Commit 2e5ae898 authored by Aaro Koskinen's avatar Aaro Koskinen Committed by Greg Kroah-Hartman

staging: octeon-usb: cvmx-usb: replace long udelays with mdelays

Replace long udelays with mdelays.
Signed-off-by: default avatarAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 27bf5525
...@@ -672,7 +672,7 @@ int cvmx_usb_initialize(cvmx_usb_state_t *state, int usb_port_number, ...@@ -672,7 +672,7 @@ int cvmx_usb_initialize(cvmx_usb_state_t *state, int usb_port_number,
__cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index), __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
usbn_clk_ctl.u64); usbn_clk_ctl.u64);
/* 4. Wait 1 ms for PHY clock to start */ /* 4. Wait 1 ms for PHY clock to start */
cvmx_wait_usec(1000); mdelay(1);
/* 5. Program the Reset input from automatic test equipment field in the /* 5. Program the Reset input from automatic test equipment field in the
USBP control and status register: USBN_USBP_CTL_STATUS[ATE_RESET] = 1 */ USBP control and status register: USBN_USBP_CTL_STATUS[ATE_RESET] = 1 */
usbn_usbp_ctl_status.u64 = __cvmx_usb_read_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index)); usbn_usbp_ctl_status.u64 = __cvmx_usb_read_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index));
...@@ -879,7 +879,7 @@ int cvmx_usb_enable(cvmx_usb_state_t *state) ...@@ -879,7 +879,7 @@ int cvmx_usb_enable(cvmx_usb_state_t *state)
/* Wait at least 50ms (high speed), or 10ms (full speed) for the reset /* Wait at least 50ms (high speed), or 10ms (full speed) for the reset
process to complete. */ process to complete. */
cvmx_wait_usec(50000); mdelay(50);
/* Program the port reset bit to 0, USBC_HPRT[PRTRST] = 0 */ /* Program the port reset bit to 0, USBC_HPRT[PRTRST] = 0 */
USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t, prtrst, 0); USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t, prtrst, 0);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment