Commit 2b0f11df authored by Felipe Balbi's avatar Felipe Balbi

usb: dwc3: gadget: clear SUSPHY bit before ep cmds

Synopsys Databook 2.60a has a note that if we're
sending an endpoint command we _must_ make sure that
DWC3_GUSB2PHY(n).SUSPHY bit is cleared.

This patch implements that particular detail.
Signed-off-by: default avatarFelipe Balbi <felipe.balbi@linux.intel.com>
parent c0ca324d
...@@ -227,10 +227,27 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep, ...@@ -227,10 +227,27 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
struct dwc3_ep *dep = dwc->eps[ep]; struct dwc3_ep *dep = dwc->eps[ep];
u32 timeout = 500; u32 timeout = 500;
u32 reg; u32 reg;
int susphy = false;
int ret = -EINVAL; int ret = -EINVAL;
trace_dwc3_gadget_ep_cmd(dep, cmd, params); trace_dwc3_gadget_ep_cmd(dep, cmd, params);
/*
* Synopsys Databook 2.60a states, on section 6.3.2.5.[1-8], that if
* we're issuing an endpoint command, we must check if
* GUSB2PHYCFG.SUSPHY bit is set. If it is, then we need to clear it.
*
* We will also set SUSPHY bit to what it was before returning as stated
* by the same section on Synopsys databook.
*/
reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
if (unlikely(reg & DWC3_GUSB2PHYCFG_SUSPHY)) {
susphy = true;
reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
}
dwc3_writel(dwc->regs, DWC3_DEPCMDPAR0(ep), params->param0); dwc3_writel(dwc->regs, DWC3_DEPCMDPAR0(ep), params->param0);
dwc3_writel(dwc->regs, DWC3_DEPCMDPAR1(ep), params->param1); dwc3_writel(dwc->regs, DWC3_DEPCMDPAR1(ep), params->param1);
dwc3_writel(dwc->regs, DWC3_DEPCMDPAR2(ep), params->param2); dwc3_writel(dwc->regs, DWC3_DEPCMDPAR2(ep), params->param2);
...@@ -263,6 +280,12 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep, ...@@ -263,6 +280,12 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
udelay(1); udelay(1);
} while (1); } while (1);
if (unlikely(susphy)) {
reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
reg |= DWC3_GUSB2PHYCFG_SUSPHY;
dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
}
return ret; return ret;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment