i40e: use functions to enable and disable icr 0

Introduce i40e_irq_dynamic_disable_icr0 and use it and its previously-
extant counterpart when appropriate.

Change-Id: Ieb4037874fba2e96fc2354b34a97a3cb8f6490f3
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/i40e/i40e.h

@@ -565,6 +565,7 @@ static inline void i40e_dbg_init(void) {}
 static inline void i40e_dbg_exit(void) {}
 #endif /* CONFIG_DEBUG_FS*/
 void i40e_irq_dynamic_enable(struct i40e_vsi *vsi, int vector);
+void i40e_irq_dynamic_disable_icr0(struct i40e_pf *pf);
 void i40e_irq_dynamic_enable_icr0(struct i40e_pf *pf);
 int i40e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
 void i40e_vlan_stripping_disable(struct i40e_vsi *vsi);

drivers/net/ethernet/intel/i40e/i40e_main.c

@@ -2542,6 +2542,19 @@ static void i40e_configure_msi_and_legacy(struct i40e_vsi *vsi)
 	i40e_flush(hw);
 }
 
+/**
+ * i40e_irq_dynamic_disable_icr0 - Disable default interrupt generation for icr0
+ * @pf: board private structure
+ **/
+void i40e_irq_dynamic_disable_icr0(struct i40e_pf *pf)
+{
+	struct i40e_hw *hw = &pf->hw;
+
+	wr32(hw, I40E_PFINT_DYN_CTL0,
+	     I40E_ITR_NONE << I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT);
+	i40e_flush(hw);
+}
+
 /**
  * i40e_irq_dynamic_enable_icr0 - Enable default interrupt generation for icr0
  * @pf: board private structure

drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c

@@ -719,15 +719,14 @@ static bool i40e_vfs_are_assigned(struct i40e_pf *pf)
  **/
 void i40e_free_vfs(struct i40e_pf *pf)
 {
-	struct i40e_hw *hw = &pf->hw;
 	int i, tmp;
 
 	if (!pf->vf)
 		return;
 
 	/* Disable interrupt 0 so we don't try to handle the VFLR. */
-	wr32(hw, I40E_PFINT_DYN_CTL0, 0);
-	i40e_flush(hw);
+	i40e_irq_dynamic_disable_icr0(pf);
+
 	mdelay(10); /* let any messages in transit get finished up */
 	/* free up vf resources */
 	tmp = pf->num_alloc_vfs;
@@ -749,11 +748,7 @@ void i40e_free_vfs(struct i40e_pf *pf)
 			 "unable to disable SR-IOV because VFs are assigned.\n");
 
 	/* Re-enable interrupt 0. */
-	wr32(hw, I40E_PFINT_DYN_CTL0,
-	     I40E_PFINT_DYN_CTL0_INTENA_MASK |
-	     I40E_PFINT_DYN_CTL0_CLEARPBA_MASK |
-	     (I40E_ITR_NONE << I40E_PFINT_DYN_CTL0_ITR_INDX_SHIFT));
-	i40e_flush(hw);
+	i40e_irq_dynamic_enable_icr0(pf);
 }
 
 #ifdef CONFIG_PCI_IOV
@@ -766,13 +761,12 @@ void i40e_free_vfs(struct i40e_pf *pf)
  **/
 static int i40e_alloc_vfs(struct i40e_pf *pf, u16 num_alloc_vfs)
 {
-	struct i40e_hw *hw = &pf->hw;
 	struct i40e_vf *vfs;
 	int i, ret = 0;
 
 	/* Disable interrupt 0 so we don't try to handle the VFLR. */
-	wr32(hw, I40E_PFINT_DYN_CTL0, 0);
-	i40e_flush(hw);
+	i40e_irq_dynamic_disable_icr0(pf);
+
 	ret = pci_enable_sriov(pf->pdev, num_alloc_vfs);
 	if (ret) {
 		dev_err(&pf->pdev->dev,
@@ -810,10 +804,7 @@ static int i40e_alloc_vfs(struct i40e_pf *pf, u16 num_alloc_vfs)
 		i40e_free_vfs(pf);
 err_iov:
 	/* Re-enable interrupt 0. */
-	wr32(hw, I40E_PFINT_DYN_CTL0,
-	     I40E_PFINT_DYN_CTL0_INTENA_MASK |
-	     I40E_PFINT_DYN_CTL0_CLEARPBA_MASK |
-	     (I40E_ITR_NONE << I40E_PFINT_DYN_CTL0_ITR_INDX_SHIFT));
+	i40e_irq_dynamic_enable_icr0(pf);
 	return ret;
 }