Skip to content

L
linux
Commit 2d86a3f0 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge branch 'next/board' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc 

* 'next/board' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc:
  ARM: S3C64XX: Configure backup battery charger on Cragganmore
  ARM: S3C64XX: Fix WM8915 IRQ polarity on Cragganmore
  ARM: S3C64XX: Configure supplies for all Cragganmore regulators
  ARM: S3C64XX: Refresh Cragganmore support
  ARM: S3C64XX: Initial support for Wolfson/Simtec Cragganmore/Banff
  OMAP4: Keyboard: Mux changes in the board file
  omap: blaze: add mmc5/wl1283 device support
  omap: 4430SDP: Register the card detect GPIO properly
  arm: omap3: cm-t35: add support for cm-t3730
  OMAP3: beagle: add support for beagleboard xM revision C
  OMAP3: rx-51: Add full regulator definitions
  omap: rx51: Platform support for lp5523 led chip
parents 3960ef32 5ddac6bc
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 1205 additions and 48 deletions
arch/arm/mach-omap2/Kconfig
View file @ 2d86a3f0
......@@ -266,9 +266,10 @@ config MACH_OMAP_ZOOM3
select REGULATOR_FIXED_VOLTAGE
config MACH_CM_T35
bool "CompuLab CM-T35 module"
bool "CompuLab CM-T35/CM-T3730 modules"
depends on ARCH_OMAP3
default y
select MACH_CM_T3730
select OMAP_PACKAGE_CUS
config MACH_CM_T3517
......@@ -277,6 +278,9 @@ config MACH_CM_T3517
default y
select OMAP_PACKAGE_CBB
config MACH_CM_T3730
bool
config MACH_IGEP0020
bool "IGEP v2 board"
depends on ARCH_OMAP3
......
arch/arm/mach-omap2/board-4430sdp.c
View file @ 2d86a3f0
......@@ -22,6 +22,7 @@
#include <linux/i2c/twl.h>
#include <linux/gpio_keys.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/leds.h>
#include <linux/leds_pwm.h>
......@@ -37,6 +38,7 @@
#include <plat/mmc.h>
#include <plat/omap4-keypad.h>
#include <video/omapdss.h>
#include <linux/wl12xx.h>
#include "mux.h"
#include "hsmmc.h"
......@@ -51,6 +53,9 @@
#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
#define GPIO_WIFI_PMENA 54
#define GPIO_WIFI_IRQ 53
static const int sdp4430_keymap[] = {
KEY(0, 0, KEY_E),
KEY(0, 1, KEY_R),
......@@ -124,6 +129,64 @@ static const int sdp4430_keymap[] = {
KEY(7, 6, KEY_OK),
KEY(7, 7, KEY_DOWN),
};
static struct omap_device_pad keypad_pads[] __initdata = {
{ .name = "kpd_col1.kpd_col1",
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
},
{ .name = "kpd_col1.kpd_col1",
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
},
{ .name = "kpd_col2.kpd_col2",
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
},
{ .name = "kpd_col3.kpd_col3",
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
},
{ .name = "kpd_col4.kpd_col4",
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
},
{ .name = "kpd_col5.kpd_col5",
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
},
{ .name = "gpmc_a23.kpd_col7",
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
},
{ .name = "gpmc_a22.kpd_col6",
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
},
{ .name = "kpd_row0.kpd_row0",
.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
OMAP_MUX_MODE1 | OMAP_INPUT_EN,
},
{ .name = "kpd_row1.kpd_row1",
.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
OMAP_MUX_MODE1 | OMAP_INPUT_EN,
},
{ .name = "kpd_row2.kpd_row2",
.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
OMAP_MUX_MODE1 | OMAP_INPUT_EN,
},
{ .name = "kpd_row3.kpd_row3",
.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
OMAP_MUX_MODE1 | OMAP_INPUT_EN,
},
{ .name = "kpd_row4.kpd_row4",
.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
OMAP_MUX_MODE1 | OMAP_INPUT_EN,
},
{ .name = "kpd_row5.kpd_row5",
.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
OMAP_MUX_MODE1 | OMAP_INPUT_EN,
},
{ .name = "gpmc_a18.kpd_row6",
.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
OMAP_MUX_MODE1 | OMAP_INPUT_EN,
},
{ .name = "gpmc_a19.kpd_row7",
.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
OMAP_MUX_MODE1 | OMAP_INPUT_EN,
},
};
static struct matrix_keymap_data sdp4430_keymap_data = {
.keymap = sdp4430_keymap,
......@@ -135,6 +198,13 @@ static struct omap4_keypad_platform_data sdp4430_keypad_data = {
.rows = 8,
.cols = 8,
};
static struct omap_board_data keypad_data = {
.id = 1,
.pads = keypad_pads,
.pads_cnt = ARRAY_SIZE(keypad_pads),
};
static struct gpio_led sdp4430_gpio_leds[] = {
{
.name = "omap4:green:debug0",
......@@ -315,8 +385,17 @@ static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},
{
.mmc = 5,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.ocr_mask = MMC_VDD_165_195,
.nonremovable = true,
},
{} /* Terminator */
};
......@@ -324,6 +403,37 @@ static struct regulator_consumer_supply sdp4430_vaux_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
};
static struct regulator_consumer_supply omap4_sdp4430_vmmc5_supply = {
.supply = "vmmc",
.dev_name = "omap_hsmmc.4",
};
static struct regulator_init_data sdp4430_vmmc5 = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap4_sdp4430_vmmc5_supply,
};
static struct fixed_voltage_config sdp4430_vwlan = {
.supply_name = "vwl1271",
.microvolts = 1800000, /* 1.8V */
.gpio = GPIO_WIFI_PMENA,
.startup_delay = 70000, /* 70msec */
.enable_high = 1,
.enabled_at_boot = 0,
.init_data = &sdp4430_vmmc5,
};
static struct platform_device omap_vwlan_device = {
.name = "reg-fixed-voltage",
.id = 1,
.dev = {
.platform_data = &sdp4430_vwlan,
},
};
static int omap4_twl6030_hsmmc_late_init(struct device *dev)
{
int ret = 0;
......@@ -593,6 +703,41 @@ static inline void board_serial_init(void)
}
#endif
static void omap4_sdp4430_wifi_mux_init(void)
{
omap_mux_init_gpio(GPIO_WIFI_IRQ, OMAP_PIN_INPUT |
OMAP_PIN_OFF_WAKEUPENABLE);
omap_mux_init_gpio(GPIO_WIFI_PMENA, OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdmmc5_cmd.sdmmc5_cmd",
OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc5_clk.sdmmc5_clk",
OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc5_dat0.sdmmc5_dat0",
OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc5_dat1.sdmmc5_dat1",
OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc5_dat2.sdmmc5_dat2",
OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc5_dat3.sdmmc5_dat3",
OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
}
static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = {
.irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ),
.board_ref_clock = WL12XX_REFCLOCK_26,
.board_tcxo_clock = WL12XX_TCXOCLOCK_26,
};
static void omap4_sdp4430_wifi_init(void)
{
omap4_sdp4430_wifi_mux_init();
if (wl12xx_set_platform_data(&omap4_sdp4430_wlan_data))
pr_err("Error setting wl12xx data\n");
platform_device_register(&omap_vwlan_device);
}
static void __init omap_4430sdp_init(void)
{
int status;
......@@ -609,6 +754,7 @@ static void __init omap_4430sdp_init(void)
omap_sfh7741prox_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
board_serial_init();
omap4_sdp4430_wifi_init();
omap4_twl6030_hsmmc_init(mmc);
usb_musb_init(&musb_board_data);
......@@ -622,7 +768,7 @@ static void __init omap_4430sdp_init(void)
ARRAY_SIZE(sdp4430_spi_board_info));
}
status = omap4_keyboard_init(&sdp4430_keypad_data);
status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data);
if (status)
pr_err("Keypad initialization failed: %d\n", status);
......
arch/arm/mach-omap2/board-cm-t35.c
View file @ 2d86a3f0
/*
* board-cm-t35.c (CompuLab CM-T35 module)
* CompuLab CM-T35/CM-T3730 modules support
*
* Copyright (C) 2009-2011 CompuLab, Ltd.
* Authors: Mike Rapoport <mike@compulab.co.il>
......@@ -535,17 +535,11 @@ static struct omap_board_mux board_mux[] __initdata = {
OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
/* DSS */
/* common DSS */
OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
......@@ -558,12 +552,6 @@ static struct omap_board_mux board_mux[] __initdata = {
OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
/* display controls */
OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
......@@ -576,19 +564,53 @@ static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
static void __init cm_t3x_common_dss_mux_init(int mux_mode)
{
omap_mux_init_signal("dss_data18", mux_mode);
omap_mux_init_signal("dss_data19", mux_mode);
omap_mux_init_signal("dss_data20", mux_mode);
omap_mux_init_signal("dss_data21", mux_mode);
omap_mux_init_signal("dss_data22", mux_mode);
omap_mux_init_signal("dss_data23", mux_mode);
}
static void __init cm_t35_init_mux(void)
{
omap_mux_init_signal("gpio_70", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
omap_mux_init_signal("gpio_71", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
omap_mux_init_signal("gpio_72", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
omap_mux_init_signal("gpio_73", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
omap_mux_init_signal("gpio_74", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
omap_mux_init_signal("gpio_75", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
cm_t3x_common_dss_mux_init(OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
}
static void __init cm_t3730_init_mux(void)
{
omap_mux_init_signal("sys_boot0", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
omap_mux_init_signal("sys_boot1", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
omap_mux_init_signal("sys_boot3", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
omap_mux_init_signal("sys_boot4", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
omap_mux_init_signal("sys_boot5", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
omap_mux_init_signal("sys_boot6", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
cm_t3x_common_dss_mux_init(OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
}
#else
static inline void cm_t35_init_mux(void) {}
static inline void cm_t3730_init_mux(void) {}
#endif
static struct omap_board_config_kernel cm_t35_config[] __initdata = {
};
static void __init cm_t35_init(void)
static void __init cm_t3x_common_init(void)
{
omap_board_config = cm_t35_config;
omap_board_config_size = ARRAY_SIZE(cm_t35_config);
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
omap_serial_init();
cm_t35_init_i2c();
cm_t35_init_nand();
omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL);
cm_t35_init_ethernet();
cm_t35_init_led();
......@@ -598,6 +620,19 @@ static void __init cm_t35_init(void)
usbhs_init(&usbhs_bdata);
}
static void __init cm_t35_init(void)
{
cm_t3x_common_init();
cm_t35_init_mux();
cm_t35_init_nand();
}
static void __init cm_t3730_init(void)
{
cm_t3x_common_init();
cm_t3730_init_mux();
}
MACHINE_START(CM_T35, "Compulab CM-T35")
.boot_params = 0x80000100,
.reserve = omap_reserve,
......@@ -607,3 +642,13 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
.init_machine = cm_t35_init,
.timer = &omap3_timer,
MACHINE_END
MACHINE_START(CM_T3730, "Compulab CM-T3730")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = cm_t35_init_early,
.init_irq = omap3_init_irq,
.init_machine = cm_t3730_init,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-omap3beagle.c
View file @ 2d86a3f0
......@@ -60,7 +60,8 @@
* AXBX = GPIO173, GPIO172, GPIO171: 1 1 1
* C1_3 = GPIO173, GPIO172, GPIO171: 1 1 0
* C4 = GPIO173, GPIO172, GPIO171: 1 0 1
* XM = GPIO173, GPIO172, GPIO171: 0 0 0
* XMA/XMB = GPIO173, GPIO172, GPIO171: 0 0 0
* XMC = GPIO173, GPIO172, GPIO171: 0 1 0
*/
enum {
OMAP3BEAGLE_BOARD_UNKN = 0,
......@@ -68,14 +69,26 @@ enum {
OMAP3BEAGLE_BOARD_C1_3,
OMAP3BEAGLE_BOARD_C4,
OMAP3BEAGLE_BOARD_XM,
OMAP3BEAGLE_BOARD_XMC,
};
static u8 omap3_beagle_version;
static u8 omap3_beagle_get_rev(void)
{
return omap3_beagle_version;
}
/*
* Board-specific configuration
* Defaults to BeagleBoard-xMC
*/
static struct {
int mmc1_gpio_wp;
int usb_pwr_level;
int reset_gpio;
int usr_button_gpio;
} beagle_config = {
.mmc1_gpio_wp = -EINVAL,
.usb_pwr_level = GPIOF_OUT_INIT_LOW,
.reset_gpio = 129,
.usr_button_gpio = 4,
};
static struct gpio omap3_beagle_rev_gpios[] __initdata = {
{ 171, GPIOF_IN, "rev_id_0" },
......@@ -110,18 +123,32 @@ static void __init omap3_beagle_init_rev(void)
case 7:
printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX;
beagle_config.mmc1_gpio_wp = 29;
beagle_config.reset_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 6:
printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3;
beagle_config.mmc1_gpio_wp = 23;
beagle_config.reset_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 5:
printk(KERN_INFO "OMAP3 Beagle Rev: C4\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
beagle_config.mmc1_gpio_wp = 23;
beagle_config.reset_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 0:
printk(KERN_INFO "OMAP3 Beagle Rev: xM\n");
printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH;
break;
case 2:
printk(KERN_INFO "OMAP3 Beagle Rev: xM C\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC;
break;
default:
printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev);
......@@ -225,7 +252,7 @@ static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 29,
.gpio_wp = -EINVAL,
},
{} /* Terminator */
};
......@@ -243,17 +270,11 @@ static struct gpio_led gpio_leds[];
static int beagle_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
int r, usb_pwr_level;
if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
mmc[0].gpio_wp = -EINVAL;
} else if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) ||
(omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C4)) {
omap_mux_init_gpio(23, OMAP_PIN_INPUT);
mmc[0].gpio_wp = 23;
} else {
omap_mux_init_gpio(29, OMAP_PIN_INPUT);
}
int r;
if (beagle_config.mmc1_gpio_wp != -EINVAL)
omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp;
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
......@@ -263,9 +284,8 @@ static int beagle_twl_gpio_setup(struct device *dev,
* high / others active low)
* DVI reset GPIO is different between beagle revisions
*/
if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
usb_pwr_level = GPIOF_OUT_INIT_HIGH;
beagle_dvi_device.reset_gpio = 129;
/* Valid for all -xM revisions */
if (cpu_is_omap3630()) {
/*
* gpio + 1 on Xm controls the TFP410's enable line (active low)
* gpio + 2 control varies depending on the board rev as below:
......@@ -283,8 +303,6 @@ static int beagle_twl_gpio_setup(struct device *dev,
pr_err("%s: unable to configure DVI_LDO_EN\n",
__func__);
} else {
usb_pwr_level = GPIOF_OUT_INIT_LOW;
beagle_dvi_device.reset_gpio = 170;
/*
* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
......@@ -292,8 +310,10 @@ static int beagle_twl_gpio_setup(struct device *dev,
if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
pr_err("%s: unable to configure EHCI_nOC\n", __func__);
}
beagle_dvi_device.reset_gpio = beagle_config.reset_gpio;
gpio_request_one(gpio + TWL4030_GPIO_MAX, usb_pwr_level, "nEN_USB_PWR");
gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
"nEN_USB_PWR");
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
......@@ -404,7 +424,8 @@ static struct platform_device leds_gpio = {
static struct gpio_keys_button gpio_buttons[] = {
{
.code = BTN_EXTRA,
.gpio = 7,
/* Dynamically assigned depending on board */
.gpio = -EINVAL,
.desc = "user",
.wakeup = 1,
},
......@@ -468,8 +489,8 @@ static void __init beagle_opp_init(void)
return;
}
/* Custom OPP enabled for XM */
if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
/* Custom OPP enabled for all xM versions */
if (cpu_is_omap3630()) {
struct omap_hwmod *mh = omap_hwmod_lookup("mpu");
struct omap_hwmod *dh = omap_hwmod_lookup("iva");
struct device *dev;
......@@ -509,6 +530,9 @@ static void __init omap3_beagle_init(void)
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3_beagle_init_rev();
omap3_beagle_i2c_init();
gpio_buttons[0].gpio = beagle_config.usr_button_gpio;
platform_add_devices(omap3_beagle_devices,
ARRAY_SIZE(omap3_beagle_devices));
omap_display_init(&beagle_dss_data);
......
arch/arm/mach-omap2/board-rx51-peripherals.c
View file @ 2d86a3f0
......@@ -39,6 +39,7 @@
#include <sound/tpa6130a2-plat.h>
#include <media/radio-si4713.h>
#include <media/si4713.h>
#include <linux/leds-lp5523.h>
#include <../drivers/staging/iio/light/tsl2563.h>
......@@ -53,6 +54,7 @@
#define RX51_WL1251_IRQ_GPIO 42
#define RX51_FMTX_RESET_GPIO 163
#define RX51_FMTX_IRQ 53
#define RX51_LP5523_CHIP_EN_GPIO 41
#define RX51_USB_TRANSCEIVER_RST_GPIO 67
......@@ -71,6 +73,64 @@ static struct tsl2563_platform_data rx51_tsl2563_platform_data = {
};
#endif
#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE)
static struct lp5523_led_config rx51_lp5523_led_config[] = {
{
.chan_nr = 0,
.led_current = 50,
}, {
.chan_nr = 1,
.led_current = 50,
}, {
.chan_nr = 2,
.led_current = 50,
}, {
.chan_nr = 3,
.led_current = 50,
}, {
.chan_nr = 4,
.led_current = 50,
}, {
.chan_nr = 5,
.led_current = 50,
}, {
.chan_nr = 6,
.led_current = 50,
}, {
.chan_nr = 7,
.led_current = 50,
}, {
.chan_nr = 8,
.led_current = 50,
}
};
static int rx51_lp5523_setup(void)
{
return gpio_request_one(RX51_LP5523_CHIP_EN_GPIO, GPIOF_DIR_OUT,
"lp5523_enable");
}
static void rx51_lp5523_release(void)
{
gpio_free(RX51_LP5523_CHIP_EN_GPIO);
}
static void rx51_lp5523_enable(bool state)
{
gpio_set_value(RX51_LP5523_CHIP_EN_GPIO, !!state);
}
static struct lp5523_platform_data rx51_lp5523_platform_data = {
.led_config = rx51_lp5523_led_config,
.num_channels = ARRAY_SIZE(rx51_lp5523_led_config),
.clock_mode = LP5523_CLOCK_AUTO,
.setup_resources = rx51_lp5523_setup,
.release_resources = rx51_lp5523_release,
.enable = rx51_lp5523_enable,
};
#endif
static struct omap2_mcspi_device_config wl1251_mcspi_config = {
.turbo_mode = 0,
.single_channel = 1,
......@@ -495,6 +555,32 @@ static struct regulator_init_data rx51_vmmc2 = {
.consumer_supplies = rx51_vmmc2_supplies,
};
static struct regulator_init_data rx51_vpll1 = {
.constraints = {
.name = "VPLL",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.always_on = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE,
},
};
static struct regulator_init_data rx51_vpll2 = {
.constraints = {
.name = "VSDI_CSI",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.always_on = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE,
},
};
static struct regulator_init_data rx51_vsim = {
.constraints = {
.name = "VMMC2_IO_18",
......@@ -524,6 +610,43 @@ static struct regulator_init_data rx51_vio = {
.consumer_supplies = rx51_vio_supplies,
};
static struct regulator_init_data rx51_vintana1 = {
.constraints = {
.name = "VINTANA1",
.min_uV = 1500000,
.max_uV = 1500000,
.always_on = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE,
},
};
static struct regulator_init_data rx51_vintana2 = {
.constraints = {
.name = "VINTANA2",
.min_uV = 2750000,
.max_uV = 2750000,
.apply_uV = true,
.always_on = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE,
},
};
static struct regulator_init_data rx51_vintdig = {
.constraints = {
.name = "VINTDIG",
.min_uV = 1500000,
.max_uV = 1500000,
.always_on = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE,
},
};
static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = {
.gpio_reset = RX51_FMTX_RESET_GPIO,
};
......@@ -761,7 +884,12 @@ static struct twl4030_platform_data rx51_twldata __initdata = {
.vaux2 = &rx51_vaux2,
.vaux4 = &rx51_vaux4,
.vmmc1 = &rx51_vmmc1,
.vpll1 = &rx51_vpll1,
.vpll2 = &rx51_vpll2,
.vsim = &rx51_vsim,
.vintana1 = &rx51_vintana1,
.vintana2 = &rx51_vintana2,
.vintdig = &rx51_vintdig,
.vio = &rx51_vio,
};
......@@ -799,6 +927,12 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
I2C_BOARD_INFO("tsl2563", 0x29),
.platform_data = &rx51_tsl2563_platform_data,
},
#endif
#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE)
{
I2C_BOARD_INFO("lp5523", 0x32),
.platform_data = &rx51_lp5523_platform_data,
},
#endif
{
I2C_BOARD_INFO("tpa6130a2", 0x60),
......@@ -950,6 +1084,7 @@ static void __init rx51_init_wl1251(void)
void __init rx51_peripherals_init(void)
{
rx51_i2c_init();
regulator_has_full_constraints();
gpmc_onenand_init(board_onenand_data);
board_smc91x_init();
rx51_add_gpio_keys();
......
arch/arm/mach-omap2/devices.c
View file @ 2d86a3f0
......@@ -230,7 +230,7 @@ struct omap_device_pm_latency omap_keyboard_latency[] = {
};
int __init omap4_keyboard_init(struct omap4_keypad_platform_data
*sdp4430_keypad_data)
*sdp4430_keypad_data, struct omap_board_data *bdata)
{
struct omap_device *od;
struct omap_hwmod *oh;
......@@ -257,6 +257,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data
name, oh->name);
return PTR_ERR(od);
}
oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
return 0;
}
......
arch/arm/mach-s3c64xx/Kconfig
View file @ 2d86a3f0
......@@ -267,3 +267,26 @@ config MACH_SMARTQ7
select MACH_SMARTQ
help
Machine support for the SmartQ 7
config MACH_WLF_CRAGG_6410
bool "Wolfson Cragganmore 6410"
select CPU_S3C6410
select S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_I2C1
select S3C64XX_SETUP_IDE
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_KEYPAD
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_KEYPAD
select S3C_DEV_USB_HOST
select S3C_DEV_USB_HSOTG
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_I2C1
select S3C_DEV_WDT
select S3C_DEV_RTC
select S3C64XX_DEV_SPI
select S3C24XX_GPIO_EXTRA128
help
Machine support for the Wolfson Cragganmore S3C6410 variant.
arch/arm/mach-s3c64xx/Makefile
View file @ 2d86a3f0
......@@ -55,6 +55,7 @@ obj-$(CONFIG_MACH_HMT) += mach-hmt.o
obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o
obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o
# device support
......
arch/arm/mach-s3c64xx/include/mach/irqs.h
View file @ 2d86a3f0
......@@ -198,7 +198,9 @@
* interrupt controllers). */
#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
#ifdef CONFIG_SMDK6410_WM1190_EV1
#ifdef CONFIG_MACH_WLF_CRAGG_6410
#define IRQ_BOARD_NR 128
#elif defined(CONFIG_SMDK6410_WM1190_EV1)
#define IRQ_BOARD_NR 64
#elif defined(CONFIG_SMDK6410_WM1192_EV1)
#define IRQ_BOARD_NR 64
......
arch/arm/mach-s3c64xx/mach-crag6410.c 0 → 100644
View file @ 2d86a3f0
This diff is collapsed.
arch/arm/plat-omap/include/plat/omap4-keypad.h
View file @ 2d86a3f0
......@@ -10,5 +10,6 @@ struct omap4_keypad_platform_data {
u8 cols;
};
extern int omap4_keyboard_init(struct omap4_keypad_platform_data *);
extern int omap4_keyboard_init(struct omap4_keypad_platform_data *,
struct omap_board_data *);
#endif
arch/arm/plat-omap/include/plat/uncompress.h
View file @ 2d86a3f0
......@@ -148,6 +148,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
/* omap3 based boards using UART3 */
DEBUG_LL_OMAP3(3, cm_t35);
DEBUG_LL_OMAP3(3, cm_t3517);
DEBUG_LL_OMAP3(3, cm_t3730);
DEBUG_LL_OMAP3(3, craneboard);
DEBUG_LL_OMAP3(3, devkit8000);
DEBUG_LL_OMAP3(3, igep0020);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7