Merge tag 'mfd_3.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

Pull MFD changes from Samuel Ortiz:
 - 4 new drivers: Freescale i.MX on-chip Anatop, Ricoh's RC5T583 and
   TI's TPS65090 and TPS65217.
 - New variants support (8420, 8520 ab9540), cleanups and bug fixes for
   the abx500 and db8500 ST-E chipsets.
 - Some minor fixes and update for the wm8994 from Mark.
 - The beginning of a long term TWL cleanup effort coming from the TI
   folks.
 - Various fixes and cleanups for the s5m, TPS659xx, pm860x, and MAX8997
   drivers.

Fix up trivial conflicts due to duplicate patches and header file
cleanups (<linux/device.h> removal etc).

* tag 'mfd_3.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (97 commits)
  gpio/twl: Add DT support to gpio-twl4030 driver
  gpio/twl: Allocate irq_desc dynamically for SPARSE_IRQ support
  mfd: Detach twl6040 from the pmic mfd driver
  mfd: Replace twl-* pr_ macros by the dev_ equivalent and do various cleanups
  mfd: Micro-optimization on twl4030 IRQ handler
  mfd: Make twl4030 SIH SPARSE_IRQ capable
  mfd: Move twl-core IRQ allocation into twl[4030|6030]-irq files
  mfd: Remove references already defineid in header file from twl-core
  mfd: Remove unneeded header from twl-core
  mfd: Make twl-core not depend on pdata->irq_base/end
  ARM: OMAP2+: board-omap4-*: Do not use anymore TWL6030_IRQ_BASE in board files
  mfd: Return twl6030_mmc_card_detect IRQ for board setup
  Revert "mfd: Add platform data for MAX8997 haptic driver"
  mfd: Add support for TPS65090
  mfd: Add some da9052-i2c section annotations
  mfd: Build rtc5t583 only if I2C config is selected to y.
  mfd: Add anatop mfd driver
  mfd: Fix compilation error in tps65910.h
  mfd: Add 8420 variant to db8500-prcmu
  mfd: Add 8520 PRCMU variant to db8500-prcmu
  ...

Documentation/devicetree/bindings/gpio/gpio-twl4030.txt

+twl4030 GPIO controller bindings
+
+Required properties:
+- compatible:
+  - "ti,twl4030-gpio" for twl4030 GPIO controller
+- #gpio-cells : Should be two.
+  - first cell is the pin number
+  - second cell is used to specify optional parameters (unused)
+- gpio-controller : Marks the device node as a GPIO controller.
+- #interrupt-cells : Should be 2.
+- interrupt-controller: Mark the device node as an interrupt controller
+  The first cell is the GPIO number.
+  The second cell is not used.
+
+Example:
+
+twl_gpio: gpio {
+    compatible = "ti,twl4030-gpio";
+    #gpio-cells = <2>;
+    gpio-controller;
+    #interrupt-cells = <2>;
+    interrupt-controller;
+};

arch/arm/mach-omap2/board-4430sdp.c

@@ -490,21 +490,22 @@ static struct platform_device omap_vwlan_device = {
 
 static int omap4_twl6030_hsmmc_late_init(struct device *dev)
 {
-	int ret = 0;
+	int irq = 0;
 	struct platform_device *pdev = container_of(dev,
 				struct platform_device, dev);
 	struct omap_mmc_platform_data *pdata = dev->platform_data;
 
 	/* Setting MMC1 Card detect Irq */
 	if (pdev->id == 0) {
-		ret = twl6030_mmc_card_detect_config();
-		if (ret)
+		irq = twl6030_mmc_card_detect_config();
+		if (irq < 0) {
 			pr_err("Failed configuring MMC1 card detect\n");
-		pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE +
-						MMCDETECT_INTR_OFFSET;
+			return irq;
+		}
+		pdata->slots[0].card_detect_irq = irq;
 		pdata->slots[0].card_detect = twl6030_mmc_card_detect;
 	}
-	return ret;
+	return 0;
 }
 
 static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)

arch/arm/mach-omap2/board-omap4panda.c

@@ -238,7 +238,7 @@ struct wl12xx_platform_data omap_panda_wlan_data  __initdata = {
 
 static int omap4_twl6030_hsmmc_late_init(struct device *dev)
 {
-	int ret = 0;
+	int irq = 0;
 	struct platform_device *pdev = container_of(dev,
 				struct platform_device, dev);
 	struct omap_mmc_platform_data *pdata = dev->platform_data;
@@ -249,14 +249,15 @@ static int omap4_twl6030_hsmmc_late_init(struct device *dev)
 	}
 	/* Setting MMC1 Card detect Irq */
 	if (pdev->id == 0) {
-		ret = twl6030_mmc_card_detect_config();
-		 if (ret)
+		irq = twl6030_mmc_card_detect_config();
+		if (irq < 0) {
 			dev_err(dev, "%s: Error card detect config(%d)\n",
-				__func__, ret);
-		 else
-			pdata->slots[0].card_detect = twl6030_mmc_card_detect;
+				__func__, irq);
+			return irq;
+		}
+		pdata->slots[0].card_detect = twl6030_mmc_card_detect;
 	}
-	return ret;
+	return 0;
 }
 
 static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)

arch/arm/mach-s3c64xx/mach-crag6410-module.c

@@ -17,6 +17,8 @@
 #include <linux/mfd/wm831x/gpio.h>
 #include <linux/mfd/wm8994/pdata.h>
 
+#include <linux/regulator/machine.h>
+
 #include <sound/wm5100.h>
 #include <sound/wm8996.h>
 #include <sound/wm8962.h>
@@ -153,6 +155,14 @@ static const struct i2c_board_info wm1259_devs[] = {
 	},
 };
 
+static struct regulator_init_data wm8994_ldo1 = {
+	.supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data wm8994_ldo2 = {
+	.supply_regulator = "WALLVDD",
+};
+
 static struct wm8994_pdata wm8994_pdata = {
 	.gpio_base = CODEC_GPIO_BASE,
 	.gpio_defaults = {
@@ -160,8 +170,8 @@ static struct wm8994_pdata wm8994_pdata = {
 	},
 	.irq_base = CODEC_IRQ_BASE,
 	.ldo = {
-		{ .supply = "WALLVDD" },
-		{ .supply = "WALLVDD" },
+		 { .init_data = &wm8994_ldo1, },
+		 { .init_data = &wm8994_ldo2, },
 	},
 };
 

arch/arm/mach-ux500/include/mach/irqs-board-mop500.h

@@ -13,7 +13,7 @@
 
 #define MOP500_AB8500_IRQ_BASE		IRQ_BOARD_START
 #define MOP500_AB8500_IRQ_END		(MOP500_AB8500_IRQ_BASE \
-					 + AB8500_NR_IRQS)
+					 + AB8500_MAX_NR_IRQS)
 
 /* TC35892 */
 #define TC35892_NR_INTERNAL_IRQS	8

drivers/cpufreq/db8500-cpufreq.c

@@ -22,11 +22,11 @@ static struct cpufreq_frequency_table freq_table[] = {
 	},
 	[1] = {
 		.index = 1,
-		.frequency = 300000,
+		.frequency = 400000,
 	},
 	[2] = {
 		.index = 2,
-		.frequency = 600000,
+		.frequency = 800000,
 	},
 	[3] = {
 		/* Used for MAX_OPP, if available */
@@ -113,12 +113,9 @@ static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy)
 
 	BUILD_BUG_ON(ARRAY_SIZE(idx2opp) + 1 != ARRAY_SIZE(freq_table));
 
-	if (!prcmu_is_u8400()) {
-		freq_table[1].frequency = 400000;
-		freq_table[2].frequency = 800000;
-		if (prcmu_has_arm_maxopp())
-			freq_table[3].frequency = 1000000;
-	}
+	if (prcmu_has_arm_maxopp())
+		freq_table[3].frequency = 1000000;
+
 	pr_info("db8500-cpufreq : Available frequencies:\n");
 	for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++)
 		pr_info("  %d Mhz\n", freq_table[i].frequency/1000);

drivers/gpio/gpio-stmpe.c

@@ -307,13 +307,11 @@ static int __devinit stmpe_gpio_probe(struct platform_device *pdev)
 	struct stmpe_gpio_platform_data *pdata;
 	struct stmpe_gpio *stmpe_gpio;
 	int ret;
-	int irq;
+	int irq = 0;
 
 	pdata = stmpe->pdata->gpio;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
-		return irq;
 
 	stmpe_gpio = kzalloc(sizeof(struct stmpe_gpio), GFP_KERNEL);
 	if (!stmpe_gpio)
@@ -330,21 +328,28 @@ static int __devinit stmpe_gpio_probe(struct platform_device *pdev)
 	stmpe_gpio->chip.dev = &pdev->dev;
 	stmpe_gpio->chip.base = pdata ? pdata->gpio_base : -1;
 
-	stmpe_gpio->irq_base = stmpe->irq_base + STMPE_INT_GPIO(0);
+	if (irq >= 0)
+		stmpe_gpio->irq_base = stmpe->irq_base + STMPE_INT_GPIO(0);
+	else
+		dev_info(&pdev->dev,
+			"device configured in no-irq mode; "
+			"irqs are not available\n");
 
 	ret = stmpe_enable(stmpe, STMPE_BLOCK_GPIO);
 	if (ret)
 		goto out_free;
 
-	ret = stmpe_gpio_irq_init(stmpe_gpio);
-	if (ret)
-		goto out_disable;
+	if (irq >= 0) {
+		ret = stmpe_gpio_irq_init(stmpe_gpio);
+		if (ret)
+			goto out_disable;
 
-	ret = request_threaded_irq(irq, NULL, stmpe_gpio_irq, IRQF_ONESHOT,
-				   "stmpe-gpio", stmpe_gpio);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
-		goto out_removeirq;
+		ret = request_threaded_irq(irq, NULL, stmpe_gpio_irq,
+				IRQF_ONESHOT, "stmpe-gpio", stmpe_gpio);
+		if (ret) {
+			dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
+			goto out_removeirq;
+		}
 	}
 
 	ret = gpiochip_add(&stmpe_gpio->chip);
@@ -361,9 +366,11 @@ static int __devinit stmpe_gpio_probe(struct platform_device *pdev)
 	return 0;
 
 out_freeirq:
-	free_irq(irq, stmpe_gpio);
+	if (irq >= 0)
+		free_irq(irq, stmpe_gpio);
 out_removeirq:
-	stmpe_gpio_irq_remove(stmpe_gpio);
+	if (irq >= 0)
+		stmpe_gpio_irq_remove(stmpe_gpio);
 out_disable:
 	stmpe_disable(stmpe, STMPE_BLOCK_GPIO);
 out_free:
@@ -391,8 +398,10 @@ static int __devexit stmpe_gpio_remove(struct platform_device *pdev)
 
 	stmpe_disable(stmpe, STMPE_BLOCK_GPIO);
 
-	free_irq(irq, stmpe_gpio);
-	stmpe_gpio_irq_remove(stmpe_gpio);
+	if (irq >= 0) {
+		free_irq(irq, stmpe_gpio);
+		stmpe_gpio_irq_remove(stmpe_gpio);
+	}
 	platform_set_drvdata(pdev, NULL);
 	kfree(stmpe_gpio);
 

drivers/gpio/gpio-twl4030.c

@@ -32,6 +32,8 @@
 #include <linux/irq.h>
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/irqdomain.h>
 
 #include <linux/i2c/twl.h>
 
@@ -256,7 +258,8 @@ static int twl_request(struct gpio_chip *chip, unsigned offset)
 		 * and vMMC2 power supplies based on card presence.
 		 */
 		pdata = chip->dev->platform_data;
-		value |= pdata->mmc_cd & 0x03;
+		if (pdata)
+			value |= pdata->mmc_cd & 0x03;
 
 		status = gpio_twl4030_write(REG_GPIO_CTRL, value);
 	}
@@ -395,59 +398,70 @@ static int gpio_twl4030_remove(struct platform_device *pdev);
 static int __devinit gpio_twl4030_probe(struct platform_device *pdev)
 {
 	struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data;
-	int ret;
+	struct device_node *node = pdev->dev.of_node;
+	int ret, irq_base;
 
 	/* maybe setup IRQs */
-	if (pdata->irq_base) {
-		if (is_module()) {
-			dev_err(&pdev->dev,
-				"can't dispatch IRQs from modules\n");
-			goto no_irqs;
-		}
-		ret = twl4030_sih_setup(TWL4030_MODULE_GPIO);
-		if (ret < 0)
-			return ret;
-		WARN_ON(ret != pdata->irq_base);
-		twl4030_gpio_irq_base = ret;
+	if (is_module()) {
+		dev_err(&pdev->dev, "can't dispatch IRQs from modules\n");
+		goto no_irqs;
+	}
+
+	irq_base = irq_alloc_descs(-1, 0, TWL4030_GPIO_MAX, 0);
+	if (irq_base < 0) {
+		dev_err(&pdev->dev, "Failed to alloc irq_descs\n");
+		return irq_base;
 	}
 
+	irq_domain_add_legacy(node, TWL4030_GPIO_MAX, irq_base, 0,
+			      &irq_domain_simple_ops, NULL);
+
+	ret = twl4030_sih_setup(&pdev->dev, TWL4030_MODULE_GPIO, irq_base);
+	if (ret < 0)
+		return ret;
+
+	twl4030_gpio_irq_base = irq_base;
+
 no_irqs:
-	/*
-	 * NOTE:  boards may waste power if they don't set pullups
-	 * and pulldowns correctly ... default for non-ULPI pins is
-	 * pulldown, and some other pins may have external pullups
-	 * or pulldowns.  Careful!
-	 */
-	ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns);
-	if (ret)
-		dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n",
-				pdata->pullups, pdata->pulldowns,
-				ret);
-
-	ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd);
-	if (ret)
-		dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n",
-				pdata->debounce, pdata->mmc_cd,
-				ret);
-
-	twl_gpiochip.base = pdata->gpio_base;
+	twl_gpiochip.base = -1;
 	twl_gpiochip.ngpio = TWL4030_GPIO_MAX;
 	twl_gpiochip.dev = &pdev->dev;
 
-	/* NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE,
-	 * is (still) clear if use_leds is set.
-	 */
-	if (pdata->use_leds)
-		twl_gpiochip.ngpio += 2;
+	if (pdata) {
+		twl_gpiochip.base = pdata->gpio_base;
+
+		/*
+		 * NOTE:  boards may waste power if they don't set pullups
+		 * and pulldowns correctly ... default for non-ULPI pins is
+		 * pulldown, and some other pins may have external pullups
+		 * or pulldowns.  Careful!
+		 */
+		ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns);
+		if (ret)
+			dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n",
+					pdata->pullups, pdata->pulldowns,
+					ret);
+
+		ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd);
+		if (ret)
+			dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n",
+					pdata->debounce, pdata->mmc_cd,
+					ret);
+
+		/*
+		 * NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE,
+		 * is (still) clear if use_leds is set.
+		 */
+		if (pdata->use_leds)
+			twl_gpiochip.ngpio += 2;
+	}
 
 	ret = gpiochip_add(&twl_gpiochip);
 	if (ret < 0) {
-		dev_err(&pdev->dev,
-				"could not register gpiochip, %d\n",
-				ret);
+		dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret);
 		twl_gpiochip.ngpio = 0;
 		gpio_twl4030_remove(pdev);
-	} else if (pdata->setup) {
+	} else if (pdata && pdata->setup) {
 		int status;
 
 		status = pdata->setup(&pdev->dev,
@@ -465,7 +479,7 @@ static int gpio_twl4030_remove(struct platform_device *pdev)
 	struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data;
 	int status;
 
-	if (pdata->teardown) {
+	if (pdata && pdata->teardown) {
 		status = pdata->teardown(&pdev->dev,
 				pdata->gpio_base, TWL4030_GPIO_MAX);
 		if (status) {
@@ -486,12 +500,21 @@ static int gpio_twl4030_remove(struct platform_device *pdev)
 	return -EIO;
 }
 
+static const struct of_device_id twl_gpio_match[] = {
+	{ .compatible = "ti,twl4030-gpio", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, twl_gpio_match);
+
 /* Note:  this hardware lives inside an I2C-based multi-function device. */
 MODULE_ALIAS("platform:twl4030_gpio");
 
 static struct platform_driver gpio_twl4030_driver = {
-	.driver.name	= "twl4030_gpio",
-	.driver.owner	= THIS_MODULE,
+	.driver = {
+		.name	= "twl4030_gpio",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(twl_gpio_match),
+	},
 	.probe		= gpio_twl4030_probe,
 	.remove		= gpio_twl4030_remove,
 };

drivers/hwmon/mc13783-adc.c

@@ -59,7 +59,7 @@ static int mc13783_adc_read(struct device *dev,
 
 	ret = mc13xxx_adc_do_conversion(priv->mc13xxx,
 			MC13XXX_ADC_MODE_MULT_CHAN,
-			channel, sample);
+			channel, 0, 0, sample);
 	if (ret)
 		return ret;
 

drivers/input/misc/88pm860x_onkey.c

@@ -105,6 +105,8 @@ static int __devinit pm860x_onkey_probe(struct platform_device *pdev)
 	}
 
 	platform_set_drvdata(pdev, info);
+	device_init_wakeup(&pdev->dev, 1);
+
 	return 0;
 
 out_irq:
@@ -129,10 +131,34 @@ static int __devexit pm860x_onkey_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int pm860x_onkey_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+
+	if (device_may_wakeup(dev))
+		chip->wakeup_flag |= 1 << PM8607_IRQ_ONKEY;
+	return 0;
+}
+static int pm860x_onkey_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+
+	if (device_may_wakeup(dev))
+		chip->wakeup_flag &= ~(1 << PM8607_IRQ_ONKEY);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pm860x_onkey_pm_ops, pm860x_onkey_suspend, pm860x_onkey_resume);
+
 static struct platform_driver pm860x_onkey_driver = {
 	.driver		= {
 		.name	= "88pm860x-onkey",
 		.owner	= THIS_MODULE,
+		.pm	= &pm860x_onkey_pm_ops,
 	},
 	.probe		= pm860x_onkey_probe,
 	.remove		= __devexit_p(pm860x_onkey_remove),

drivers/input/touchscreen/mc13783_ts.c

@@ -39,6 +39,7 @@ struct mc13783_ts_priv {
 	struct delayed_work work;
 	struct workqueue_struct *workq;
 	unsigned int sample[4];
+	struct mc13xxx_ts_platform_data *touch;
 };
 
 static irqreturn_t mc13783_ts_handler(int irq, void *data)
@@ -125,7 +126,9 @@ static void mc13783_ts_work(struct work_struct *work)
 	unsigned int channel = 12;
 
 	if (mc13xxx_adc_do_conversion(priv->mc13xxx,
-				mode, channel, priv->sample) == 0)
+				mode, channel,
+				priv->touch->ato, priv->touch->atox,
+				priv->sample) == 0)
 		mc13783_ts_report_sample(priv);
 }
 
@@ -179,6 +182,12 @@ static int __init mc13783_ts_probe(struct platform_device *pdev)
 	INIT_DELAYED_WORK(&priv->work, mc13783_ts_work);
 	priv->mc13xxx = dev_get_drvdata(pdev->dev.parent);
 	priv->idev = idev;
+	priv->touch = dev_get_platdata(&pdev->dev);
+	if (!priv->touch) {
+		dev_err(&pdev->dev, "missing platform data\n");
+		ret = -ENODEV;
+		goto err_free_mem;
+	}
 
 	/*
 	 * We need separate workqueue because mc13783_adc_do_conversion

drivers/leds/leds-88pm860x.c

@@ -114,6 +114,27 @@ static inline int __blink_ctl_mask(int port)
 	return ret;
 }
 
+static int led_power_set(struct pm860x_chip *chip, int port, int on)
+{
+	int ret = -EINVAL;
+
+	switch (port) {
+	case PM8606_LED1_RED:
+	case PM8606_LED1_GREEN:
+	case PM8606_LED1_BLUE:
+		ret = on ? pm8606_osc_enable(chip, RGB1_ENABLE) :
+			pm8606_osc_disable(chip, RGB1_ENABLE);
+		break;
+	case PM8606_LED2_RED:
+	case PM8606_LED2_GREEN:
+	case PM8606_LED2_BLUE:
+		ret = on ? pm8606_osc_enable(chip, RGB2_ENABLE) :
+			pm8606_osc_disable(chip, RGB2_ENABLE);
+		break;
+	}
+	return ret;
+}
+
 static void pm860x_led_work(struct work_struct *work)
 {
 
@@ -126,6 +147,7 @@ static void pm860x_led_work(struct work_struct *work)
 	chip = led->chip;
 	mutex_lock(&led->lock);
 	if ((led->current_brightness == 0) && led->brightness) {
+		led_power_set(chip, led->port, 1);
 		if (led->iset) {
 			pm860x_set_bits(led->i2c, __led_off(led->port),
 					LED_CURRENT_MASK, led->iset);
@@ -149,6 +171,7 @@ static void pm860x_led_work(struct work_struct *work)
 					LED_CURRENT_MASK, 0);
 			mask = __blink_ctl_mask(led->port);
 			pm860x_set_bits(led->i2c, PM8606_WLED3B, mask, 0);
+			led_power_set(chip, led->port, 0);
 		}
 	}
 	led->current_brightness = led->brightness;

drivers/mfd/88pm860x-core.c

@@ -503,6 +503,101 @@ static void device_irq_exit(struct pm860x_chip *chip)
 		free_irq(chip->core_irq, chip);
 }
 
+int pm8606_osc_enable(struct pm860x_chip *chip, unsigned short client)
+{
+	int ret = -EIO;
+	struct i2c_client *i2c = (chip->id == CHIP_PM8606) ?
+		chip->client : chip->companion;
+
+	dev_dbg(chip->dev, "%s(B): client=0x%x\n", __func__, client);
+	dev_dbg(chip->dev, "%s(B): vote=0x%x status=%d\n",
+			__func__, chip->osc_vote,
+			chip->osc_status);
+
+	mutex_lock(&chip->osc_lock);
+	/* Update voting status */
+	chip->osc_vote |= client;
+	/* If reference group is off - turn on*/
+	if (chip->osc_status != PM8606_REF_GP_OSC_ON) {
+		chip->osc_status = PM8606_REF_GP_OSC_UNKNOWN;
+		/* Enable Reference group Vsys */
+		if (pm860x_set_bits(i2c, PM8606_VSYS,
+				PM8606_VSYS_EN, PM8606_VSYS_EN))
+			goto out;
+
+		/*Enable Internal Oscillator */
+		if (pm860x_set_bits(i2c, PM8606_MISC,
+				PM8606_MISC_OSC_EN, PM8606_MISC_OSC_EN))
+			goto out;
+		/* Update status (only if writes succeed) */
+		chip->osc_status = PM8606_REF_GP_OSC_ON;
+	}
+	mutex_unlock(&chip->osc_lock);
+
+	dev_dbg(chip->dev, "%s(A): vote=0x%x status=%d ret=%d\n",
+			__func__, chip->osc_vote,
+			chip->osc_status, ret);
+	return 0;
+out:
+	mutex_unlock(&chip->osc_lock);
+	return ret;
+}
+EXPORT_SYMBOL(pm8606_osc_enable);
+
+int pm8606_osc_disable(struct pm860x_chip *chip, unsigned short client)
+{
+	int ret = -EIO;
+	struct i2c_client *i2c = (chip->id == CHIP_PM8606) ?
+		chip->client : chip->companion;
+
+	dev_dbg(chip->dev, "%s(B): client=0x%x\n", __func__, client);
+	dev_dbg(chip->dev, "%s(B): vote=0x%x status=%d\n",
+			__func__, chip->osc_vote,
+			chip->osc_status);
+
+	mutex_lock(&chip->osc_lock);
+	/*Update voting status */
+	chip->osc_vote &= ~(client);
+	/* If reference group is off and this is the last client to release
+	 * - turn off */
+	if ((chip->osc_status != PM8606_REF_GP_OSC_OFF) &&
+			(chip->osc_vote == REF_GP_NO_CLIENTS)) {
+		chip->osc_status = PM8606_REF_GP_OSC_UNKNOWN;
+		/* Disable Reference group Vsys */
+		if (pm860x_set_bits(i2c, PM8606_VSYS, PM8606_VSYS_EN, 0))
+			goto out;
+		/* Disable Internal Oscillator */
+		if (pm860x_set_bits(i2c, PM8606_MISC, PM8606_MISC_OSC_EN, 0))
+			goto out;
+		chip->osc_status = PM8606_REF_GP_OSC_OFF;
+	}
+	mutex_unlock(&chip->osc_lock);
+
+	dev_dbg(chip->dev, "%s(A): vote=0x%x status=%d ret=%d\n",
+			__func__, chip->osc_vote,
+			chip->osc_status, ret);
+	return 0;
+out:
+	mutex_unlock(&chip->osc_lock);
+	return ret;
+}
+EXPORT_SYMBOL(pm8606_osc_disable);
+
+static void __devinit device_osc_init(struct i2c_client *i2c)
+{
+	struct pm860x_chip *chip = i2c_get_clientdata(i2c);
+
+	mutex_init(&chip->osc_lock);
+	/* init portofino reference group voting and status */
+	/* Disable Reference group Vsys */
+	pm860x_set_bits(i2c, PM8606_VSYS, PM8606_VSYS_EN, 0);
+	/* Disable Internal Oscillator */
+	pm860x_set_bits(i2c, PM8606_MISC, PM8606_MISC_OSC_EN, 0);
+
+	chip->osc_vote = REF_GP_NO_CLIENTS;
+	chip->osc_status = PM8606_REF_GP_OSC_OFF;
+}
+
 static void __devinit device_bk_init(struct pm860x_chip *chip,
 				     struct pm860x_platform_data *pdata)
 {
@@ -767,6 +862,15 @@ static void __devinit device_8607_init(struct pm860x_chip *chip,
 	return;
 }
 
+static void __devinit device_8606_init(struct pm860x_chip *chip,
+				       struct i2c_client *i2c,
+				       struct pm860x_platform_data *pdata)
+{
+	device_osc_init(i2c);
+	device_bk_init(chip, pdata);
+	device_led_init(chip, pdata);
+}
+
 int __devinit pm860x_device_init(struct pm860x_chip *chip,
 		       struct pm860x_platform_data *pdata)
 {
@@ -774,8 +878,7 @@ int __devinit pm860x_device_init(struct pm860x_chip *chip,
 
 	switch (chip->id) {
 	case CHIP_PM8606:
-		device_bk_init(chip, pdata);
-		device_led_init(chip, pdata);
+		device_8606_init(chip, chip->client, pdata);
 		break;
 	case CHIP_PM8607:
 		device_8607_init(chip, chip->client, pdata);
@@ -785,8 +888,7 @@ int __devinit pm860x_device_init(struct pm860x_chip *chip,
 	if (chip->companion) {
 		switch (chip->id) {
 		case CHIP_PM8607:
-			device_bk_init(chip, pdata);
-			device_led_init(chip, pdata);
+			device_8606_init(chip, chip->companion, pdata);
 			break;
 		case CHIP_PM8606:
 			device_8607_init(chip, chip->companion, pdata);

drivers/mfd/88pm860x-i2c.c

@@ -334,10 +334,35 @@ static int __devexit pm860x_remove(struct i2c_client *client)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int pm860x_suspend(struct device *dev)
+{
+	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+	struct pm860x_chip *chip = i2c_get_clientdata(client);
+
+	if (device_may_wakeup(dev) && chip->wakeup_flag)
+		enable_irq_wake(chip->core_irq);
+	return 0;
+}
+
+static int pm860x_resume(struct device *dev)
+{
+	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+	struct pm860x_chip *chip = i2c_get_clientdata(client);
+
+	if (device_may_wakeup(dev) && chip->wakeup_flag)
+		disable_irq_wake(chip->core_irq);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pm860x_pm_ops, pm860x_suspend, pm860x_resume);
+
 static struct i2c_driver pm860x_driver = {
 	.driver	= {
 		.name	= "88PM860x",
 		.owner	= THIS_MODULE,
+		.pm     = &pm860x_pm_ops,
 	},
 	.probe		= pm860x_probe,
 	.remove		= __devexit_p(pm860x_remove),

drivers/mfd/Kconfig

@@ -143,6 +143,21 @@ config TPS6507X
 	  This driver can also be built as a module.  If so, the module
 	  will be called tps6507x.
 
+config MFD_TPS65217
+	tristate "TPS65217 Power Management / White LED chips"
+	depends on I2C
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for the TPS65217 series of
+	  Power Management / White LED chips.
+	  These include voltage regulators, lithium ion/polymer battery
+	  charger, wled and other features that are often used in portable
+	  devices.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called tps65217.
+
 config MFD_TPS6586X
 	bool "TPS6586x Power Management chips"
 	depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
@@ -162,6 +177,7 @@ config MFD_TPS65910
 	depends on I2C=y && GPIOLIB
 	select MFD_CORE
 	select GPIO_TPS65910
+	select REGMAP_I2C
 	help
 	  if you say yes here you get support for the TPS65910 series of
 	  Power Management chips.
@@ -171,7 +187,7 @@ config MFD_TPS65912
 	depends on GPIOLIB
 
 config MFD_TPS65912_I2C
-	bool "TPS95612 Power Management chip with I2C"
+	bool "TPS65912 Power Management chip with I2C"
 	select MFD_CORE
 	select MFD_TPS65912
 	depends on I2C=y && GPIOLIB
@@ -400,7 +416,7 @@ config MFD_MAX8997
 	depends on I2C=y && GENERIC_HARDIRQS
 	select MFD_CORE
 	help
-	  Say yes here to support for Maxim Semiconductor MAX8998/8966.
+	  Say yes here to support for Maxim Semiconductor MAX8997/8966.
 	  This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
 	  MUIC controls on chip.
 	  This driver provides common support for accessing the device;
@@ -812,6 +828,18 @@ config MFD_PM8XXX_IRQ
 config TPS65911_COMPARATOR
 	tristate
 
+config MFD_TPS65090
+	bool "TPS65090 Power Management chips"
+	depends on I2C=y && GENERIC_HARDIRQS
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for the TPS65090 series of
+	  Power Management chips.
+	  This driver provides common support for accessing the device,
+	  additional drivers must be enabled in order to use the
+	  functionality of the device.
+
 config MFD_AAT2870_CORE
 	bool "Support for the AnalogicTech AAT2870"
 	select MFD_CORE
@@ -831,6 +859,28 @@ config MFD_INTEL_MSIC
 	  Passage) chip. This chip embeds audio, battery, GPIO, etc.
 	  devices used in Intel Medfield platforms.
 
+config MFD_RC5T583
+	bool "Ricoh RC5T583 Power Management system device"
+	depends on I2C=y && GENERIC_HARDIRQS
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  Select this option to get support for the RICOH583 Power
+	  Management system device.
+	  This driver provides common support for accessing the device
+	  through i2c interface. The device supports multiple sub-devices
+	  like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
+	  Additional drivers must be enabled in order to use the
+	  different functionality of the device.
+
+config MFD_ANATOP
+	bool "Support for Freescale i.MX on-chip ANATOP controller"
+	depends on SOC_IMX6Q
+	help
+	  Select this option to enable Freescale i.MX on-chip ANATOP
+	  MFD controller. This controller embeds regulator and
+	  thermal devices for Freescale i.MX platforms.
+
 endmenu
 endif
 

drivers/mfd/Makefile

@@ -38,6 +38,7 @@ obj-$(CONFIG_MFD_WM8994)	+= wm8994-core.o wm8994-irq.o wm8994-regmap.o
 obj-$(CONFIG_TPS6105X)		+= tps6105x.o
 obj-$(CONFIG_TPS65010)		+= tps65010.o
 obj-$(CONFIG_TPS6507X)		+= tps6507x.o
+obj-$(CONFIG_MFD_TPS65217)	+= tps65217.o
 obj-$(CONFIG_MFD_TPS65910)	+= tps65910.o tps65910-irq.o
 tps65912-objs                   := tps65912-core.o tps65912-irq.o
 obj-$(CONFIG_MFD_TPS65912)	+= tps65912.o
@@ -109,6 +110,9 @@ obj-$(CONFIG_MFD_OMAP_USB_HOST)	+= omap-usb-host.o
 obj-$(CONFIG_MFD_PM8921_CORE) 	+= pm8921-core.o
 obj-$(CONFIG_MFD_PM8XXX_IRQ) 	+= pm8xxx-irq.o
 obj-$(CONFIG_TPS65911_COMPARATOR)	+= tps65911-comparator.o
+obj-$(CONFIG_MFD_TPS65090)	+= tps65090.o
 obj-$(CONFIG_MFD_AAT2870_CORE)	+= aat2870-core.o
 obj-$(CONFIG_MFD_INTEL_MSIC)	+= intel_msic.o
+obj-$(CONFIG_MFD_RC5T583)	+= rc5t583.o rc5t583-irq.o
 obj-$(CONFIG_MFD_S5M_CORE)	+= s5m-core.o s5m-irq.o
+obj-$(CONFIG_MFD_ANATOP)	+= anatop-mfd.o

drivers/mfd/ab8500-i2c.c

@@ -11,7 +11,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/abx500/ab8500.h>
-#include <linux/mfd/db8500-prcmu.h>
+#include <linux/mfd/dbx500-prcmu.h>
 
 static int ab8500_i2c_write(struct ab8500 *ab8500, u16 addr, u8 data)
 {
@@ -23,6 +23,18 @@ static int ab8500_i2c_write(struct ab8500 *ab8500, u16 addr, u8 data)
 	return ret;
 }
 
+static int ab8500_i2c_write_masked(struct ab8500 *ab8500, u16 addr, u8 mask,
+	u8 data)
+{
+	int ret;
+
+	ret = prcmu_abb_write_masked((u8)(addr >> 8), (u8)(addr & 0xFF), &data,
+		&mask, 1);
+	if (ret < 0)
+		dev_err(ab8500->dev, "prcmu i2c error %d\n", ret);
+	return ret;
+}
+
 static int ab8500_i2c_read(struct ab8500 *ab8500, u16 addr)
 {
 	int ret;
@@ -38,6 +50,7 @@ static int ab8500_i2c_read(struct ab8500 *ab8500, u16 addr)
 
 static int __devinit ab8500_i2c_probe(struct platform_device *plf)
 {
+	const struct platform_device_id *platid = platform_get_device_id(plf);
 	struct ab8500 *ab8500;
 	struct resource *resource;
 	int ret;
@@ -58,13 +71,15 @@ static int __devinit ab8500_i2c_probe(struct platform_device *plf)
 
 	ab8500->read = ab8500_i2c_read;
 	ab8500->write = ab8500_i2c_write;
+	ab8500->write_masked = ab8500_i2c_write_masked;
 
 	platform_set_drvdata(plf, ab8500);
 
-	ret = ab8500_init(ab8500);
+	ret = ab8500_init(ab8500, platid->driver_data);
 	if (ret)
 		kfree(ab8500);
 
+
 	return ret;
 }
 
@@ -78,13 +93,22 @@ static int __devexit ab8500_i2c_remove(struct platform_device *plf)
 	return 0;
 }
 
+static const struct platform_device_id ab8500_id[] = {
+	{ "ab8500-i2c", AB8500_VERSION_AB8500 },
+	{ "ab8505-i2c", AB8500_VERSION_AB8505 },
+	{ "ab9540-i2c", AB8500_VERSION_AB9540 },
+	{ "ab8540-i2c", AB8500_VERSION_AB8540 },
+	{ }
+};
+
 static struct platform_driver ab8500_i2c_driver = {
 	.driver = {
 		.name = "ab8500-i2c",
 		.owner = THIS_MODULE,
 	},
 	.probe	= ab8500_i2c_probe,
-	.remove	= __devexit_p(ab8500_i2c_remove)
+	.remove	= __devexit_p(ab8500_i2c_remove),
+	.id_table = ab8500_id,
 };
 
 static int __init ab8500_i2c_init(void)

drivers/mfd/anatop-mfd.c

+/*
+ * Anatop MFD driver
+ *
+ * Copyright (C) 2012 Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
+ * Copyright (C) 2012 Linaro
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/mfd/anatop.h>
+
+u32 anatop_get_bits(struct anatop *adata, u32 addr, int bit_shift,
+		    int bit_width)
+{
+	u32 val, mask;
+
+	if (bit_width == 32)
+		mask = ~0;
+	else
+		mask = (1 << bit_width) - 1;
+
+	val = readl(adata->ioreg + addr);
+	val = (val >> bit_shift) & mask;
+
+	return val;
+}
+EXPORT_SYMBOL_GPL(anatop_get_bits);
+
+void anatop_set_bits(struct anatop *adata, u32 addr, int bit_shift,
+		     int bit_width, u32 data)
+{
+	u32 val, mask;
+
+	if (bit_width == 32)
+		mask = ~0;
+	else
+		mask = (1 << bit_width) - 1;
+
+	spin_lock(&adata->reglock);
+	val = readl(adata->ioreg + addr) & ~(mask << bit_shift);
+	writel((data << bit_shift) | val, adata->ioreg + addr);
+	spin_unlock(&adata->reglock);
+}
+EXPORT_SYMBOL_GPL(anatop_set_bits);
+
+static const struct of_device_id of_anatop_match[] = {
+	{ .compatible = "fsl,imx6q-anatop", },
+	{ },
+};
+
+static int __devinit of_anatop_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	void *ioreg;
+	struct anatop *drvdata;
+
+	ioreg = of_iomap(np, 0);
+	if (!ioreg)
+		return -EADDRNOTAVAIL;
+	drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+	drvdata->ioreg = ioreg;
+	spin_lock_init(&drvdata->reglock);
+	platform_set_drvdata(pdev, drvdata);
+	of_platform_populate(np, of_anatop_match, NULL, dev);
+
+	return 0;
+}
+
+static int __devexit of_anatop_remove(struct platform_device *pdev)
+{
+	struct anatop *drvdata;
+	drvdata = platform_get_drvdata(pdev);
+	iounmap(drvdata->ioreg);
+
+	return 0;
+}
+
+static struct platform_driver anatop_of_driver = {
+	.driver = {
+		.name = "anatop-mfd",
+		.owner = THIS_MODULE,
+		.of_match_table = of_anatop_match,
+	},
+	.probe		= of_anatop_probe,
+	.remove		= of_anatop_remove,
+};
+
+static int __init anatop_init(void)
+{
+	return platform_driver_register(&anatop_of_driver);
+}
+postcore_initcall(anatop_init);
+
+static void __exit anatop_exit(void)
+{
+	platform_driver_unregister(&anatop_of_driver);
+}
+module_exit(anatop_exit);
+
+MODULE_AUTHOR("Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>");
+MODULE_DESCRIPTION("ANATOP MFD driver");
+MODULE_LICENSE("GPL v2");

drivers/mfd/asic3.c

@@ -525,6 +525,11 @@ static void asic3_gpio_set(struct gpio_chip *chip,
 	return;
 }
 
+static int asic3_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	return (offset < ASIC3_NUM_GPIOS) ? IRQ_BOARD_START + offset : -ENXIO;
+}
+
 static __init int asic3_gpio_probe(struct platform_device *pdev,
 				   u16 *gpio_config, int num)
 {
@@ -976,6 +981,7 @@ static int __init asic3_probe(struct platform_device *pdev)
 	asic->gpio.set = asic3_gpio_set;
 	asic->gpio.direction_input = asic3_gpio_direction_input;
 	asic->gpio.direction_output = asic3_gpio_direction_output;
+	asic->gpio.to_irq = asic3_gpio_to_irq;
 
 	ret = asic3_gpio_probe(pdev,
 			       pdata->gpio_config,

drivers/mfd/da9052-core.c

@@ -16,7 +16,6 @@
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/mutex.h>
 #include <linux/mfd/core.h>
 #include <linux/slab.h>
 #include <linux/module.h>
@@ -647,8 +646,6 @@ int __devinit da9052_device_init(struct da9052 *da9052, u8 chip_id)
 	struct irq_desc *desc;
 	int ret;
 
-	mutex_init(&da9052->io_lock);
-
 	if (pdata && pdata->init != NULL)
 		pdata->init(da9052);
 

drivers/mfd/da9052-i2c.c

@@ -74,24 +74,27 @@ static int __devinit da9052_i2c_probe(struct i2c_client *client,
 
 	ret = da9052_i2c_enable_multiwrite(da9052);
 	if (ret < 0)
-		goto err;
+		goto err_regmap;
 
 	ret = da9052_device_init(da9052, id->driver_data);
 	if (ret != 0)
-		goto err;
+		goto err_regmap;
 
 	return 0;
 
+err_regmap:
+	regmap_exit(da9052->regmap);
 err:
 	kfree(da9052);
 	return ret;
 }
 
-static int da9052_i2c_remove(struct i2c_client *client)
+static int __devexit da9052_i2c_remove(struct i2c_client *client)
 {
 	struct da9052 *da9052 = i2c_get_clientdata(client);
 
 	da9052_device_exit(da9052);
+	regmap_exit(da9052->regmap);
 	kfree(da9052);
 
 	return 0;
@@ -107,7 +110,7 @@ static struct i2c_device_id da9052_i2c_id[] = {
 
 static struct i2c_driver da9052_i2c_driver = {
 	.probe = da9052_i2c_probe,
-	.remove = da9052_i2c_remove,
+	.remove = __devexit_p(da9052_i2c_remove),
 	.id_table = da9052_i2c_id,
 	.driver = {
 		.name = "da9052",

drivers/mfd/da9052-spi.c

@@ -21,7 +21,7 @@
 
 #include <linux/mfd/da9052/da9052.h>
 
-static int da9052_spi_probe(struct spi_device *spi)
+static int __devinit da9052_spi_probe(struct spi_device *spi)
 {
 	int ret;
 	const struct spi_device_id *id = spi_get_device_id(spi);
@@ -52,20 +52,23 @@ static int da9052_spi_probe(struct spi_device *spi)
 
 	ret = da9052_device_init(da9052, id->driver_data);
 	if (ret != 0)
-		goto err;
+		goto err_regmap;
 
 	return 0;
 
+err_regmap:
+	regmap_exit(da9052->regmap);
 err:
 	kfree(da9052);
 	return ret;
 }
 
-static int da9052_spi_remove(struct spi_device *spi)
+static int __devexit da9052_spi_remove(struct spi_device *spi)
 {
 	struct da9052 *da9052 = dev_get_drvdata(&spi->dev);
 
 	da9052_device_exit(da9052);
+	regmap_exit(da9052->regmap);
 	kfree(da9052);
 
 	return 0;

drivers/mfd/dbx500-prcmu-regs.h

@@ -17,41 +17,41 @@
 
 #define BITS(_start, _end) ((BIT(_end) - BIT(_start)) + BIT(_end))
 
-#define PRCM_SVACLK_MGT_OFF		0x008
-#define PRCM_SIACLK_MGT_OFF		0x00C
-#define PRCM_SGACLK_MGT_OFF		0x014
-#define PRCM_UARTCLK_MGT_OFF		0x018
-#define PRCM_MSP02CLK_MGT_OFF		0x01C
-#define PRCM_I2CCLK_MGT_OFF		0x020
-#define PRCM_SDMMCCLK_MGT_OFF		0x024
-#define PRCM_SLIMCLK_MGT_OFF		0x028
-#define PRCM_PER1CLK_MGT_OFF		0x02C
-#define PRCM_PER2CLK_MGT_OFF		0x030
-#define PRCM_PER3CLK_MGT_OFF		0x034
-#define PRCM_PER5CLK_MGT_OFF		0x038
-#define PRCM_PER6CLK_MGT_OFF		0x03C
-#define PRCM_PER7CLK_MGT_OFF		0x040
-#define PRCM_PWMCLK_MGT_OFF		0x044 /* for DB5500 */
-#define PRCM_IRDACLK_MGT_OFF		0x048 /* for DB5500 */
-#define PRCM_IRRCCLK_MGT_OFF		0x04C /* for DB5500 */
-#define PRCM_LCDCLK_MGT_OFF		0x044
-#define PRCM_BMLCLK_MGT_OFF		0x04C
-#define PRCM_HSITXCLK_MGT_OFF		0x050
-#define PRCM_HSIRXCLK_MGT_OFF		0x054
-#define PRCM_HDMICLK_MGT_OFF		0x058
-#define PRCM_APEATCLK_MGT_OFF		0x05C
-#define PRCM_APETRACECLK_MGT_OFF	0x060
-#define PRCM_MCDECLK_MGT_OFF		0x064
-#define PRCM_IPI2CCLK_MGT_OFF		0x068
-#define PRCM_DSIALTCLK_MGT_OFF		0x06C
-#define PRCM_DMACLK_MGT_OFF		0x074
-#define PRCM_B2R2CLK_MGT_OFF		0x078
-#define PRCM_TVCLK_MGT_OFF		0x07C
-#define PRCM_UNIPROCLK_MGT_OFF		0x278
-#define PRCM_SSPCLK_MGT_OFF		0x280
-#define PRCM_RNGCLK_MGT_OFF		0x284
-#define PRCM_UICCCLK_MGT_OFF		0x27C
-#define PRCM_MSP1CLK_MGT_OFF		0x288
+#define PRCM_CLK_MGT(_offset) (void __iomem *)(IO_ADDRESS(U8500_PRCMU_BASE) \
+	+ _offset)
+#define PRCM_ACLK_MGT		PRCM_CLK_MGT(0x004)
+#define PRCM_SVACLK_MGT		PRCM_CLK_MGT(0x008)
+#define PRCM_SIACLK_MGT		PRCM_CLK_MGT(0x00C)
+#define PRCM_SGACLK_MGT		PRCM_CLK_MGT(0x014)
+#define PRCM_UARTCLK_MGT	PRCM_CLK_MGT(0x018)
+#define PRCM_MSP02CLK_MGT	PRCM_CLK_MGT(0x01C)
+#define PRCM_I2CCLK_MGT		PRCM_CLK_MGT(0x020)
+#define PRCM_SDMMCCLK_MGT	PRCM_CLK_MGT(0x024)
+#define PRCM_SLIMCLK_MGT	PRCM_CLK_MGT(0x028)
+#define PRCM_PER1CLK_MGT	PRCM_CLK_MGT(0x02C)
+#define PRCM_PER2CLK_MGT	PRCM_CLK_MGT(0x030)
+#define PRCM_PER3CLK_MGT	PRCM_CLK_MGT(0x034)
+#define PRCM_PER5CLK_MGT	PRCM_CLK_MGT(0x038)
+#define PRCM_PER6CLK_MGT	PRCM_CLK_MGT(0x03C)
+#define PRCM_PER7CLK_MGT	PRCM_CLK_MGT(0x040)
+#define PRCM_LCDCLK_MGT		PRCM_CLK_MGT(0x044)
+#define PRCM_BMLCLK_MGT		PRCM_CLK_MGT(0x04C)
+#define PRCM_HSITXCLK_MGT	PRCM_CLK_MGT(0x050)
+#define PRCM_HSIRXCLK_MGT	PRCM_CLK_MGT(0x054)
+#define PRCM_HDMICLK_MGT	PRCM_CLK_MGT(0x058)
+#define PRCM_APEATCLK_MGT	PRCM_CLK_MGT(0x05C)
+#define PRCM_APETRACECLK_MGT	PRCM_CLK_MGT(0x060)
+#define PRCM_MCDECLK_MGT	PRCM_CLK_MGT(0x064)
+#define PRCM_IPI2CCLK_MGT	PRCM_CLK_MGT(0x068)
+#define PRCM_DSIALTCLK_MGT	PRCM_CLK_MGT(0x06C)
+#define PRCM_DMACLK_MGT		PRCM_CLK_MGT(0x074)
+#define PRCM_B2R2CLK_MGT	PRCM_CLK_MGT(0x078)
+#define PRCM_TVCLK_MGT		PRCM_CLK_MGT(0x07C)
+#define PRCM_UNIPROCLK_MGT	PRCM_CLK_MGT(0x278)
+#define PRCM_SSPCLK_MGT		PRCM_CLK_MGT(0x280)
+#define PRCM_RNGCLK_MGT		PRCM_CLK_MGT(0x284)
+#define PRCM_UICCCLK_MGT	PRCM_CLK_MGT(0x27C)
+#define PRCM_MSP1CLK_MGT	PRCM_CLK_MGT(0x288)
 
 #define PRCM_ARM_PLLDIVPS	(_PRCMU_BASE + 0x118)
 #define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE		0x3f
@@ -79,6 +79,8 @@
 
 /* ARM WFI Standby signal register */
 #define PRCM_ARM_WFI_STANDBY    (_PRCMU_BASE + 0x130)
+#define PRCM_ARM_WFI_STANDBY_WFI0               0x08
+#define PRCM_ARM_WFI_STANDBY_WFI1               0x10
 #define PRCM_IOCR		(_PRCMU_BASE + 0x310)
 #define PRCM_IOCR_IOFORCE			0x1
 
@@ -131,20 +133,58 @@
 #define PRCM_MMIP_LS_CLAMP_SET     (_PRCMU_BASE + 0x420)
 #define PRCM_MMIP_LS_CLAMP_CLR     (_PRCMU_BASE + 0x424)
 
+#define PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP		BIT(11)
+#define PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI	BIT(22)
+
 /* PRCMU clock/PLL/reset registers */
+#define PRCM_PLLSOC0_FREQ	   (_PRCMU_BASE + 0x080)
+#define PRCM_PLLSOC1_FREQ	   (_PRCMU_BASE + 0x084)
+#define PRCM_PLLDDR_FREQ	   (_PRCMU_BASE + 0x08C)
+#define PRCM_PLL_FREQ_D_SHIFT	0
+#define PRCM_PLL_FREQ_D_MASK	BITS(0, 7)
+#define PRCM_PLL_FREQ_N_SHIFT	8
+#define PRCM_PLL_FREQ_N_MASK	BITS(8, 13)
+#define PRCM_PLL_FREQ_R_SHIFT	16
+#define PRCM_PLL_FREQ_R_MASK	BITS(16, 18)
+#define PRCM_PLL_FREQ_SELDIV2	BIT(24)
+#define PRCM_PLL_FREQ_DIV2EN	BIT(25)
+
 #define PRCM_PLLDSI_FREQ           (_PRCMU_BASE + 0x500)
 #define PRCM_PLLDSI_ENABLE         (_PRCMU_BASE + 0x504)
 #define PRCM_PLLDSI_LOCKP          (_PRCMU_BASE + 0x508)
-#define PRCM_LCDCLK_MGT            (_PRCMU_BASE + PRCM_LCDCLK_MGT_OFF)
-#define PRCM_MCDECLK_MGT           (_PRCMU_BASE + PRCM_MCDECLK_MGT_OFF)
-#define PRCM_HDMICLK_MGT           (_PRCMU_BASE + PRCM_HDMICLK_MGT_OFF)
-#define PRCM_TVCLK_MGT             (_PRCMU_BASE + PRCM_TVCLK_MGT_OFF)
 #define PRCM_DSI_PLLOUT_SEL        (_PRCMU_BASE + 0x530)
 #define PRCM_DSITVCLK_DIV          (_PRCMU_BASE + 0x52C)
 #define PRCM_PLLDSI_LOCKP          (_PRCMU_BASE + 0x508)
 #define PRCM_APE_RESETN_SET        (_PRCMU_BASE + 0x1E4)
 #define PRCM_APE_RESETN_CLR        (_PRCMU_BASE + 0x1E8)
 
+#define PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE BIT(0)
+
+#define PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP10	BIT(0)
+#define PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP3	BIT(1)
+
+#define PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_SHIFT	0
+#define PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_MASK	BITS(0, 2)
+#define PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_SHIFT	8
+#define PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_MASK	BITS(8, 10)
+
+#define PRCM_DSI_PLLOUT_SEL_OFF		0
+#define PRCM_DSI_PLLOUT_SEL_PHI		1
+#define PRCM_DSI_PLLOUT_SEL_PHI_2	2
+#define PRCM_DSI_PLLOUT_SEL_PHI_4	3
+
+#define PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_SHIFT	0
+#define PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_MASK		BITS(0, 7)
+#define PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_SHIFT	8
+#define PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_MASK		BITS(8, 15)
+#define PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_SHIFT	16
+#define PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_MASK		BITS(16, 23)
+#define PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_EN		BIT(24)
+#define PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_EN		BIT(25)
+#define PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_EN		BIT(26)
+
+#define PRCM_APE_RESETN_DSIPLL_RESETN BIT(14)
+
 #define PRCM_CLKOCR		   (_PRCMU_BASE + 0x1CC)
 #define PRCM_CLKOCR_CLKOUT0_REF_CLK	(1 << 0)
 #define PRCM_CLKOCR_CLKOUT0_MASK	BITS(0, 13)
@@ -183,9 +223,15 @@
 #define PRCM_CLKOCR_CLKOSEL1_MASK	BITS(22, 24)
 #define PRCM_CLKOCR_CLK1TYPE		BIT(28)
 
-#define PRCM_CLK_MGT_CLKPLLDIV_MASK	BITS(0, 4)
-#define PRCM_CLK_MGT_CLKPLLSW_MASK	BITS(5, 7)
-#define PRCM_CLK_MGT_CLKEN		BIT(8)
+#define PRCM_CLK_MGT_CLKPLLDIV_MASK		BITS(0, 4)
+#define PRCM_CLK_MGT_CLKPLLSW_SOC0		BIT(5)
+#define PRCM_CLK_MGT_CLKPLLSW_SOC1		BIT(6)
+#define PRCM_CLK_MGT_CLKPLLSW_DDR		BIT(7)
+#define PRCM_CLK_MGT_CLKPLLSW_MASK		BITS(5, 7)
+#define PRCM_CLK_MGT_CLKEN			BIT(8)
+#define PRCM_CLK_MGT_CLK38			BIT(9)
+#define PRCM_CLK_MGT_CLK38DIV			BIT(11)
+#define PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN	BIT(12)
 
 /* GPIOCR register */
 #define PRCM_GPIOCR_SPI2_SELECT BIT(23)

drivers/mfd/mc13xxx-core.c

@@ -560,6 +560,8 @@ EXPORT_SYMBOL(mc13xxx_get_flags);
 
 #define MC13XXX_ADC1_CHAN0_SHIFT	5
 #define MC13XXX_ADC1_CHAN1_SHIFT	8
+#define MC13783_ADC1_ATO_SHIFT		11
+#define MC13783_ADC1_ATOX		(1 << 19)
 
 struct mc13xxx_adcdone_data {
 	struct mc13xxx *mc13xxx;
@@ -580,7 +582,8 @@ static irqreturn_t mc13xxx_handler_adcdone(int irq, void *data)
 #define MC13XXX_ADC_WORKING (1 << 0)
 
 int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode,
-		unsigned int channel, unsigned int *sample)
+		unsigned int channel, u8 ato, bool atox,
+		unsigned int *sample)
 {
 	u32 adc0, adc1, old_adc0;
 	int i, ret;
@@ -631,6 +634,9 @@ int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode,
 		return -EINVAL;
 	}
 
+	adc1 |= ato << MC13783_ADC1_ATO_SHIFT;
+	if (atox)
+		adc1 |= MC13783_ADC1_ATOX;
 	dev_dbg(&mc13xxx->spidev->dev, "%s: request irq\n", __func__);
 	mc13xxx_irq_request(mc13xxx, MC13XXX_IRQ_ADCDONE,
 			mc13xxx_handler_adcdone, __func__, &adcdone_data);
@@ -813,7 +819,8 @@ static int mc13xxx_probe(struct spi_device *spi)
 		mc13xxx_add_subdevice(mc13xxx, "%s-rtc");
 
 	if (mc13xxx->flags & MC13XXX_USE_TOUCHSCREEN)
-		mc13xxx_add_subdevice(mc13xxx, "%s-ts");
+		mc13xxx_add_subdevice_pdata(mc13xxx, "%s-ts",
+				&pdata->touch, sizeof(pdata->touch));
 
 	if (pdata) {
 		mc13xxx_add_subdevice_pdata(mc13xxx, "%s-regulator",

drivers/mfd/mfd-core.c

@@ -162,7 +162,7 @@ int mfd_add_devices(struct device *parent, int id,
 	atomic_t *cnts;
 
 	/* initialize reference counting for all cells */
-	cnts = kcalloc(sizeof(*cnts), n_devs, GFP_KERNEL);
+	cnts = kcalloc(n_devs, sizeof(*cnts), GFP_KERNEL);
 	if (!cnts)
 		return -ENOMEM;
 

drivers/mfd/omap-usb-host.c

@@ -170,7 +170,7 @@ struct usbhs_hcd_omap {
 /*-------------------------------------------------------------------------*/
 
 const char usbhs_driver_name[] = USBHS_DRIVER_NAME;
-static u64 usbhs_dmamask = ~(u32)0;
+static u64 usbhs_dmamask = DMA_BIT_MASK(32);
 
 /*-------------------------------------------------------------------------*/
 
@@ -223,7 +223,7 @@ static struct platform_device *omap_usbhs_alloc_child(const char *name,
 	}
 
 	child->dev.dma_mask		= &usbhs_dmamask;
-	child->dev.coherent_dma_mask	= 0xffffffff;
+	dma_set_coherent_mask(&child->dev, DMA_BIT_MASK(32));
 	child->dev.parent		= dev;
 
 	ret = platform_device_add(child);
@@ -799,14 +799,13 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, omap);
 
+	omap_usbhs_init(dev);
 	ret = omap_usbhs_alloc_children(pdev);
 	if (ret) {
 		dev_err(dev, "omap_usbhs_alloc_children failed\n");
 		goto err_alloc;
 	}
 
-	omap_usbhs_init(dev);
-
 	goto end_probe;
 
 err_alloc:

drivers/mfd/pcf50633-core.c

@@ -46,13 +46,7 @@ EXPORT_SYMBOL_GPL(pcf50633_read_block);
 int pcf50633_write_block(struct pcf50633 *pcf , u8 reg,
 					int nr_regs, u8 *data)
 {
-	int ret;
-
-	ret = regmap_raw_write(pcf->regmap, reg, data, nr_regs);
-	if (ret != 0)
-		return ret;
-
-	return nr_regs;
+	return regmap_raw_write(pcf->regmap, reg, data, nr_regs);
 }
 EXPORT_SYMBOL_GPL(pcf50633_write_block);
 

drivers/mfd/pcf50633-gpio.c

@@ -19,32 +19,7 @@
 
 #include <linux/mfd/pcf50633/core.h>
 #include <linux/mfd/pcf50633/gpio.h>
-
-enum pcf50633_regulator_id {
-	PCF50633_REGULATOR_AUTO,
-	PCF50633_REGULATOR_DOWN1,
-	PCF50633_REGULATOR_DOWN2,
-	PCF50633_REGULATOR_LDO1,
-	PCF50633_REGULATOR_LDO2,
-	PCF50633_REGULATOR_LDO3,
-	PCF50633_REGULATOR_LDO4,
-	PCF50633_REGULATOR_LDO5,
-	PCF50633_REGULATOR_LDO6,
-	PCF50633_REGULATOR_HCLDO,
-	PCF50633_REGULATOR_MEMLDO,
-};
-
-#define PCF50633_REG_AUTOOUT	0x1a
-#define PCF50633_REG_DOWN1OUT	0x1e
-#define PCF50633_REG_DOWN2OUT	0x22
-#define PCF50633_REG_MEMLDOOUT	0x26
-#define PCF50633_REG_LDO1OUT	0x2d
-#define PCF50633_REG_LDO2OUT	0x2f
-#define PCF50633_REG_LDO3OUT	0x31
-#define PCF50633_REG_LDO4OUT	0x33
-#define PCF50633_REG_LDO5OUT	0x35
-#define PCF50633_REG_LDO6OUT	0x37
-#define PCF50633_REG_HCLDOOUT	0x39
+#include <linux/mfd/pcf50633/pmic.h>
 
 static const u8 pcf50633_regulator_registers[PCF50633_NUM_REGULATORS] = {
 	[PCF50633_REGULATOR_AUTO]	= PCF50633_REG_AUTOOUT,

drivers/mfd/pcf50633-irq.c

@@ -19,12 +19,7 @@
 #include <linux/slab.h>
 
 #include <linux/mfd/pcf50633/core.h>
-
-/* Two MBCS registers used during cold start */
-#define PCF50633_REG_MBCS1		0x4b
-#define PCF50633_REG_MBCS2		0x4c
-#define PCF50633_MBCS1_USBPRES 		0x01
-#define PCF50633_MBCS1_ADAPTPRES	0x01
+#include <linux/mfd/pcf50633/mbc.h>
 
 int pcf50633_register_irq(struct pcf50633 *pcf, int irq,
 			void (*handler) (int, void *), void *data)

drivers/mfd/s5m-core.c

@@ -26,7 +26,27 @@
 #include <linux/mfd/s5m87xx/s5m-rtc.h>
 #include <linux/regmap.h>
 
-static struct mfd_cell s5m87xx_devs[] = {
+static struct mfd_cell s5m8751_devs[] = {
+	{
+		.name = "s5m8751-pmic",
+	}, {
+		.name = "s5m-charger",
+	}, {
+		.name = "s5m8751-codec",
+	},
+};
+
+static struct mfd_cell s5m8763_devs[] = {
+	{
+		.name = "s5m8763-pmic",
+	}, {
+		.name = "s5m-rtc",
+	}, {
+		.name = "s5m-charger",
+	},
+};
+
+static struct mfd_cell s5m8767_devs[] = {
 	{
 		.name = "s5m8767-pmic",
 	}, {
@@ -42,7 +62,7 @@ EXPORT_SYMBOL_GPL(s5m_reg_read);
 
 int s5m_bulk_read(struct s5m87xx_dev *s5m87xx, u8 reg, int count, u8 *buf)
 {
-	return regmap_bulk_read(s5m87xx->regmap, reg, buf, count);;
+	return regmap_bulk_read(s5m87xx->regmap, reg, buf, count);
 }
 EXPORT_SYMBOL_GPL(s5m_bulk_read);
 
@@ -54,7 +74,7 @@ EXPORT_SYMBOL_GPL(s5m_reg_write);
 
 int s5m_bulk_write(struct s5m87xx_dev *s5m87xx, u8 reg, int count, u8 *buf)
 {
-	return regmap_raw_write(s5m87xx->regmap, reg, buf, count * sizeof(u16));
+	return regmap_raw_write(s5m87xx->regmap, reg, buf, count);
 }
 EXPORT_SYMBOL_GPL(s5m_bulk_write);
 
@@ -74,10 +94,10 @@ static int s5m87xx_i2c_probe(struct i2c_client *i2c,
 {
 	struct s5m_platform_data *pdata = i2c->dev.platform_data;
 	struct s5m87xx_dev *s5m87xx;
-	int ret = 0;
-	int error;
+	int ret;
 
-	s5m87xx = kzalloc(sizeof(struct s5m87xx_dev), GFP_KERNEL);
+	s5m87xx = devm_kzalloc(&i2c->dev, sizeof(struct s5m87xx_dev),
+				GFP_KERNEL);
 	if (s5m87xx == NULL)
 		return -ENOMEM;
 
@@ -96,9 +116,9 @@ static int s5m87xx_i2c_probe(struct i2c_client *i2c,
 
 	s5m87xx->regmap = regmap_init_i2c(i2c, &s5m_regmap_config);
 	if (IS_ERR(s5m87xx->regmap)) {
-		error = PTR_ERR(s5m87xx->regmap);
+		ret = PTR_ERR(s5m87xx->regmap);
 		dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
-			error);
+			ret);
 		goto err;
 	}
 
@@ -112,9 +132,23 @@ static int s5m87xx_i2c_probe(struct i2c_client *i2c,
 
 	pm_runtime_set_active(s5m87xx->dev);
 
-	ret = mfd_add_devices(s5m87xx->dev, -1,
-				s5m87xx_devs, ARRAY_SIZE(s5m87xx_devs),
-				NULL, 0);
+	switch (s5m87xx->device_type) {
+	case S5M8751X:
+		ret = mfd_add_devices(s5m87xx->dev, -1, s5m8751_devs,
+					ARRAY_SIZE(s5m8751_devs), NULL, 0);
+		break;
+	case S5M8763X:
+		ret = mfd_add_devices(s5m87xx->dev, -1, s5m8763_devs,
+					ARRAY_SIZE(s5m8763_devs), NULL, 0);
+		break;
+	case S5M8767X:
+		ret = mfd_add_devices(s5m87xx->dev, -1, s5m8767_devs,
+					ARRAY_SIZE(s5m8767_devs), NULL, 0);
+		break;
+	default:
+		/* If this happens the probe function is problem */
+		BUG();
+	}
 
 	if (ret < 0)
 		goto err;
@@ -126,7 +160,6 @@ static int s5m87xx_i2c_probe(struct i2c_client *i2c,
 	s5m_irq_exit(s5m87xx);
 	i2c_unregister_device(s5m87xx->rtc);
 	regmap_exit(s5m87xx->regmap);
-	kfree(s5m87xx);
 	return ret;
 }
 
@@ -138,7 +171,6 @@ static int s5m87xx_i2c_remove(struct i2c_client *i2c)
 	s5m_irq_exit(s5m87xx);
 	i2c_unregister_device(s5m87xx->rtc);
 	regmap_exit(s5m87xx->regmap);
-	kfree(s5m87xx);
 	return 0;
 }
 

drivers/mfd/s5m-irq.c

@@ -342,7 +342,10 @@ int s5m_irq_resume(struct s5m87xx_dev *s5m87xx)
 			s5m8767_irq_thread(s5m87xx->irq_base, s5m87xx);
 			break;
 		default:
-			break;
+			dev_err(s5m87xx->dev,
+				"Unknown device type %d\n",
+				s5m87xx->device_type);
+			return -EINVAL;
 
 		}
 	}
@@ -444,7 +447,9 @@ int s5m_irq_init(struct s5m87xx_dev *s5m87xx)
 		}
 		break;
 	default:
-		break;
+		dev_err(s5m87xx->dev,
+			"Unknown device type %d\n", s5m87xx->device_type);
+		return -EINVAL;
 	}
 
 	if (!s5m87xx->ono)
@@ -467,12 +472,15 @@ int s5m_irq_init(struct s5m87xx_dev *s5m87xx)
 					IRQF_ONESHOT, "s5m87xx-ono", s5m87xx);
 		break;
 	default:
+		ret = -EINVAL;
 		break;
 	}
 
-	if (ret)
+	if (ret) {
 		dev_err(s5m87xx->dev, "Failed to request IRQ %d: %d\n",
 			s5m87xx->ono, ret);
+		return ret;
+	}
 
 	return 0;
 }

drivers/mfd/sm501.c

@@ -387,14 +387,6 @@ int sm501_unit_power(struct device *dev, unsigned int unit, unsigned int to)
 
 EXPORT_SYMBOL_GPL(sm501_unit_power);
 
-
-/* Perform a rounded division. */
-static long sm501fb_round_div(long num, long denom)
-{
-        /* n / d + 1 / 2 = (2n + d) / 2d */
-        return (2 * num + denom) / (2 * denom);
-}
-
 /* clock value structure. */
 struct sm501_clock {
 	unsigned long mclk;
@@ -428,7 +420,7 @@ static int sm501_calc_clock(unsigned long freq,
 		/* try all 8 shift values.*/
 		for (shift = 0; shift < 8; shift++) {
 			/* Calculate difference to requested clock */
-			diff = sm501fb_round_div(mclk, divider << shift) - freq;
+			diff = DIV_ROUND_CLOSEST(mclk, divider << shift) - freq;
 			if (diff < 0)
 				diff = -diff;
 

drivers/mfd/stmpe.c

@@ -298,6 +298,11 @@ static struct mfd_cell stmpe_gpio_cell = {
 	.num_resources	= ARRAY_SIZE(stmpe_gpio_resources),
 };
 
+static struct mfd_cell stmpe_gpio_cell_noirq = {
+	.name		= "stmpe-gpio",
+	/* gpio cell resources consist of an irq only so no resources here */
+};
+
 /*
  * Keypad (1601, 2401, 2403)
  */
@@ -346,6 +351,13 @@ static struct stmpe_variant_block stmpe801_blocks[] = {
 	},
 };
 
+static struct stmpe_variant_block stmpe801_blocks_noirq[] = {
+	{
+		.cell	= &stmpe_gpio_cell_noirq,
+		.block	= STMPE_BLOCK_GPIO,
+	},
+};
+
 static int stmpe801_enable(struct stmpe *stmpe, unsigned int blocks,
 			   bool enable)
 {
@@ -367,6 +379,17 @@ static struct stmpe_variant_info stmpe801 = {
 	.enable		= stmpe801_enable,
 };
 
+static struct stmpe_variant_info stmpe801_noirq = {
+	.name		= "stmpe801",
+	.id_val		= STMPE801_ID,
+	.id_mask	= 0xffff,
+	.num_gpios	= 8,
+	.regs		= stmpe801_regs,
+	.blocks		= stmpe801_blocks_noirq,
+	.num_blocks	= ARRAY_SIZE(stmpe801_blocks_noirq),
+	.enable		= stmpe801_enable,
+};
+
 /*
  * Touchscreen (STMPE811 or STMPE610)
  */
@@ -712,7 +735,7 @@ static struct stmpe_variant_info stmpe2403 = {
 	.enable_autosleep	= stmpe1601_autosleep, /* same as stmpe1601 */
 };
 
-static struct stmpe_variant_info *stmpe_variant_info[] = {
+static struct stmpe_variant_info *stmpe_variant_info[STMPE_NBR_PARTS] = {
 	[STMPE610]	= &stmpe610,
 	[STMPE801]	= &stmpe801,
 	[STMPE811]	= &stmpe811,
@@ -721,6 +744,16 @@ static struct stmpe_variant_info *stmpe_variant_info[] = {
 	[STMPE2403]	= &stmpe2403,
 };
 
+/*
+ * These devices can be connected in a 'no-irq' configuration - the irq pin
+ * is not used and the device cannot interrupt the CPU. Here we only list
+ * devices which support this configuration - the driver will fail probing
+ * for any devices not listed here which are configured in this way.
+ */
+static struct stmpe_variant_info *stmpe_noirq_variant_info[STMPE_NBR_PARTS] = {
+	[STMPE801]	= &stmpe801_noirq,
+};
+
 static irqreturn_t stmpe_irq(int irq, void *data)
 {
 	struct stmpe *stmpe = data;
@@ -864,7 +897,7 @@ static int __devinit stmpe_chip_init(struct stmpe *stmpe)
 	unsigned int irq_trigger = stmpe->pdata->irq_trigger;
 	int autosleep_timeout = stmpe->pdata->autosleep_timeout;
 	struct stmpe_variant_info *variant = stmpe->variant;
-	u8 icr;
+	u8 icr = 0;
 	unsigned int id;
 	u8 data[2];
 	int ret;
@@ -887,31 +920,33 @@ static int __devinit stmpe_chip_init(struct stmpe *stmpe)
 	if (ret)
 		return ret;
 
-	if (id == STMPE801_ID)
-		icr = STMPE801_REG_SYS_CTRL_INT_EN;
-	else
-		icr = STMPE_ICR_LSB_GIM;
-
-	/* STMPE801 doesn't support Edge interrupts */
-	if (id != STMPE801_ID) {
-		if (irq_trigger == IRQF_TRIGGER_FALLING ||
-				irq_trigger == IRQF_TRIGGER_RISING)
-			icr |= STMPE_ICR_LSB_EDGE;
-	}
-
-	if (irq_trigger == IRQF_TRIGGER_RISING ||
-			irq_trigger == IRQF_TRIGGER_HIGH) {
+	if (stmpe->irq >= 0) {
 		if (id == STMPE801_ID)
-			icr |= STMPE801_REG_SYS_CTRL_INT_HI;
+			icr = STMPE801_REG_SYS_CTRL_INT_EN;
 		else
-			icr |= STMPE_ICR_LSB_HIGH;
-	}
+			icr = STMPE_ICR_LSB_GIM;
 
-	if (stmpe->pdata->irq_invert_polarity) {
-		if (id == STMPE801_ID)
-			icr ^= STMPE801_REG_SYS_CTRL_INT_HI;
-		else
-			icr ^= STMPE_ICR_LSB_HIGH;
+		/* STMPE801 doesn't support Edge interrupts */
+		if (id != STMPE801_ID) {
+			if (irq_trigger == IRQF_TRIGGER_FALLING ||
+					irq_trigger == IRQF_TRIGGER_RISING)
+				icr |= STMPE_ICR_LSB_EDGE;
+		}
+
+		if (irq_trigger == IRQF_TRIGGER_RISING ||
+				irq_trigger == IRQF_TRIGGER_HIGH) {
+			if (id == STMPE801_ID)
+				icr |= STMPE801_REG_SYS_CTRL_INT_HI;
+			else
+				icr |= STMPE_ICR_LSB_HIGH;
+		}
+
+		if (stmpe->pdata->irq_invert_polarity) {
+			if (id == STMPE801_ID)
+				icr ^= STMPE801_REG_SYS_CTRL_INT_HI;
+			else
+				icr ^= STMPE_ICR_LSB_HIGH;
+		}
 	}
 
 	if (stmpe->pdata->autosleep) {
@@ -1001,19 +1036,38 @@ int __devinit stmpe_probe(struct stmpe_client_info *ci, int partnum)
 		stmpe->irq = ci->irq;
 	}
 
+	if (stmpe->irq < 0) {
+		/* use alternate variant info for no-irq mode, if supported */
+		dev_info(stmpe->dev,
+			"%s configured in no-irq mode by platform data\n",
+			stmpe->variant->name);
+		if (!stmpe_noirq_variant_info[stmpe->partnum]) {
+			dev_err(stmpe->dev,
+				"%s does not support no-irq mode!\n",
+				stmpe->variant->name);
+			ret = -ENODEV;
+			goto free_gpio;
+		}
+		stmpe->variant = stmpe_noirq_variant_info[stmpe->partnum];
+	}
+
 	ret = stmpe_chip_init(stmpe);
 	if (ret)
 		goto free_gpio;
 
-	ret = stmpe_irq_init(stmpe);
-	if (ret)
-		goto free_gpio;
+	if (stmpe->irq >= 0) {
+		ret = stmpe_irq_init(stmpe);
+		if (ret)
+			goto free_gpio;
 
-	ret = request_threaded_irq(stmpe->irq, NULL, stmpe_irq,
-			pdata->irq_trigger | IRQF_ONESHOT, "stmpe", stmpe);
-	if (ret) {
-		dev_err(stmpe->dev, "failed to request IRQ: %d\n", ret);
-		goto out_removeirq;
+		ret = request_threaded_irq(stmpe->irq, NULL, stmpe_irq,
+				pdata->irq_trigger | IRQF_ONESHOT,
+				"stmpe", stmpe);
+		if (ret) {
+			dev_err(stmpe->dev, "failed to request IRQ: %d\n",
+					ret);
+			goto out_removeirq;
+		}
 	}
 
 	ret = stmpe_devices_init(stmpe);
@@ -1026,9 +1080,11 @@ int __devinit stmpe_probe(struct stmpe_client_info *ci, int partnum)
 
 out_removedevs:
 	mfd_remove_devices(stmpe->dev);
-	free_irq(stmpe->irq, stmpe);
+	if (stmpe->irq >= 0)
+		free_irq(stmpe->irq, stmpe);
 out_removeirq:
-	stmpe_irq_remove(stmpe);
+	if (stmpe->irq >= 0)
+		stmpe_irq_remove(stmpe);
 free_gpio:
 	if (pdata->irq_over_gpio)
 		gpio_free(pdata->irq_gpio);
@@ -1041,8 +1097,10 @@ int stmpe_remove(struct stmpe *stmpe)
 {
 	mfd_remove_devices(stmpe->dev);
 
-	free_irq(stmpe->irq, stmpe);
-	stmpe_irq_remove(stmpe);
+	if (stmpe->irq >= 0) {
+		free_irq(stmpe->irq, stmpe);
+		stmpe_irq_remove(stmpe);
+	}
 
 	if (stmpe->pdata->irq_over_gpio)
 		gpio_free(stmpe->pdata->irq_gpio);
@@ -1057,7 +1115,7 @@ static int stmpe_suspend(struct device *dev)
 {
 	struct stmpe *stmpe = dev_get_drvdata(dev);
 
-	if (device_may_wakeup(dev))
+	if (stmpe->irq >= 0 && device_may_wakeup(dev))
 		enable_irq_wake(stmpe->irq);
 
 	return 0;
@@ -1067,7 +1125,7 @@ static int stmpe_resume(struct device *dev)
 {
 	struct stmpe *stmpe = dev_get_drvdata(dev);
 
-	if (device_may_wakeup(dev))
+	if (stmpe->irq >= 0 && device_may_wakeup(dev))
 		disable_irq_wake(stmpe->irq);
 
 	return 0;

drivers/mfd/tps65910-irq.c

@@ -145,12 +145,23 @@ static void tps65910_irq_disable(struct irq_data *data)
 	tps65910->irq_mask |= ( 1 << irq_to_tps65910_irq(tps65910, data->irq));
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int tps65910_irq_set_wake(struct irq_data *data, unsigned int enable)
+{
+	struct tps65910 *tps65910 = irq_data_get_irq_chip_data(data);
+	return irq_set_irq_wake(tps65910->chip_irq, enable);
+}
+#else
+#define tps65910_irq_set_wake NULL
+#endif
+
 static struct irq_chip tps65910_irq_chip = {
 	.name = "tps65910",
 	.irq_bus_lock = tps65910_irq_lock,
 	.irq_bus_sync_unlock = tps65910_irq_sync_unlock,
 	.irq_disable = tps65910_irq_disable,
 	.irq_enable = tps65910_irq_enable,
+	.irq_set_wake = tps65910_irq_set_wake,
 };
 
 int tps65910_irq_init(struct tps65910 *tps65910, int irq,

drivers/mfd/twl-core.h

 #ifndef __TWL_CORE_H__
 #define __TWL_CORE_H__
 
-extern int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end);
+extern int twl6030_init_irq(struct device *dev, int irq_num);
 extern int twl6030_exit_irq(void);
-extern int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end);
+extern int twl4030_init_irq(struct device *dev, int irq_num);
 extern int twl4030_exit_irq(void);
 extern int twl4030_init_chip_irq(const char *chip);
 

drivers/mfd/wm831x-spi.c

@@ -89,7 +89,7 @@ static const struct spi_device_id wm831x_spi_ids[] = {
 	{ "wm8326", WM8326 },
 	{ },
 };
-MODULE_DEVICE_TABLE(spi, wm831x_spi_id);
+MODULE_DEVICE_TABLE(spi, wm831x_spi_ids);
 
 static struct spi_driver wm831x_spi_driver = {
 	.driver = {

drivers/mfd/wm8400-core.c

@@ -271,8 +271,7 @@ static int wm8400_init(struct wm8400 *wm8400,
 		return -EIO;
 	}
 	if (i != reg_data[WM8400_RESET_ID].default_val) {
-		dev_err(wm8400->dev, "Device is not a WM8400, ID is %x\n",
-			reg);
+		dev_err(wm8400->dev, "Device is not a WM8400, ID is %x\n", i);
 		return -ENODEV;
 	}
 

drivers/mfd/wm8994-core.c

@@ -639,7 +639,7 @@ static __devinit int wm8994_device_init(struct wm8994 *wm8994, int irq)
 	}
 
 	pm_runtime_enable(wm8994->dev);
-	pm_runtime_resume(wm8994->dev);
+	pm_runtime_idle(wm8994->dev);
 
 	return 0;
 

drivers/mfd/wm8994-regmap.c

@@ -20,7 +20,6 @@
 #include "wm8994.h"
 
 static struct reg_default wm1811_defaults[] = {
-	{ 0x0000, 0x1811 },    /* R0    - Software Reset */
 	{ 0x0001, 0x0000 },    /* R1    - Power Management (1) */
 	{ 0x0002, 0x6000 },    /* R2    - Power Management (2) */
 	{ 0x0003, 0x0000 },    /* R3    - Power Management (3) */
@@ -61,7 +60,7 @@ static struct reg_default wm1811_defaults[] = {
 	{ 0x0036, 0x0000 },    /* R54   - Speaker Mixer */
 	{ 0x0037, 0x0000 },    /* R55   - Additional Control */
 	{ 0x0038, 0x0000 },    /* R56   - AntiPOP (1) */
-	{ 0x0039, 0x0180 },    /* R57   - AntiPOP (2) */
+	{ 0x0039, 0x0000 },    /* R57   - AntiPOP (2) */
 	{ 0x003B, 0x000D },    /* R59   - LDO 1 */
 	{ 0x003C, 0x0003 },    /* R60   - LDO 2 */
 	{ 0x003D, 0x0039 },    /* R61   - MICBIAS1 */
@@ -69,16 +68,12 @@ static struct reg_default wm1811_defaults[] = {
 	{ 0x004C, 0x1F25 },    /* R76   - Charge Pump (1) */
 	{ 0x004D, 0xAB19 },    /* R77   - Charge Pump (2) */
 	{ 0x0051, 0x0004 },    /* R81   - Class W (1) */
-	{ 0x0054, 0x0000 },    /* R84   - DC Servo (1) */
 	{ 0x0055, 0x054A },    /* R85   - DC Servo (2) */
-	{ 0x0058, 0x0000 },    /* R88   - DC Servo Readback */
 	{ 0x0059, 0x0000 },    /* R89   - DC Servo (4) */
 	{ 0x0060, 0x0000 },    /* R96   - Analogue HP (1) */
 	{ 0x00C5, 0x0000 },    /* R197  - Class D Test (5) */
 	{ 0x00D0, 0x7600 },    /* R208  - Mic Detect 1 */
 	{ 0x00D1, 0x007F },    /* R209  - Mic Detect 2 */
-	{ 0x00D2, 0x0000 },    /* R210  - Mic Detect 3 */
-	{ 0x0100, 0x0100 },    /* R256  - Chip Revision */
 	{ 0x0101, 0x8004 },    /* R257  - Control Interface */
 	{ 0x0200, 0x0000 },    /* R512  - AIF1 Clocking (1) */
 	{ 0x0201, 0x0000 },    /* R513  - AIF1 Clocking (2) */
@@ -88,7 +83,6 @@ static struct reg_default wm1811_defaults[] = {
 	{ 0x0209, 0x0000 },    /* R521  - Clocking (2) */
 	{ 0x0210, 0x0083 },    /* R528  - AIF1 Rate */
 	{ 0x0211, 0x0083 },    /* R529  - AIF2 Rate */
-	{ 0x0212, 0x0000 },    /* R530  - Rate Status */
 	{ 0x0220, 0x0000 },    /* R544  - FLL1 Control (1) */
 	{ 0x0221, 0x0000 },    /* R545  - FLL1 Control (2) */
 	{ 0x0222, 0x0000 },    /* R546  - FLL1 Control (3) */
@@ -218,8 +212,6 @@ static struct reg_default wm1811_defaults[] = {
 	{ 0x070A, 0xA101 },    /* R1802 - GPIO 11 */
 	{ 0x0720, 0x0000 },    /* R1824 - Pull Control (1) */
 	{ 0x0721, 0x0156 },    /* R1825 - Pull Control (2) */
-	{ 0x0730, 0x0000 },    /* R1840 - Interrupt Status 1 */
-	{ 0x0731, 0x0000 },    /* R1841 - Interrupt Status 2 */
 	{ 0x0732, 0x0000 },    /* R1842 - Interrupt Raw Status 2 */
 	{ 0x0738, 0x07FF },    /* R1848 - Interrupt Status 1 Mask */
 	{ 0x0739, 0xDFEF },    /* R1849 - Interrupt Status 2 Mask */
@@ -228,7 +220,6 @@ static struct reg_default wm1811_defaults[] = {
 };
 
 static struct reg_default wm8994_defaults[] = {
-	{ 0x0000, 0x8994 },    /* R0     - Software Reset */ 
 	{ 0x0001, 0x0000 },    /* R1     - Power Management (1) */ 
 	{ 0x0002, 0x6000 },    /* R2     - Power Management (2) */ 
 	{ 0x0003, 0x0000 },    /* R3     - Power Management (3) */ 
@@ -275,12 +266,9 @@ static struct reg_default wm8994_defaults[] = {
 	{ 0x003C, 0x0003 },    /* R60    - LDO 2 */ 
 	{ 0x004C, 0x1F25 },    /* R76    - Charge Pump (1) */ 
 	{ 0x0051, 0x0004 },    /* R81    - Class W (1) */ 
-	{ 0x0054, 0x0000 },    /* R84    - DC Servo (1) */ 
 	{ 0x0055, 0x054A },    /* R85    - DC Servo (2) */ 
 	{ 0x0057, 0x0000 },    /* R87    - DC Servo (4) */ 
-	{ 0x0058, 0x0000 },    /* R88    - DC Servo Readback */ 
 	{ 0x0060, 0x0000 },    /* R96    - Analogue HP (1) */ 
-	{ 0x0100, 0x0003 },    /* R256   - Chip Revision */ 
 	{ 0x0101, 0x8004 },    /* R257   - Control Interface */ 
 	{ 0x0110, 0x0000 },    /* R272   - Write Sequencer Ctrl (1) */ 
 	{ 0x0111, 0x0000 },    /* R273   - Write Sequencer Ctrl (2) */ 
@@ -292,7 +280,6 @@ static struct reg_default wm8994_defaults[] = {
 	{ 0x0209, 0x0000 },    /* R521   - Clocking (2) */ 
 	{ 0x0210, 0x0083 },    /* R528   - AIF1 Rate */ 
 	{ 0x0211, 0x0083 },    /* R529   - AIF2 Rate */ 
-	{ 0x0212, 0x0000 },    /* R530   - Rate Status */ 
 	{ 0x0220, 0x0000 },    /* R544   - FLL1 Control (1) */ 
 	{ 0x0221, 0x0000 },    /* R545   - FLL1 Control (2) */ 
 	{ 0x0222, 0x0000 },    /* R546   - FLL1 Control (3) */ 
@@ -445,9 +432,6 @@ static struct reg_default wm8994_defaults[] = {
 	{ 0x070A, 0xA101 },    /* R1802  - GPIO 11 */ 
 	{ 0x0720, 0x0000 },    /* R1824  - Pull Control (1) */ 
 	{ 0x0721, 0x0156 },    /* R1825  - Pull Control (2) */ 
-	{ 0x0730, 0x0000 },    /* R1840  - Interrupt Status 1 */ 
-	{ 0x0731, 0x0000 },    /* R1841  - Interrupt Status 2 */ 
-	{ 0x0732, 0x0000 },    /* R1842  - Interrupt Raw Status 2 */ 
 	{ 0x0738, 0x07FF },    /* R1848  - Interrupt Status 1 Mask */ 
 	{ 0x0739, 0xFFFF },    /* R1849  - Interrupt Status 2 Mask */ 
 	{ 0x0740, 0x0000 },    /* R1856  - Interrupt Control */ 
@@ -455,7 +439,6 @@ static struct reg_default wm8994_defaults[] = {
 };
 
 static struct reg_default wm8958_defaults[] = {
-	{ 0x0000, 0x8958 },    /* R0     - Software Reset */ 
 	{ 0x0001, 0x0000 },    /* R1     - Power Management (1) */
 	{ 0x0002, 0x6000 },    /* R2     - Power Management (2) */
 	{ 0x0003, 0x0000 },    /* R3     - Power Management (3) */
@@ -970,6 +953,7 @@ static bool wm8994_readable_register(struct device *dev, unsigned int reg)
 {
 	switch (reg) {
 	case WM8994_DC_SERVO_READBACK:
+	case WM8994_MICBIAS:
 	case WM8994_WRITE_SEQUENCER_CTRL_1:
 	case WM8994_WRITE_SEQUENCER_CTRL_2:
 	case WM8994_AIF1_ADC2_LEFT_VOLUME:

include/linux/i2c/twl.h

@@ -761,7 +761,7 @@ struct twl_regulator_driver_data {
 
 /*----------------------------------------------------------------------*/
 
-int twl4030_sih_setup(int module);
+int twl4030_sih_setup(struct device *dev, int module, int irq_base);
 
 /* Offsets to Power Registers */
 #define TWL4030_VDAC_DEV_GRP		0x3B

include/linux/mfd/abx500.h

@@ -34,13 +34,6 @@ struct device;
 #define AB5500_1_1	0x21
 #define AB5500_2_0	0x24
 
-/* AB8500 CIDs*/
-#define AB8500_CUT1P0	0x10
-#define AB8500_CUT1P1	0x11
-#define AB8500_CUT2P0	0x20
-#define AB8500_CUT3P0	0x30
-#define AB8500_CUT3P3	0x33
-
 /*
  * AB3100, EVENTA1, A2 and A3 event register flags
  * these are catenated into a single 32-bit flag in the code

include/linux/mfd/da9052/da9052.h

@@ -76,8 +76,6 @@ enum da9052_chip_id {
 struct da9052_pdata;
 
 struct da9052 {
-	struct mutex io_lock;
-
 	struct device *dev;
 	struct regmap *regmap;