[S390] replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

drivers/s390/block/dasd.c

@@ -980,12 +980,12 @@ void dasd_int_handler(struct ccw_device *cdev, unsigned long intparm,
 			break;
 		case -ETIMEDOUT:
 			printk(KERN_WARNING"%s(%s): request timed out\n",
-			       __FUNCTION__, cdev->dev.bus_id);
+			       __func__, cdev->dev.bus_id);
 			//FIXME - dasd uses own timeout interface...
 			break;
 		default:
 			printk(KERN_WARNING"%s(%s): unknown error %ld\n",
-			       __FUNCTION__, cdev->dev.bus_id, PTR_ERR(irb));
+			       __func__, cdev->dev.bus_id, PTR_ERR(irb));
 		}
 		return;
 	}

drivers/s390/char/tape_34xx.c

@@ -394,7 +394,7 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request,
 			return tape_34xx_erp_failed(request, -ENOSPC);
 		default:
 			PRINT_ERR("Invalid op in %s:%i\n",
-				  __FUNCTION__, __LINE__);
+				  __func__, __LINE__);
 			return tape_34xx_erp_failed(request, 0);
 		}
 	}

drivers/s390/char/vmwatchdog.c

@@ -96,7 +96,7 @@ static int vmwdt_keepalive(void)
 
 	if (ret) {
 		printk(KERN_WARNING "%s: problem setting interval %d, "
-			"cmd %s\n", __FUNCTION__, vmwdt_interval,
+			"cmd %s\n", __func__, vmwdt_interval,
 			vmwdt_cmd);
 	}
 	return ret;
@@ -107,7 +107,7 @@ static int vmwdt_disable(void)
 	int ret = __diag288(wdt_cancel, 0, "", 0);
 	if (ret) {
 		printk(KERN_WARNING "%s: problem disabling watchdog\n",
-			__FUNCTION__);
+			__func__);
 	}
 	return ret;
 }

drivers/s390/char/zcore.c

@@ -224,7 +224,7 @@ static int __init init_cpu_info(enum arch_id arch)
 
 	sa = kmalloc(sizeof(*sa), GFP_KERNEL);
 	if (!sa) {
-		ERROR_MSG("kmalloc failed: %s: %i\n",__FUNCTION__, __LINE__);
+		ERROR_MSG("kmalloc failed: %s: %i\n",__func__, __LINE__);
 		return -ENOMEM;
 	}
 	if (memcpy_hsa_kernel(sa, sys_info.sa_base, sys_info.sa_size) < 0) {

drivers/s390/cio/device_status.c

@@ -62,7 +62,7 @@ ccw_device_path_notoper(struct ccw_device *cdev)
 	stsch (sch->schid, &sch->schib);
 
 	CIO_MSG_EVENT(0, "%s(0.%x.%04x) - path(s) %02x are "
-		      "not operational \n", __FUNCTION__,
+		      "not operational \n", __func__,
 		      sch->schid.ssid, sch->schid.sch_no,
 		      sch->schib.pmcw.pnom);
 

drivers/s390/crypto/zcrypt_api.h

@@ -43,17 +43,17 @@
 #define DEV_NAME	"zcrypt"
 
 #define PRINTK(fmt, args...) \
-	printk(KERN_DEBUG DEV_NAME ": %s -> " fmt, __FUNCTION__ , ## args)
+	printk(KERN_DEBUG DEV_NAME ": %s -> " fmt, __func__ , ## args)
 #define PRINTKN(fmt, args...) \
 	printk(KERN_DEBUG DEV_NAME ": " fmt, ## args)
 #define PRINTKW(fmt, args...) \
-	printk(KERN_WARNING DEV_NAME ": %s -> " fmt, __FUNCTION__ , ## args)
+	printk(KERN_WARNING DEV_NAME ": %s -> " fmt, __func__ , ## args)
 #define PRINTKC(fmt, args...) \
-	printk(KERN_CRIT DEV_NAME ": %s -> " fmt, __FUNCTION__ , ## args)
+	printk(KERN_CRIT DEV_NAME ": %s -> " fmt, __func__ , ## args)
 
 #ifdef ZCRYPT_DEBUG
 #define PDEBUG(fmt, args...) \
-	printk(KERN_DEBUG DEV_NAME ": %s -> " fmt, __FUNCTION__ , ## args)
+	printk(KERN_DEBUG DEV_NAME ": %s -> " fmt, __func__ , ## args)
 #else
 #define PDEBUG(fmt, args...) do {} while (0)
 #endif

drivers/s390/s390mach.c

@@ -59,15 +59,15 @@ s390_collect_crw_info(void *param)
 
 			printk(KERN_WARNING"%s: Code does not support more "
 			       "than two chained crws; please report to "
-			       "linux390@de.ibm.com!\n", __FUNCTION__);
+			       "linux390@de.ibm.com!\n", __func__);
 			ccode = stcrw(&tmp_crw);
 			printk(KERN_WARNING"%s: crw reports slct=%d, oflw=%d, "
 			       "chn=%d, rsc=%X, anc=%d, erc=%X, rsid=%X\n",
-			       __FUNCTION__, tmp_crw.slct, tmp_crw.oflw,
+			       __func__, tmp_crw.slct, tmp_crw.oflw,
 			       tmp_crw.chn, tmp_crw.rsc, tmp_crw.anc,
 			       tmp_crw.erc, tmp_crw.rsid);
 			printk(KERN_WARNING"%s: This was crw number %x in the "
-			       "chain\n", __FUNCTION__, chain);
+			       "chain\n", __func__, chain);
 			if (ccode != 0)
 				break;
 			chain = tmp_crw.chn ? chain + 1 : 0;
@@ -83,7 +83,7 @@ s390_collect_crw_info(void *param)
 		       crw[chain].rsid);
 		/* Check for overflows. */
 		if (crw[chain].oflw) {
-			pr_debug("%s: crw overflow detected!\n", __FUNCTION__);
+			pr_debug("%s: crw overflow detected!\n", __func__);
 			css_schedule_eval_all();
 			chain = 0;
 			continue;

drivers/s390/scsi/zfcp_def.h

@@ -539,7 +539,7 @@ struct zfcp_rc_entry {
 
 /* logging routine for zfcp */
 #define _ZFCP_LOG(fmt, args...) \
-	printk(KERN_ERR ZFCP_NAME": %s(%d): " fmt, __FUNCTION__, \
+	printk(KERN_ERR ZFCP_NAME": %s(%d): " fmt, __func__, \
 	       __LINE__ , ##args)
 
 #define ZFCP_LOG(level, fmt, args...) \