ARM: S3C24XX: Move device setup files to mach directory

Includes a small rename of the SETUP_TS option to a S3C24XX prefix.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

arch/arm/mach-s3c24xx/Kconfig

@@ -106,6 +106,11 @@ config S3C24XX_SIMTEC_USB
 	help
 	  USB management code for common Simtec S3C24XX boards
 
+config S3C24XX_SETUP_TS
+	bool
+	help
+	  Compile in platform device definition for Samsung TouchScreen.
+
 # cpu-specific sections
 
 if CPU_S3C2410
@@ -178,7 +183,7 @@ config ARCH_H1940
 	select PM_H1940 if PM
 	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
-	select S3C2410_SETUP_TS
+	select S3C24XX_SETUP_TS
 	help
 	  Say Y here if you are using the HP IPAQ H1940
 

arch/arm/mach-s3c24xx/Makefile

@@ -91,3 +91,5 @@ obj-$(CONFIG_MACH_OSIRIS_DVS)		+= mach-osiris-dvs.o
 # device setup
 
 obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
+obj-$(CONFIG_ARCH_S3C24XX)		+= setup-i2c.o
+obj-$(CONFIG_S3C24XX_SETUP_TS)		+= setup-ts.o

arch/arm/plat-s3c24xx/Kconfig

@@ -113,9 +113,4 @@ config S3C2412_IOTIMING
 	  Intel node to select io timing code that is common to the s3c2412
 	  and the s3c2443.
 
-config S3C2410_SETUP_TS
-	bool
-	help
-	  Compile in platform device definition for Samsung TouchScreen.
-
 endif

arch/arm/plat-s3c24xx/Makefile

@@ -31,7 +31,3 @@ obj-$(CONFIG_S3C24XX_DMA)	+= dma.o
 obj-$(CONFIG_S3C2410_IOTIMING)	+= s3c2410-iotiming.o
 obj-$(CONFIG_S3C2412_IOTIMING)	+= s3c2412-iotiming.o
 obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
-
-# device specific setup and/or initialisation
-obj-$(CONFIG_ARCH_S3C24XX)	+= setup-i2c.o
-obj-$(CONFIG_S3C2410_SETUP_TS)	+= setup-ts.o