Commit 2eff7ec8 authored by Takashi Iwai's avatar Takashi Iwai Committed by Jaroslav Kysela

[ALSA] cmipci - Add Mic Boost capture switch

CMIPCI driver
Added 'Mic Boost Capture Switch' and 'Phone' switches.
The existing playback switch is renamed as 'Mic Boost Playback Switch'.
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 174d5220
......@@ -306,7 +306,7 @@ MODULE_PARM_DESC(joystick_port, "Joystick port address.");
#define CM_REG_FM_PCI 0x50
/*
* for CMI-8338 .. this is not valid for CMI-8738.
* access from SB-mixer port
*/
#define CM_REG_EXTENT_IND 0xf0
#define CM_VPHONE_MASK 0xe0 /* Phone volume control (0-3) << 5 */
......@@ -315,6 +315,7 @@ MODULE_PARM_DESC(joystick_port, "Joystick port address.");
#define CM_VSPKM 0x08 /* Speaker mute control, default high */
#define CM_RLOOPREN 0x04 /* Rec. R-channel enable */
#define CM_RLOOPLEN 0x02 /* Rec. L-channel enable */
#define CM_VADMIC3 0x01 /* Mic record boost */
/*
* CMI-8338 spec ver 0.5 (this is not valid for CMI-8738):
......@@ -2135,8 +2136,12 @@ static snd_kcontrol_new_t snd_cmipci_mixers[] __devinitdata = {
CMIPCI_MIXER_VOL_STEREO("Aux Playback Volume", CM_REG_AUX_VOL, 4, 0, 15),
CMIPCI_MIXER_SW_STEREO("Aux Playback Switch", CM_REG_MIXER2, CM_VAUXLM_SHIFT, CM_VAUXRM_SHIFT, 0),
CMIPCI_MIXER_SW_STEREO("Aux Capture Switch", CM_REG_MIXER2, CM_RAUXLEN_SHIFT, CM_RAUXREN_SHIFT, 0),
CMIPCI_MIXER_SW_MONO("Mic Boost", CM_REG_MIXER2, CM_MICGAINZ_SHIFT, 1),
CMIPCI_MIXER_SW_MONO("Mic Boost Playback Switch", CM_REG_MIXER2, CM_MICGAINZ_SHIFT, 1),
CMIPCI_MIXER_VOL_MONO("Mic Capture Volume", CM_REG_MIXER2, CM_VADMIC_SHIFT, 7),
CMIPCI_SB_VOL_MONO("Phone Playback Volume", CM_REG_EXTENT_IND, 5, 7),
CMIPCI_DOUBLE("Phone Playback Switch", CM_REG_EXTENT_IND, CM_REG_EXTENT_IND, 4, 4, 1, 0, 0),
CMIPCI_DOUBLE("PC Speaker Playnack Switch", CM_REG_EXTENT_IND, CM_REG_EXTENT_IND, 3, 3, 1, 0, 0),
CMIPCI_DOUBLE("Mic Boost Capture Switch", CM_REG_EXTENT_IND, CM_REG_EXTENT_IND, 0, 0, 1, 0, 0),
};
/*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment