spi: dw: Fix typo in few registers name

This patch will fix typo in the register name used in the source code,
to be consistent with the register name used in the databook.

Databook: DW_apb_ssi_databook.pdf version 4.01a
Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200505130618.554-2-wan.ahmad.zainie.wan.mohamad@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

drivers/spi/spi-dw.c

@@ -47,9 +47,9 @@ static ssize_t dw_spi_show_regs(struct file *file, char __user *user_buf,
 	len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len,
 			"=================================\n");
 	len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len,
-			"CTRL0: \t\t0x%08x\n", dw_readl(dws, DW_SPI_CTRL0));
+			"CTRLR0: \t0x%08x\n", dw_readl(dws, DW_SPI_CTRLR0));
 	len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len,
-			"CTRL1: \t\t0x%08x\n", dw_readl(dws, DW_SPI_CTRL1));
+			"CTRLR1: \t0x%08x\n", dw_readl(dws, DW_SPI_CTRLR1));
 	len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len,
 			"SSIENR: \t0x%08x\n", dw_readl(dws, DW_SPI_SSIENR));
 	len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len,
@@ -57,9 +57,9 @@ static ssize_t dw_spi_show_regs(struct file *file, char __user *user_buf,
 	len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len,
 			"BAUDR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_BAUDR));
 	len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len,
-			"TXFTLR: \t0x%08x\n", dw_readl(dws, DW_SPI_TXFLTR));
+			"TXFTLR: \t0x%08x\n", dw_readl(dws, DW_SPI_TXFTLR));
 	len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len,
-			"RXFTLR: \t0x%08x\n", dw_readl(dws, DW_SPI_RXFLTR));
+			"RXFTLR: \t0x%08x\n", dw_readl(dws, DW_SPI_RXFTLR));
 	len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len,
 			"TXFLR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_TXFLR));
 	len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len,
@@ -304,7 +304,7 @@ static int dw_spi_transfer_one(struct spi_controller *master,
 			(((spi->mode & SPI_LOOP) ? 1 : 0) << SPI_SRL_OFFSET))
 		| (chip->tmode << SPI_TMOD_OFFSET);
 
-	dw_writel(dws, DW_SPI_CTRL0, cr0);
+	dw_writel(dws, DW_SPI_CTRLR0, cr0);
 
 	/* Check if current transfer is a DMA transaction */
 	if (master->can_dma && master->can_dma(master, spi, transfer))
@@ -325,7 +325,7 @@ static int dw_spi_transfer_one(struct spi_controller *master,
 		}
 	} else {
 		txlevel = min_t(u16, dws->fifo_len / 2, dws->len / dws->n_bytes);
-		dw_writel(dws, DW_SPI_TXFLTR, txlevel);
+		dw_writel(dws, DW_SPI_TXFTLR, txlevel);
 
 		/* Set the interrupt mask */
 		imask |= SPI_INT_TXEI | SPI_INT_TXOI |
@@ -397,11 +397,11 @@ static void spi_hw_init(struct device *dev, struct dw_spi *dws)
 		u32 fifo;
 
 		for (fifo = 1; fifo < 256; fifo++) {
-			dw_writel(dws, DW_SPI_TXFLTR, fifo);
-			if (fifo != dw_readl(dws, DW_SPI_TXFLTR))
+			dw_writel(dws, DW_SPI_TXFTLR, fifo);
+			if (fifo != dw_readl(dws, DW_SPI_TXFTLR))
 				break;
 		}
-		dw_writel(dws, DW_SPI_TXFLTR, 0);
+		dw_writel(dws, DW_SPI_TXFTLR, 0);
 
 		dws->fifo_len = (fifo == 1) ? 0 : fifo;
 		dev_dbg(dev, "Detected FIFO size: %u bytes\n", dws->fifo_len);

drivers/spi/spi-dw.h

@@ -6,14 +6,14 @@
 #include <linux/scatterlist.h>
 
 /* Register offsets */
-#define DW_SPI_CTRL0			0x00
-#define DW_SPI_CTRL1			0x04
+#define DW_SPI_CTRLR0			0x00
+#define DW_SPI_CTRLR1			0x04
 #define DW_SPI_SSIENR			0x08
 #define DW_SPI_MWCR			0x0c
 #define DW_SPI_SER			0x10
 #define DW_SPI_BAUDR			0x14
-#define DW_SPI_TXFLTR			0x18
-#define DW_SPI_RXFLTR			0x1c
+#define DW_SPI_TXFTLR			0x18
+#define DW_SPI_RXFTLR			0x1c
 #define DW_SPI_TXFLR			0x20
 #define DW_SPI_RXFLR			0x24
 #define DW_SPI_SR			0x28