ISDN: Convert usages of pcibios_* functions to pci_*

drivers/isdn/hisax/bkm_a8.c

@@ -278,8 +278,6 @@ sct_alloc_io(u_int adr, u_int len)
 static struct pci_dev *dev_a8 __initdata = NULL;
 static u16  sub_vendor_id __initdata = 0;
 static u16  sub_sys_id __initdata = 0;
-static u_char pci_bus __initdata = 0;
-static u_char pci_device_fn __initdata = 0;
 static u_char pci_irq __initdata = 0;
 
 #endif /* CONFIG_PCI */
@@ -328,8 +326,6 @@ setup_sct_quadro(struct IsdnCard *card)
 					return(0);
 				pci_ioaddr1 = pci_resource_start(dev_a8, 1);
 				pci_irq = dev_a8->irq;
-				pci_bus = dev_a8->bus->number;
-				pci_device_fn = dev_a8->devfn;
 				found = 1;
 				break;
 			}
@@ -342,20 +338,17 @@ setup_sct_quadro(struct IsdnCard *card)
 		}
 #ifdef ATTEMPT_PCI_REMAPPING
 /* HACK: PLX revision 1 bug: PLX address bit 7 must not be set */
-		pcibios_read_config_byte(pci_bus, pci_device_fn,
-			PCI_REVISION_ID, &pci_rev_id);
+		pci_read_config_byte(dev_a8, PCI_REVISION_ID, &pci_rev_id);
 		if ((pci_ioaddr1 & 0x80) && (pci_rev_id == 1)) {
 			printk(KERN_WARNING "HiSax: %s (%s): PLX rev 1, remapping required!\n",
 				CardType[card->typ],
 				sct_quadro_subtypes[cs->subtyp]);
 			/* Restart PCI negotiation */
-			pcibios_write_config_dword(pci_bus, pci_device_fn,
-				PCI_BASE_ADDRESS_1, (u_int) - 1);
+			pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, (u_int) - 1);
 			/* Move up by 0x80 byte */
 			pci_ioaddr1 += 0x80;
 			pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK;
-			pcibios_write_config_dword(pci_bus, pci_device_fn,
-				PCI_BASE_ADDRESS_1, pci_ioaddr1);
+			pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, pci_ioaddr1);
 			dev_a8->resource[ 1].start = pci_ioaddr1;
 		}
 #endif /* End HACK */
@@ -366,11 +359,11 @@ setup_sct_quadro(struct IsdnCard *card)
 		       sct_quadro_subtypes[cs->subtyp]);
 		return (0);
 	}
-	pcibios_read_config_dword(pci_bus, pci_device_fn, PCI_BASE_ADDRESS_1, &pci_ioaddr1);
-	pcibios_read_config_dword(pci_bus, pci_device_fn, PCI_BASE_ADDRESS_2, &pci_ioaddr2);
-	pcibios_read_config_dword(pci_bus, pci_device_fn, PCI_BASE_ADDRESS_3, &pci_ioaddr3);
-	pcibios_read_config_dword(pci_bus, pci_device_fn, PCI_BASE_ADDRESS_4, &pci_ioaddr4);
-	pcibios_read_config_dword(pci_bus, pci_device_fn, PCI_BASE_ADDRESS_5, &pci_ioaddr5);
+	pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_1, &pci_ioaddr1);
+	pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_2, &pci_ioaddr2);
+	pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_3, &pci_ioaddr3);
+	pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_4, &pci_ioaddr4);
+	pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_5, &pci_ioaddr5);
 	if (!pci_ioaddr1 || !pci_ioaddr2 || !pci_ioaddr3 || !pci_ioaddr4 || !pci_ioaddr5) {
 		printk(KERN_WARNING "HiSax: %s (%s): No IO base address(es)\n",
 		       CardType[card->typ],