arm: dts: qcom: Add generic PMIC gpio/MPP compat strings

Add the generic compatible strings for the PMIC gpio and MPP
modules found on qcom based PMICs.

Cc: <devicetree@vger.kernel.org>
Cc: "Ivan T. Ivanov" <iivanov@mm-sol.com>
Cc: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Andy Gross <agross@codeaurora.org>

arch/arm/boot/dts/qcom-apq8064.dtsi

@@ -410,7 +410,8 @@ pmicintc: pmic@0 {
 
 				pm8921_gpio: gpio@150 {
 
-					compatible = "qcom,pm8921-gpio";
+					compatible = "qcom,pm8921-gpio",
+						     "qcom,ssbi-gpio";
 					reg = <0x150>;
 					interrupts = <192 1>, <193 1>, <194 1>,
 						     <195 1>, <196 1>, <197 1>,
@@ -434,7 +435,8 @@ pm8921_gpio: gpio@150 {
 				};
 
 				pm8921_mpps: mpps@50 {
-					compatible = "qcom,pm8921-mpp";
+					compatible = "qcom,pm8921-mpp",
+						     "qcom,ssbi-mpp";
 					reg = <0x50>;
 					gpio-controller;
 					#gpio-cells = <2>;

arch/arm/boot/dts/qcom-pm8841.dtsi

@@ -10,7 +10,7 @@ pm8841_0: pm8841@4 {
 		#size-cells = <0>;
 
 		pm8841_mpps: mpps@a000 {
-			compatible = "qcom,pm8841-mpp";
+			compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
 			reg = <0xa000 0x400>;
 			gpio-controller;
 			#gpio-cells = <2>;

arch/arm/boot/dts/qcom-pm8941.dtsi

@@ -48,7 +48,7 @@ charger@1000 {
 		};
 
 		pm8941_gpios: gpios@c000 {
-			compatible = "qcom,pm8941-gpio";
+			compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio";
 			reg = <0xc000 0x2400>;
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -91,7 +91,7 @@ pm8941_gpios: gpios@c000 {
 		};
 
 		pm8941_mpps: mpps@a000 {
-			compatible = "qcom,pm8941-mpp";
+			compatible = "qcom,pm8941-mpp", "qcom,spmi-mpp";
 			reg = <0xa000 0x800>;
 			gpio-controller;
 			#gpio-cells = <2>;

arch/arm/boot/dts/qcom-pma8084.dtsi

@@ -19,7 +19,7 @@ rtc@6000 {
 		};
 
 		pma8084_gpios: gpios@c000 {
-			compatible = "qcom,pma8084-gpio";
+			compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
 			reg = <0xc000 0x1600>;
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -48,7 +48,7 @@ pma8084_gpios: gpios@c000 {
 		};
 
 		pma8084_mpps: mpps@a000 {
-			compatible = "qcom,pma8084-mpp";
+			compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp";
 			reg = <0xa000 0x800>;
 			gpio-controller;
 			#gpio-cells = <2>;