Merge tag 'regulator-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A few fixes for the regulator subsystems, a few driver specific things
  plus a fix for the interaction between regultor_can_change_voltage()
  and continuous voltage ranges both of which were added for this
  release."

* tag 'regulator-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: max8998: Ensure enough delay time for max8998_set_voltage_buck_time_sel
  regulator: max8998: Use uV in voltage_map_desc
  regulator: max8997: Use uV in voltage_map_desc
  regulator: core: Fix comment for regulator_register()
  regulator: core: Fix continuous_voltage_range case in regulator_can_change_voltage
  regulator: s5m8767: Fix probe failure due to stack corruption

drivers/regulator/core.c

@@ -1885,9 +1885,15 @@ int regulator_can_change_voltage(struct regulator *regulator)
 	struct regulator_dev	*rdev = regulator->rdev;
 
 	if (rdev->constraints &&
-	    rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE &&
-	    (rdev->desc->n_voltages - rdev->desc->linear_min_sel) > 1)
-		return 1;
+	    (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
+		if (rdev->desc->n_voltages - rdev->desc->linear_min_sel > 1)
+			return 1;
+
+		if (rdev->desc->continuous_voltage_range &&
+		    rdev->constraints->min_uV && rdev->constraints->max_uV &&
+		    rdev->constraints->min_uV != rdev->constraints->max_uV)
+			return 1;
+	}
 
 	return 0;
 }
@@ -3315,7 +3321,8 @@ static void rdev_init_debugfs(struct regulator_dev *rdev)
  * @config: runtime configuration for regulator
  *
  * Called by regulator drivers to register a regulator.
- * Returns 0 on success.
+ * Returns a valid pointer to struct regulator_dev on success
+ * or an ERR_PTR() on error.
  */
 struct regulator_dev *
 regulator_register(const struct regulator_desc *regulator_desc,

drivers/regulator/max8997.c

@@ -71,26 +71,26 @@ struct voltage_map_desc {
 	int step;
 };
 
-/* Voltage maps in mV */
+/* Voltage maps in uV */
 static const struct voltage_map_desc ldo_voltage_map_desc = {
-	.min = 800,	.max = 3950,	.step = 50,
+	.min = 800000,	.max = 3950000,	.step = 50000,
 }; /* LDO1 ~ 18, 21 all */
 
 static const struct voltage_map_desc buck1245_voltage_map_desc = {
-	.min = 650,	.max = 2225,	.step = 25,
+	.min = 650000,	.max = 2225000,	.step = 25000,
 }; /* Buck1, 2, 4, 5 */
 
 static const struct voltage_map_desc buck37_voltage_map_desc = {
-	.min = 750,	.max = 3900,	.step = 50,
+	.min = 750000,	.max = 3900000,	.step = 50000,
 }; /* Buck3, 7 */
 
-/* current map in mA */
+/* current map in uA */
 static const struct voltage_map_desc charger_current_map_desc = {
-	.min = 200,	.max = 950,	.step = 50,
+	.min = 200000,	.max = 950000,	.step = 50000,
 };
 
 static const struct voltage_map_desc topoff_current_map_desc = {
-	.min = 50,	.max = 200,	.step = 10,
+	.min = 50000,	.max = 200000,	.step = 10000,
 };
 
 static const struct voltage_map_desc *reg_voltage_map[] = {
@@ -194,7 +194,7 @@ static int max8997_list_voltage(struct regulator_dev *rdev,
 	if (val > desc->max)
 		return -EINVAL;
 
-	return val * 1000;
+	return val;
 }
 
 static int max8997_get_enable_register(struct regulator_dev *rdev,
@@ -485,7 +485,6 @@ static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev,
 {
 	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
 	struct i2c_client *i2c = max8997->iodev->i2c;
-	int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
 	const struct voltage_map_desc *desc;
 	int rid = rdev_get_id(rdev);
 	int i, reg, shift, mask, ret;
@@ -509,7 +508,7 @@ static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev,
 
 	desc = reg_voltage_map[rid];
 
-	i = max8997_get_voltage_proper_val(desc, min_vol, max_vol);
+	i = max8997_get_voltage_proper_val(desc, min_uV, max_uV);
 	if (i < 0)
 		return i;
 
@@ -557,7 +556,7 @@ static int max8997_set_voltage_ldobuck_time_sel(struct regulator_dev *rdev,
 	case MAX8997_BUCK4:
 	case MAX8997_BUCK5:
 		return DIV_ROUND_UP(desc->step * (new_selector - old_selector),
-				    max8997->ramp_delay);
+				    max8997->ramp_delay * 1000);
 	}
 
 	return 0;
@@ -656,7 +655,6 @@ static int max8997_set_voltage_buck(struct regulator_dev *rdev,
 	const struct voltage_map_desc *desc;
 	int new_val, new_idx, damage, tmp_val, tmp_idx, tmp_dmg;
 	bool gpio_dvs_mode = false;
-	int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
 
 	if (rid < MAX8997_BUCK1 || rid > MAX8997_BUCK7)
 		return -EINVAL;
@@ -681,7 +679,7 @@ static int max8997_set_voltage_buck(struct regulator_dev *rdev,
 						selector);
 
 	desc = reg_voltage_map[rid];
-	new_val = max8997_get_voltage_proper_val(desc, min_vol, max_vol);
+	new_val = max8997_get_voltage_proper_val(desc, min_uV, max_uV);
 	if (new_val < 0)
 		return new_val;
 
@@ -1123,8 +1121,8 @@ static int max8997_pmic_probe(struct platform_device *pdev)
 		max8997->buck1_vol[i] = ret =
 			max8997_get_voltage_proper_val(
 					&buck1245_voltage_map_desc,
-					pdata->buck1_voltage[i] / 1000,
-					pdata->buck1_voltage[i] / 1000 +
+					pdata->buck1_voltage[i],
+					pdata->buck1_voltage[i] +
 					buck1245_voltage_map_desc.step);
 		if (ret < 0)
 			goto err_out;
@@ -1132,8 +1130,8 @@ static int max8997_pmic_probe(struct platform_device *pdev)
 		max8997->buck2_vol[i] = ret =
 			max8997_get_voltage_proper_val(
 					&buck1245_voltage_map_desc,
-					pdata->buck2_voltage[i] / 1000,
-					pdata->buck2_voltage[i] / 1000 +
+					pdata->buck2_voltage[i],
+					pdata->buck2_voltage[i] +
 					buck1245_voltage_map_desc.step);
 		if (ret < 0)
 			goto err_out;
@@ -1141,8 +1139,8 @@ static int max8997_pmic_probe(struct platform_device *pdev)
 		max8997->buck5_vol[i] = ret =
 			max8997_get_voltage_proper_val(
 					&buck1245_voltage_map_desc,
-					pdata->buck5_voltage[i] / 1000,
-					pdata->buck5_voltage[i] / 1000 +
+					pdata->buck5_voltage[i],
+					pdata->buck5_voltage[i] +
 					buck1245_voltage_map_desc.step);
 		if (ret < 0)
 			goto err_out;

drivers/regulator/max8998.c

@@ -51,39 +51,39 @@ struct voltage_map_desc {
 	int step;
 };
 
-/* Voltage maps */
+/* Voltage maps in uV*/
 static const struct voltage_map_desc ldo23_voltage_map_desc = {
-	.min = 800,	.step = 50,	.max = 1300,
+	.min = 800000,	.step = 50000,	.max = 1300000,
 };
 static const struct voltage_map_desc ldo456711_voltage_map_desc = {
-	.min = 1600,	.step = 100,	.max = 3600,
+	.min = 1600000,	.step = 100000,	.max = 3600000,
 };
 static const struct voltage_map_desc ldo8_voltage_map_desc = {
-	.min = 3000,	.step = 100,	.max = 3600,
+	.min = 3000000,	.step = 100000,	.max = 3600000,
 };
 static const struct voltage_map_desc ldo9_voltage_map_desc = {
-	.min = 2800,	.step = 100,	.max = 3100,
+	.min = 2800000,	.step = 100000,	.max = 3100000,
 };
 static const struct voltage_map_desc ldo10_voltage_map_desc = {
-	.min = 950,	.step = 50,	.max = 1300,
+	.min = 95000,	.step = 50000,	.max = 1300000,
 };
 static const struct voltage_map_desc ldo1213_voltage_map_desc = {
-	.min = 800,	.step = 100,	.max = 3300,
+	.min = 800000,	.step = 100000,	.max = 3300000,
 };
 static const struct voltage_map_desc ldo1415_voltage_map_desc = {
-	.min = 1200,	.step = 100,	.max = 3300,
+	.min = 1200000,	.step = 100000,	.max = 3300000,
 };
 static const struct voltage_map_desc ldo1617_voltage_map_desc = {
-	.min = 1600,	.step = 100,	.max = 3600,
+	.min = 1600000,	.step = 100000,	.max = 3600000,
 };
 static const struct voltage_map_desc buck12_voltage_map_desc = {
-	.min = 750,	.step = 25,	.max = 1525,
+	.min = 750000,	.step = 25000,	.max = 1525000,
 };
 static const struct voltage_map_desc buck3_voltage_map_desc = {
-	.min = 1600,	.step = 100,	.max = 3600,
+	.min = 1600000,	.step = 100000,	.max = 3600000,
 };
 static const struct voltage_map_desc buck4_voltage_map_desc = {
-	.min = 800,	.step = 100,	.max = 2300,
+	.min = 800000,	.step = 100000,	.max = 2300000,
 };
 
 static const struct voltage_map_desc *ldo_voltage_map[] = {
@@ -445,9 +445,9 @@ static int max8998_set_voltage_buck_time_sel(struct regulator_dev *rdev,
 	if (max8998->iodev->type == TYPE_MAX8998 && !(val & MAX8998_ENRAMP))
 		return 0;
 
-	difference = (new_selector - old_selector) * desc->step;
+	difference = (new_selector - old_selector) * desc->step / 1000;
 	if (difference > 0)
-		return difference / ((val & 0x0f) + 1);
+		return DIV_ROUND_UP(difference, (val & 0x0f) + 1);
 
 	return 0;
 }
@@ -702,7 +702,7 @@ static int max8998_pmic_probe(struct platform_device *pdev)
 		i = 0;
 		while (buck12_voltage_map_desc.min +
 		       buck12_voltage_map_desc.step*i
-		       < (pdata->buck1_voltage1 / 1000))
+		       < pdata->buck1_voltage1)
 			i++;
 		max8998->buck1_vol[0] = i;
 		ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE1, i);
@@ -713,7 +713,7 @@ static int max8998_pmic_probe(struct platform_device *pdev)
 		i = 0;
 		while (buck12_voltage_map_desc.min +
 		       buck12_voltage_map_desc.step*i
-		       < (pdata->buck1_voltage2 / 1000))
+		       < pdata->buck1_voltage2)
 			i++;
 
 		max8998->buck1_vol[1] = i;
@@ -725,7 +725,7 @@ static int max8998_pmic_probe(struct platform_device *pdev)
 		i = 0;
 		while (buck12_voltage_map_desc.min +
 		       buck12_voltage_map_desc.step*i
-		       < (pdata->buck1_voltage3 / 1000))
+		       < pdata->buck1_voltage3)
 			i++;
 
 		max8998->buck1_vol[2] = i;
@@ -737,7 +737,7 @@ static int max8998_pmic_probe(struct platform_device *pdev)
 		i = 0;
 		while (buck12_voltage_map_desc.min +
 		       buck12_voltage_map_desc.step*i
-		       < (pdata->buck1_voltage4 / 1000))
+		       < pdata->buck1_voltage4)
 			i++;
 
 		max8998->buck1_vol[3] = i;
@@ -763,7 +763,7 @@ static int max8998_pmic_probe(struct platform_device *pdev)
 		i = 0;
 		while (buck12_voltage_map_desc.min +
 		       buck12_voltage_map_desc.step*i
-		       < (pdata->buck2_voltage1 / 1000))
+		       < pdata->buck2_voltage1)
 			i++;
 		max8998->buck2_vol[0] = i;
 		ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE1, i);
@@ -774,7 +774,7 @@ static int max8998_pmic_probe(struct platform_device *pdev)
 		i = 0;
 		while (buck12_voltage_map_desc.min +
 		       buck12_voltage_map_desc.step*i
-		       < (pdata->buck2_voltage2 / 1000))
+		       < pdata->buck2_voltage2)
 			i++;
 		max8998->buck2_vol[1] = i;
 		ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE2, i);
@@ -792,8 +792,8 @@ static int max8998_pmic_probe(struct platform_device *pdev)
 			int count = (desc->max - desc->min) / desc->step + 1;
 
 			regulators[index].n_voltages = count;
-			regulators[index].min_uV = desc->min * 1000;
-			regulators[index].uV_step = desc->step * 1000;
+			regulators[index].min_uV = desc->min;
+			regulators[index].uV_step = desc->step;
 		}
 
 		config.dev = max8998->dev;

drivers/regulator/s5m8767.c

@@ -214,7 +214,7 @@ static int s5m8767_reg_is_enabled(struct regulator_dev *rdev)
 	struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
 	int ret, reg;
 	int mask = 0xc0, enable_ctrl;
-	u8 val;
+	unsigned int val;
 
 	ret = s5m8767_get_register(rdev, &reg, &enable_ctrl);
 	if (ret == -EINVAL)
@@ -306,7 +306,7 @@ static int s5m8767_get_voltage_sel(struct regulator_dev *rdev)
 	struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
 	int reg, mask, ret;
 	int reg_id = rdev_get_id(rdev);
-	u8 val;
+	unsigned int val;
 
 	ret = s5m8767_get_voltage_register(rdev, &reg);
 	if (ret)