[PATCH] Fix 2.6.18-rc6 IDE breakage, add missing ident needed for current VIA boards

There are two changes here.  The first reverses the broken PCI_DEVICE
conversion back to the old format.  The second adds a missing PCI ID so
you can actually boot 2.6.18 on 2 month old VIA motherboards (right now
only 2.6.18-mm works).

CC'd to Jeff to check the PCI ident but its a) in several distro kernels
and b) in 2.6.18-mm [twice ??]
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

drivers/ide/pci/aec62xx.c

@@ -425,12 +425,12 @@ static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_devi
 	return d->init_setup(dev, d);
 }
 
-static const struct pci_device_id aec62xx_pci_tbl[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF), 0 },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860), 1 },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860R), 2 },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865), 3 },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865R), 4 },
+static struct pci_device_id aec62xx_pci_tbl[] = {
+	{ PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
+	{ PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860R,  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
+	{ PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 },
+	{ PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865R,  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, aec62xx_pci_tbl);

drivers/ide/pci/serverworks.c

@@ -649,11 +649,11 @@ static int __devinit svwks_init_one(struct pci_dev *dev, const struct pci_device
 }
 
 static struct pci_device_id svwks_pci_tbl[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE), 0},
-	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE), 1},
-	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE), 2},
-	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2), 3},
-	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE), 4},
+	{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
+	{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
+	{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},
+	{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, svwks_pci_tbl);

drivers/ide/pci/siimage.c

@@ -1082,10 +1082,10 @@ static int __devinit siimage_init_one(struct pci_dev *dev, const struct pci_devi
 }
 
 static struct pci_device_id siimage_pci_tbl[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680), 0},
+	{ PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680,  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 #ifdef CONFIG_BLK_DEV_IDE_SATA
-	{ PCI_DEVICE(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_3112), 1},
-	{ PCI_DEVICE(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_1210SA), 2},
+	{ PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
+	{ PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_1210SA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
 #endif
 	{ 0, },
 };

drivers/scsi/sata_via.c

@@ -77,6 +77,7 @@ static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
 static void vt6420_error_handler(struct ata_port *ap);
 
 static const struct pci_device_id svia_pci_tbl[] = {
+	{ 0x1106, 0x0591, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6420 },
 	{ 0x1106, 0x3149, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6420 },
 	{ 0x1106, 0x3249, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6421 },