Commit 291e0c49 authored by Geert Uytterhoeven's avatar Geert Uytterhoeven Committed by Simon Horman

arm64: dts: r8a7795: Add support for R-Car H3 ES2.0

Update r8a7795.dtsi so it corresponds to R-Car H3 ES2.0 or later:
  - The following devices no longer exist on ES2.0, and are thus removed:
    fcpf2, fcpvd3, fcpvi2, fdp1-2, usb3-if1, vspd3, vspi2.
  - The DU <-> VSPD topology is different on ES2.0, hence remove the
    "compatible" and "vsps" properties from the DU node until the driver
    can handle this.

Move support for the ES1.x revision of the R-Car H3 SoC into a
separate file.  To avoid duplication, r8a7795-es1.dtsi includes
r8a7795.dtsi, and adds device nodes and properties where needed.
Note that while currently r8a7795-es1.dtsi only adds device nodes,
removal of devices nodes and properties can be implemented using the
/delete-node/ and /delete-property/ keywords, as shown below:

	&soc {
		/delete-node/ <name>@<addr>;
	};

	&<label> {
		/delete-property/ <prop>;
	};

Switch r8a7795-salvator-x.dts and r8a7795-h3ulcb.dts from r8a7795.dtsi
to r8a7795-es1.dtsi to preserve compatibility.
Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent 133ace3f
/*
* Device Tree Source for the r8a7795 ES1.x SoC
*
* Copyright (C) 2015 Renesas Electronics Corp.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include "r8a7795.dtsi"
&soc {
xhci1: usb@ee0400000 {
compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
reg = <0 0xee040000 0 0xc00>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 327>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 327>;
status = "disabled";
};
fcpf2: fcp@fe952000 {
compatible = "renesas,fcpf";
reg = <0 0xfe952000 0 0x200>;
clocks = <&cpg CPG_MOD 613>;
power-domains = <&sysc R8A7795_PD_A3VP>;
resets = <&cpg 613>;
};
vspi2: vsp@fe9c0000 {
compatible = "renesas,vsp2";
reg = <0 0xfe9c0000 0 0x8000>;
interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 629>;
power-domains = <&sysc R8A7795_PD_A3VP>;
resets = <&cpg 629>;
renesas,fcp = <&fcpvi2>;
};
fcpvi2: fcp@fe9cf000 {
compatible = "renesas,fcpv";
reg = <0 0xfe9cf000 0 0x200>;
clocks = <&cpg CPG_MOD 609>;
power-domains = <&sysc R8A7795_PD_A3VP>;
resets = <&cpg 609>;
};
vspd3: vsp@fea38000 {
compatible = "renesas,vsp2";
reg = <0 0xfea38000 0 0x4000>;
interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 620>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 620>;
renesas,fcp = <&fcpvd3>;
};
fcpvd3: fcp@fea3f000 {
compatible = "renesas,fcpv";
reg = <0 0xfea3f000 0 0x200>;
clocks = <&cpg CPG_MOD 600>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 600>;
};
fdp1@fe948000 {
compatible = "renesas,fdp1";
reg = <0 0xfe948000 0 0x2400>;
interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 117>;
power-domains = <&sysc R8A7795_PD_A3VP>;
resets = <&cpg 117>;
renesas,fcp = <&fcpf2>;
};
};
&du {
compatible = "renesas,du-r8a7795";
vsps = <&vspd0 &vspd1 &vspd2 &vspd3>;
};
......@@ -12,11 +12,11 @@
#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
/dts-v1/;
#include "r8a7795.dtsi"
#include "r8a7795-es1.dtsi"
#include "ulcb.dtsi"
/ {
model = "Renesas H3ULCB board based on r8a7795";
model = "Renesas H3ULCB board based on r8a7795 ES1.x";
compatible = "renesas,h3ulcb", "renesas,r8a7795";
memory@48000000 {
......
......@@ -11,11 +11,11 @@
#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
/dts-v1/;
#include "r8a7795.dtsi"
#include "r8a7795-es1.dtsi"
#include "salvator-x.dtsi"
/ {
model = "Renesas Salvator-X board based on r8a7795";
model = "Renesas Salvator-X board based on r8a7795 ES1.x";
compatible = "renesas,salvator-x", "renesas,r8a7795";
memory@48000000 {
......
......@@ -182,7 +182,7 @@ pcie_bus_clk: pcie_bus {
clock-frequency = <0>;
};
soc {
soc: soc {
compatible = "simple-bus";
interrupt-parent = <&gic>;
......@@ -1274,16 +1274,6 @@ xhci0: usb@ee000000 {
status = "disabled";
};
xhci1: usb@ee0400000 {
compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
reg = <0 0xee040000 0 0xc00>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 327>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 327>;
status = "disabled";
};
usb_dmac0: dma-controller@e65a0000 {
compatible = "renesas,r8a7795-usb-dmac",
"renesas,usb-dmac";
......@@ -1568,14 +1558,6 @@ fcpf1: fcp@fe951000 {
resets = <&cpg 614>;
};
fcpf2: fcp@fe952000 {
compatible = "renesas,fcpf";
reg = <0 0xfe952000 0 0x200>;
clocks = <&cpg CPG_MOD 613>;
power-domains = <&sysc R8A7795_PD_A3VP>;
resets = <&cpg 613>;
};
vspbd: vsp@fe960000 {
compatible = "renesas,vsp2";
reg = <0 0xfe960000 0 0x8000>;
......@@ -1633,25 +1615,6 @@ fcpvi1: fcp@fe9bf000 {
resets = <&cpg 610>;
};
vspi2: vsp@fe9c0000 {
compatible = "renesas,vsp2";
reg = <0 0xfe9c0000 0 0x8000>;
interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 629>;
power-domains = <&sysc R8A7795_PD_A3VP>;
resets = <&cpg 629>;
renesas,fcp = <&fcpvi2>;
};
fcpvi2: fcp@fe9cf000 {
compatible = "renesas,fcpv";
reg = <0 0xfe9cf000 0 0x200>;
clocks = <&cpg CPG_MOD 609>;
power-domains = <&sysc R8A7795_PD_A3VP>;
resets = <&cpg 609>;
};
vspd0: vsp@fea20000 {
compatible = "renesas,vsp2";
reg = <0 0xfea20000 0 0x4000>;
......@@ -1709,25 +1672,6 @@ fcpvd2: fcp@fea37000 {
resets = <&cpg 601>;
};
vspd3: vsp@fea38000 {
compatible = "renesas,vsp2";
reg = <0 0xfea38000 0 0x4000>;
interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 620>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 620>;
renesas,fcp = <&fcpvd3>;
};
fcpvd3: fcp@fea3f000 {
compatible = "renesas,fcpv";
reg = <0 0xfea3f000 0 0x200>;
clocks = <&cpg CPG_MOD 600>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 600>;
};
fdp1@fe940000 {
compatible = "renesas,fdp1";
reg = <0 0xfe940000 0 0x2400>;
......@@ -1748,16 +1692,6 @@ fdp1@fe944000 {
renesas,fcp = <&fcpf1>;
};
fdp1@fe948000 {
compatible = "renesas,fdp1";
reg = <0 0xfe948000 0 0x2400>;
interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 117>;
power-domains = <&sysc R8A7795_PD_A3VP>;
resets = <&cpg 117>;
renesas,fcp = <&fcpf2>;
};
hdmi0: hdmi0@fead0000 {
compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi";
reg = <0 0xfead0000 0 0x10000>;
......@@ -1809,7 +1743,6 @@ port@1 {
};
du: display@feb00000 {
compatible = "renesas,du-r8a7795";
reg = <0 0xfeb00000 0 0x80000>,
<0 0xfeb90000 0 0x14>;
reg-names = "du", "lvds.0";
......@@ -1825,8 +1758,6 @@ du: display@feb00000 {
clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0";
status = "disabled";
vsps = <&vspd0 &vspd1 &vspd2 &vspd3>;
ports {
#address-cells = <1>;
#size-cells = <0>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment