[media] move soc_camera i2c drivers into its own dir

Move all soc_camera i2c drivers into drivers/media/i2c/soc_camera/.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/i2c/Kconfig

@@ -562,5 +562,9 @@ config VIDEO_M52790
 	 To compile this driver as a module, choose M here: the
 	 module will be called m52790.
 
+if SOC_CAMERA
+	source "drivers/media/i2c/soc_camera/Kconfig"
+endif
+
 endmenu
 endif

drivers/media/i2c/Makefile

@@ -4,6 +4,7 @@ obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o
 obj-$(CONFIG_VIDEO_SMIAPP)	+= smiapp/
 obj-$(CONFIG_VIDEO_CX25840) += cx25840/
 obj-$(CONFIG_VIDEO_M5MOLS)	+= m5mols/
+obj-y				+= soc_camera/
 
 obj-$(CONFIG_VIDEO_APTINA_PLL) += aptina-pll.o
 obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o

drivers/media/i2c/soc_camera/Kconfig

+comment "soc_camera sensor drivers"
+
+config SOC_CAMERA_IMX074
+	tristate "imx074 support"
+	depends on SOC_CAMERA && I2C
+	help
+	  This driver supports IMX074 cameras from Sony
+
+config SOC_CAMERA_MT9M001
+	tristate "mt9m001 support"
+	depends on SOC_CAMERA && I2C
+	select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
+	help
+	  This driver supports MT9M001 cameras from Micron, monochrome
+	  and colour models.
+
+config SOC_CAMERA_MT9M111
+	tristate "mt9m111, mt9m112 and mt9m131 support"
+	depends on SOC_CAMERA && I2C
+	help
+	  This driver supports MT9M111, MT9M112 and MT9M131 cameras from
+	  Micron/Aptina
+
+config SOC_CAMERA_MT9T031
+	tristate "mt9t031 support"
+	depends on SOC_CAMERA && I2C
+	help
+	  This driver supports MT9T031 cameras from Micron.
+
+config SOC_CAMERA_MT9T112
+	tristate "mt9t112 support"
+	depends on SOC_CAMERA && I2C
+	help
+	  This driver supports MT9T112 cameras from Aptina.
+
+config SOC_CAMERA_MT9V022
+	tristate "mt9v022 support"
+	depends on SOC_CAMERA && I2C
+	select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
+	help
+	  This driver supports MT9V022 cameras from Micron
+
+config SOC_CAMERA_OV2640
+	tristate "ov2640 camera support"
+	depends on SOC_CAMERA && I2C
+	help
+	  This is a ov2640 camera driver
+
+config SOC_CAMERA_OV5642
+	tristate "ov5642 camera support"
+	depends on SOC_CAMERA && I2C
+	help
+	  This is a V4L2 camera driver for the OmniVision OV5642 sensor
+
+config SOC_CAMERA_OV6650
+	tristate "ov6650 sensor support"
+	depends on SOC_CAMERA && I2C
+	---help---
+	  This is a V4L2 SoC camera driver for the OmniVision OV6650 sensor
+
+config SOC_CAMERA_OV772X
+	tristate "ov772x camera support"
+	depends on SOC_CAMERA && I2C
+	help
+	  This is a ov772x camera driver
+
+config SOC_CAMERA_OV9640
+	tristate "ov9640 camera support"
+	depends on SOC_CAMERA && I2C
+	help
+	  This is a ov9640 camera driver
+
+config SOC_CAMERA_OV9740
+	tristate "ov9740 camera support"
+	depends on SOC_CAMERA && I2C
+	help
+	  This is a ov9740 camera driver
+
+config SOC_CAMERA_RJ54N1
+	tristate "rj54n1cb0c support"
+	depends on SOC_CAMERA && I2C
+	help
+	  This is a rj54n1cb0c video driver
+
+config SOC_CAMERA_TW9910
+	tristate "tw9910 support"
+	depends on SOC_CAMERA && I2C
+	help
+	  This is a tw9910 video driver

drivers/media/i2c/soc_camera/Makefile

+obj-$(CONFIG_SOC_CAMERA_IMX074)		+= imx074.o
+obj-$(CONFIG_SOC_CAMERA_MT9M001)	+= mt9m001.o
+obj-$(CONFIG_SOC_CAMERA_MT9M111)	+= mt9m111.o
+obj-$(CONFIG_SOC_CAMERA_MT9T031)	+= mt9t031.o
+obj-$(CONFIG_SOC_CAMERA_MT9T112)	+= mt9t112.o
+obj-$(CONFIG_SOC_CAMERA_MT9V022)	+= mt9v022.o
+obj-$(CONFIG_SOC_CAMERA_OV2640)		+= ov2640.o
+obj-$(CONFIG_SOC_CAMERA_OV5642)		+= ov5642.o
+obj-$(CONFIG_SOC_CAMERA_OV6650)		+= ov6650.o
+obj-$(CONFIG_SOC_CAMERA_OV772X)		+= ov772x.o
+obj-$(CONFIG_SOC_CAMERA_OV9640)		+= ov9640.o
+obj-$(CONFIG_SOC_CAMERA_OV9740)		+= ov9740.o
+obj-$(CONFIG_SOC_CAMERA_RJ54N1)		+= rj54n1cb0c.o
+obj-$(CONFIG_SOC_CAMERA_TW9910)		+= tw9910.o

drivers/media/video/Kconfig

@@ -127,57 +127,6 @@ config SOC_CAMERA
 	  over a bus like PCI or USB. For example some i2c camera connected
 	  directly to the data bus of an SoC.
 
-config SOC_CAMERA_IMX074
-	tristate "imx074 support"
-	depends on SOC_CAMERA && I2C
-	help
-	  This driver supports IMX074 cameras from Sony
-
-config SOC_CAMERA_MT9M001
-	tristate "mt9m001 support"
-	depends on SOC_CAMERA && I2C
-	select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
-	help
-	  This driver supports MT9M001 cameras from Micron, monochrome
-	  and colour models.
-
-config SOC_CAMERA_MT9M111
-	tristate "mt9m111, mt9m112 and mt9m131 support"
-	depends on SOC_CAMERA && I2C
-	help
-	  This driver supports MT9M111, MT9M112 and MT9M131 cameras from
-	  Micron/Aptina
-
-config SOC_CAMERA_MT9T031
-	tristate "mt9t031 support"
-	depends on SOC_CAMERA && I2C
-	help
-	  This driver supports MT9T031 cameras from Micron.
-
-config SOC_CAMERA_MT9T112
-	tristate "mt9t112 support"
-	depends on SOC_CAMERA && I2C
-	help
-	  This driver supports MT9T112 cameras from Aptina.
-
-config SOC_CAMERA_MT9V022
-	tristate "mt9v022 support"
-	depends on SOC_CAMERA && I2C
-	select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
-	help
-	  This driver supports MT9V022 cameras from Micron
-
-config SOC_CAMERA_RJ54N1
-	tristate "rj54n1cb0c support"
-	depends on SOC_CAMERA && I2C
-	help
-	  This is a rj54n1cb0c video driver
-
-config SOC_CAMERA_TW9910
-	tristate "tw9910 support"
-	depends on SOC_CAMERA && I2C
-	help
-	  This is a tw9910 video driver
 
 config SOC_CAMERA_PLATFORM
 	tristate "platform camera support"
@@ -185,42 +134,6 @@ config SOC_CAMERA_PLATFORM
 	help
 	  This is a generic SoC camera platform driver, useful for testing
 
-config SOC_CAMERA_OV2640
-	tristate "ov2640 camera support"
-	depends on SOC_CAMERA && I2C
-	help
-	  This is a ov2640 camera driver
-
-config SOC_CAMERA_OV5642
-	tristate "ov5642 camera support"
-	depends on SOC_CAMERA && I2C
-	help
-	  This is a V4L2 camera driver for the OmniVision OV5642 sensor
-
-config SOC_CAMERA_OV6650
-	tristate "ov6650 sensor support"
-	depends on SOC_CAMERA && I2C
-	---help---
-	  This is a V4L2 SoC camera driver for the OmniVision OV6650 sensor
-
-config SOC_CAMERA_OV772X
-	tristate "ov772x camera support"
-	depends on SOC_CAMERA && I2C
-	help
-	  This is a ov772x camera driver
-
-config SOC_CAMERA_OV9640
-	tristate "ov9640 camera support"
-	depends on SOC_CAMERA && I2C
-	help
-	  This is a ov9640 camera driver
-
-config SOC_CAMERA_OV9740
-	tristate "ov9740 camera support"
-	depends on SOC_CAMERA && I2C
-	help
-	  This is a ov9740 camera driver
-
 config MX1_VIDEO
 	bool
 

drivers/media/video/Makefile

@@ -6,21 +6,6 @@ omap2cam-objs	:=	omap24xxcam.o omap24xxcam-dma.o
 
 obj-$(CONFIG_VIDEO_VINO) += indycam.o
 
-obj-$(CONFIG_SOC_CAMERA_IMX074)		+= imx074.o
-obj-$(CONFIG_SOC_CAMERA_MT9M001)	+= mt9m001.o
-obj-$(CONFIG_SOC_CAMERA_MT9M111)	+= mt9m111.o
-obj-$(CONFIG_SOC_CAMERA_MT9T031)	+= mt9t031.o
-obj-$(CONFIG_SOC_CAMERA_MT9T112)	+= mt9t112.o
-obj-$(CONFIG_SOC_CAMERA_MT9V022)	+= mt9v022.o
-obj-$(CONFIG_SOC_CAMERA_OV2640)		+= ov2640.o
-obj-$(CONFIG_SOC_CAMERA_OV5642)		+= ov5642.o
-obj-$(CONFIG_SOC_CAMERA_OV6650)		+= ov6650.o
-obj-$(CONFIG_SOC_CAMERA_OV772X)		+= ov772x.o
-obj-$(CONFIG_SOC_CAMERA_OV9640)		+= ov9640.o
-obj-$(CONFIG_SOC_CAMERA_OV9740)		+= ov9740.o
-obj-$(CONFIG_SOC_CAMERA_RJ54N1)		+= rj54n1cb0c.o
-obj-$(CONFIG_SOC_CAMERA_TW9910)		+= tw9910.o
-
 obj-$(CONFIG_VIDEO_VINO) += vino.o
 obj-$(CONFIG_VIDEO_TIMBERDALE)	+= timblogiw.o
 
@@ -78,3 +63,4 @@ obj-$(CONFIG_ARCH_OMAP)	+= omap/
 ccflags-y += -I$(srctree)/drivers/media/dvb-core
 ccflags-y += -I$(srctree)/drivers/media/dvb-frontends
 ccflags-y += -I$(srctree)/drivers/media/tuners
+ccflags-y += -I$(srctree)/drivers/media/i2c/soc_camera