mlx4_core: Add link type autosensing

When a port's link is down (except to driver restart) and the port is
configured for auto sensing, we try to sense port link type (Ethernet
or InfiniBand) in order to determine how to initialize the port.  If
the port type needs to be changed, all mlx4 for the device interfaces
are unregistered and then registered again with the new port
types.  Sensing is done with intervals of 3 seconds.
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

drivers/net/mlx4/Makefile

 obj-$(CONFIG_MLX4_CORE)		+= mlx4_core.o
 
 mlx4_core-y :=	alloc.o catas.o cmd.o cq.o eq.o fw.o icm.o intf.o main.o mcg.o \
-		mr.o pd.o port.o profile.o qp.o reset.o srq.o
+		mr.o pd.o port.o profile.o qp.o reset.o sense.o srq.o
 
 obj-$(CONFIG_MLX4_EN)               += mlx4_en.o
 

drivers/net/mlx4/catas.c

@@ -42,7 +42,6 @@ enum {
 static DEFINE_SPINLOCK(catas_lock);
 
 static LIST_HEAD(catas_list);
-static struct workqueue_struct *catas_wq;
 static struct work_struct catas_work;
 
 static int internal_err_reset = 1;
@@ -77,7 +76,7 @@ static void poll_catas(unsigned long dev_ptr)
 			list_add(&priv->catas_err.list, &catas_list);
 			spin_unlock(&catas_lock);
 
-			queue_work(catas_wq, &catas_work);
+			queue_work(mlx4_wq, &catas_work);
 		}
 	} else
 		mod_timer(&priv->catas_err.timer,
@@ -146,18 +145,7 @@ void mlx4_stop_catas_poll(struct mlx4_dev *dev)
 	spin_unlock_irq(&catas_lock);
 }
 
-int __init mlx4_catas_init(void)
+void  __init mlx4_catas_init(void)
 {
 	INIT_WORK(&catas_work, catas_reset);
-
-	catas_wq = create_singlethread_workqueue("mlx4_err");
-	if (!catas_wq)
-		return -ENOMEM;
-
-	return 0;
-}
-
-void mlx4_catas_cleanup(void)
-{
-	destroy_workqueue(catas_wq);
 }

drivers/net/mlx4/eq.c

@@ -163,6 +163,7 @@ static int mlx4_eq_int(struct mlx4_dev *dev, struct mlx4_eq *eq)
 	int cqn;
 	int eqes_found = 0;
 	int set_ci = 0;
+	int port;
 
 	while ((eqe = next_eqe_sw(eq))) {
 		/*
@@ -203,11 +204,16 @@ static int mlx4_eq_int(struct mlx4_dev *dev, struct mlx4_eq *eq)
 			break;
 
 		case MLX4_EVENT_TYPE_PORT_CHANGE:
-			mlx4_dispatch_event(dev,
-					    eqe->subtype == MLX4_PORT_CHANGE_SUBTYPE_ACTIVE ?
-					    MLX4_DEV_EVENT_PORT_UP :
-					    MLX4_DEV_EVENT_PORT_DOWN,
-					    be32_to_cpu(eqe->event.port_change.port) >> 28);
+			port = be32_to_cpu(eqe->event.port_change.port) >> 28;
+			if (eqe->subtype == MLX4_PORT_CHANGE_SUBTYPE_DOWN) {
+				mlx4_dispatch_event(dev, MLX4_DEV_EVENT_PORT_DOWN,
+						    port);
+				mlx4_priv(dev)->sense.do_sense_port[port] = 1;
+			} else {
+				mlx4_dispatch_event(dev, MLX4_DEV_EVENT_PORT_UP,
+						    port);
+				mlx4_priv(dev)->sense.do_sense_port[port] = 0;
+			}
 			break;
 
 		case MLX4_EVENT_TYPE_CQ_ERROR:

drivers/net/mlx4/main.c

@@ -51,6 +51,8 @@ MODULE_DESCRIPTION("Mellanox ConnectX HCA low-level driver");
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_VERSION(DRV_VERSION);
 
+struct workqueue_struct *mlx4_wq;
+
 #ifdef CONFIG_MLX4_DEBUG
 
 int mlx4_debug_level = 0;
@@ -98,24 +100,23 @@ module_param_named(use_prio, use_prio, bool, 0444);
 MODULE_PARM_DESC(use_prio, "Enable steering by VLAN priority on ETH ports "
 		  "(0/1, default 0)");
 
-static int mlx4_check_port_params(struct mlx4_dev *dev,
-				  enum mlx4_port_type *port_type)
+int mlx4_check_port_params(struct mlx4_dev *dev,
+			   enum mlx4_port_type *port_type)
 {
 	int i;
 
 	for (i = 0; i < dev->caps.num_ports - 1; i++) {
-		if (port_type[i] != port_type[i+1] &&
-		    !(dev->caps.flags & MLX4_DEV_CAP_FLAG_DPDP)) {
-			mlx4_err(dev, "Only same port types supported "
-				 "on this HCA, aborting.\n");
-			return -EINVAL;
+		if (port_type[i] != port_type[i + 1]) {
+			if (!(dev->caps.flags & MLX4_DEV_CAP_FLAG_DPDP)) {
+				mlx4_err(dev, "Only same port types supported "
+					 "on this HCA, aborting.\n");
+				return -EINVAL;
+			}
+			if (port_type[i] == MLX4_PORT_TYPE_ETH &&
+			    port_type[i + 1] == MLX4_PORT_TYPE_IB)
+				return -EINVAL;
 		}
 	}
-	if ((port_type[0] == MLX4_PORT_TYPE_ETH) &&
-	    (port_type[1] == MLX4_PORT_TYPE_IB)) {
-		mlx4_err(dev, "eth-ib configuration is not supported.\n");
-		return -EINVAL;
-	}
 
 	for (i = 0; i < dev->caps.num_ports; i++) {
 		if (!(port_type[i] & dev->caps.supported_type[i+1])) {
@@ -225,6 +226,9 @@ static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
 			dev->caps.port_type[i] = MLX4_PORT_TYPE_IB;
 		else
 			dev->caps.port_type[i] = MLX4_PORT_TYPE_ETH;
+		dev->caps.possible_type[i] = dev->caps.port_type[i];
+		mlx4_priv(dev)->sense.sense_allowed[i] =
+			dev->caps.supported_type[i] == MLX4_PORT_TYPE_AUTO;
 
 		if (dev->caps.log_num_macs > dev_cap->log_max_macs[i]) {
 			dev->caps.log_num_macs = dev_cap->log_max_macs[i];
@@ -263,14 +267,16 @@ static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
  * Change the port configuration of the device.
  * Every user of this function must hold the port mutex.
  */
-static int mlx4_change_port_types(struct mlx4_dev *dev,
-				  enum mlx4_port_type *port_types)
+int mlx4_change_port_types(struct mlx4_dev *dev,
+			   enum mlx4_port_type *port_types)
 {
 	int err = 0;
 	int change = 0;
 	int port;
 
 	for (port = 0; port <  dev->caps.num_ports; port++) {
+		/* Change the port type only if the new type is different
+		 * from the current, and not set to Auto */
 		if (port_types[port] != dev->caps.port_type[port + 1]) {
 			change = 1;
 			dev->caps.port_type[port + 1] = port_types[port];
@@ -302,10 +308,17 @@ static ssize_t show_port_type(struct device *dev,
 	struct mlx4_port_info *info = container_of(attr, struct mlx4_port_info,
 						   port_attr);
 	struct mlx4_dev *mdev = info->dev;
+	char type[8];
+
+	sprintf(type, "%s",
+		(mdev->caps.port_type[info->port] == MLX4_PORT_TYPE_IB) ?
+		"ib" : "eth");
+	if (mdev->caps.possible_type[info->port] == MLX4_PORT_TYPE_AUTO)
+		sprintf(buf, "auto (%s)\n", type);
+	else
+		sprintf(buf, "%s\n", type);
 
-	return sprintf(buf, "%s\n",
-		       mdev->caps.port_type[info->port] == MLX4_PORT_TYPE_IB ?
-		       "ib" : "eth");
+	return strlen(buf);
 }
 
 static ssize_t set_port_type(struct device *dev,
@@ -317,6 +330,7 @@ static ssize_t set_port_type(struct device *dev,
 	struct mlx4_dev *mdev = info->dev;
 	struct mlx4_priv *priv = mlx4_priv(mdev);
 	enum mlx4_port_type types[MLX4_MAX_PORTS];
+	enum mlx4_port_type new_types[MLX4_MAX_PORTS];
 	int i;
 	int err = 0;
 
@@ -324,26 +338,56 @@ static ssize_t set_port_type(struct device *dev,
 		info->tmp_type = MLX4_PORT_TYPE_IB;
 	else if (!strcmp(buf, "eth\n"))
 		info->tmp_type = MLX4_PORT_TYPE_ETH;
+	else if (!strcmp(buf, "auto\n"))
+		info->tmp_type = MLX4_PORT_TYPE_AUTO;
 	else {
 		mlx4_err(mdev, "%s is not supported port type\n", buf);
 		return -EINVAL;
 	}
 
+	mlx4_stop_sense(mdev);
 	mutex_lock(&priv->port_mutex);
-	for (i = 0; i < mdev->caps.num_ports; i++)
+	/* Possible type is always the one that was delivered */
+	mdev->caps.possible_type[info->port] = info->tmp_type;
+
+	for (i = 0; i < mdev->caps.num_ports; i++) {
 		types[i] = priv->port[i+1].tmp_type ? priv->port[i+1].tmp_type :
-					mdev->caps.port_type[i+1];
+					mdev->caps.possible_type[i+1];
+		if (types[i] == MLX4_PORT_TYPE_AUTO)
+			types[i] = mdev->caps.port_type[i+1];
+	}
 
-	err = mlx4_check_port_params(mdev, types);
+	if (!(mdev->caps.flags & MLX4_DEV_CAP_FLAG_DPDP)) {
+		for (i = 1; i <= mdev->caps.num_ports; i++) {
+			if (mdev->caps.possible_type[i] == MLX4_PORT_TYPE_AUTO) {
+				mdev->caps.possible_type[i] = mdev->caps.port_type[i];
+				err = -EINVAL;
+			}
+		}
+	}
+	if (err) {
+		mlx4_err(mdev, "Auto sensing is not supported on this HCA. "
+			       "Set only 'eth' or 'ib' for both ports "
+			       "(should be the same)\n");
+		goto out;
+	}
+
+	mlx4_do_sense_ports(mdev, new_types, types);
+
+	err = mlx4_check_port_params(mdev, new_types);
 	if (err)
 		goto out;
 
-	for (i = 1; i <= mdev->caps.num_ports; i++)
-		priv->port[i].tmp_type = 0;
+	/* We are about to apply the changes after the configuration
+	 * was verified, no need to remember the temporary types
+	 * any more */
+	for (i = 0; i < mdev->caps.num_ports; i++)
+		priv->port[i + 1].tmp_type = 0;
 
-	err = mlx4_change_port_types(mdev, types);
+	err = mlx4_change_port_types(mdev, new_types);
 
 out:
+	mlx4_start_sense(mdev);
 	mutex_unlock(&priv->port_mutex);
 	return err ? err : count;
 }
@@ -1117,6 +1161,9 @@ static int __mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (err)
 		goto err_port;
 
+	mlx4_sense_init(dev);
+	mlx4_start_sense(dev);
+
 	pci_set_drvdata(pdev, dev);
 
 	return 0;
@@ -1182,6 +1229,7 @@ static void mlx4_remove_one(struct pci_dev *pdev)
 	int p;
 
 	if (dev) {
+		mlx4_stop_sense(dev);
 		mlx4_unregister_device(dev);
 
 		for (p = 1; p <= dev->caps.num_ports; p++) {
@@ -1266,9 +1314,11 @@ static int __init mlx4_init(void)
 	if (mlx4_verify_params())
 		return -EINVAL;
 
-	ret = mlx4_catas_init();
-	if (ret)
-		return ret;
+	mlx4_catas_init();
+
+	mlx4_wq = create_singlethread_workqueue("mlx4");
+	if (!mlx4_wq)
+		return -ENOMEM;
 
 	ret = pci_register_driver(&mlx4_driver);
 	return ret < 0 ? ret : 0;
@@ -1277,7 +1327,7 @@ static int __init mlx4_init(void)
 static void __exit mlx4_cleanup(void)
 {
 	pci_unregister_driver(&mlx4_driver);
-	mlx4_catas_cleanup();
+	destroy_workqueue(mlx4_wq);
 }
 
 module_init(mlx4_init);

drivers/net/mlx4/mlx4.h

@@ -40,6 +40,7 @@
 #include <linux/mutex.h>
 #include <linux/radix-tree.h>
 #include <linux/timer.h>
+#include <linux/workqueue.h>
 
 #include <linux/mlx4/device.h>
 #include <linux/mlx4/driver.h>
@@ -276,6 +277,13 @@ struct mlx4_port_info {
 	struct mlx4_vlan_table	vlan_table;
 };
 
+struct mlx4_sense {
+	struct mlx4_dev		*dev;
+	u8			do_sense_port[MLX4_MAX_PORTS + 1];
+	u8			sense_allowed[MLX4_MAX_PORTS + 1];
+	struct delayed_work	sense_poll;
+};
+
 struct mlx4_priv {
 	struct mlx4_dev		dev;
 
@@ -305,6 +313,7 @@ struct mlx4_priv {
 	struct mlx4_uar		driver_uar;
 	void __iomem	       *kar;
 	struct mlx4_port_info	port[MLX4_MAX_PORTS + 1];
+	struct mlx4_sense       sense;
 	struct mutex		port_mutex;
 };
 
@@ -313,6 +322,10 @@ static inline struct mlx4_priv *mlx4_priv(struct mlx4_dev *dev)
 	return container_of(dev, struct mlx4_priv, dev);
 }
 
+#define MLX4_SENSE_RANGE	(HZ * 3)
+
+extern struct workqueue_struct *mlx4_wq;
+
 u32 mlx4_bitmap_alloc(struct mlx4_bitmap *bitmap);
 void mlx4_bitmap_free(struct mlx4_bitmap *bitmap, u32 obj);
 u32 mlx4_bitmap_alloc_range(struct mlx4_bitmap *bitmap, int cnt, int align);
@@ -346,8 +359,7 @@ void mlx4_cleanup_mcg_table(struct mlx4_dev *dev);
 
 void mlx4_start_catas_poll(struct mlx4_dev *dev);
 void mlx4_stop_catas_poll(struct mlx4_dev *dev);
-int mlx4_catas_init(void);
-void mlx4_catas_cleanup(void);
+void mlx4_catas_init(void);
 int mlx4_restart_one(struct pci_dev *pdev);
 int mlx4_register_device(struct mlx4_dev *dev);
 void mlx4_unregister_device(struct mlx4_dev *dev);
@@ -379,6 +391,17 @@ void mlx4_srq_event(struct mlx4_dev *dev, u32 srqn, int event_type);
 
 void mlx4_handle_catas_err(struct mlx4_dev *dev);
 
+void mlx4_do_sense_ports(struct mlx4_dev *dev,
+			 enum mlx4_port_type *stype,
+			 enum mlx4_port_type *defaults);
+void mlx4_start_sense(struct mlx4_dev *dev);
+void mlx4_stop_sense(struct mlx4_dev *dev);
+void mlx4_sense_init(struct mlx4_dev *dev);
+int mlx4_check_port_params(struct mlx4_dev *dev,
+			   enum mlx4_port_type *port_type);
+int mlx4_change_port_types(struct mlx4_dev *dev,
+			   enum mlx4_port_type *port_types);
+
 void mlx4_init_mac_table(struct mlx4_dev *dev, struct mlx4_mac_table *table);
 void mlx4_init_vlan_table(struct mlx4_dev *dev, struct mlx4_vlan_table *table);
 

drivers/net/mlx4/sense.c

+/*
+ * Copyright (c) 2007 Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/if_ether.h>
+
+#include <linux/mlx4/cmd.h>
+
+#include "mlx4.h"
+
+static int mlx4_SENSE_PORT(struct mlx4_dev *dev, int port,
+			   enum mlx4_port_type *type)
+{
+	u64 out_param;
+	int err = 0;
+
+	err = mlx4_cmd_imm(dev, 0, &out_param, port, 0,
+			   MLX4_CMD_SENSE_PORT, MLX4_CMD_TIME_CLASS_B);
+	if (err) {
+		mlx4_err(dev, "Sense command failed for port: %d\n", port);
+		return err;
+	}
+
+	if (out_param > 2) {
+		mlx4_err(dev, "Sense returned illegal value: 0x%llx\n", out_param);
+		return EINVAL;
+	}
+
+	*type = out_param;
+	return 0;
+}
+
+void mlx4_do_sense_ports(struct mlx4_dev *dev,
+			 enum mlx4_port_type *stype,
+			 enum mlx4_port_type *defaults)
+{
+	struct mlx4_sense *sense = &mlx4_priv(dev)->sense;
+	int err;
+	int i;
+
+	for (i = 1; i <= dev->caps.num_ports; i++) {
+		stype[i - 1] = 0;
+		if (sense->do_sense_port[i] && sense->sense_allowed[i] &&
+		    dev->caps.possible_type[i] == MLX4_PORT_TYPE_AUTO) {
+			err = mlx4_SENSE_PORT(dev, i, &stype[i - 1]);
+			if (err)
+				stype[i - 1] = defaults[i - 1];
+		} else
+			stype[i - 1] = defaults[i - 1];
+	}
+
+	/*
+	 * Adjust port configuration:
+	 * If port 1 sensed nothing and port 2 is IB, set both as IB
+	 * If port 2 sensed nothing and port 1 is Eth, set both as Eth
+	 */
+	if (stype[0] == MLX4_PORT_TYPE_ETH) {
+		for (i = 1; i < dev->caps.num_ports; i++)
+			stype[i] = stype[i] ? stype[i] : MLX4_PORT_TYPE_ETH;
+	}
+	if (stype[dev->caps.num_ports - 1] == MLX4_PORT_TYPE_IB) {
+		for (i = 0; i < dev->caps.num_ports - 1; i++)
+			stype[i] = stype[i] ? stype[i] : MLX4_PORT_TYPE_IB;
+	}
+
+	/*
+	 * If sensed nothing, remain in current configuration.
+	 */
+	for (i = 0; i < dev->caps.num_ports; i++)
+		stype[i] = stype[i] ? stype[i] : defaults[i];
+
+}
+
+static void mlx4_sense_port(struct work_struct *work)
+{
+	struct delayed_work *delay = container_of(work, struct delayed_work, work);
+	struct mlx4_sense *sense = container_of(delay, struct mlx4_sense,
+						sense_poll);
+	struct mlx4_dev *dev = sense->dev;
+	struct mlx4_priv *priv = mlx4_priv(dev);
+	enum mlx4_port_type stype[MLX4_MAX_PORTS];
+
+	mutex_lock(&priv->port_mutex);
+	mlx4_do_sense_ports(dev, stype, &dev->caps.port_type[1]);
+
+	if (mlx4_check_port_params(dev, stype))
+		goto sense_again;
+
+	if (mlx4_change_port_types(dev, stype))
+		mlx4_err(dev, "Failed to change port_types\n");
+
+sense_again:
+	mutex_unlock(&priv->port_mutex);
+	queue_delayed_work(mlx4_wq , &sense->sense_poll,
+			   round_jiffies_relative(MLX4_SENSE_RANGE));
+}
+
+void mlx4_start_sense(struct mlx4_dev *dev)
+{
+	struct mlx4_priv *priv = mlx4_priv(dev);
+	struct mlx4_sense *sense = &priv->sense;
+
+	if (!(dev->caps.flags & MLX4_DEV_CAP_FLAG_DPDP))
+		return;
+
+	queue_delayed_work(mlx4_wq , &sense->sense_poll,
+			   round_jiffies_relative(MLX4_SENSE_RANGE));
+}
+
+void mlx4_stop_sense(struct mlx4_dev *dev)
+{
+	cancel_delayed_work_sync(&mlx4_priv(dev)->sense.sense_poll);
+}
+
+void  mlx4_sense_init(struct mlx4_dev *dev)
+{
+	struct mlx4_priv *priv = mlx4_priv(dev);
+	struct mlx4_sense *sense = &priv->sense;
+	int port;
+
+	sense->dev = dev;
+	for (port = 1; port <= dev->caps.num_ports; port++)
+		sense->do_sense_port[port] = 1;
+
+	INIT_DELAYED_WORK_DEFERRABLE(&sense->sense_poll, mlx4_sense_port);
+}

include/linux/mlx4/cmd.h

@@ -55,6 +55,7 @@ enum {
 	MLX4_CMD_CLOSE_PORT	 = 0xa,
 	MLX4_CMD_QUERY_HCA	 = 0xb,
 	MLX4_CMD_QUERY_PORT	 = 0x43,
+	MLX4_CMD_SENSE_PORT	 = 0x4d,
 	MLX4_CMD_SET_PORT	 = 0xc,
 	MLX4_CMD_ACCESS_DDR	 = 0x2e,
 	MLX4_CMD_MAP_ICM	 = 0xffa,

include/linux/mlx4/device.h

@@ -155,8 +155,9 @@ enum mlx4_qp_region {
 };
 
 enum mlx4_port_type {
-	MLX4_PORT_TYPE_IB	= 1 << 0,
-	MLX4_PORT_TYPE_ETH	= 1 << 1,
+	MLX4_PORT_TYPE_IB	= 1,
+	MLX4_PORT_TYPE_ETH	= 2,
+	MLX4_PORT_TYPE_AUTO	= 3
 };
 
 enum mlx4_special_vlan_idx {
@@ -237,6 +238,7 @@ struct mlx4_caps {
 	enum mlx4_port_type	port_type[MLX4_MAX_PORTS + 1];
 	u8			supported_type[MLX4_MAX_PORTS + 1];
 	u32			port_mask;
+	enum mlx4_port_type	possible_type[MLX4_MAX_PORTS + 1];
 };
 
 struct mlx4_buf_list {