */
-
 	/* HC may see EDs on rm_list until next frame (frame_no == tick) */
 	u16			tick;
 	struct ed		*ed_rm_list;
@@ -108,6 +108,8 @@ struct td {
 
 	dma_addr_t	td_dma;		/* addr of this TD */
 	dma_addr_t	data_dma;	/* addr of data it points to */
+
+	struct list_head td_list;	/* "shadow list", TDs on same ED */
 } __attribute__ ((aligned(32)));	/* c/b/i need 16; only iso needs 32 */
 
 #define TD_MASK	((u32)~0x1f)		/* strip hw status in low addr bits */

drivers/usb/net/kaweth.c

@@ -220,10 +220,11 @@ struct kaweth_device
 	struct urb *rx_urb;
 	struct urb *tx_urb;
 	struct urb *irq_urb;
+	
+	struct sk_buff *tx_skb;
 
 	__u8 *firmware_buf;
 	__u8 scratch[KAWETH_SCRATCH_SIZE];
-	__u8 tx_buf[KAWETH_BUF_SIZE];
 	__u8 rx_buf[KAWETH_BUF_SIZE];
 	__u8 intbuffer[INTBUFFERSIZE];
 	__u16 packet_filter_bitmap;
@@ -650,11 +651,13 @@ static int kaweth_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
 static void kaweth_usb_transmit_complete(struct urb *urb)
 {
 	struct kaweth_device *kaweth = urb->context;
+	struct sk_buff *skb = kaweth->tx_skb;
 
 	if (unlikely(urb->status != 0))
 		kaweth_dbg("%s: TX status %d.", kaweth->net->name, urb->status);
 
 	netif_wake_queue(kaweth->net);
+	dev_kfree_skb(skb);
 }
 
 /****************************************************************
@@ -663,7 +666,7 @@ static void kaweth_usb_transmit_complete(struct urb *urb)
 static int kaweth_start_xmit(struct sk_buff *skb, struct net_device *net)
 {
 	struct kaweth_device *kaweth = net->priv;
-	int count = skb->len;
+	char *private_header;
 
 	int res;
 
@@ -679,15 +682,30 @@ static int kaweth_start_xmit(struct sk_buff *skb, struct net_device *net)
 	kaweth_async_set_rx_mode(kaweth);
 	netif_stop_queue(net);
 
-	*((__u16 *)kaweth->tx_buf) = cpu_to_le16(skb->len);
+	/* We now decide whether we can put our special header into the sk_buff */
+	if (skb_cloned(skb) || skb_headroom(skb) < 2) {
+		/* no such luck - we make our own */
+		struct sk_buff *copied_skb;
+		copied_skb = skb_copy_expand(skb, 2, 0, GFP_ATOMIC);
+		dev_kfree_skb_any(skb);
+		skb = copied_skb;
+		if (!copied_skb) {
+			kaweth->stats.tx_errors++;
+			netif_start_queue(net);
+			spin_unlock(&kaweth->device_lock);
+			return 0;
+		}
+	}
 
-	memcpy(kaweth->tx_buf + 2, skb->data, skb->len);
+	private_header = __skb_push(skb, 2);
+	*private_header = cpu_to_le16(skb->len);
+	kaweth->tx_skb = skb;
 
 	FILL_BULK_URB(kaweth->tx_urb,
 		      kaweth->dev,
 		      usb_sndbulkpipe(kaweth->dev, 2),
-		      kaweth->tx_buf,
-		      count + 2,
+		      private_header,
+		      skb->len,
 		      kaweth_usb_transmit_complete,
 		      kaweth);
 	kaweth->end = 0;
@@ -699,6 +717,7 @@ static int kaweth_start_xmit(struct sk_buff *skb, struct net_device *net)
 		kaweth->stats.tx_errors++;
 
 		netif_start_queue(net);
+		dev_kfree_skb(skb);
 	}
 	else
 	{
@@ -707,8 +726,6 @@ static int kaweth_start_xmit(struct sk_buff *skb, struct net_device *net)
 		net->trans_start = jiffies;
 	}
 
-	dev_kfree_skb(skb);
-
 	spin_unlock(&kaweth->device_lock);
 
 	return 0;

drivers/usb/storage/scsiglue.c

@@ -51,12 +51,6 @@
 
 #include <linux/slab.h>
 
-/*
- * kernel thread actions
- */
-
-#define US_ACT_COMMAND		1
-#define US_ACT_EXIT		5
 
 /***********************************************************************
  * Host functions 
@@ -204,7 +198,7 @@ static int device_reset( Scsi_Cmnd *srb )
 	US_DEBUGP("device_reset() called\n" );
 
 	/* if the device was removed, then we're already reset */
-	if (atomic_read(&us->sm_state) == US_STATE_DETACHED)
+	if (!test_bit(DEV_ATTACHED, &us->bitflags))
 		return SUCCESS;
 
 	scsi_unlock(srb->host);
@@ -235,7 +229,7 @@ static int bus_reset( Scsi_Cmnd *srb )
 	US_DEBUGP("bus_reset() called\n");
 
 	/* if the device has been removed, this worked */
-	if (atomic_read(&us->sm_state) == US_STATE_DETACHED) {
+	if (!test_bit(DEV_ATTACHED, &us->bitflags)) {
 		US_DEBUGP("-- device removed already\n");
 		return SUCCESS;
 	}
@@ -337,8 +331,8 @@ static int proc_info (char *buffer, char **start, off_t offset, int length,
 
 	/* show the GUID of the device */
 	SPRINTF("         GUID: " GUID_FORMAT "\n", GUID_ARGS(us->guid));
-	SPRINTF("     Attached: %s\n", (atomic_read(&us->sm_state) ==
-			US_STATE_DETACHED) ? "Yes" : "No");
+	SPRINTF("     Attached: %s\n", (test_bit(DEV_ATTACHED, &us->bitflags)
+			? "Yes" : "No"));
 
 	/*
 	 * Calculate start of next buffer, and return value.

drivers/usb/storage/usb.c

@@ -99,13 +99,6 @@ MODULE_LICENSE("GPL");
 
 static int my_host_number;
 
-/*
- * kernel thread actions
- */
-
-#define US_ACT_COMMAND		1
-#define US_ACT_EXIT		5
-
 /* The list of structures and the protective lock for them */
 struct us_data *us_list;
 struct semaphore us_list_semaphore;
@@ -426,7 +419,7 @@ static int usb_stor_control_thread(void * __us)
 		down(&(us->dev_semaphore));
 
 		/* our device has gone - pretend not ready */
-		if (atomic_read(&us->device_state) == US_STATE_DETACHED) {
+		if (!test_bit(DEV_ATTACHED, &us->bitflags)) {
 			US_DEBUGP("Request is for removed device\n");
 			/* For REQUEST_SENSE, it's the data.  But
 			 * for anything else, it should look like
@@ -450,7 +443,7 @@ static int usb_stor_control_thread(void * __us)
 				       sizeof(usb_stor_sense_notready));
 				us->srb->result = CHECK_CONDITION << 1;
 			}
-		} else { /* atomic_read(&us->device_state) == STATE_DETACHED */
+		} else { /* test_bit(DEV_ATTACHED, &us->bitflags) */
 
 			/* Handle those devices which need us to fake 
 			 * their inquiry data */
@@ -557,9 +550,8 @@ static void * storage_probe(struct usb_device *dev, unsigned int ifnum,
 	unsigned int flags;
 	struct us_unusual_dev *unusual_dev;
 	struct us_data *ss = NULL;
-#ifdef CONFIG_USB_STORAGE_SDDR09
 	int result;
-#endif
+	int new_device = 0;
 
 	/* these are temporary copies -- we test on these, then put them
 	 * in the us-data structure 
@@ -570,13 +562,13 @@ static void * storage_probe(struct usb_device *dev, unsigned int ifnum,
 	u8 subclass = 0;
 	u8 protocol = 0;
 
-	/* the altsettting on the interface we're probing that matched our
+	/* the altsetting on the interface we're probing that matched our
 	 * usb_match_id table
 	 */
 	struct usb_interface *intf = dev->actconfig->interface;
 	struct usb_interface_descriptor *altsetting =
 		intf[ifnum].altsetting + intf[ifnum].act_altsetting;
-	US_DEBUGP("act_altsettting is %d\n", intf[ifnum].act_altsetting);
+	US_DEBUGP("act_altsetting is %d\n", intf[ifnum].act_altsetting);
 
 	/* clear the temporary strings */
 	memset(mf, 0, sizeof(mf));
@@ -663,7 +655,7 @@ static void * storage_probe(struct usb_device *dev, unsigned int ifnum,
 		return NULL;
 	}
 
-	/* At this point, we're committed to using the device */
+	/* At this point, we've decided to try to use the device */
 	usb_get_dev(dev);
 
 	/* clear the GUID and fetch the strings */
@@ -696,7 +688,8 @@ static void * storage_probe(struct usb_device *dev, unsigned int ifnum,
 	 */
 	ss = us_list;
 	while ((ss != NULL) && 
-	       ((ss->pusb_dev) || !GUID_EQUAL(guid, ss->guid)))
+	           (test_bit(DEV_ATTACHED, &ss->bitflags) ||
+		    !GUID_EQUAL(guid, ss->guid)))
 		ss = ss->next;
 
 	if (ss != NULL) {
@@ -710,29 +703,23 @@ static void * storage_probe(struct usb_device *dev, unsigned int ifnum,
 		/* establish the connection to the new device upon reconnect */
 		ss->ifnum = ifnum;
 		ss->pusb_dev = dev;
-		atomic_set(&ss->device_state, US_STATE_ATTACHED);
+		set_bit(DEV_ATTACHED, &ss->bitflags);
 
 		/* copy over the endpoint data */
-		if (ep_in)
-			ss->ep_in = ep_in->bEndpointAddress & 
-				USB_ENDPOINT_NUMBER_MASK;
-		if (ep_out)
-			ss->ep_out = ep_out->bEndpointAddress & 
-				USB_ENDPOINT_NUMBER_MASK;
+		ss->ep_in = ep_in->bEndpointAddress & 
+			USB_ENDPOINT_NUMBER_MASK;
+		ss->ep_out = ep_out->bEndpointAddress & 
+			USB_ENDPOINT_NUMBER_MASK;
 		ss->ep_int = ep_int;
 
 		/* allocate an IRQ callback if one is needed */
-		if ((ss->protocol == US_PR_CBI) && usb_stor_allocate_irq(ss)) {
-			usb_put_dev(dev);
-			return NULL;
-		}
+		if ((ss->protocol == US_PR_CBI) && usb_stor_allocate_irq(ss))
+			goto BadDevice;
 
 		/* allocate the URB we're going to use */
 		ss->current_urb = usb_alloc_urb(0, GFP_KERNEL);
-		if (!ss->current_urb) {
-			usb_put_dev(dev);
-			return NULL;
-		}
+		if (!ss->current_urb)
+			goto BadDevice;
 
                 /* Re-Initialize the device if it needs it */
 		if (unusual_dev && unusual_dev->initFunction)
@@ -752,14 +739,12 @@ static void * storage_probe(struct usb_device *dev, unsigned int ifnum,
 			return NULL;
 		}
 		memset(ss, 0, sizeof(struct us_data));
+		new_device = 1;
 
 		/* allocate the URB we're going to use */
 		ss->current_urb = usb_alloc_urb(0, GFP_KERNEL);
-		if (!ss->current_urb) {
-			kfree(ss);
-			usb_put_dev(dev);
-			return NULL;
-		}
+		if (!ss->current_urb)
+			goto BadDevice;
 
 		/* Initialize the mutexes only when the struct is new */
 		init_completion(&(ss->notify));
@@ -776,12 +761,10 @@ static void * storage_probe(struct usb_device *dev, unsigned int ifnum,
 		ss->unusual_dev = unusual_dev;
 
 		/* copy over the endpoint data */
-		if (ep_in)
-			ss->ep_in = ep_in->bEndpointAddress & 
-				USB_ENDPOINT_NUMBER_MASK;
-		if (ep_out)
-			ss->ep_out = ep_out->bEndpointAddress & 
-				USB_ENDPOINT_NUMBER_MASK;
+		ss->ep_in = ep_in->bEndpointAddress & 
+			USB_ENDPOINT_NUMBER_MASK;
+		ss->ep_out = ep_out->bEndpointAddress & 
+			USB_ENDPOINT_NUMBER_MASK;
 		ss->ep_int = ep_int;
 
 		/* establish the connection to the new device */
@@ -904,12 +887,8 @@ static void * storage_probe(struct usb_device *dev, unsigned int ifnum,
 #endif
 
 		default:
-			ss->transport_name = "Unknown";
-			kfree(ss->current_urb);
-			kfree(ss);
-			usb_put_dev(dev);
-			return NULL;
-			break;
+			/* ss->transport_name = "Unknown"; */
+			goto BadDevice;
 		}
 		US_DEBUGP("Transport: %s\n", ss->transport_name);
 
@@ -959,22 +938,14 @@ static void * storage_probe(struct usb_device *dev, unsigned int ifnum,
 #endif
 
 		default:
-			ss->protocol_name = "Unknown";
-			kfree(ss->current_urb);
-			kfree(ss);
-			usb_put_dev(dev);
-			return NULL;
-			break;
+			/* ss->protocol_name = "Unknown"; */
+			goto BadDevice;
 		}
 		US_DEBUGP("Protocol: %s\n", ss->protocol_name);
 
 		/* allocate an IRQ callback if one is needed */
-		if ((ss->protocol == US_PR_CBI) && usb_stor_allocate_irq(ss)) {
-			kfree(ss->current_urb);
-			kfree(ss);
-			usb_put_dev(dev);
-			return NULL;
-		}
+		if ((ss->protocol == US_PR_CBI) && usb_stor_allocate_irq(ss))
+			goto BadDevice;
 
 		/*
 		 * Since this is a new device, we need to generate a scsi 
@@ -1001,16 +972,13 @@ static void * storage_probe(struct usb_device *dev, unsigned int ifnum,
 
 		/* start up our control thread */
 		atomic_set(&ss->sm_state, US_STATE_IDLE);
-		atomic_set(&ss->device_state, US_STATE_ATTACHED);
+		set_bit(DEV_ATTACHED, &ss->bitflags);
 		ss->pid = kernel_thread(usb_stor_control_thread, ss,
 					CLONE_VM);
 		if (ss->pid < 0) {
 			printk(KERN_WARNING USB_STORAGE 
 			       "Unable to start control thread\n");
-			kfree(ss->current_urb);
-			kfree(ss);
-			usb_put_dev(dev);
-			return NULL;
+			goto BadDevice;
 		}
 
 		/* wait for the thread to start */
@@ -1018,7 +986,17 @@ static void * storage_probe(struct usb_device *dev, unsigned int ifnum,
 
 		/* now register	 - our detect function will be called */
 		ss->htmplt.module = THIS_MODULE;
-		scsi_register_host(&(ss->htmplt));
+		result = scsi_register_host(&(ss->htmplt));
+		if (result) {
+			printk(KERN_WARNING USB_STORAGE
+				"Unable to register the scsi host\n");
+
+			/* tell the control thread to exit */
+			ss->action = US_ACT_EXIT;
+			up(&ss->sema);
+			wait_for_completion(&ss->notify);
+			goto BadDevice;
+		}
 
 		/* lock access to the data structures */
 		down(&us_list_semaphore);
@@ -1038,6 +1016,31 @@ static void * storage_probe(struct usb_device *dev, unsigned int ifnum,
 
 	/* return a pointer for the disconnect function */
 	return ss;
+
+	/* we come here if there are any problems */
+	BadDevice:
+	US_DEBUGP("storage_probe() failed\n");
+	down(&ss->irq_urb_sem);
+	if (ss->irq_urb) {
+		usb_unlink_urb(ss->irq_urb);
+		usb_free_urb(ss->irq_urb);
+		ss->irq_urb = NULL;
+	}
+	up(&ss->irq_urb_sem);
+	if (ss->current_urb) {
+		usb_unlink_urb(ss->current_urb);
+		usb_free_urb(ss->current_urb);
+		ss->current_urb = NULL;
+	}
+
+	clear_bit(DEV_ATTACHED, &ss->bitflags);
+	ss->pusb_dev = NULL;
+	if (new_device)
+		kfree(ss);
+	else
+		up(&ss->dev_semaphore);
+	usb_put_dev(dev);
+	return NULL;
 }
 
 /* Handle a disconnect event from the USB core */
@@ -1078,7 +1081,7 @@ static void storage_disconnect(struct usb_device *dev, void *ptr)
 	/* mark the device as gone */
 	usb_put_dev(ss->pusb_dev);
 	ss->pusb_dev = NULL;
-	atomic_set(&ss->sm_state, US_STATE_DETACHED);
+	clear_bit(DEV_ATTACHED, &ss->bitflags);
 
 	/* unlock access to the device data structure */
 	up(&(ss->dev_semaphore));

drivers/usb/storage/usb.h

@@ -103,9 +103,10 @@ struct us_unusual_dev {
 #define US_FL_SCM_MULT_TARG   0x00000020 /* supports multiple targets */
 #define US_FL_FIX_INQUIRY     0x00000040 /* INQUIRY response needs fixing */
 
-/* device attached/detached states */
-#define US_STATE_DETACHED	1
-#define US_STATE_ATTACHED	2
+
+/* kernel thread actions */
+#define US_ACT_COMMAND		1
+#define US_ACT_EXIT		5
 
 /* processing state machine states */
 #define US_STATE_IDLE		1
@@ -127,10 +128,9 @@ struct us_data {
 	/* The device we're working with
 	 * It's important to note:
 	 *    (o) you must hold dev_semaphore to change pusb_dev
-	 *    (o) device_state should change whenever pusb_dev does
+	 *    (o) DEV_ATTACHED in bitflags should change whenever pusb_dev does
 	 */
 	struct semaphore	dev_semaphore;	 /* protect pusb_dev */
-	atomic_t		device_state;	 /* attached or detached */
 	struct usb_device	*pusb_dev;	 /* this usb_device */
 
 	unsigned int		flags;		 /* from filter initially */
@@ -174,6 +174,7 @@ struct us_data {
 	struct semaphore	ip_waitq;	 /* for CBI interrupts	 */
 	unsigned long		bitflags;	 /* single-bit flags:	 */
 #define IP_WANTED	1			 /* is an IRQ expected?	 */
+#define DEV_ATTACHED	2			 /* is the dev. attached?*/
 
 	/* interrupt communications data */
 	struct semaphore	irq_urb_sem;	 /* to protect irq_urb	 */

include/linux/ethtool.h

@@ -39,7 +39,8 @@ struct ethtool_drvinfo {
 	char	bus_info[ETHTOOL_BUSINFO_LEN];	/* Bus info for this IF. */
 				/* For PCI devices, use pci_dev->slot_name. */
 	char	reserved1[32];
-	char	reserved2[20];
+	char	reserved2[16];
+	u32	n_stats;	/* number of u64's from ETHTOOL_GSTATS */
 	u32	testinfo_len;
 	u32	eedump_len;	/* Size of data from ETHTOOL_GEEPROM (bytes) */
 	u32	regdump_len;	/* Size of data from ETHTOOL_GREGS (bytes) */
@@ -242,6 +243,13 @@ struct ethtool_test {
 	u64	data[0];
 };
 
+/* for dumping NIC-specific statistics */
+struct ethtool_stats {
+	u32	cmd;		/* ETHTOOL_GSTATS */
+	u32	n_stats;	/* number of u64's being returned */
+	u64	data[0];
+};
+
 /* CMDs currently supported */
 #define ETHTOOL_GSET		0x00000001 /* Get settings. */
 #define ETHTOOL_SSET		0x00000002 /* Set settings, privileged. */
@@ -272,6 +280,7 @@ struct ethtool_test {
 #define ETHTOOL_TEST		0x0000001a /* execute NIC self-test, priv. */
 #define ETHTOOL_GSTRINGS	0x0000001b /* get specified string set */
 #define ETHTOOL_PHYS_ID		0x0000001c /* identify the NIC */
+#define ETHTOOL_GSTATS		0x0000001d /* get NIC-specific statistics */
 
 /* compatibility with older code */
 #define SPARC_ETH_GSET		ETHTOOL_GSET

include/linux/poll.h

@@ -10,32 +10,13 @@
 #include <linux/mm.h>
 #include <asm/uaccess.h>
 
-#define POLL_INLINE_BYTES 256
-#define FAST_SELECT_MAX  128
-#define FAST_POLL_MAX    128
-#define POLL_INLINE_ENTRIES (1+(POLL_INLINE_BYTES / sizeof(struct poll_table_entry)))
-
-struct poll_table_entry {
-	struct file * filp;
-	wait_queue_t wait;
-	wait_queue_head_t * wait_address;
-};
-
-struct poll_table_page {
-	struct poll_table_page * next;
-	struct poll_table_entry * entry;
-	struct poll_table_entry entries[0];
-};
+struct poll_table_page;
 
 typedef struct poll_table_struct {
 	int error;
 	struct poll_table_page * table;
-	struct poll_table_page inline_page; 
-	struct poll_table_entry inline_table[POLL_INLINE_ENTRIES]; 
 } poll_table;
 
-#define POLL_INLINE_TABLE_LEN (sizeof(poll_table) - offsetof(poll_table, inline_page))
-
 extern void __pollwait(struct file * filp, wait_queue_head_t * wait_address, poll_table *p);
 
 static inline void poll_wait(struct file * filp, wait_queue_head_t * wait_address, poll_table *p)
@@ -49,7 +30,6 @@ static inline void poll_initwait(poll_table* pt)
 	pt->error = 0;
 	pt->table = NULL;
 }
-
 extern void poll_freewait(poll_table* pt);
 
 
@@ -69,6 +49,27 @@ typedef struct {
 #define FDS_LONGS(nr)	(((nr)+FDS_BITPERLONG-1)/FDS_BITPERLONG)
 #define FDS_BYTES(nr)	(FDS_LONGS(nr)*sizeof(long))
 
+/*
+ * We do a VERIFY_WRITE here even though we are only reading this time:
+ * we'll write to it eventually..
+ *
+ * Use "unsigned long" accesses to let user-mode fd_set's be long-aligned.
+ */
+static inline
+int get_fd_set(unsigned long nr, void *ufdset, unsigned long *fdset)
+{
+	nr = FDS_BYTES(nr);
+	if (ufdset) {
+		int error;
+		error = verify_area(VERIFY_WRITE, ufdset, nr);
+		if (!error && __copy_from_user(fdset, ufdset, nr))
+			error = -EFAULT;
+		return error;
+	}
+	memset(fdset, 0, nr);
+	return 0;
+}
+
 static inline
 void set_fd_set(unsigned long nr, void *ufdset, unsigned long *fdset)
 {
@@ -76,6 +77,12 @@ void set_fd_set(unsigned long nr, void *ufdset, unsigned long *fdset)
 		__copy_to_user(ufdset, fdset, FDS_BYTES(nr));
 }
 
+static inline
+void zero_fd_set(unsigned long nr, unsigned long *fdset)
+{
+	memset(fdset, 0, FDS_BYTES(nr));
+}
+
 extern int do_select(int n, fd_set_bits *fds, long *timeout);
 
 #endif /* KERNEL */

include/linux/raid/md.h

@@ -63,8 +63,6 @@
 extern int md_size[MAX_MD_DEVS];
 extern struct hd_struct md_hd_struct[MAX_MD_DEVS];
 
-extern void add_mddev_mapping (mddev_t *mddev, kdev_t dev, void *data);
-extern void del_mddev_mapping (mddev_t *mddev, kdev_t dev);
 extern char * partition_name (kdev_t dev);
 extern inline char * bdev_partition_name (struct block_device *bdev)
 {
@@ -77,14 +75,9 @@ extern mdk_thread_t * md_register_thread (void (*run) (void *data),
 extern void md_unregister_thread (mdk_thread_t *thread);
 extern void md_wakeup_thread(mdk_thread_t *thread);
 extern void md_interrupt_thread (mdk_thread_t *thread);
-extern int md_update_sb (mddev_t *mddev);
-extern int md_do_sync(mddev_t *mddev, mdp_disk_t *spare);
+extern void md_update_sb (mddev_t *mddev);
 extern void md_done_sync(mddev_t *mddev, int blocks, int ok);
 extern void md_sync_acct(kdev_t dev, unsigned long nr_sectors);
-extern void md_recover_arrays (void);
-extern int md_check_ordering (mddev_t *mddev);
-extern int md_notify_reboot(struct notifier_block *this,
-					unsigned long code, void *x);
 extern int md_error (mddev_t *mddev, struct block_device *bdev);
 extern int md_run_setup(void);
 

include/linux/raid/md_k.h

@@ -64,24 +64,6 @@ typedef struct mdk_rdev_s mdk_rdev_t;
 
 #define MAX_MD_DEVS  (1<<MINORBITS)	/* Max number of md dev */
 
-/*
- * Maps a kdev to an mddev/subdev. How 'data' is handled is up to
- * the personality. (eg. HSM uses this to identify individual LVs)
- */
-typedef struct dev_mapping_s {
-	mddev_t *mddev;
-	void *data;
-} dev_mapping_t;
-
-extern dev_mapping_t mddev_map [MAX_MD_DEVS];
-
-static inline mddev_t * kdev_to_mddev (kdev_t dev)
-{
-	if (major(dev) != MD_MAJOR)
-		BUG();
-        return mddev_map[minor(dev)].mddev;
-}
-
 /*
  * options passed in raidrun:
  */
@@ -196,31 +178,38 @@ struct mddev_s
 	mdk_personality_t		*pers;
 	int				__minor;
 	mdp_super_t			*sb;
-	int				nb_dev;
 	struct list_head 		disks;
 	int				sb_dirty;
-	mdu_param_t			param;
 	int				ro;
+
+	struct mdk_thread_s		*sync_thread;	/* doing resync or reconstruct */
 	unsigned long			curr_resync;	/* blocks scheduled */
 	unsigned long			resync_mark;	/* a recent timestamp */
 	unsigned long			resync_mark_cnt;/* blocks written at resync_mark */
-	char				*name;
+	/* recovery_running is 0 for no recovery/resync,
+	 * 1 for active recovery
+	 * 2 for active resync
+	 * -error for an error (e.g. -EINTR)
+	 * it can only be set > 0 under reconfig_sem
+	 */
 	int				recovery_running;
+	int				in_sync;	/* know to not need resync */
 	struct semaphore		reconfig_sem;
-	struct semaphore		recovery_sem;
-	struct semaphore		resync_sem;
 	atomic_t			active;
+	mdp_disk_t			*spare;
 
 	atomic_t			recovery_active; /* blocks scheduled, but not written */
 	wait_queue_head_t		recovery_wait;
 
+	request_queue_t			queue;	/* for plugging ... */
+
 	struct list_head		all_mddevs;
 };
 
 struct mdk_personality_s
 {
 	char *name;
-	int (*make_request)(mddev_t *mddev, int rw, struct bio *bio);
+	int (*make_request)(request_queue_t *q, struct bio *bio);
 	int (*run)(mddev_t *mddev);
 	int (*stop)(mddev_t *mddev);
 	int (*status)(char *page, mddev_t *mddev);
@@ -237,9 +226,6 @@ struct mdk_personality_s
  * SPARE_ACTIVE expects such a change)
  */
 	int (*diskop) (mddev_t *mddev, mdp_disk_t **descriptor, int state);
-
-	int (*stop_resync)(mddev_t *mddev);
-	int (*restart_resync)(mddev_t *mddev);
 	int (*sync_request)(mddev_t *mddev, sector_t sector_nr, int go_faster);
 };
 
@@ -279,13 +265,6 @@ extern mdp_disk_t *get_spare(mddev_t *mddev);
 #define ITERATE_RDEV(mddev,rdev,tmp)					\
 	ITERATE_RDEV_GENERIC((mddev)->disks,same_set,rdev,tmp)
 
-/*
- * Same as above, but assumes that the device has rdev->desc_nr numbered
- * from 0 to mddev->nb_dev, and iterates through rdevs in ascending order.
- */
-#define ITERATE_RDEV_ORDERED(mddev,rdev,i)				\
-	for (i = 0; rdev = find_rdev_nr(mddev, i), i < mddev->nb_dev; i++)
-
 
 /*
  * Iterates through all 'RAID managed disks'
@@ -299,26 +278,6 @@ extern mdp_disk_t *get_spare(mddev_t *mddev);
 #define ITERATE_RDEV_PENDING(rdev,tmp)					\
 	ITERATE_RDEV_GENERIC(pending_raid_disks,pending,rdev,tmp)
 
-/*
- * iterates through all used mddevs in the system.
- */
-#define ITERATE_MDDEV(mddev,tmp)					\
-									\
-	for (tmp = all_mddevs.next;					\
-		mddev = list_entry(tmp, mddev_t, all_mddevs),	\
-			tmp = tmp->next, tmp->prev != &all_mddevs	\
-		; )
-
-static inline int lock_mddev (mddev_t * mddev)
-{
-	return down_interruptible(&mddev->reconfig_sem);
-}
-
-static inline void unlock_mddev (mddev_t * mddev)
-{
-	up(&mddev->reconfig_sem);
-}
-
 #define xchg_values(x,y) do { __typeof__(x) __tmp = x; \
 				x = y; y = __tmp; } while (0)
 

include/linux/raid/raid1.h

@@ -33,8 +33,7 @@ struct r1_private_data_s {
 	int			working_disks;
 	int			last_used;
 	sector_t		next_seq_sect;
-	mdk_thread_t		*thread, *resync_thread;
-	int			resync_mirrors;
+	mdk_thread_t		*thread;
 	mirror_info_t		*spare;
 	spinlock_t		device_lock;
 

include/linux/raid/raid5.h

@@ -177,7 +177,7 @@ struct stripe_head {
  * is put on a "delayed" queue until there are no stripes currently
  * in a pre-read phase.  Further, if the "delayed" queue is empty when
  * a stripe is put on it then we "plug" the queue and do not process it
- * until an unplg call is made. (the tq_disk list is run).
+ * until an unplug call is made. (blk_run_queues is run).
  *
  * When preread is initiated on a stripe, we set PREREAD_ACTIVE and add
  * it to the count of prereading stripes.
@@ -205,12 +205,11 @@ struct disk_info {
 struct raid5_private_data {
 	struct stripe_head	**stripe_hashtbl;
 	mddev_t			*mddev;
-	mdk_thread_t		*thread, *resync_thread;
+	mdk_thread_t		*thread;
 	struct disk_info	disks[MD_SB_DISKS];
 	struct disk_info	*spare;
 	int			chunk_size, level, algorithm;
 	int			raid_disks, working_disks, failed_disks;
-	int			resync_parity;
 	int			max_nr_stripes;
 
 	struct list_head	handle_list; /* stripes needing handling */
@@ -229,9 +228,6 @@ struct raid5_private_data {
 							 * waiting for 25% to be free
 							 */        
 	spinlock_t		device_lock;
-
-	int			plugged;
-	struct tq_struct	plug_tq;
 };
 
 typedef struct raid5_private_data raid5_conf_t;

include/linux/smp.h

@@ -86,6 +86,7 @@ extern volatile int smp_msg_id;
 #define smp_call_function(func,info,retry,wait)	({ 0; })
 static inline void smp_send_reschedule(int cpu) { }
 static inline void smp_send_reschedule_all(void) { }
+#define cpu_online_map				1
 #define cpu_online(cpu)				1
 #define num_online_cpus()			1
 #define __per_cpu_data

kernel/ksyms.c

@@ -459,6 +459,7 @@ EXPORT_SYMBOL(iomem_resource);
 
 /* process management */
 EXPORT_SYMBOL(complete_and_exit);
+EXPORT_SYMBOL(default_wake_function);
 EXPORT_SYMBOL(__wake_up);
 #if CONFIG_SMP
 EXPORT_SYMBOL_GPL(__wake_up_sync); /* internal use only */