Commit 2e5061e4 authored by Heiko Carstens's avatar Heiko Carstens Committed by Martin Schwidefsky

[S390] Convert machine feature detection code to C.

From: Heiko Carstens <heiko.carstens@de.ibm.com>
From: Carsten Otte <cotte@de.ibm.com>

This lets us use defines for the magic bits in machine flags instead
of using plain numbers all over the place.
In addition on newer machines features/facilities are indicated by the
result of the stfl instruction. So we use these bits instead of trying
to execute new instructions and check wether we get an exception or
not.
Also the mvpg instruction is always available when in zArch mode,
whereas the idte instruction is only available in zArch mode. This
results in some minor optimizations.
Signed-off-by: default avatarHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: default avatarCarsten Otte <cotte@de.ibm.com>
Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
parent 8fc63658
......@@ -139,15 +139,15 @@ static noinline __init void detect_machine_type(void)
/* Running under z/VM ? */
if (cpuinfo->cpu_id.version == 0xff)
machine_flags |= 1;
machine_flags |= MACHINE_FLAG_VM;
/* Running on a P/390 ? */
if (cpuinfo->cpu_id.machine == 0x7490)
machine_flags |= 4;
machine_flags |= MACHINE_FLAG_P390;
/* Running under KVM ? */
if (cpuinfo->cpu_id.version == 0xfe)
machine_flags |= 64;
machine_flags |= MACHINE_FLAG_KVM;
}
#ifdef CONFIG_64BIT
......@@ -268,6 +268,103 @@ static noinline __init void setup_lowcore_early(void)
s390_base_pgm_handler_fn = early_pgm_check_handler;
}
static __init void detect_mvpg(void)
{
#ifndef CONFIG_64BIT
int rc;
asm volatile(
" la 0,0\n"
" mvpg %2,%2\n"
"0: la %0,0\n"
"1:\n"
EX_TABLE(0b,1b)
: "=d" (rc) : "0" (-EOPNOTSUPP), "a" (0) : "memory", "cc", "0");
if (!rc)
machine_flags |= MACHINE_FLAG_MVPG;
#endif
}
static __init void detect_ieee(void)
{
#ifndef CONFIG_64BIT
int rc, tmp;
asm volatile(
" efpc %1,0\n"
"0: la %0,0\n"
"1:\n"
EX_TABLE(0b,1b)
: "=d" (rc), "=d" (tmp): "0" (-EOPNOTSUPP) : "cc");
if (!rc)
machine_flags |= MACHINE_FLAG_IEEE;
#endif
}
static __init void detect_csp(void)
{
#ifndef CONFIG_64BIT
int rc;
asm volatile(
" la 0,0\n"
" la 1,0\n"
" la 2,4\n"
" csp 0,2\n"
"0: la %0,0\n"
"1:\n"
EX_TABLE(0b,1b)
: "=d" (rc) : "0" (-EOPNOTSUPP) : "cc", "0", "1", "2");
if (!rc)
machine_flags |= MACHINE_FLAG_CSP;
#endif
}
static __init void detect_diag9c(void)
{
unsigned int cpu_address;
int rc;
cpu_address = stap();
asm volatile(
" diag %2,0,0x9c\n"
"0: la %0,0\n"
"1:\n"
EX_TABLE(0b,1b)
: "=d" (rc) : "0" (-EOPNOTSUPP), "d" (cpu_address) : "cc");
if (!rc)
machine_flags |= MACHINE_FLAG_DIAG9C;
}
static __init void detect_diag44(void)
{
#ifdef CONFIG_64BIT
int rc;
asm volatile(
" diag 0,0,0x44\n"
"0: la %0,0\n"
"1:\n"
EX_TABLE(0b,1b)
: "=d" (rc) : "0" (-EOPNOTSUPP) : "cc");
if (!rc)
machine_flags |= MACHINE_FLAG_DIAG44;
#endif
}
static __init void detect_machine_facilities(void)
{
#ifdef CONFIG_64BIT
unsigned int facilities;
facilities = stfl();
if (facilities & (1 << 28))
machine_flags |= MACHINE_FLAG_IDTE;
if (facilities & (1 << 4))
machine_flags |= MACHINE_FLAG_MVCOS;
#endif
}
/*
* Save ipl parameters, clear bss memory, initialize storage keys
* and create a kernel NSS at startup if the SAVESYS= parm is defined
......@@ -285,6 +382,12 @@ void __init startup_init(void)
create_kernel_nss();
sort_main_extable();
setup_lowcore_early();
detect_mvpg();
detect_ieee();
detect_csp();
detect_diag9c();
detect_diag44();
detect_machine_facilities();
sclp_read_info_early();
sclp_facilities_detect();
memsize = sclp_memory_detect();
......
......@@ -57,61 +57,6 @@ startup_continue:
#
l %r14,.Lstartup_init-.LPG1(%r13)
basr %r14,%r14
l %r12,.Lmflags-.LPG1(%r13) # get address of machine_flags
#
# find out if we have an IEEE fpu
#
mvc __LC_PGM_NEW_PSW(8),.Lpcfpu-.LPG1(%r13)
efpc %r0,0 # test IEEE extract fpc instruction
oi 3(%r12),2 # set IEEE fpu flag
.Lchkfpu:
#
# find out if we have the CSP instruction
#
mvc __LC_PGM_NEW_PSW(8),.Lpccsp-.LPG1(%r13)
la %r0,0
lr %r1,%r0
la %r2,4
csp %r0,%r2 # Test CSP instruction
oi 3(%r12),8 # set CSP flag
.Lchkcsp:
#
# find out if we have the MVPG instruction
#
mvc __LC_PGM_NEW_PSW(8),.Lpcmvpg-.LPG1(%r13)
sr %r0,%r0
la %r1,0
la %r2,0
mvpg %r1,%r2 # Test CSP instruction
oi 3(%r12),16 # set MVPG flag
.Lchkmvpg:
#
# find out if we have the IDTE instruction
#
mvc __LC_PGM_NEW_PSW(8),.Lpcidte-.LPG1(%r13)
.long 0xb2b10000 # store facility list
tm 0xc8,0x08 # check bit for clearing-by-ASCE
bno .Lchkidte-.LPG1(%r13)
lhi %r1,2094
lhi %r2,0
.long 0xb98e2001
oi 3(%r12),0x80 # set IDTE flag
.Lchkidte:
#
# find out if the diag 0x9c is available
#
mvc __LC_PGM_NEW_PSW(8),.Lpcdiag9c-.LPG1(%r13)
stap __LC_CPUID+4 # store cpu address
lh %r1,__LC_CPUID+4
diag %r1,0,0x9c # test diag 0x9c
oi 2(%r12),1 # set diag9c flag
.Lchkdiag9c:
lpsw .Lentry-.LPG1(13) # jump to _stext in primary-space,
# virtual and never return ...
.align 8
......@@ -132,13 +77,7 @@ startup_continue:
.long 0 # cr13: home space segment table
.long 0xc0000000 # cr14: machine check handling off
.long 0 # cr15: linkage stack operations
.Lpcfpu:.long 0x00080000,0x80000000 + .Lchkfpu
.Lpccsp:.long 0x00080000,0x80000000 + .Lchkcsp
.Lpcmvpg:.long 0x00080000,0x80000000 + .Lchkmvpg
.Lpcidte:.long 0x00080000,0x80000000 + .Lchkidte
.Lpcdiag9c:.long 0x00080000,0x80000000 + .Lchkdiag9c
.Lmchunk:.long memory_chunk
.Lmflags:.long machine_flags
.Lbss_bgn: .long __bss_start
.Lbss_end: .long _end
.Lparmaddr: .long PARMAREA
......
......@@ -125,68 +125,6 @@ startup_continue:
# and create a kernel NSS if the SAVESYS= parm is defined
#
brasl %r14,startup_init
# set program check new psw mask
mvc __LC_PGM_NEW_PSW(8),.Lpcmsk-.LPG1(%r13)
larl %r12,machine_flags
#
# find out if we have the MVPG instruction
#
la %r1,0f-.LPG1(%r13) # set program check address
stg %r1,__LC_PGM_NEW_PSW+8
sgr %r0,%r0
lghi %r1,0
lghi %r2,0
mvpg %r1,%r2 # test MVPG instruction
oi 7(%r12),16 # set MVPG flag
0:
#
# find out if the diag 0x44 works in 64 bit mode
#
la %r1,0f-.LPG1(%r13) # set program check address
stg %r1,__LC_PGM_NEW_PSW+8
diag 0,0,0x44 # test diag 0x44
oi 7(%r12),32 # set diag44 flag
0:
#
# find out if we have the IDTE instruction
#
la %r1,0f-.LPG1(%r13) # set program check address
stg %r1,__LC_PGM_NEW_PSW+8
.long 0xb2b10000 # store facility list
tm 0xc8,0x08 # check bit for clearing-by-ASCE
bno 0f-.LPG1(%r13)
lhi %r1,2048
lhi %r2,0
.long 0xb98e2001
oi 7(%r12),0x80 # set IDTE flag
0:
#
# find out if the diag 0x9c is available
#
la %r1,0f-.LPG1(%r13) # set program check address
stg %r1,__LC_PGM_NEW_PSW+8
stap __LC_CPUID+4 # store cpu address
lh %r1,__LC_CPUID+4
diag %r1,0,0x9c # test diag 0x9c
oi 6(%r12),1 # set diag9c flag
0:
#
# find out if we have the MVCOS instruction
#
la %r1,0f-.LPG1(%r13) # set program check address
stg %r1,__LC_PGM_NEW_PSW+8
.short 0xc800 # mvcos 0(%r0),0(%r0),%r0
.short 0x0000
.short 0x0000
0: tm 0x8f,0x13 # special-operation exception?
bno 1f-.LPG1(%r13) # if yes, MVCOS is present
oi 6(%r12),2 # set MVCOS flag
1:
lpswe .Lentry-.LPG1(13) # jump to _stext in primary-space,
# virtual and never return ...
.align 16
......
......@@ -73,7 +73,7 @@ EXPORT_SYMBOL(uaccess);
unsigned int console_mode = 0;
unsigned int console_devno = -1;
unsigned int console_irq = -1;
unsigned long machine_flags = 0;
unsigned long machine_flags;
unsigned long elf_hwcap = 0;
char elf_platform[ELF_PLATFORM_SIZE];
......
......@@ -59,23 +59,36 @@ extern unsigned int s390_noexec;
*/
extern unsigned long machine_flags;
#define MACHINE_IS_VM (machine_flags & 1)
#define MACHINE_IS_P390 (machine_flags & 4)
#define MACHINE_HAS_MVPG (machine_flags & 16)
#define MACHINE_IS_KVM (machine_flags & 64)
#define MACHINE_HAS_IDTE (machine_flags & 128)
#define MACHINE_HAS_DIAG9C (machine_flags & 256)
#define MACHINE_FLAG_VM (1UL << 0)
#define MACHINE_FLAG_IEEE (1UL << 1)
#define MACHINE_FLAG_P390 (1UL << 2)
#define MACHINE_FLAG_CSP (1UL << 3)
#define MACHINE_FLAG_MVPG (1UL << 4)
#define MACHINE_FLAG_DIAG44 (1UL << 5)
#define MACHINE_FLAG_IDTE (1UL << 6)
#define MACHINE_FLAG_DIAG9C (1UL << 7)
#define MACHINE_FLAG_MVCOS (1UL << 8)
#define MACHINE_FLAG_KVM (1UL << 9)
#define MACHINE_IS_VM (machine_flags & MACHINE_FLAG_VM)
#define MACHINE_IS_KVM (machine_flags & MACHINE_FLAG_KVM)
#define MACHINE_IS_P390 (machine_flags & MACHINE_FLAG_P390)
#define MACHINE_HAS_DIAG9C (machine_flags & MACHINE_FLAG_DIAG9C)
#ifndef __s390x__
#define MACHINE_HAS_IEEE (machine_flags & 2)
#define MACHINE_HAS_CSP (machine_flags & 8)
#define MACHINE_HAS_IEEE (machine_flags & MACHINE_FLAG_IEEE)
#define MACHINE_HAS_CSP (machine_flags & MACHINE_FLAG_CSP)
#define MACHINE_HAS_IDTE (0)
#define MACHINE_HAS_DIAG44 (1)
#define MACHINE_HAS_MVPG (machine_flags & MACHINE_FLAG_MVPG)
#define MACHINE_HAS_MVCOS (0)
#else /* __s390x__ */
#define MACHINE_HAS_IEEE (1)
#define MACHINE_HAS_CSP (1)
#define MACHINE_HAS_DIAG44 (machine_flags & 32)
#define MACHINE_HAS_MVCOS (machine_flags & 512)
#define MACHINE_HAS_IDTE (machine_flags & MACHINE_FLAG_IDTE)
#define MACHINE_HAS_DIAG44 (machine_flags & MACHINE_FLAG_DIAG44)
#define MACHINE_HAS_MVPG (1)
#define MACHINE_HAS_MVCOS (machine_flags & MACHINE_FLAG_MVCOS)
#endif /* __s390x__ */
#define MACHINE_HAS_SCLP (!MACHINE_IS_P390)
......
......@@ -19,6 +19,7 @@
#include <asm/lowcore.h>
#include <asm/sigp.h>
#include <asm/ptrace.h>
#include <asm/system.h>
/*
s390 specific smp.c headers
......@@ -53,10 +54,7 @@ extern void machine_power_off_smp(void);
static inline __u16 hard_smp_processor_id(void)
{
__u16 cpu_address;
asm volatile("stap %0" : "=m" (cpu_address));
return cpu_address;
return stap();
}
/*
......
......@@ -432,6 +432,14 @@ static inline unsigned int stfl(void)
return S390_lowcore.stfl_fac_list;
}
static inline unsigned short stap(void)
{
unsigned short cpu_address;
asm volatile("stap %0" : "=m" (cpu_address));
return cpu_address;
}
extern void (*_machine_restart)(char *command);
extern void (*_machine_halt)(void);
extern void (*_machine_power_off)(void);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment