Commit 2c970788 authored by David Brownell's avatar David Brownell Committed by Greg Kroah-Hartman

[PATCH] USB: usbnet minor cleanup

This goes on top of Dave Hollis' patch, and makes the front matter
match the slightly revised role -- and mention that new support.
It also eliminates a potentially confusing name and corrects an
omission (Zaurus framing wasn't printed).
parent 9b35d410
/*
* USB Host-to-Host Links
* Copyright (C) 2000-2002 by David Brownell <dbrownell@users.sourceforge.net>
* USB Networking Links
* Copyright (C) 2000-2003 by David Brownell <dbrownell@users.sourceforge.net>
* Copyright (C) 2002 Pavel Machek <pavel@ucw.cz>
* Copyright (C) 2003 David Hollis <dhollis@davehollis.com>
* Copyright (c) 2002-2003 TiVo Inc.
......@@ -21,63 +21,38 @@
*/
/*
* This is used for "USB networking", connecting USB hosts as peers.
*
* It can be used with USB "network cables", for IP-over-USB communications;
* Ethernet speeds without the Ethernet. USB devices (including some PDAs)
* can support such links directly, replacing device-specific protocols
* with Internet standard ones.
*
* The links can be bridged using the Ethernet bridging (net/bridge)
* support as appropriate. Devices currently supported include:
* This is a generic "USB networking" framework that works with several
* kinds of full and high speed networking devices:
*
* + USB host-to-host "network cables", used for IP-over-USB links.
* These are often used for Laplink style connectivity products.
* - AnchorChip 2720
* - Belkin, eTEK (interops with Win32 drivers)
* - EPSON USB clients
* - GeneSys GL620USB-A
* - NetChip 1080 (interoperates with NetChip Win32 drivers)
* - Prolific PL-2301/2302 (replaces "plusb" driver)
* - PXA-250 or SA-1100 Linux PDAs like iPaq, Yopy, and Zaurus
*
* USB devices can implement their side of this protocol at the cost
* of two bulk endpoints; it's not restricted to "cable" applications.
* See the SA1110, Zaurus, or EPSON device/client support in this driver;
* slave/target drivers such as "usb-eth" (on most SA-1100 PDAs) are
* used inside USB slave/target devices.
*
*
* Status:
*
* - AN2720 ... not widely available, but reportedly works well
*
* - Belkin/eTEK ... no known issues
* + Smart USB devices can support such links directly, using Internet
* standard protocols instead of proprietary host-to-device links.
* - Linux PDAs like iPaq, Yopy, and Zaurus
* - The BLOB boot loader (for diskless booting)
* - Linux "gadgets", perhaps using PXA-2xx or Net2280 controllers
* - Devices using EPSON's sample USB firmware
* - CDC-Ethernet class devices, such as many cable modems
*
* - Both GeneSys and PL-230x use interrupt transfers for driver-to-driver
* handshaking; it'd be worth implementing those as "carrier detect".
* Prefer generic hooks, not minidriver-specific hacks.
* + Adapters to networks such as Ethernet.
* - AX8817X based USB 2.0 products
*
* - For Netchip, should use keventd to poll via control requests to detect
* hardware level "carrier detect".
* Links to these devices can be bridged using Linux Ethernet bridging.
* With minor exceptions, these all use similar USB framing for network
* traffic, but need different protocols for control traffic.
*
* - PL-230x ... the initialization protocol doesn't seem to match chip data
* sheets, sometimes it's not needed and sometimes it hangs. Prolific has
* not responded to repeated support/information requests.
*
* - SA-1100 PDAs ... the standard ARM Linux SA-1100 support works nicely,
* as found in www.handhelds.org and other kernels. The Sharp/Lineo
* kernels use different drivers, which also talk to this code.
*
* Interop with more Win32 drivers may be a good thing.
*
* Seems like reporting "peer connected" (carrier present) events may end
* up going through the netlink event system, not hotplug ... so new links
* would likely be handled with a link monitoring thread in some daemon.
*
* There are reports that bridging gives lower-than-usual throughput.
*
* Need smarter hotplug policy scripts ... ones that know how to arrange
* bridging with "brctl", and can handle static and dynamic ("pump") setups.
* Use those eventual "peer connected" events, and zeroconf.
* USB devices can implement their side of this protocol at the cost
* of two bulk endpoints; it's not restricted to "cable" applications.
* See the SA1110, Zaurus, or EPSON device/client support in this driver;
* slave/target drivers such as "usb-eth" (on most SA-1100 PDAs) or
* "g_ether" (in the Linux "gadget" framework) implement that behavior
* within devices.
*
*
* CHANGELOG:
......@@ -128,6 +103,7 @@
* vs pxa25x, and CDC Ethernet. Throttle down log floods on
* disconnect; other cleanups. (db) Flush net1080 fifos
* after several sequential framing errors. (Johannes Erdfelt)
* 22-aug-2003 AX8817X support (Dave Hollis).
*
*-------------------------------------------------------------------------*/
......@@ -141,16 +117,10 @@
#include <linux/random.h>
#include <linux/ethtool.h>
#include <linux/workqueue.h>
#include <linux/mii.h>
#include <asm/uaccess.h>
#include <asm/unaligned.h>
#ifdef CONFIG_USB_AX8817X
#define NEED_MII
#endif
#ifdef NEED_MII
#include <linux/mii.h>
#endif
// #define DEBUG // error path messages, extra info
// #define VERBOSE // more; success messages
......@@ -167,7 +137,7 @@
#include <linux/dma-mapping.h>
#define DRIVER_VERSION "25-Apr-2003"
#define DRIVER_VERSION "25-Aug-2003"
/*-------------------------------------------------------------------------*/
......@@ -228,9 +198,7 @@ struct usbnet {
int msg_level;
unsigned long data [5];
#ifdef NEED_MII
struct mii_if_info mii;
#endif
// various kinds of pending driver work
struct sk_buff_head rxq;
......@@ -415,6 +383,7 @@ static const struct driver_info an2720_info = {
#ifdef CONFIG_USB_AX8817X
#define NEED_MII
/* ASIX AX8817X based USB 2.0 Ethernet Devices */
#define HAVE_HARDWARE
......@@ -752,7 +721,7 @@ struct ether_desc {
u8 bNumberPowerFilters;
} __attribute__ ((packed));
struct cdc_info {
struct cdc_state {
struct header_desc *header;
struct union_desc *u;
struct ether_desc *ether;
......@@ -795,7 +764,7 @@ static int cdc_bind (struct usbnet *dev, struct usb_interface *intf)
u8 *buf = intf->altsetting->extra;
int len = intf->altsetting->extralen;
struct usb_interface_descriptor *d;
struct cdc_info *info = (void *) &dev->data;
struct cdc_state *info = (void *) &dev->data;
int status;
if (sizeof dev->data < sizeof *info)
......@@ -906,7 +875,7 @@ static int cdc_bind (struct usbnet *dev, struct usb_interface *intf)
static void cdc_unbind (struct usbnet *dev, struct usb_interface *intf)
{
struct cdc_info *info = (void *) &dev->data;
struct cdc_state *info = (void *) &dev->data;
/* disconnect master --> disconnect slave */
if (intf == info->control && info->data) {
......@@ -2373,16 +2342,23 @@ static int usbnet_open (struct net_device *net)
}
netif_start_queue (net);
if (dev->msg_level >= 2)
if (dev->msg_level >= 2) {
char *framing;
if (dev->driver_info->flags & FLAG_FRAMING_NC)
framing = "NetChip";
else if (dev->driver_info->flags & FLAG_FRAMING_GL)
framing = "GeneSys";
else if (dev->driver_info->flags & FLAG_FRAMING_Z)
framing = "Zaurus";
else
framing = "simple";
devinfo (dev, "open: enable queueing "
"(rx %d, tx %d) mtu %d %s framing",
RX_QLEN (dev), TX_QLEN (dev), dev->net->mtu,
(info->flags & (FLAG_FRAMING_NC | FLAG_FRAMING_GL))
? ((info->flags & FLAG_FRAMING_NC)
? "NetChip"
: "GeneSys")
: "raw"
);
framing);
}
// delay posting reads until we're fully open
tasklet_schedule (&dev->bh);
......@@ -2462,7 +2438,9 @@ static int usbnet_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
struct usbnet *dev = (struct usbnet *)net->priv;
if (dev->mii.mdio_read != NULL && dev->mii.mdio_write != NULL)
return generic_mii_ioctl(&dev->mii, (struct mii_ioctl_data *) &rq->ifr_data, cmd, NULL);
return generic_mii_ioctl(&dev->mii,
(struct mii_ioctl_data *) &rq->ifr_data,
cmd, NULL);
#endif
return -EOPNOTSUPP;
}
......@@ -3144,9 +3122,13 @@ static struct usb_driver usbnet_driver = {
static int __init usbnet_init (void)
{
// compiler should optimize this out
if (sizeof (((struct sk_buff *)0)->cb) < sizeof (struct skb_data))
BUG ();
// compiler should optimize these out
BUG_ON (sizeof (((struct sk_buff *)0)->cb)
< sizeof (struct skb_data));
#ifdef CONFIG_USB_CDCETHER
BUG_ON ((sizeof (((struct usbnet *)0)->data)
< sizeof (struct cdc_state)));
#endif
get_random_bytes (node_id, sizeof node_id);
node_id [0] &= 0xfe; // clear multicast bit
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment