Commit 2bbd5023 authored by Ian Abbott's avatar Ian Abbott Committed by Greg Kroah-Hartman

staging: comedi: amplc_pci224: convert CLK_CONFIG() macro to function

Convert the `CLK_CLKFIG(chan, src)` macro to a static function
`pci224_clk_config(chan, src)`.  This is consistent with an earlier
change to convert `GAT_CONFIG(chan, src)` to a static function.
Signed-off-by: default avatarIan Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent a19aa380
......@@ -206,8 +206,11 @@
#define CLK_1KHZ 5 /* internal 1 kHz clock */
#define CLK_OUTNM1 6 /* output of channel-1 modulo total */
#define CLK_EXT 7 /* external clock */
/* Macro to construct clock input configuration register value. */
#define CLK_CONFIG(chan, src) ((((chan) & 3) << 3) | ((src) & 7))
static unsigned int pci224_clk_config(unsigned int chan, unsigned int src)
{
return ((chan & 3) << 3) | (src & 7);
}
/*
* Counter/timer gate input configuration sources.
......@@ -825,9 +828,11 @@ static void pci224_ao_start_pacer(struct comedi_device *dev,
/* Make sure Z2-2 is gated on. */
outb(pci224_gat_config(2, GAT_VCC), devpriv->iobase1 + PCI224_ZGAT_SCE);
/* Z2-2 needs 10 MHz clock. */
outb(CLK_CONFIG(2, CLK_10MHZ), devpriv->iobase1 + PCI224_ZCLK_SCE);
outb(pci224_clk_config(2, CLK_10MHZ),
devpriv->iobase1 + PCI224_ZCLK_SCE);
/* Z2-0 is clocked from Z2-2's output. */
outb(CLK_CONFIG(0, CLK_OUTNM1), devpriv->iobase1 + PCI224_ZCLK_SCE);
outb(pci224_clk_config(0, CLK_OUTNM1),
devpriv->iobase1 + PCI224_ZCLK_SCE);
comedi_8254_pacer_enable(dev->pacer, 2, 0, false);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment