Commit 27d68a36 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'nommu' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'nommu' of master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] nommu: backtrace code must not reference a discarded section
  [ARM] nommu: Initial uCLinux support for MMU-based CPUs
  [ARM] nommu: prevent Xscale-based machines being selected
  [ARM] nommu: export flush_dcache_page()
  [ARM] nommu: remove fault-armv, mmap and mm-armv files from nommu build
  [ARM] Remove TABLE_SIZE, and several unused function prototypes
  [ARM] nommu: Provide a simple flush_dcache_page implementation
  [ARM] nommu: add arch/arm/Kconfig-nommu to Kconfig files
  [ARM] nommu: add stubs for ioremap and friends
  [ARM] nommu: avoid selecting TLB and CPU specific copy code
  [ARM] nommu: uaccess tweaks
  [ARM] nommu: adjust headers for !MMU ARM systems
  [ARM] nommu: we need the TLS register emulation for nommu mode
parents 76a22271 583e7f5d
......@@ -188,23 +188,27 @@ config ARCH_IMX
config ARCH_IOP3XX
bool "IOP3xx-based"
depends on MMU
select PCI
help
Support for Intel's IOP3XX (XScale) family of processors.
config ARCH_IXP4XX
bool "IXP4xx-based"
depends on MMU
help
Support for Intel's IXP4XX (XScale) family of processors.
config ARCH_IXP2000
bool "IXP2400/2800-based"
depends on MMU
select PCI
help
Support for Intel's IXP2400/2800 (XScale) family of processors.
config ARCH_IXP23XX
bool "IXP23XX-based"
depends on MMU
select PCI
help
Support for Intel's IXP23xx (XScale) family of processors.
......@@ -229,6 +233,7 @@ config ARCH_PNX4008
config ARCH_PXA
bool "PXA2xx-based"
depends on MMU
select ARCH_MTD_XIP
help
Support for Intel's PXA2XX processor line.
......@@ -339,6 +344,10 @@ config XSCALE_PMU
depends on CPU_XSCALE && !XSCALE_PMU_TIMER
default y
if !MMU
source "arch/arm/Kconfig-nommu"
endif
endmenu
source "arch/arm/common/Kconfig"
......
......@@ -109,11 +109,13 @@ EXPORT_SYMBOL(memchr);
EXPORT_SYMBOL(__memzero);
/* user mem (segment) */
EXPORT_SYMBOL(__strnlen_user);
EXPORT_SYMBOL(__strncpy_from_user);
#ifdef CONFIG_MMU
EXPORT_SYMBOL(__copy_from_user);
EXPORT_SYMBOL(__copy_to_user);
EXPORT_SYMBOL(__clear_user);
EXPORT_SYMBOL(__strnlen_user);
EXPORT_SYMBOL(__strncpy_from_user);
EXPORT_SYMBOL(__get_user_1);
EXPORT_SYMBOL(__get_user_2);
......@@ -123,6 +125,7 @@ EXPORT_SYMBOL(__put_user_1);
EXPORT_SYMBOL(__put_user_2);
EXPORT_SYMBOL(__put_user_4);
EXPORT_SYMBOL(__put_user_8);
#endif
/* crypto hash */
EXPORT_SYMBOL(sha_transform);
......
......@@ -80,6 +80,10 @@ SECTIONS
*(.exit.text)
*(.exit.data)
*(.exitcall.exit)
#ifndef CONFIG_MMU
*(.fixup)
*(__ex_table)
#endif
}
.text : { /* Real text segment */
......@@ -87,7 +91,9 @@ SECTIONS
*(.text)
SCHED_TEXT
LOCK_TEXT
#ifdef CONFIG_MMU
*(.fixup)
#endif
*(.gnu.warning)
*(.rodata)
*(.rodata.*)
......@@ -142,7 +148,9 @@ SECTIONS
*/
. = ALIGN(32);
__start___ex_table = .;
#ifdef CONFIG_MMU
*(__ex_table)
#endif
__stop___ex_table = .;
/*
......
......@@ -6,28 +6,31 @@
lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \
csumpartialcopy.o csumpartialcopyuser.o clearbit.o \
copy_page.o delay.o findbit.o memchr.o memcpy.o \
delay.o findbit.o memchr.o memcpy.o \
memmove.o memset.o memzero.o setbit.o \
strncpy_from_user.o strnlen_user.o \
strchr.o strrchr.o \
testchangebit.o testclearbit.o testsetbit.o \
getuser.o putuser.o clear_user.o \
ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
ucmpdi2.o lib1funcs.o div64.o sha1.o \
io-readsb.o io-writesb.o io-readsl.o io-writesl.o
mmu-y := clear_user.o copy_page.o getuser.o putuser.o
# the code in uaccess.S is not preemption safe and
# probably faster on ARMv3 only
ifeq ($(CONFIG_PREEMPT),y)
lib-y += copy_from_user.o copy_to_user.o
mmu-y += copy_from_user.o copy_to_user.o
else
ifneq ($(CONFIG_CPU_32v3),y)
lib-y += copy_from_user.o copy_to_user.o
mmu-y += copy_from_user.o copy_to_user.o
else
lib-y += uaccess.o
mmu-y += uaccess.o
endif
endif
lib-$(CONFIG_MMU) += $(mmu-y)
ifeq ($(CONFIG_CPU_32v3),y)
lib-y += io-readsw-armv3.o io-writesw-armv3.o
else
......
......@@ -97,16 +97,13 @@ ENTRY(c_backtrace)
b 1007f
/*
* Fixup for LDMDB
* Fixup for LDMDB. Note that this must not be in the fixup section.
*/
.section .fixup,"ax"
.align 0
1007: ldr r0, =.Lbad
mov r1, frame
bl printk
ldmfd sp!, {r4 - r8, pc}
.ltorg
.previous
.section __ex_table,"a"
.align 3
......
......@@ -15,8 +15,8 @@ config CPU_ARM610
select CPU_32v3
select CPU_CACHE_V3
select CPU_CACHE_VIVT
select CPU_COPY_V3
select CPU_TLB_V3
select CPU_COPY_V3 if MMU
select CPU_TLB_V3 if MMU
help
The ARM610 is the successor to the ARM3 processor
and was produced by VLSI Technology Inc.
......@@ -31,8 +31,8 @@ config CPU_ARM710
select CPU_32v3
select CPU_CACHE_V3
select CPU_CACHE_VIVT
select CPU_COPY_V3
select CPU_TLB_V3
select CPU_COPY_V3 if MMU
select CPU_TLB_V3 if MMU
help
A 32-bit RISC microprocessor based on the ARM7 processor core
designed by Advanced RISC Machines Ltd. The ARM710 is the
......@@ -50,8 +50,8 @@ config CPU_ARM720T
select CPU_ABRT_LV4T
select CPU_CACHE_V4
select CPU_CACHE_VIVT
select CPU_COPY_V4WT
select CPU_TLB_V4WT
select CPU_COPY_V4WT if MMU
select CPU_TLB_V4WT if MMU
help
A 32-bit RISC processor with 8kByte Cache, Write Buffer and
MMU built around an ARM7TDMI core.
......@@ -68,8 +68,8 @@ config CPU_ARM920T
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_COPY_V4WB
select CPU_TLB_V4WBI
select CPU_COPY_V4WB if MMU
select CPU_TLB_V4WBI if MMU
help
The ARM920T is licensed to be produced by numerous vendors,
and is used in the Maverick EP9312 and the Samsung S3C2410.
......@@ -89,8 +89,8 @@ config CPU_ARM922T
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_COPY_V4WB
select CPU_TLB_V4WBI
select CPU_COPY_V4WB if MMU
select CPU_TLB_V4WBI if MMU
help
The ARM922T is a version of the ARM920T, but with smaller
instruction and data caches. It is used in Altera's
......@@ -108,8 +108,8 @@ config CPU_ARM925T
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_COPY_V4WB
select CPU_TLB_V4WBI
select CPU_COPY_V4WB if MMU
select CPU_TLB_V4WBI if MMU
help
The ARM925T is a mix between the ARM920T and ARM926T, but with
different instruction and data caches. It is used in TI's OMAP
......@@ -126,8 +126,8 @@ config CPU_ARM926T
select CPU_32v5
select CPU_ABRT_EV5TJ
select CPU_CACHE_VIVT
select CPU_COPY_V4WB
select CPU_TLB_V4WBI
select CPU_COPY_V4WB if MMU
select CPU_TLB_V4WBI if MMU
help
This is a variant of the ARM920. It has slightly different
instruction sequences for cache and TLB operations. Curiously,
......@@ -144,8 +144,8 @@ config CPU_ARM1020
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_COPY_V4WB
select CPU_TLB_V4WBI
select CPU_COPY_V4WB if MMU
select CPU_TLB_V4WBI if MMU
help
The ARM1020 is the 32K cached version of the ARM10 processor,
with an addition of a floating-point unit.
......@@ -161,8 +161,8 @@ config CPU_ARM1020E
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_COPY_V4WB
select CPU_TLB_V4WBI
select CPU_COPY_V4WB if MMU
select CPU_TLB_V4WBI if MMU
depends on n
# ARM1022E
......@@ -172,8 +172,8 @@ config CPU_ARM1022
select CPU_32v5
select CPU_ABRT_EV4T
select CPU_CACHE_VIVT
select CPU_COPY_V4WB # can probably do better
select CPU_TLB_V4WBI
select CPU_COPY_V4WB if MMU # can probably do better
select CPU_TLB_V4WBI if MMU
help
The ARM1022E is an implementation of the ARMv5TE architecture
based upon the ARM10 integer core with a 16KiB L1 Harvard cache,
......@@ -189,8 +189,8 @@ config CPU_ARM1026
select CPU_32v5
select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
select CPU_CACHE_VIVT
select CPU_COPY_V4WB # can probably do better
select CPU_TLB_V4WBI
select CPU_COPY_V4WB if MMU # can probably do better
select CPU_TLB_V4WBI if MMU
help
The ARM1026EJ-S is an implementation of the ARMv5TEJ architecture
based upon the ARM10 integer core.
......@@ -207,8 +207,8 @@ config CPU_SA110
select CPU_ABRT_EV4
select CPU_CACHE_V4WB
select CPU_CACHE_VIVT
select CPU_COPY_V4WB
select CPU_TLB_V4WB
select CPU_COPY_V4WB if MMU
select CPU_TLB_V4WB if MMU
help
The Intel StrongARM(R) SA-110 is a 32-bit microprocessor and
is available at five speeds ranging from 100 MHz to 233 MHz.
......@@ -227,7 +227,7 @@ config CPU_SA1100
select CPU_ABRT_EV4
select CPU_CACHE_V4WB
select CPU_CACHE_VIVT
select CPU_TLB_V4WB
select CPU_TLB_V4WB if MMU
# XScale
config CPU_XSCALE
......@@ -237,7 +237,7 @@ config CPU_XSCALE
select CPU_32v5
select CPU_ABRT_EV5T
select CPU_CACHE_VIVT
select CPU_TLB_V4WBI
select CPU_TLB_V4WBI if MMU
# XScale Core Version 3
config CPU_XSC3
......@@ -247,7 +247,7 @@ config CPU_XSC3
select CPU_32v5
select CPU_ABRT_EV5T
select CPU_CACHE_VIVT
select CPU_TLB_V4WBI
select CPU_TLB_V4WBI if MMU
select IO_36
# ARMv6
......@@ -258,8 +258,8 @@ config CPU_V6
select CPU_ABRT_EV6
select CPU_CACHE_V6
select CPU_CACHE_VIPT
select CPU_COPY_V6
select CPU_TLB_V6
select CPU_COPY_V6 if MMU
select CPU_TLB_V6 if MMU
# ARMv6k
config CPU_32v6K
......@@ -277,17 +277,17 @@ config CPU_32v6K
# This defines the compiler instruction set which depends on the machine type.
config CPU_32v3
bool
select TLS_REG_EMUL if SMP
select TLS_REG_EMUL if SMP || !MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
config CPU_32v4
bool
select TLS_REG_EMUL if SMP
select TLS_REG_EMUL if SMP || !MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
config CPU_32v5
bool
select TLS_REG_EMUL if SMP
select TLS_REG_EMUL if SMP || !MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
config CPU_32v6
......@@ -334,6 +334,7 @@ config CPU_CACHE_VIVT
config CPU_CACHE_VIPT
bool
if MMU
# The copy-page model
config CPU_COPY_V3
bool
......@@ -372,6 +373,8 @@ config CPU_TLB_V4WBI
config CPU_TLB_V6
bool
endif
#
# CPU supports 36-bit I/O
#
......
......@@ -2,10 +2,16 @@
# Makefile for the linux arm-specific parts of the memory manager.
#
obj-y := consistent.o extable.o fault-armv.o \
fault.o flush.o init.o ioremap.o mmap.o \
obj-y := consistent.o extable.o fault.o init.o \
iomap.o
obj-$(CONFIG_MMU) += fault-armv.o flush.o ioremap.o mmap.o \
mm-armv.o
ifneq ($(CONFIG_MMU),y)
obj-y += nommu.o
endif
obj-$(CONFIG_MODULES) += proc-syms.o
obj-$(CONFIG_ALIGNMENT_TRAP) += alignment.o
......
......@@ -26,8 +26,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#define TABLE_SIZE (2 * PTRS_PER_PTE * sizeof(pte_t))
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
......
/*
* linux/arch/arm/mm/iomap.c
*
* Map IO port and PCI memory spaces so that {read,write}[bwl] can
* be used to access this memory.
*/
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <asm/io.h>
#ifdef __io
void __iomem *ioport_map(unsigned long port, unsigned int nr)
{
return __io(port);
}
EXPORT_SYMBOL(ioport_map);
void ioport_unmap(void __iomem *addr)
{
}
EXPORT_SYMBOL(ioport_unmap);
#endif
#ifdef CONFIG_PCI
void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
{
unsigned long start = pci_resource_start(dev, bar);
unsigned long len = pci_resource_len(dev, bar);
unsigned long flags = pci_resource_flags(dev, bar);
if (!len || !start)
return NULL;
if (maxlen && len > maxlen)
len = maxlen;
if (flags & IORESOURCE_IO)
return ioport_map(start, len);
if (flags & IORESOURCE_MEM) {
if (flags & IORESOURCE_CACHEABLE)
return ioremap(start, len);
return ioremap_nocache(start, len);
}
return NULL;
}
EXPORT_SYMBOL(pci_iomap);
void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
{
if ((unsigned long)addr >= VMALLOC_START &&
(unsigned long)addr < VMALLOC_END)
iounmap(addr);
}
EXPORT_SYMBOL(pci_iounmap);
#endif
......@@ -176,50 +176,3 @@ void __iounmap(void __iomem *addr)
vunmap((void *)(PAGE_MASK & (unsigned long)addr));
}
EXPORT_SYMBOL(__iounmap);
#ifdef __io
void __iomem *ioport_map(unsigned long port, unsigned int nr)
{
return __io(port);
}
EXPORT_SYMBOL(ioport_map);
void ioport_unmap(void __iomem *addr)
{
}
EXPORT_SYMBOL(ioport_unmap);
#endif
#ifdef CONFIG_PCI
#include <linux/pci.h>
#include <linux/ioport.h>
void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
{
unsigned long start = pci_resource_start(dev, bar);
unsigned long len = pci_resource_len(dev, bar);
unsigned long flags = pci_resource_flags(dev, bar);
if (!len || !start)
return NULL;
if (maxlen && len > maxlen)
len = maxlen;
if (flags & IORESOURCE_IO)
return ioport_map(start, len);
if (flags & IORESOURCE_MEM) {
if (flags & IORESOURCE_CACHEABLE)
return ioremap(start, len);
return ioremap_nocache(start, len);
}
return NULL;
}
EXPORT_SYMBOL(pci_iomap);
void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
{
if ((unsigned long)addr >= VMALLOC_START &&
(unsigned long)addr < VMALLOC_END)
iounmap(addr);
}
EXPORT_SYMBOL(pci_iounmap);
#endif
/*
* linux/arch/arm/mm/nommu.c
*
* ARM uCLinux supporting functions.
*/
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/pagemap.h>
#include <asm/cacheflush.h>
#include <asm/io.h>
#include <asm/page.h>
void flush_dcache_page(struct page *page)
{
__cpuc_flush_dcache_page(page_address(page));
}
EXPORT_SYMBOL(flush_dcache_page);
void __iomem *__ioremap_pfn(unsigned long pfn, unsigned long offset,
size_t size, unsigned long flags)
{
if (pfn >= (0x100000000ULL >> PAGE_SHIFT))
return NULL;
return (void __iomem *) (offset + (pfn << PAGE_SHIFT));
}
EXPORT_SYMBOL(__ioremap_pfn);
void __iomem *__ioremap(unsigned long phys_addr, size_t size,
unsigned long flags)
{
return (void __iomem *)phys_addr;
}
EXPORT_SYMBOL(__ioremap);
void __iounmap(void __iomem *addr)
{
}
EXPORT_SYMBOL(__iounmap);
......@@ -3,6 +3,7 @@
*
* Copyright (C) 2000 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd.
* hacked for non-paged-MM by Hyok S. Choi, 2003.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -101,7 +102,9 @@ ENTRY(cpu_arm1020_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
#endif
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x000f @ ............wcam
bic ip, ip, #0x1100 @ ...i...s........
......@@ -359,6 +362,7 @@ ENTRY(cpu_arm1020_dcache_clean_area)
*/
.align 5
ENTRY(cpu_arm1020_switch_mm)
#ifdef CONFIG_MMU
#ifndef CONFIG_CPU_DCACHE_DISABLE
mcr p15, 0, r3, c7, c10, 4
mov r1, #0xF @ 16 segments
......@@ -383,6 +387,7 @@ ENTRY(cpu_arm1020_switch_mm)
mcr p15, 0, r1, c7, c10, 4 @ drain WB
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
#endif /* CONFIG_MMU */
mov pc, lr
/*
......@@ -392,6 +397,7 @@ ENTRY(cpu_arm1020_switch_mm)
*/
.align 5
ENTRY(cpu_arm1020_set_pte)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
......@@ -421,6 +427,7 @@ ENTRY(cpu_arm1020_set_pte)
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
#endif
mcr p15, 0, r0, c7, c10, 4 @ drain WB
#endif /* CONFIG_MMU */
mov pc, lr
__INIT
......@@ -430,7 +437,9 @@ __arm1020_setup:
mov r0, #0
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
#endif
mrc p15, 0, r0, c1, c0 @ get control register v4
ldr r5, arm1020_cr1_clear
bic r0, r0, r5
......
......@@ -3,6 +3,7 @@
*
* Copyright (C) 2000 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd.
* hacked for non-paged-MM by Hyok S. Choi, 2003.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -101,7 +102,9 @@ ENTRY(cpu_arm1020e_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
#endif
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x000f @ ............wcam
bic ip, ip, #0x1100 @ ...i...s........
......@@ -344,6 +347,7 @@ ENTRY(cpu_arm1020e_dcache_clean_area)
*/
.align 5
ENTRY(cpu_arm1020e_switch_mm)
#ifdef CONFIG_MMU
#ifndef CONFIG_CPU_DCACHE_DISABLE
mcr p15, 0, r3, c7, c10, 4
mov r1, #0xF @ 16 segments
......@@ -367,6 +371,7 @@ ENTRY(cpu_arm1020e_switch_mm)
mcr p15, 0, r1, c7, c10, 4 @ drain WB
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
#endif
mov pc, lr
/*
......@@ -376,6 +381,7 @@ ENTRY(cpu_arm1020e_switch_mm)
*/
.align 5
ENTRY(cpu_arm1020e_set_pte)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
......@@ -403,6 +409,7 @@ ENTRY(cpu_arm1020e_set_pte)
#ifndef CONFIG_CPU_DCACHE_DISABLE
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
#endif
#endif /* CONFIG_MMU */
mov pc, lr
__INIT
......@@ -412,7 +419,9 @@ __arm1020e_setup:
mov r0, #0
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
#endif
mrc p15, 0, r0, c1, c0 @ get control register v4
ldr r5, arm1020e_cr1_clear
bic r0, r0, r5
......
......@@ -3,6 +3,7 @@
*
* Copyright (C) 2000 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd.
* hacked for non-paged-MM by Hyok S. Choi, 2003.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -90,7 +91,9 @@ ENTRY(cpu_arm1022_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
#endif
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x000f @ ............wcam
bic ip, ip, #0x1100 @ ...i...s........
......@@ -333,6 +336,7 @@ ENTRY(cpu_arm1022_dcache_clean_area)
*/
.align 5
ENTRY(cpu_arm1022_switch_mm)
#ifdef CONFIG_MMU
#ifndef CONFIG_CPU_DCACHE_DISABLE
mov r1, #(CACHE_DSEGMENTS - 1) << 5 @ 16 segments
1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
......@@ -349,6 +353,7 @@ ENTRY(cpu_arm1022_switch_mm)
mcr p15, 0, r1, c7, c10, 4 @ drain WB
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
#endif
mov pc, lr
/*
......@@ -358,6 +363,7 @@ ENTRY(cpu_arm1022_switch_mm)
*/
.align 5
ENTRY(cpu_arm1022_set_pte)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
......@@ -385,6 +391,7 @@ ENTRY(cpu_arm1022_set_pte)
#ifndef CONFIG_CPU_DCACHE_DISABLE
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
#endif
#endif /* CONFIG_MMU */
mov pc, lr
__INIT
......@@ -394,7 +401,9 @@ __arm1022_setup:
mov r0, #0
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
#endif
mrc p15, 0, r0, c1, c0 @ get control register v4
ldr r5, arm1022_cr1_clear
bic r0, r0, r5
......
......@@ -3,6 +3,7 @@
*
* Copyright (C) 2000 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd.
* hacked for non-paged-MM by Hyok S. Choi, 2003.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -90,7 +91,9 @@ ENTRY(cpu_arm1026_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
#endif
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x000f @ ............wcam
bic ip, ip, #0x1100 @ ...i...s........
......@@ -327,6 +330,7 @@ ENTRY(cpu_arm1026_dcache_clean_area)
*/
.align 5
ENTRY(cpu_arm1026_switch_mm)
#ifdef CONFIG_MMU
mov r1, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
1: mrc p15, 0, r15, c7, c14, 3 @ test, clean, invalidate
......@@ -338,6 +342,7 @@ ENTRY(cpu_arm1026_switch_mm)
mcr p15, 0, r1, c7, c10, 4 @ drain WB
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
#endif
mov pc, lr
/*
......@@ -347,6 +352,7 @@ ENTRY(cpu_arm1026_switch_mm)
*/
.align 5
ENTRY(cpu_arm1026_set_pte)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
......@@ -374,6 +380,7 @@ ENTRY(cpu_arm1026_set_pte)
#ifndef CONFIG_CPU_DCACHE_DISABLE
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
#endif
#endif /* CONFIG_MMU */
mov pc, lr
......@@ -384,8 +391,10 @@ __arm1026_setup:
mov r0, #0
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
mcr p15, 0, r4, c2, c0 @ load page table pointer
#endif
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
mov r0, #4 @ explicitly disable writeback
mcr p15, 7, r0, c15, c0, 0
......
......@@ -2,6 +2,7 @@
* linux/arch/arm/mm/proc-arm6,7.S
*
* Copyright (C) 1997-2000 Russell King
* hacked for non-paged-MM by Hyok S. Choi, 2003.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -199,10 +200,12 @@ ENTRY(cpu_arm7_do_idle)
*/
ENTRY(cpu_arm6_switch_mm)
ENTRY(cpu_arm7_switch_mm)
#ifdef CONFIG_MMU
mov r1, #0
mcr p15, 0, r1, c7, c0, 0 @ flush cache
mcr p15, 0, r0, c2, c0, 0 @ update page table ptr
mcr p15, 0, r1, c5, c0, 0 @ flush TLBs
#endif
mov pc, lr
/*
......@@ -214,6 +217,7 @@ ENTRY(cpu_arm7_switch_mm)
.align 5
ENTRY(cpu_arm6_set_pte)
ENTRY(cpu_arm7_set_pte)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
......@@ -232,6 +236,7 @@ ENTRY(cpu_arm7_set_pte)
movne r2, #0
str r2, [r0] @ hardware version
#endif /* CONFIG_MMU */
mov pc, lr
/*
......@@ -243,7 +248,9 @@ ENTRY(cpu_arm6_reset)
ENTRY(cpu_arm7_reset)
mov r1, #0
mcr p15, 0, r1, c7, c0, 0 @ flush cache
#ifdef CONFIG_MMU
mcr p15, 0, r1, c5, c0, 0 @ flush TLB
#endif
mov r1, #0x30
mcr p15, 0, r1, c1, c0, 0 @ turn off MMU etc
mov pc, r0
......@@ -253,19 +260,27 @@ ENTRY(cpu_arm7_reset)
.type __arm6_setup, #function
__arm6_setup: mov r0, #0
mcr p15, 0, r0, c7, c0 @ flush caches on v3
#ifdef CONFIG_MMU
mcr p15, 0, r0, c5, c0 @ flush TLBs on v3
mov r0, #0x3d @ . ..RS BLDP WCAM
orr r0, r0, #0x100 @ . ..01 0011 1101
#else
mov r0, #0x3c @ . ..RS BLDP WCA.
#endif
mov pc, lr
.size __arm6_setup, . - __arm6_setup
.type __arm7_setup, #function
__arm7_setup: mov r0, #0
mcr p15, 0, r0, c7, c0 @ flush caches on v3
#ifdef CONFIG_MMU
mcr p15, 0, r0, c5, c0 @ flush TLBs on v3
mcr p15, 0, r0, c3, c0 @ load domain access register
mov r0, #0x7d @ . ..RS BLDP WCAM
orr r0, r0, #0x100 @ . ..01 0111 1101
#else
mov r0, #0x7c @ . ..RS BLDP WCA.
#endif
mov pc, lr
.size __arm7_setup, . - __arm7_setup
......
......@@ -4,6 +4,7 @@
* Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
* Rob Scott (rscott@mtrob.fdns.net)
* Copyright (C) 2000 ARM Limited, Deep Blue Solutions Ltd.
* hacked for non-paged-MM by Hyok S. Choi, 2004.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -29,6 +30,7 @@
* out of 'proc-arm6,7.S' per RMK discussion
* 07-25-2000 SJH Added idle function.
* 08-25-2000 DBS Updated for integration of ARM Ltd version.
* 04-20-2004 HSC modified for non-paged memory management mode.
*/
#include <linux/linkage.h>
#include <linux/init.h>
......@@ -75,10 +77,12 @@ ENTRY(cpu_arm720_do_idle)
* the new.
*/
ENTRY(cpu_arm720_switch_mm)
#ifdef CONFIG_MMU
mov r1, #0
mcr p15, 0, r1, c7, c7, 0 @ invalidate cache
mcr p15, 0, r0, c2, c0, 0 @ update page table ptr
mcr p15, 0, r1, c8, c7, 0 @ flush TLB (v4)
#endif
mov pc, lr
/*
......@@ -89,6 +93,7 @@ ENTRY(cpu_arm720_switch_mm)
*/
.align 5
ENTRY(cpu_arm720_set_pte)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
......@@ -107,6 +112,7 @@ ENTRY(cpu_arm720_set_pte)
movne r2, #0
str r2, [r0] @ hardware version
#endif
mov pc, lr
/*
......@@ -117,7 +123,9 @@ ENTRY(cpu_arm720_set_pte)
ENTRY(cpu_arm720_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate cache
#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ flush TLB (v4)
#endif
mrc p15, 0, ip, c1, c0, 0 @ get ctrl register
bic ip, ip, #0x000f @ ............wcam
bic ip, ip, #0x2100 @ ..v....s........
......@@ -130,7 +138,9 @@ ENTRY(cpu_arm720_reset)
__arm710_setup:
mov r0, #0
mcr p15, 0, r0, c7, c7, 0 @ invalidate caches
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7, 0 @ flush TLB (v4)
#endif
mrc p15, 0, r0, c1, c0 @ get control register
ldr r5, arm710_cr1_clear
bic r0, r0, r5
......@@ -156,7 +166,9 @@ arm710_cr1_set:
__arm720_setup:
mov r0, #0
mcr p15, 0, r0, c7, c7, 0 @ invalidate caches
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7, 0 @ flush TLB (v4)
#endif
mrc p15, 0, r0, c1, c0 @ get control register
ldr r5, arm720_cr1_clear
bic r0, r0, r5
......
......@@ -3,6 +3,7 @@
*
* Copyright (C) 1999,2000 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd.
* hacked for non-paged-MM by Hyok S. Choi, 2003.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -97,7 +98,9 @@ ENTRY(cpu_arm920_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
#endif
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x000f @ ............wcam
bic ip, ip, #0x1100 @ ...i...s........
......@@ -317,6 +320,7 @@ ENTRY(cpu_arm920_dcache_clean_area)
*/
.align 5
ENTRY(cpu_arm920_switch_mm)
#ifdef CONFIG_MMU
mov ip, #0
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
......@@ -337,6 +341,7 @@ ENTRY(cpu_arm920_switch_mm)
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
#endif
mov pc, lr
/*
......@@ -346,6 +351,7 @@ ENTRY(cpu_arm920_switch_mm)
*/
.align 5
ENTRY(cpu_arm920_set_pte)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
......@@ -372,6 +378,7 @@ ENTRY(cpu_arm920_set_pte)
mov r0, r0
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mcr p15, 0, r0, c7, c10, 4 @ drain WB
#endif /* CONFIG_MMU */
mov pc, lr
__INIT
......@@ -381,7 +388,9 @@ __arm920_setup:
mov r0, #0
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
#endif
mrc p15, 0, r0, c1, c0 @ get control register v4
ldr r5, arm920_cr1_clear
bic r0, r0, r5
......
......@@ -4,6 +4,7 @@
* Copyright (C) 1999,2000 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd.
* Copyright (C) 2001 Altera Corporation
* hacked for non-paged-MM by Hyok S. Choi, 2003.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -99,7 +100,9 @@ ENTRY(cpu_arm922_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
#endif
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x000f @ ............wcam
bic ip, ip, #0x1100 @ ...i...s........
......@@ -321,6 +324,7 @@ ENTRY(cpu_arm922_dcache_clean_area)
*/
.align 5
ENTRY(cpu_arm922_switch_mm)
#ifdef CONFIG_MMU
mov ip, #0
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
......@@ -341,6 +345,7 @@ ENTRY(cpu_arm922_switch_mm)
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
#endif
mov pc, lr
/*
......@@ -350,6 +355,7 @@ ENTRY(cpu_arm922_switch_mm)
*/
.align 5
ENTRY(cpu_arm922_set_pte)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
......@@ -376,6 +382,7 @@ ENTRY(cpu_arm922_set_pte)
mov r0, r0
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mcr p15, 0, r0, c7, c10, 4 @ drain WB
#endif /* CONFIG_MMU */
mov pc, lr
__INIT
......@@ -385,7 +392,9 @@ __arm922_setup:
mov r0, #0
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
#endif
mrc p15, 0, r0, c1, c0 @ get control register v4
ldr r5, arm922_cr1_clear
bic r0, r0, r5
......
......@@ -9,6 +9,8 @@
* Update for Linux-2.6 and cache flush improvements
* Copyright (C) 2004 Nokia Corporation by Tony Lindgren <tony@atomide.com>
*
* hacked for non-paged-MM by Hyok S. Choi, 2004.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
......@@ -122,7 +124,9 @@ ENTRY(cpu_arm925_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
#endif
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x000f @ ............wcam
bic ip, ip, #0x1100 @ ...i...s........
......@@ -369,6 +373,7 @@ ENTRY(cpu_arm925_dcache_clean_area)
*/
.align 5
ENTRY(cpu_arm925_switch_mm)
#ifdef CONFIG_MMU
mov ip, #0
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
......@@ -383,6 +388,7 @@ ENTRY(cpu_arm925_switch_mm)
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
#endif
mov pc, lr
/*
......@@ -392,6 +398,7 @@ ENTRY(cpu_arm925_switch_mm)
*/
.align 5
ENTRY(cpu_arm925_set_pte)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
......@@ -420,6 +427,7 @@ ENTRY(cpu_arm925_set_pte)
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
#endif
mcr p15, 0, r0, c7, c10, 4 @ drain WB
#endif /* CONFIG_MMU */
mov pc, lr
__INIT
......@@ -438,7 +446,9 @@ __arm925_setup:
mov r0, #0
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
#endif
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
mov r0, #4 @ disable write-back on caches explicitly
......
......@@ -3,6 +3,7 @@
*
* Copyright (C) 1999-2001 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd.
* hacked for non-paged-MM by Hyok S. Choi, 2003.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -85,7 +86,9 @@ ENTRY(cpu_arm926_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
#endif
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x000f @ ............wcam
bic ip, ip, #0x1100 @ ...i...s........
......@@ -329,6 +332,7 @@ ENTRY(cpu_arm926_dcache_clean_area)
*/
.align 5
ENTRY(cpu_arm926_switch_mm)
#ifdef CONFIG_MMU
mov ip, #0
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
......@@ -341,6 +345,7 @@ ENTRY(cpu_arm926_switch_mm)
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
#endif
mov pc, lr
/*
......@@ -350,6 +355,7 @@ ENTRY(cpu_arm926_switch_mm)
*/
.align 5
ENTRY(cpu_arm926_set_pte)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
......@@ -378,6 +384,7 @@ ENTRY(cpu_arm926_set_pte)
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
#endif
mcr p15, 0, r0, c7, c10, 4 @ drain WB
#endif
mov pc, lr
__INIT
......@@ -387,7 +394,9 @@ __arm926_setup:
mov r0, #0
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
#endif
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
......
......@@ -2,6 +2,7 @@
* linux/arch/arm/mm/proc-sa110.S
*
* Copyright (C) 1997-2002 Russell King
* hacked for non-paged-MM by Hyok S. Choi, 2003.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -67,7 +68,9 @@ ENTRY(cpu_sa110_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
#endif
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x000f @ ............wcam
bic ip, ip, #0x1100 @ ...i...s........
......@@ -130,11 +133,15 @@ ENTRY(cpu_sa110_dcache_clean_area)
*/
.align 5
ENTRY(cpu_sa110_switch_mm)
#ifdef CONFIG_MMU
str lr, [sp, #-4]!
bl v4wb_flush_kern_cache_all @ clears IP
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
ldr pc, [sp], #4
#else
mov pc, lr
#endif
/*
* cpu_sa110_set_pte(ptep, pte)
......@@ -143,6 +150,7 @@ ENTRY(cpu_sa110_switch_mm)
*/
.align 5
ENTRY(cpu_sa110_set_pte)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
......@@ -164,6 +172,7 @@ ENTRY(cpu_sa110_set_pte)
mov r0, r0
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mcr p15, 0, r0, c7, c10, 4 @ drain WB
#endif
mov pc, lr
__INIT
......@@ -173,7 +182,9 @@ __sa110_setup:
mov r10, #0
mcr p15, 0, r10, c7, c7 @ invalidate I,D caches on v4
mcr p15, 0, r10, c7, c10, 4 @ drain write buffer on v4
#ifdef CONFIG_MMU
mcr p15, 0, r10, c8, c7 @ invalidate I,D TLBs on v4
#endif
mrc p15, 0, r0, c1, c0 @ get control register v4
ldr r5, sa110_cr1_clear
bic r0, r0, r5
......
......@@ -2,6 +2,7 @@
* linux/arch/arm/mm/proc-sa1100.S
*
* Copyright (C) 1997-2002 Russell King
* hacked for non-paged-MM by Hyok S. Choi, 2003.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -77,7 +78,9 @@ ENTRY(cpu_sa1100_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
#endif
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x000f @ ............wcam
bic ip, ip, #0x1100 @ ...i...s........
......@@ -142,12 +145,16 @@ ENTRY(cpu_sa1100_dcache_clean_area)
*/
.align 5
ENTRY(cpu_sa1100_switch_mm)
#ifdef CONFIG_MMU
str lr, [sp, #-4]!
bl v4wb_flush_kern_cache_all @ clears IP
mcr p15, 0, ip, c9, c0, 0 @ invalidate RB
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
ldr pc, [sp], #4
#else
mov pc, lr
#endif
/*
* cpu_sa1100_set_pte(ptep, pte)
......@@ -156,6 +163,7 @@ ENTRY(cpu_sa1100_switch_mm)
*/
.align 5
ENTRY(cpu_sa1100_set_pte)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
......@@ -177,6 +185,7 @@ ENTRY(cpu_sa1100_set_pte)
mov r0, r0
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mcr p15, 0, r0, c7, c10, 4 @ drain WB
#endif
mov pc, lr
__INIT
......@@ -186,7 +195,9 @@ __sa1100_setup:
mov r0, #0
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
#endif
mrc p15, 0, r0, c1, c0 @ get control register v4
ldr r5, sa1100_cr1_clear
bic r0, r0, r5
......
......@@ -2,6 +2,7 @@
* linux/arch/arm/mm/proc-v6.S
*
* Copyright (C) 2001 Deep Blue Solutions Ltd.
* Modified by Catalin Marinas for noMMU support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -88,6 +89,7 @@ ENTRY(cpu_v6_dcache_clean_area)
* - we are not using split page tables
*/
ENTRY(cpu_v6_switch_mm)
#ifdef CONFIG_MMU
mov r2, #0
ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
#ifdef CONFIG_SMP
......@@ -97,6 +99,7 @@ ENTRY(cpu_v6_switch_mm)
mcr p15, 0, r2, c7, c10, 4 @ drain write buffer
mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
mcr p15, 0, r1, c13, c0, 1 @ set context ID
#endif
mov pc, lr
/*
......@@ -119,6 +122,7 @@ ENTRY(cpu_v6_switch_mm)
* 1111 0 1 1 r/w r/w
*/
ENTRY(cpu_v6_set_pte)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
bic r2, r1, #0x000003f0
......@@ -145,6 +149,7 @@ ENTRY(cpu_v6_set_pte)
str r2, [r0]
mcr p15, 0, r0, c7, c10, 1 @ flush_pte
#endif
mov pc, lr
......@@ -194,12 +199,14 @@ __v6_setup:
mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
mcr p15, 0, r0, c7, c15, 0 @ clean+invalidate cache
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs
mcr p15, 0, r0, c2, c0, 2 @ TTB control register
#ifdef CONFIG_SMP
orr r4, r4, #TTB_RGN_WBWA|TTB_S @ mark PTWs shared, outer cacheable
#endif
mcr p15, 0, r4, c2, c0, 1 @ load TTB1
#endif /* CONFIG_MMU */
#ifdef CONFIG_VFP
mrc p15, 0, r0, c1, c0, 2
orr r0, r0, #(0xf << 20)
......
......@@ -10,8 +10,12 @@
#ifndef __ASM_BUGS_H
#define __ASM_BUGS_H
#ifdef CONFIG_MMU
extern void check_writebuffer_bugs(void);
#define check_bugs() check_writebuffer_bugs()
#else
#define check_bugs() do { } while (0)
#endif
#endif
......@@ -50,6 +50,8 @@
#define domain_val(dom,type) ((type) << (2*(dom)))
#ifndef __ASSEMBLY__
#ifdef CONFIG_MMU
#define set_domain(x) \
do { \
__asm__ __volatile__( \
......@@ -66,5 +68,10 @@
set_domain(thread->cpu_domain); \
} while (0)
#else
#define set_domain(x) do { } while (0)
#define modify_domain(dom,type) do { } while (0)
#endif
#endif
#endif /* !__ASSEMBLY__ */
......@@ -16,8 +16,6 @@ struct map_desc {
unsigned int type;
};
struct meminfo;
#define MT_DEVICE 0
#define MT_CACHECLEAN 1
#define MT_MINICLEAN 2
......@@ -28,7 +26,8 @@ struct meminfo;
#define MT_IXP2000_DEVICE 7
#define MT_NONSHARED_DEVICE 8
extern void create_memmap_holes(struct meminfo *);
extern void memtable_init(struct meminfo *);
#ifdef CONFIG_MMU
extern void iotable_init(struct map_desc *, int);
extern void setup_io_desc(void);
#else
#define iotable_init(map,num) do { } while (0)
#endif
......@@ -2,6 +2,7 @@
* linux/include/asm-arm/memory.h
*
* Copyright (C) 2000-2002 Russell King
* modification for nommu, Hyok S. Choi, 2004
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -26,6 +27,8 @@
#include <asm/arch/memory.h>
#include <asm/sizes.h>
#ifdef CONFIG_MMU
#ifndef TASK_SIZE
/*
* TASK_SIZE - the maximum size of a user space task.
......@@ -47,6 +50,60 @@
#define PAGE_OFFSET UL(0xc0000000)
#endif
/*
* The module space lives between the addresses given by TASK_SIZE
* and PAGE_OFFSET - it must be within 32MB of the kernel text.
*/
#define MODULE_END (PAGE_OFFSET)
#define MODULE_START (MODULE_END - 16*1048576)
#if TASK_SIZE > MODULE_START
#error Top of user space clashes with start of module space
#endif
/*
* The XIP kernel gets mapped at the bottom of the module vm area.
* Since we use sections to map it, this macro replaces the physical address
* with its virtual address while keeping offset from the base section.
*/
#define XIP_VIRT_ADDR(physaddr) (MODULE_START + ((physaddr) & 0x000fffff))
#else /* CONFIG_MMU */
/*
* The limitation of user task size can grow up to the end of free ram region.
* It is difficult to define and perhaps will never meet the original meaning
* of this define that was meant to.
* Fortunately, there is no reference for this in noMMU mode, for now.
*/
#ifndef TASK_SIZE
#define TASK_SIZE (CONFIG_DRAM_SIZE)
#endif
#ifndef TASK_UNMAPPED_BASE
#define TASK_UNMAPPED_BASE UL(0x00000000)
#endif
#ifndef PHYS_OFFSET
#define PHYS_OFFSET (CONFIG_DRAM_BASE)
#endif
#ifndef END_MEM
#define END_MEM (CONFIG_DRAM_BASE + CONFIG_DRAM_SIZE)
#endif
#ifndef PAGE_OFFSET
#define PAGE_OFFSET (PHYS_OFFSET)
#endif
/*
* The module can be at any place in ram in nommu mode.
*/
#define MODULE_END (END_MEM)
#define MODULE_START (PHYS_OFFSET)
#endif /* !CONFIG_MMU */
/*
* Size of DMA-consistent memory region. Must be multiple of 2M,
* between 2MB and 14MB inclusive.
......@@ -71,24 +128,6 @@
#define __phys_to_pfn(paddr) ((paddr) >> PAGE_SHIFT)
#define __pfn_to_phys(pfn) ((pfn) << PAGE_SHIFT)
/*
* The module space lives between the addresses given by TASK_SIZE
* and PAGE_OFFSET - it must be within 32MB of the kernel text.
*/
#define MODULE_END (PAGE_OFFSET)
#define MODULE_START (MODULE_END - 16*1048576)
#if TASK_SIZE > MODULE_START
#error Top of user space clashes with start of module space
#endif
/*
* The XIP kernel gets mapped at the bottom of the module vm area.
* Since we use sections to map it, this macro replaces the physical address
* with its virtual address while keeping offset from the base section.
*/
#define XIP_VIRT_ADDR(physaddr) (MODULE_START + ((physaddr) & 0x000fffff))
#ifndef __ASSEMBLY__
/*
......
#ifndef __ARM_MMU_H
#define __ARM_MMU_H
#ifdef CONFIG_MMU
typedef struct {
#if __LINUX_ARM_ARCH__ >= 6
unsigned int id;
......@@ -13,4 +15,18 @@ typedef struct {
#define ASID(mm) (0)
#endif
#else
/*
* From nommu.h:
* Copyright (C) 2002, David McCullough <davidm@snapgear.com>
* modified for 2.6 by Hyok S. Choi <hyok.choi@samsung.com>
*/
typedef struct {
struct vm_list_struct *vmlist;
unsigned long end_brk;
} mm_context_t;
#endif
#endif
......@@ -82,6 +82,7 @@ static inline void
switch_mm(struct mm_struct *prev, struct mm_struct *next,
struct task_struct *tsk)
{
#ifdef CONFIG_MMU
unsigned int cpu = smp_processor_id();
if (prev != next) {
......@@ -91,6 +92,7 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
if (cache_is_vivt())
cpu_clear(cpu, prev->cpu_vm_mask);
}
#endif
}
#define deactivate_mm(tsk,mm) do { } while (0)
......
/*
* linux/include/asm-arm/page-nommu.h
*
* Copyright (C) 2004 Hyok S. Choi
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _ASMARM_PAGE_NOMMU_H
#define _ASMARM_PAGE_NOMMU_H
#if !defined(CONFIG_SMALL_TASKS) && PAGE_SHIFT < 13
#define KTHREAD_SIZE (8192)
#else
#define KTHREAD_SIZE PAGE_SIZE
#endif
#define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
#define free_user_page(page, addr) free_page(addr)
#define clear_page(page) memset((page), 0, PAGE_SIZE)
#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE)
#define clear_user_page(page, vaddr, pg) clear_page(page)
#define copy_user_page(to, from, vaddr, pg) copy_page(to, from)
/*
* These are used to make use of C type-checking..
*/
typedef unsigned long pte_t;
typedef unsigned long pmd_t;
typedef unsigned long pgd_t[2];
typedef unsigned long pgprot_t;
#define pte_val(x) (x)
#define pmd_val(x) (x)
#define pgd_val(x) ((x)[0])
#define pgprot_val(x) (x)
#define __pte(x) (x)
#define __pmd(x) (x)
#define __pgprot(x) (x)
/* to align the pointer to the (next) page boundary */
#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK)
extern unsigned long memory_start;
extern unsigned long memory_end;
#endif
......@@ -23,6 +23,12 @@
#ifndef __ASSEMBLY__
#ifndef CONFIG_MMU
#include "page-nommu.h"
#else
#include <asm/glue.h>
/*
......@@ -171,6 +177,8 @@ typedef unsigned long pgprot_t;
/* the upper-most page table pointer */
extern pmd_t *top_pmd;
#endif /* CONFIG_MMU */
#include <asm/memory.h>
#endif /* !__ASSEMBLY__ */
......
......@@ -16,6 +16,10 @@
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
#define check_pgt_cache() do { } while (0)
#ifdef CONFIG_MMU
#define _PAGE_USER_TABLE (PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_USER))
#define _PAGE_KERNEL_TABLE (PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_KERNEL))
......@@ -32,8 +36,6 @@ extern void free_pgd_slow(pgd_t *pgd);
#define pgd_alloc(mm) get_pgd_slow(mm)
#define pgd_free(pgd) free_pgd_slow(pgd)
#define check_pgt_cache() do { } while (0)
/*
* Allocate one PTE table.
*
......@@ -126,4 +128,6 @@ pmd_populate(struct mm_struct *mm, pmd_t *pmdp, struct page *ptep)
__pmd_populate(pmdp, page_to_pfn(ptep) << PAGE_SHIFT | _PAGE_USER_TABLE);
}
#endif /* CONFIG_MMU */
#endif
/*
* linux/include/asm-arm/pgtable-nommu.h
*
* Copyright (C) 1995-2002 Russell King
* Copyright (C) 2004 Hyok S. Choi
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _ASMARM_PGTABLE_NOMMU_H
#define _ASMARM_PGTABLE_NOMMU_H
#ifndef __ASSEMBLY__
#include <linux/config.h>
#include <linux/slab.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/io.h>
/*
* Trivial page table functions.
*/
#define pgd_present(pgd) (1)
#define pgd_none(pgd) (0)
#define pgd_bad(pgd) (0)
#define pgd_clear(pgdp)
#define kern_addr_valid(addr) (1)
#define pmd_offset(a, b) ((void *)0)
/* FIXME */
/*
* PMD_SHIFT determines the size of the area a second-level page table can map
* PGDIR_SHIFT determines what a third-level page table entry can map
*/
#define PGDIR_SHIFT 21
#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
#define PGDIR_MASK (~(PGDIR_SIZE-1))
/* FIXME */
#define PAGE_NONE __pgprot(0)
#define PAGE_SHARED __pgprot(0)
#define PAGE_COPY __pgprot(0)
#define PAGE_READONLY __pgprot(0)
#define PAGE_KERNEL __pgprot(0)
//extern void paging_init(struct meminfo *, struct machine_desc *);
#define swapper_pg_dir ((pgd_t *) 0)
#define __swp_type(x) (0)
#define __swp_offset(x) (0)
#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) })
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
typedef pte_t *pte_addr_t;
static inline int pte_file(pte_t pte) { return 0; }
/*
* ZERO_PAGE is a global shared page that is always zero: used
* for zero-mapped memory areas etc..
*/
#define ZERO_PAGE(vaddr) (virt_to_page(0))
/*
* Mark the prot value as uncacheable and unbufferable.
*/
#define pgprot_noncached(prot) __pgprot(0)
#define pgprot_writecombine(prot) __pgprot(0)
/*
* These would be in other places but having them here reduces the diffs.
*/
extern unsigned int kobjsize(const void *objp);
extern int is_in_rom(unsigned long);
/*
* No page table caches to initialise.
*/
#define pgtable_cache_init() do { } while (0)
#define io_remap_page_range remap_page_range
#define io_remap_pfn_range remap_pfn_range
#define MK_IOSPACE_PFN(space, pfn) (pfn)
#define GET_IOSPACE(pfn) 0
#define GET_PFN(pfn) (pfn)
/*
* All 32bit addresses are effectively valid for vmalloc...
* Sort of meaningless for non-VM targets.
*/
#define VMALLOC_START 0
#define VMALLOC_END 0xffffffff
#define FIRST_USER_ADDRESS (0)
#else
/*
* dummy tlb and user structures.
*/
#define v3_tlb_fns (0)
#define v4_tlb_fns (0)
#define v4wb_tlb_fns (0)
#define v4wbi_tlb_fns (0)
#define v6_tlb_fns (0)
#define v3_user_fns (0)
#define v4_user_fns (0)
#define v4_mc_user_fns (0)
#define v4wb_user_fns (0)
#define v4wt_user_fns (0)
#define v6_user_fns (0)
#define xscale_mc_user_fns (0)
#endif /*__ASSEMBLY__*/
#endif /* _ASMARM_PGTABLE_H */
......@@ -11,9 +11,15 @@
#define _ASMARM_PGTABLE_H
#include <asm-generic/4level-fixup.h>
#include <asm/proc-fns.h>
#ifndef CONFIG_MMU
#include "pgtable-nommu.h"
#else
#include <asm/memory.h>
#include <asm/proc-fns.h>
#include <asm/arch/vmalloc.h>
/*
......@@ -378,4 +384,6 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
#endif /* !__ASSEMBLY__ */
#endif /* CONFIG_MMU */
#endif /* _ASMARM_PGTABLE_H */
......@@ -165,6 +165,8 @@
#include <asm/memory.h>
#ifdef CONFIG_MMU
#define cpu_switch_mm(pgd,mm) cpu_do_switch_mm(virt_to_phys(pgd),mm)
#define cpu_get_pgd() \
......@@ -176,6 +178,8 @@
(pgd_t *)phys_to_virt(pg); \
})
#endif
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* __ASM_PROCFNS_H */
......@@ -40,16 +40,25 @@ struct exception_table_entry
extern int fixup_exception(struct pt_regs *regs);
/*
* These two are intentionally not defined anywhere - if the kernel
* code generates any references to them, that's a bug.
*/
extern int __get_user_bad(void);
extern int __put_user_bad(void);
/*
* Note that this is actually 0x1,0000,0000
*/
#define KERNEL_DS 0x00000000
#define USER_DS TASK_SIZE
#define get_ds() (KERNEL_DS)
#ifdef CONFIG_MMU
#define USER_DS TASK_SIZE
#define get_fs() (current_thread_info()->addr_limit)
static inline void set_fs (mm_segment_t fs)
static inline void set_fs(mm_segment_t fs)
{
current_thread_info()->addr_limit = fs;
modify_domain(DOMAIN_KERNEL, fs ? DOMAIN_CLIENT : DOMAIN_MANAGER);
......@@ -75,8 +84,6 @@ static inline void set_fs (mm_segment_t fs)
: "cc"); \
flag; })
#define access_ok(type,addr,size) (__range_ok(addr,size) == 0)
/*
* Single-value transfer routines. They automatically use the right
* size if we just have the right pointer type. Note that the functions
......@@ -87,20 +94,10 @@ static inline void set_fs (mm_segment_t fs)
* fixup code, but there are a few places where it intrudes on the
* main code path. When we only write to user space, there is no
* problem.
*
* The "__xxx" versions of the user access functions do not verify the
* address space - it must have been done previously with a separate
* "access_ok()" call.
*
* The "xxx_error" versions set the third argument to EFAULT if an
* error occurs, and leave it unchanged on success. Note that these
* versions are void (ie, don't return a value as such).
*/
extern int __get_user_1(void *);
extern int __get_user_2(void *);
extern int __get_user_4(void *);
extern int __get_user_bad(void);
#define __get_user_x(__r2,__p,__e,__s,__i...) \
__asm__ __volatile__ ( \
......@@ -131,6 +128,74 @@ extern int __get_user_bad(void);
__e; \
})
extern int __put_user_1(void *, unsigned int);
extern int __put_user_2(void *, unsigned int);
extern int __put_user_4(void *, unsigned int);
extern int __put_user_8(void *, unsigned long long);
#define __put_user_x(__r2,__p,__e,__s) \
__asm__ __volatile__ ( \
__asmeq("%0", "r0") __asmeq("%2", "r2") \
"bl __put_user_" #__s \
: "=&r" (__e) \
: "0" (__p), "r" (__r2) \
: "ip", "lr", "cc")
#define put_user(x,p) \
({ \
const register typeof(*(p)) __r2 asm("r2") = (x); \
const register typeof(*(p)) __user *__p asm("r0") = (p);\
register int __e asm("r0"); \
switch (sizeof(*(__p))) { \
case 1: \
__put_user_x(__r2, __p, __e, 1); \
break; \
case 2: \
__put_user_x(__r2, __p, __e, 2); \
break; \
case 4: \
__put_user_x(__r2, __p, __e, 4); \
break; \
case 8: \
__put_user_x(__r2, __p, __e, 8); \
break; \
default: __e = __put_user_bad(); break; \
} \
__e; \
})
#else /* CONFIG_MMU */
/*
* uClinux has only one addr space, so has simplified address limits.
*/
#define USER_DS KERNEL_DS
#define segment_eq(a,b) (1)
#define __addr_ok(addr) (1)
#define __range_ok(addr,size) (0)
#define get_fs() (KERNEL_DS)
static inline void set_fs(mm_segment_t fs)
{
}
#define get_user(x,p) __get_user(x,p)
#define put_user(x,p) __put_user(x,p)
#endif /* CONFIG_MMU */
#define access_ok(type,addr,size) (__range_ok(addr,size) == 0)
/*
* The "__xxx" versions of the user access functions do not verify the
* address space - it must have been done previously with a separate
* "access_ok()" call.
*
* The "xxx_error" versions set the third argument to EFAULT if an
* error occurs, and leave it unchanged on success. Note that these
* versions are void (ie, don't return a value as such).
*/
#define __get_user(x,ptr) \
({ \
long __gu_err = 0; \
......@@ -212,43 +277,6 @@ do { \
: "r" (addr), "i" (-EFAULT) \
: "cc")
extern int __put_user_1(void *, unsigned int);
extern int __put_user_2(void *, unsigned int);
extern int __put_user_4(void *, unsigned int);
extern int __put_user_8(void *, unsigned long long);
extern int __put_user_bad(void);
#define __put_user_x(__r2,__p,__e,__s) \
__asm__ __volatile__ ( \
__asmeq("%0", "r0") __asmeq("%2", "r2") \
"bl __put_user_" #__s \
: "=&r" (__e) \
: "0" (__p), "r" (__r2) \
: "ip", "lr", "cc")
#define put_user(x,p) \
({ \
const register typeof(*(p)) __r2 asm("r2") = (x); \
const register typeof(*(p)) __user *__p asm("r0") = (p);\
register int __e asm("r0"); \
switch (sizeof(*(__p))) { \
case 1: \
__put_user_x(__r2, __p, __e, 1); \
break; \
case 2: \
__put_user_x(__r2, __p, __e, 2); \
break; \
case 4: \
__put_user_x(__r2, __p, __e, 4); \
break; \
case 8: \
__put_user_x(__r2, __p, __e, 8); \
break; \
default: __e = __put_user_bad(); break; \
} \
__e; \
})
#define __put_user(x,ptr) \
({ \
long __pu_err = 0; \
......@@ -354,9 +382,16 @@ do { \
: "cc")
#ifdef CONFIG_MMU
extern unsigned long __copy_from_user(void *to, const void __user *from, unsigned long n);
extern unsigned long __copy_to_user(void __user *to, const void *from, unsigned long n);
extern unsigned long __clear_user(void __user *addr, unsigned long n);
#else
#define __copy_from_user(to,from,n) (memcpy(to, (void __force *)from, n), 0)
#define __copy_to_user(to,from,n) (memcpy((void __force *)to, from, n), 0)
#define __clear_user(addr,n) (memset((void __force *)addr, 0, n), 0)
#endif
extern unsigned long __strncpy_from_user(char *to, const char __user *from, unsigned long count);
extern unsigned long __strnlen_user(const char __user *s, long n);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment