Commit 2bbb5d66 authored by Mark Brown's avatar Mark Brown

ASoC: Trace Wolfson jack detection IRQs

Add jack detection interrupt trace to Wolfson CODEC drivers.
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: default avatarLiam Girdwood <lrg@slimlogic.co.uk>
parent 6d3c26bc
...@@ -26,6 +26,7 @@ ...@@ -26,6 +26,7 @@
#include <sound/soc.h> #include <sound/soc.h>
#include <sound/initval.h> #include <sound/initval.h>
#include <sound/tlv.h> #include <sound/tlv.h>
#include <trace/events/asoc.h>
#include "wm8350.h" #include "wm8350.h"
...@@ -1378,10 +1379,12 @@ static irqreturn_t wm8350_hp_jack_handler(int irq, void *data) ...@@ -1378,10 +1379,12 @@ static irqreturn_t wm8350_hp_jack_handler(int irq, void *data)
switch (irq - wm8350->irq_base) { switch (irq - wm8350->irq_base) {
case WM8350_IRQ_CODEC_JCK_DET_L: case WM8350_IRQ_CODEC_JCK_DET_L:
trace_snd_soc_jack_irq("WM8350 HPL");
jack = &priv->hpl; jack = &priv->hpl;
break; break;
case WM8350_IRQ_CODEC_JCK_DET_R: case WM8350_IRQ_CODEC_JCK_DET_R:
trace_snd_soc_jack_irq("WM8350 HPR");
jack = &priv->hpr; jack = &priv->hpr;
break; break;
...@@ -1456,6 +1459,8 @@ static irqreturn_t wm8350_mic_handler(int irq, void *data) ...@@ -1456,6 +1459,8 @@ static irqreturn_t wm8350_mic_handler(int irq, void *data)
u16 reg; u16 reg;
int report = 0; int report = 0;
trace_snd_soc_jack_irq("WM8350 mic");
reg = wm8350_reg_read(wm8350, WM8350_JACK_PIN_STATUS); reg = wm8350_reg_read(wm8350, WM8350_JACK_PIN_STATUS);
if (reg & WM8350_JACK_MICSCD_LVL) if (reg & WM8350_JACK_MICSCD_LVL)
report |= priv->mic.short_report; report |= priv->mic.short_report;
......
...@@ -31,6 +31,7 @@ ...@@ -31,6 +31,7 @@
#include <sound/soc.h> #include <sound/soc.h>
#include <sound/initval.h> #include <sound/initval.h>
#include <sound/wm8903.h> #include <sound/wm8903.h>
#include <trace/events/asoc.h>
#include "wm8903.h" #include "wm8903.h"
...@@ -1533,6 +1534,9 @@ static irqreturn_t wm8903_irq(int irq, void *data) ...@@ -1533,6 +1534,9 @@ static irqreturn_t wm8903_irq(int irq, void *data)
mic_report = wm8903->mic_last_report; mic_report = wm8903->mic_last_report;
int_pol = snd_soc_read(codec, WM8903_INTERRUPT_POLARITY_1); int_pol = snd_soc_read(codec, WM8903_INTERRUPT_POLARITY_1);
if (int_val & (WM8903_MICSHRT_EINT | WM8903_MICDET_EINT))
trace_snd_soc_jack_irq(dev_name(codec->dev));
if (int_val & WM8903_MICSHRT_EINT) { if (int_val & WM8903_MICSHRT_EINT) {
dev_dbg(codec->dev, "Microphone short (pol=%x)\n", int_pol); dev_dbg(codec->dev, "Microphone short (pol=%x)\n", int_pol);
......
...@@ -32,6 +32,7 @@ ...@@ -32,6 +32,7 @@
#include <sound/initval.h> #include <sound/initval.h>
#include <sound/tlv.h> #include <sound/tlv.h>
#include <sound/wm8962.h> #include <sound/wm8962.h>
#include <trace/events/asoc.h>
#include "wm8962.h" #include "wm8962.h"
...@@ -3353,6 +3354,8 @@ static irqreturn_t wm8962_irq(int irq, void *data) ...@@ -3353,6 +3354,8 @@ static irqreturn_t wm8962_irq(int irq, void *data)
if (active & (WM8962_MICSCD_EINT | WM8962_MICD_EINT)) { if (active & (WM8962_MICSCD_EINT | WM8962_MICD_EINT)) {
dev_dbg(codec->dev, "Microphone event detected\n"); dev_dbg(codec->dev, "Microphone event detected\n");
trace_snd_soc_jack_irq(dev_name(codec->dev));
pm_wakeup_event(codec->dev, 300); pm_wakeup_event(codec->dev, 300);
schedule_delayed_work(&wm8962->mic_work, schedule_delayed_work(&wm8962->mic_work,
......
...@@ -28,6 +28,7 @@ ...@@ -28,6 +28,7 @@
#include <sound/soc.h> #include <sound/soc.h>
#include <sound/initval.h> #include <sound/initval.h>
#include <sound/tlv.h> #include <sound/tlv.h>
#include <trace/events/asoc.h>
#include <linux/mfd/wm8994/core.h> #include <linux/mfd/wm8994/core.h>
#include <linux/mfd/wm8994/registers.h> #include <linux/mfd/wm8994/registers.h>
...@@ -2755,6 +2756,8 @@ static irqreturn_t wm8994_mic_irq(int irq, void *data) ...@@ -2755,6 +2756,8 @@ static irqreturn_t wm8994_mic_irq(int irq, void *data)
int reg; int reg;
int report; int report;
trace_snd_soc_jack_irq(dev_name(codec->dev));
reg = snd_soc_read(codec, WM8994_INTERRUPT_RAW_STATUS_2); reg = snd_soc_read(codec, WM8994_INTERRUPT_RAW_STATUS_2);
if (reg < 0) { if (reg < 0) {
dev_err(codec->dev, "Failed to read microphone status: %d\n", dev_err(codec->dev, "Failed to read microphone status: %d\n",
...@@ -2901,6 +2904,8 @@ static irqreturn_t wm8958_mic_irq(int irq, void *data) ...@@ -2901,6 +2904,8 @@ static irqreturn_t wm8958_mic_irq(int irq, void *data)
goto out; goto out;
} }
trace_snd_soc_jack_irq(dev_name(codec->dev));
if (wm8994->jack_cb) if (wm8994->jack_cb)
wm8994->jack_cb(reg, wm8994->jack_cb_data); wm8994->jack_cb(reg, wm8994->jack_cb_data);
else else
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment