i2c: img-scb: Add Imagination Technologies I2C SCB driver

Add support for the IMG I2C Serial Control Bus (SCB) found on the
Pistachio and TZ1090 SoCs.
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
[Ezequiel: code cleaning and rebasing]
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

drivers/i2c/busses/Kconfig

@@ -524,6 +524,16 @@ config I2C_IBM_IIC
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-ibm_iic.
 
+config I2C_IMG
+	tristate "Imagination Technologies I2C SCB Controller"
+	depends on SOC_TZ1090 || COMPILE_TEST
+	help
+	  Say Y here if you want to use the IMG I2C SCB controller,
+	  available on the TZ1090 SoC.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-img-scb.
+
 config I2C_IMX
 	tristate "IMX I2C interface"
 	depends on ARCH_MXC

drivers/i2c/busses/Makefile

@@ -50,6 +50,7 @@ obj-$(CONFIG_I2C_GPIO)		+= i2c-gpio.o
 obj-$(CONFIG_I2C_HIGHLANDER)	+= i2c-highlander.o
 obj-$(CONFIG_I2C_HIX5HD2)	+= i2c-hix5hd2.o
 obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic.o
+obj-$(CONFIG_I2C_IMG)		+= i2c-img-scb.o
 obj-$(CONFIG_I2C_IMX)		+= i2c-imx.o
 obj-$(CONFIG_I2C_IOP3XX)	+= i2c-iop3xx.o
 obj-$(CONFIG_I2C_KEMPLD)	+= i2c-kempld.o