Commit 2ef7f0da authored by Magnus Damm's avatar Magnus Damm Committed by Paul Mundt

sh: hibernation support

Add Suspend-to-disk / swsusp / CONFIG_HIBERNATION support
to the SuperH architecture.

To suspend, use "swapon /dev/sda2; echo disk > /sys/power/state"
To resume, pass "resume=/dev/sda2" on the kernel command line.

The patch "pm: rework includes, remove arch ifdefs V2" is
needed to allow the generic swsusp code to build properly.

Hibernation is not enabled with this patch though, a patch
setting ARCH_HIBERNATION_POSSIBLE will be submitted later.
Signed-off-by: default avatarMagnus Damm <damm@igel.co.jp>
Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
parent edab56f4
...@@ -3,6 +3,7 @@ ...@@ -3,6 +3,7 @@
#include <asm-generic/sections.h> #include <asm-generic/sections.h>
extern void __nosave_begin, __nosave_end;
extern long __machvec_start, __machvec_end; extern long __machvec_start, __machvec_end;
extern char __uncached_start, __uncached_end; extern char __uncached_start, __uncached_end;
extern char _ebss[]; extern char _ebss[];
......
#ifndef _ASM_SH_SUSPEND_H
#define _ASM_SH_SUSPEND_H
static inline int arch_prepare_suspend(void) { return 0; }
#include <asm/ptrace.h>
struct swsusp_arch_regs {
struct pt_regs user_regs;
unsigned long bank1_regs[8];
};
#endif /* _ASM_SH_SUSPEND_H */
...@@ -30,5 +30,6 @@ obj-$(CONFIG_KPROBES) += kprobes.o ...@@ -30,5 +30,6 @@ obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_GENERIC_GPIO) += gpio.o obj-$(CONFIG_GENERIC_GPIO) += gpio.o
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
obj-$(CONFIG_DUMP_CODE) += disassemble.o obj-$(CONFIG_DUMP_CODE) += disassemble.o
obj-$(CONFIG_HIBERNATION) += swsusp.o
EXTRA_CFLAGS += -Werror EXTRA_CFLAGS += -Werror
...@@ -12,8 +12,10 @@ ...@@ -12,8 +12,10 @@
#include <linux/types.h> #include <linux/types.h>
#include <linux/mm.h> #include <linux/mm.h>
#include <linux/kbuild.h> #include <linux/kbuild.h>
#include <linux/suspend.h>
#include <asm/thread_info.h> #include <asm/thread_info.h>
#include <asm/suspend.h>
int main(void) int main(void)
{ {
...@@ -25,5 +27,11 @@ int main(void) ...@@ -25,5 +27,11 @@ int main(void)
DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count)); DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count));
DEFINE(TI_RESTART_BLOCK,offsetof(struct thread_info, restart_block)); DEFINE(TI_RESTART_BLOCK,offsetof(struct thread_info, restart_block));
#ifdef CONFIG_HIBERNATION
DEFINE(PBE_ADDRESS, offsetof(struct pbe, address));
DEFINE(PBE_ORIG_ADDRESS, offsetof(struct pbe, orig_address));
DEFINE(PBE_NEXT, offsetof(struct pbe, next));
DEFINE(SWSUSP_ARCH_REGS_SIZE, sizeof(struct swsusp_arch_regs));
#endif
return 0; return 0;
} }
...@@ -4,6 +4,8 @@ ...@@ -4,6 +4,8 @@
obj-y := ex.o probe.o entry.o setup-sh3.o obj-y := ex.o probe.o entry.o setup-sh3.o
obj-$(CONFIG_HIBERNATION) += swsusp.o
# CPU subtype setup # CPU subtype setup
obj-$(CONFIG_CPU_SUBTYPE_SH7705) += setup-sh7705.o obj-$(CONFIG_CPU_SUBTYPE_SH7705) += setup-sh7705.o
obj-$(CONFIG_CPU_SUBTYPE_SH7706) += setup-sh770x.o obj-$(CONFIG_CPU_SUBTYPE_SH7706) += setup-sh770x.o
......
...@@ -216,7 +216,7 @@ ENTRY(sh_bios_handler) ...@@ -216,7 +216,7 @@ ENTRY(sh_bios_handler)
! r9 trashed ! r9 trashed
! BL=0 on entry, on exit BL=1 (depending on r8). ! BL=0 on entry, on exit BL=1 (depending on r8).
restore_regs: ENTRY(restore_regs)
mov.l @r15+, r0 mov.l @r15+, r0
mov.l @r15+, r1 mov.l @r15+, r1
mov.l @r15+, r2 mov.l @r15+, r2
...@@ -362,8 +362,10 @@ general_exception: ...@@ -362,8 +362,10 @@ general_exception:
nop nop
! Save registers / Switch to bank 0 ! Save registers / Switch to bank 0
mov.l k4, k2 ! keep vector in k2
mov.l 1f, k4 ! SR bits to clear in k4
bsr save_regs ! needs original pr value in k3 bsr save_regs ! needs original pr value in k3
mov k4, k2 ! keep vector in k2 nop
bra handle_exception_special bra handle_exception_special
nop nop
...@@ -471,6 +473,7 @@ handle_exception: ...@@ -471,6 +473,7 @@ handle_exception:
! Save registers / Switch to bank 0 ! Save registers / Switch to bank 0
mov.l 5f, k2 ! vector register address mov.l 5f, k2 ! vector register address
mov.l 1f, k4 ! SR bits to clear in k4
bsr save_regs ! needs original pr value in k3 bsr save_regs ! needs original pr value in k3
mov.l @k2, k2 ! read out vector and keep in k2 mov.l @k2, k2 ! read out vector and keep in k2
...@@ -495,10 +498,10 @@ handle_exception_special: ...@@ -495,10 +498,10 @@ handle_exception_special:
! k0 contains original stack pointer* ! k0 contains original stack pointer*
! k1 trashed ! k1 trashed
! k3 passes original pr* ! k3 passes original pr*
! k4 trashed ! k4 passes SR bitmask
! BL=1 on entry, on exit BL=0. ! BL=1 on entry, on exit BL=0.
save_regs: ENTRY(save_regs)
mov #-1, r1 mov #-1, r1
mov.l k1, @-r15 ! set TRA (default: -1) mov.l k1, @-r15 ! set TRA (default: -1)
sts.l macl, @-r15 sts.l macl, @-r15
...@@ -518,8 +521,16 @@ save_regs: ...@@ -518,8 +521,16 @@ save_regs:
mov.l r8, @-r15 mov.l r8, @-r15
mov.l 0f, k3 ! SR bits to set in k3 mov.l 0f, k3 ! SR bits to set in k3
mov.l 1f, k4 ! SR bits to clear in k4
! fall-through
! save_low_regs()
! - modify SR for bank switch
! - save r7, r6, r5, r4, r3, r2, r1, r0 on the stack
! k3 passes bits to set in SR
! k4 passes bits to clear in SR
ENTRY(save_low_regs)
stc sr, r8 stc sr, r8
or k3, r8 or k3, r8
and k4, r8 and k4, r8
...@@ -565,6 +576,7 @@ ENTRY(handle_interrupt) ...@@ -565,6 +576,7 @@ ENTRY(handle_interrupt)
PREF(k0) PREF(k0)
! Save registers / Switch to bank 0 ! Save registers / Switch to bank 0
mov.l 1f, k4 ! SR bits to clear in k4
bsr save_regs ! needs original pr value in k3 bsr save_regs ! needs original pr value in k3
mov #-1, k2 ! default vector kept in k2 mov #-1, k2 ! default vector kept in k2
......
/*
* arch/sh/kernel/cpu/sh3/swsusp.S
*
* Copyright (C) 2009 Magnus Damm
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/sys.h>
#include <linux/errno.h>
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/page.h>
#define k0 r0
#define k1 r1
#define k2 r2
#define k3 r3
#define k4 r4
! swsusp_arch_resume()
! - copy restore_pblist pages
! - restore registers from swsusp_arch_regs_cpu0
ENTRY(swsusp_arch_resume)
mov.l 1f, r15
mov.l 2f, r4
mov.l @r4, r4
swsusp_copy_loop:
mov r4, r0
cmp/eq #0, r0
bt swsusp_restore_regs
mov.l @(PBE_ADDRESS, r4), r2
mov.l @(PBE_ORIG_ADDRESS, r4), r5
mov #(PAGE_SIZE >> 10), r3
shll8 r3
shlr2 r3 /* PAGE_SIZE / 16 */
swsusp_copy_page:
dt r3
mov.l @r2+,r1 /* 16n+0 */
mov.l r1,@r5
add #4,r5
mov.l @r2+,r1 /* 16n+4 */
mov.l r1,@r5
add #4,r5
mov.l @r2+,r1 /* 16n+8 */
mov.l r1,@r5
add #4,r5
mov.l @r2+,r1 /* 16n+12 */
mov.l r1,@r5
bf/s swsusp_copy_page
add #4,r5
bra swsusp_copy_loop
mov.l @(PBE_NEXT, r4), r4
swsusp_restore_regs:
! BL=0: R7->R0 is bank0
mov.l 3f, r8
mov.l 4f, r5
jsr @r5
nop
! BL=1: R7->R0 is bank1
lds k2, pr
ldc k3, ssr
mov.l @r15+, r0
mov.l @r15+, r1
mov.l @r15+, r2
mov.l @r15+, r3
mov.l @r15+, r4
mov.l @r15+, r5
mov.l @r15+, r6
mov.l @r15+, r7
rte
nop
! BL=0: R7->R0 is bank0
.align 2
1: .long swsusp_arch_regs_cpu0
2: .long restore_pblist
3: .long 0x20000000 ! RB=1
4: .long restore_regs
! swsusp_arch_suspend()
! - prepare pc for resume, return from function without swsusp_save on resume
! - save registers in swsusp_arch_regs_cpu0
! - call swsusp_save write suspend image
ENTRY(swsusp_arch_suspend)
sts pr, r0 ! save pr in r0
mov r15, r2 ! save sp in r2
mov r8, r5 ! save r8 in r5
stc sr, r1
ldc r1, ssr ! save sr in ssr
mov.l 1f, r1
ldc r1, spc ! setup pc value for resuming
mov.l 5f, r15 ! use swsusp_arch_regs_cpu0 as stack
mov.l 6f, r3
add r3, r15 ! save from top of structure
! BL=0: R7->R0 is bank0
mov.l 2f, r3 ! get new SR value for bank1
mov #0, r4
mov.l 7f, r1
jsr @r1 ! switch to bank1 and save bank1 r7->r0
not r4, r4
! BL=1: R7->R0 is bank1
stc r2_bank, k0 ! fetch old sp from r2_bank0
mov.l 3f, k4 ! SR bits to clear in k4
mov.l 8f, k1
jsr @k1 ! switch to bank0 and save all regs
stc r0_bank, k3 ! fetch old pr from r0_bank0
! BL=0: R7->R0 is bank0
mov r2, r15 ! restore old sp
mov r5, r8 ! restore old r8
stc ssr, r1
ldc r1, sr ! restore old sr
lds r0, pr ! restore old pr
mov.l 4f, r0
jmp @r0
nop
swsusp_call_save:
mov r2, r15 ! restore old sp
mov r5, r8 ! restore old r8
lds r0, pr ! restore old pr
rts
mov #0, r0
.align 2
1: .long swsusp_call_save
2: .long 0x20000000 ! RB=1
3: .long 0xdfffffff ! RB=0
4: .long swsusp_save
5: .long swsusp_arch_regs_cpu0
6: .long SWSUSP_ARCH_REGS_SIZE
7: .long save_low_regs
8: .long save_regs
...@@ -5,6 +5,7 @@ ...@@ -5,6 +5,7 @@
obj-y := probe.o common.o obj-y := probe.o common.o
common-y += $(addprefix ../sh3/, entry.o ex.o) common-y += $(addprefix ../sh3/, entry.o ex.o)
obj-$(CONFIG_HIBERNATION) += $(addprefix ../sh3/, swsusp.o)
obj-$(CONFIG_SH_FPU) += fpu.o softfloat.o obj-$(CONFIG_SH_FPU) += fpu.o softfloat.o
obj-$(CONFIG_SH_STORE_QUEUES) += sq.o obj-$(CONFIG_SH_STORE_QUEUES) += sq.o
......
/*
* swsusp.c - SuperH hibernation support
*
* Copyright (C) 2009 Magnus Damm
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/suspend.h>
#include <asm/suspend.h>
#include <asm/sections.h>
#include <asm/tlbflush.h>
#include <asm/page.h>
#include <asm/fpu.h>
struct swsusp_arch_regs swsusp_arch_regs_cpu0;
int pfn_is_nosave(unsigned long pfn)
{
unsigned long begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT;
unsigned long end_pfn = PAGE_ALIGN(__pa(&__nosave_end)) >> PAGE_SHIFT;
return (pfn >= begin_pfn) && (pfn < end_pfn);
}
void save_processor_state(void)
{
init_fpu(current);
}
void restore_processor_state(void)
{
local_flush_tlb_all();
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment