Commit 3081dc9e authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'mvebu-soc-4.5-1' of git://git.infradead.org/linux-mvebu into next/multiplatform

Merge "mvebu soc for 4.5 (part 1)" from Gregory CLEMENT:

- orion5x/mv78xx0 multiplatform conversion
- legacy dove PMU support conversion

* tag 'mvebu-soc-4.5-1' of git://git.infradead.org/linux-mvebu:
  ARM: dove: convert legacy dove to PMU support
  soc: dove: add legacy support to PMU driver
  ARM: orion5x: multiplatform support
  ARM: orion5x: clean up mach/*.h headers
  ARM: mv78xx0: multiplatform support
  ARM: mv78xx0: clean up mach/*.h headers
  ARM: orion: use SPARSE_IRQ everywhere
  ARM: orion: always use MULTI_IRQ_HANDLER
  ARM: orion: move watchdog setup to mach-orion5x

Conflicts:
	arch/arm/Kconfig
	arch/arm/mach-dove/include/mach/entry-macro.S
	arch/arm/mach-orion5x/include/mach/entry-macro.S
parents 22ba14f4 c5d431e8
......@@ -493,40 +493,16 @@ config ARCH_DOVE
select CPU_PJ4
select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_PCI
select MULTI_IRQ_HANDLER
select MVEBU_MBUS
select PINCTRL
select PINCTRL_DOVE
select PLAT_ORION_LEGACY
select SPARSE_IRQ
select PM_GENERIC_DOMAINS if PM
help
Support for the Marvell Dove SoC 88AP510
config ARCH_MV78XX0
bool "Marvell MV78xx0"
select ARCH_REQUIRE_GPIOLIB
select CPU_FEROCEON
select GENERIC_CLOCKEVENTS
select MVEBU_MBUS
select PCI
select PLAT_ORION_LEGACY
help
Support for the following Marvell MV78xx0 series SoCs:
MV781x0, MV782x0.
config ARCH_ORION5X
bool "Marvell Orion"
depends on MMU
select ARCH_REQUIRE_GPIOLIB
select CPU_FEROCEON
select GENERIC_CLOCKEVENTS
select MVEBU_MBUS
select PCI
select PLAT_ORION_LEGACY
select MULTI_IRQ_HANDLER
help
Support for the following Marvell Orion 5x series SoCs:
Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
Orion-2 (5281), Orion-1-90 (6183).
config ARCH_KS8695
bool "Micrel/Kendin KS8695"
select ARCH_REQUIRE_GPIOLIB
......
......@@ -11,6 +11,9 @@ CONFIG_KPROBES=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_MULTI_V5=y
# CONFIG_ARCH_MULTI_V6 is not set
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_MV78XX0=y
CONFIG_MACH_DB78X00_BP=y
CONFIG_MACH_RD78X00_MASA=y
......
......@@ -13,6 +13,9 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_BSD_DISKLABEL=y
CONFIG_ARCH_MULTI_V5=y
# CONFIG_ARCH_MULTI_V6 is not set
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_ORION5X=y
CONFIG_ARCH_ORION5X_DT=y
CONFIG_MACH_DB88F5281=y
......
......@@ -88,6 +88,7 @@ static void __init cm_a510_init(void)
MACHINE_START(CM_A510, "Compulab CM-A510 Board")
.atag_offset = 0x100,
.nr_irqs = DOVE_NR_IRQS,
.init_machine = cm_a510_init,
.map_io = dove_map_io,
.init_early = dove_init_early,
......
......@@ -16,6 +16,7 @@
#include <linux/platform_data/dma-mv_xor.h>
#include <linux/platform_data/usb-ehci-orion.h>
#include <linux/platform_device.h>
#include <linux/soc/dove/pmu.h>
#include <asm/hardware/cache-tauros2.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......@@ -375,6 +376,47 @@ void __init dove_setup_cpu_wins(void)
DOVE_SCRATCHPAD_SIZE);
}
static struct resource orion_wdt_resource[] = {
DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x04),
DEFINE_RES_MEM(RSTOUTn_MASK_PHYS, 0x04),
};
static struct platform_device orion_wdt_device = {
.name = "orion_wdt",
.id = -1,
.num_resources = ARRAY_SIZE(orion_wdt_resource),
.resource = orion_wdt_resource,
};
static void __init __maybe_unused orion_wdt_init(void)
{
platform_device_register(&orion_wdt_device);
}
static const struct dove_pmu_domain_initdata pmu_domains[] __initconst = {
{
.pwr_mask = PMU_PWR_VPU_PWR_DWN_MASK,
.rst_mask = PMU_SW_RST_VIDEO_MASK,
.iso_mask = PMU_ISO_VIDEO_MASK,
.name = "vpu-domain",
}, {
.pwr_mask = PMU_PWR_GPU_PWR_DWN_MASK,
.rst_mask = PMU_SW_RST_GPU_MASK,
.iso_mask = PMU_ISO_GPU_MASK,
.name = "gpu-domain",
}, {
/* sentinel */
},
};
static const struct dove_pmu_initdata pmu_data __initconst = {
.pmc_base = DOVE_PMU_VIRT_BASE,
.pmu_base = DOVE_PMU_VIRT_BASE + 0x8000,
.irq = IRQ_DOVE_PMU,
.irq_domain_start = IRQ_DOVE_PMU_START,
.domains = pmu_domains,
};
void __init dove_init(void)
{
pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n",
......@@ -389,6 +431,7 @@ void __init dove_init(void)
dove_clk_init();
/* internal devices that every board has */
dove_init_pmu_legacy(&pmu_data);
dove_rtc_init();
dove_xor0_init();
dove_xor1_init();
......
......@@ -94,6 +94,7 @@ static void __init dove_db_init(void)
MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
.atag_offset = 0x100,
.nr_irqs = DOVE_NR_IRQS,
.init_machine = dove_db_init,
.map_io = dove_map_io,
.init_early = dove_init_early,
......
......@@ -11,6 +11,8 @@
#ifndef __ASM_ARCH_DOVE_H
#define __ASM_ARCH_DOVE_H
#include <mach/irqs.h>
/*
* Marvell Dove address maps.
*
......
/*
* arch/arm/mach-dove/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for Marvell Dove platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <mach/bridge-regs.h>
.macro get_irqnr_preamble, base, tmp
ldr \base, =IRQ_VIRT_BASE
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
@ check low interrupts
ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
mov \irqnr, #32
ands \irqstat, \irqstat, \tmp
@ if no low interrupts set, check high interrupts
ldreq \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
ldreq \tmp, [\base, #IRQ_MASK_HIGH_OFF]
moveq \irqnr, #64
andeqs \irqstat, \irqstat, \tmp
@ find first active interrupt source
clzne \irqstat, \irqstat
subne \irqnr, \irqnr, \irqstat
.endm
......@@ -90,7 +90,7 @@
#define NR_PMU_IRQS 7
#define IRQ_DOVE_RTC (IRQ_DOVE_PMU_START + 5)
#define NR_IRQS (IRQ_DOVE_PMU_START + NR_PMU_IRQS)
#define DOVE_NR_IRQS (IRQ_DOVE_PMU_START + NR_PMU_IRQS)
#endif
......@@ -51,22 +51,14 @@
#define CLOCK_GATING_GIGA_PHY_MASK (1 << CLOCK_GATING_BIT_GIGA_PHY)
#define PMU_INTERRUPT_CAUSE (DOVE_PMU_VIRT_BASE + 0x50)
#define PMU_INTERRUPT_MASK (DOVE_PMU_VIRT_BASE + 0x54)
static inline int pmu_to_irq(int pin)
{
if (pin < NR_PMU_IRQS)
return pin + IRQ_DOVE_PMU_START;
#define PMU_SW_RST_VIDEO_MASK BIT(16)
#define PMU_SW_RST_GPU_MASK BIT(18)
return -EINVAL;
}
#define PMU_PWR_GPU_PWR_DWN_MASK BIT(2)
#define PMU_PWR_VPU_PWR_DWN_MASK BIT(3)
static inline int irq_to_pmu(int irq)
{
if (IRQ_DOVE_PMU_START <= irq && irq < NR_IRQS)
return irq - IRQ_DOVE_PMU_START;
return -EINVAL;
}
#define PMU_ISO_VIDEO_MASK BIT(0)
#define PMU_ISO_GPU_MASK BIT(1)
#endif
......@@ -7,87 +7,15 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/exception.h>
#include <plat/irq.h>
#include <asm/mach/irq.h>
#include <mach/pm.h>
#include <mach/bridge-regs.h>
#include <plat/orion-gpio.h>
#include "common.h"
static void pmu_irq_mask(struct irq_data *d)
{
int pin = irq_to_pmu(d->irq);
u32 u;
u = readl(PMU_INTERRUPT_MASK);
u &= ~(1 << (pin & 31));
writel(u, PMU_INTERRUPT_MASK);
}
static void pmu_irq_unmask(struct irq_data *d)
{
int pin = irq_to_pmu(d->irq);
u32 u;
u = readl(PMU_INTERRUPT_MASK);
u |= 1 << (pin & 31);
writel(u, PMU_INTERRUPT_MASK);
}
static void pmu_irq_ack(struct irq_data *d)
{
int pin = irq_to_pmu(d->irq);
u32 u;
/*
* The PMU mask register is not RW0C: it is RW. This means that
* the bits take whatever value is written to them; if you write
* a '1', you will set the interrupt.
*
* Unfortunately this means there is NO race free way to clear
* these interrupts.
*
* So, let's structure the code so that the window is as small as
* possible.
*/
u = ~(1 << (pin & 31));
u &= readl_relaxed(PMU_INTERRUPT_CAUSE);
writel_relaxed(u, PMU_INTERRUPT_CAUSE);
}
static struct irq_chip pmu_irq_chip = {
.name = "pmu_irq",
.irq_mask = pmu_irq_mask,
.irq_unmask = pmu_irq_unmask,
.irq_ack = pmu_irq_ack,
};
static void pmu_irq_handler(struct irq_desc *desc)
{
unsigned long cause = readl(PMU_INTERRUPT_CAUSE);
unsigned int irq;
cause &= readl(PMU_INTERRUPT_MASK);
if (cause == 0) {
do_bad_IRQ(desc);
return;
}
for (irq = 0; irq < NR_PMU_IRQS; irq++) {
if (!(cause & (1 << irq)))
continue;
irq = pmu_to_irq(irq);
generic_handle_irq(irq);
}
}
static int __initdata gpio0_irqs[4] = {
IRQ_DOVE_GPIO_0_7,
IRQ_DOVE_GPIO_8_15,
......@@ -109,14 +37,6 @@ static int __initdata gpio2_irqs[4] = {
0,
};
#ifdef CONFIG_MULTI_IRQ_HANDLER
/*
* Compiling with both non-DT and DT support enabled, will
* break asm irq handler used by non-DT boards. Therefore,
* we provide a C-style irq handler even for non-DT boards,
* if MULTI_IRQ_HANDLER is set.
*/
static void __iomem *dove_irq_base = IRQ_VIRT_BASE;
static asmlinkage void
......@@ -139,18 +59,13 @@ __exception_irq_entry dove_legacy_handle_irq(struct pt_regs *regs)
return;
}
}
#endif
void __init dove_init_irq(void)
{
int i;
orion_irq_init(1, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
orion_irq_init(33, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
#ifdef CONFIG_MULTI_IRQ_HANDLER
set_handle_irq(dove_legacy_handle_irq);
#endif
/*
* Initialize gpiolib for GPIOs 0-71.
......@@ -163,17 +78,4 @@ void __init dove_init_irq(void)
orion_gpio_init(NULL, 64, 8, DOVE_GPIO2_VIRT_BASE, 0,
IRQ_DOVE_GPIO_START + 64, gpio2_irqs);
/*
* Mask and clear PMU interrupts
*/
writel(0, PMU_INTERRUPT_MASK);
writel(0, PMU_INTERRUPT_CAUSE);
for (i = IRQ_DOVE_PMU_START; i < NR_IRQS; i++) {
irq_set_chip_and_handler(i, &pmu_irq_chip, handle_level_irq);
irq_set_status_flags(i, IRQ_LEVEL);
irq_clear_status_flags(i, IRQ_NOREQUEST);
}
irq_set_chained_handler(IRQ_DOVE_PMU, pmu_irq_handler);
}
if ARCH_MV78XX0
menuconfig ARCH_MV78XX0
bool "Marvell MV78xx0" if ARCH_MULTI_V5
select ARCH_REQUIRE_GPIOLIB
select CPU_FEROCEON
select MVEBU_MBUS
select PCI
select PLAT_ORION_LEGACY
help
Support for the following Marvell MV78xx0 series SoCs:
MV781x0, MV782x0.
menu "Marvell MV78xx0 Implementations"
if ARCH_MV78XX0
config MACH_DB78X00_BP
bool "Marvell DB-78x00-BP Development Board"
......@@ -20,6 +29,4 @@ config MACH_TERASTATION_WXL
Say 'Y' here if you want your kernel to support the
Buffalo WXL Nas.
endmenu
endif
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
obj-y += common.o mpp.o irq.o pcie.o
obj-$(CONFIG_MACH_DB78X00_BP) += db78x00-bp-setup.o
obj-$(CONFIG_MACH_RD78X00_MASA) += rd78x00-masa-setup.o
......
/*
* arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
......@@ -9,7 +7,7 @@
#ifndef __ASM_ARCH_BRIDGE_REGS_H
#define __ASM_ARCH_BRIDGE_REGS_H
#include <mach/mv78xx0.h>
#include "mv78xx0.h"
#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104)
#define L2_WRITETHROUGH 0x00020000
......
......@@ -17,9 +17,9 @@
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
#include <linux/i2c.h>
#include <mach/mv78xx0.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "mv78xx0.h"
#include "common.h"
#include "mpp.h"
......@@ -146,6 +146,7 @@ subsys_initcall(wxl_pci_init);
MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL")
/* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */
.atag_offset = 0x100,
.nr_irqs = MV78XX0_NR_IRQS,
.init_machine = wxl_init,
.map_io = mv78xx0_map_io,
.init_early = mv78xx0_init_early,
......
......@@ -18,13 +18,13 @@
#include <asm/hardware/cache-feroceon-l2.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/mv78xx0.h>
#include <mach/bridge-regs.h>
#include <linux/platform_data/usb-ehci-orion.h>
#include <linux/platform_data/mtd-orion_nand.h>
#include <plat/time.h>
#include <plat/common.h>
#include <plat/addr-map.h>
#include "mv78xx0.h"
#include "bridge-regs.h"
#include "common.h"
static int get_tclk(void);
......
......@@ -15,9 +15,9 @@
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
#include <linux/i2c.h>
#include <mach/mv78xx0.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "mv78xx0.h"
#include "common.h"
static struct mv643xx_eth_platform_data db78x00_ge00_data = {
......@@ -94,6 +94,7 @@ subsys_initcall(db78x00_pci_init);
MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
.atag_offset = 0x100,
.nr_irqs = MV78XX0_NR_IRQS,
.init_machine = db78x00_init,
.map_io = mv78xx0_map_io,
.init_early = mv78xx0_init_early,
......
/*
* arch/arm/mach-mv78xx0/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for Marvell MV78xx0 platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <mach/bridge-regs.h>
.macro get_irqnr_preamble, base, tmp
ldr \base, =IRQ_VIRT_BASE
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
@ check low interrupts
ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
mov \irqnr, #31
ands \irqstat, \irqstat, \tmp
bne 1001f
@ if no low interrupts set, check high interrupts
ldr \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
ldr \tmp, [\base, #IRQ_MASK_HIGH_OFF]
mov \irqnr, #63
ands \irqstat, \irqstat, \tmp
bne 1001f
@ if no high interrupts set, check error interrupts
ldr \irqstat, [\base, #IRQ_CAUSE_ERR_OFF]
ldr \tmp, [\base, #IRQ_MASK_ERR_OFF]
mov \irqnr, #95
ands \irqstat, \irqstat, \tmp
@ find first active interrupt source
1001: clzne \irqstat, \irqstat
subne \irqnr, \irqnr, \irqstat
.endm
/*
* arch/arm/mach-mv78xx0/include/mach/hardware.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#include "mv78xx0.h"
#endif
/*
* arch/arm/mach-mv78xx0/include/mach/uncompress.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/serial_reg.h>
#include <mach/mv78xx0.h>
#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE)
static void putc(const char c)
{
unsigned char *base = SERIAL_BASE;
int i;
for (i = 0; i < 0x1000; i++) {
if (base[UART_LSR << 2] & UART_LSR_THRE)
break;
barrier();
}
base[UART_TX << 2] = c;
}
static void flush(void)
{
unsigned char *base = SERIAL_BASE;
unsigned char mask;
int i;
mask = UART_LSR_TEMT | UART_LSR_THRE;
for (i = 0; i < 0x1000; i++) {
if ((base[UART_LSR << 2] & mask) == mask)
break;
barrier();
}
}
/*
* nothing to do
*/
#define arch_decomp_setup()
......@@ -11,9 +11,10 @@
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <mach/bridge-regs.h>
#include <asm/exception.h>
#include <plat/orion-gpio.h>
#include <plat/irq.h>
#include "bridge-regs.h"
#include "common.h"
static int __initdata gpio0_irqs[4] = {
......@@ -23,12 +24,44 @@ static int __initdata gpio0_irqs[4] = {
IRQ_MV78XX0_GPIO_24_31,
};
static void __iomem *mv78xx0_irq_base = IRQ_VIRT_BASE;
static asmlinkage void
__exception_irq_entry mv78xx0_legacy_handle_irq(struct pt_regs *regs)
{
u32 stat;
stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_LOW_OFF);
stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_LOW_OFF);
if (stat) {
unsigned int hwirq = __fls(stat);
handle_IRQ(hwirq, regs);
return;
}
stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_HIGH_OFF);
stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_HIGH_OFF);
if (stat) {
unsigned int hwirq = 32 + __fls(stat);
handle_IRQ(hwirq, regs);
return;
}
stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_ERR_OFF);
stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_ERR_OFF);
if (stat) {
unsigned int hwirq = 64 + __fls(stat);
handle_IRQ(hwirq, regs);
return;
}
}
void __init mv78xx0_init_irq(void)
{
orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
orion_irq_init(64, IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF);
set_handle_irq(mv78xx0_legacy_handle_irq);
/*
* Initialize gpiolib for GPIOs 0-31. (The GPIO interrupt mask
* registers for core #1 are at an offset of 0x18 from those of
......
/*
* arch/arm/mach-mv78xx0/include/mach/irqs.h
*
* IRQ definitions for Marvell MV78xx0 SoCs
*
* This file is licensed under the terms of the GNU General Public
......@@ -88,7 +86,7 @@
#define IRQ_MV78XX0_GPIO_START 96
#define NR_GPIO_IRQS 32
#define NR_IRQS (IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS)
#define MV78XX0_NR_IRQS (IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS)
#endif
......@@ -12,7 +12,7 @@
#include <linux/init.h>
#include <linux/io.h>
#include <plat/mpp.h>
#include <mach/hardware.h>
#include "mv78xx0.h"
#include "common.h"
#include "mpp.h"
......
/*
* arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
*
* Generic definitions for Marvell MV78xx0 SoC flavors:
* MV781x0 and MV782x0.
*
......@@ -12,6 +10,8 @@
#ifndef __ASM_ARCH_MV78XX0_H
#define __ASM_ARCH_MV78XX0_H
#include "irqs.h"
/*
* Marvell MV78xx0 address maps.
*
......
......@@ -15,7 +15,7 @@
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <plat/pcie.h>
#include <mach/mv78xx0.h>
#include "mv78xx0.h"
#include "common.h"
#define MV78XX0_MBUS_PCIE_MEM_TARGET(port, lane) ((port) ? 8 : 4)
......
......@@ -14,9 +14,9 @@
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
#include <mach/mv78xx0.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "mv78xx0.h"
#include "common.h"
static struct mv643xx_eth_platform_data rd78x00_masa_ge00_data = {
......@@ -79,6 +79,7 @@ subsys_initcall(rd78x00_pci_init);
MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
.atag_offset = 0x100,
.nr_irqs = MV78XX0_NR_IRQS,
.init_machine = rd78x00_masa_init,
.map_io = mv78xx0_map_io,
.init_early = mv78xx0_init_early,
......
if ARCH_ORION5X
menuconfig ARCH_ORION5X
bool "Marvell Orion"
depends on MMU && ARCH_MULTI_V5
select ARCH_REQUIRE_GPIOLIB
select CPU_FEROCEON
select GENERIC_CLOCKEVENTS
select MVEBU_MBUS
select PCI
select PLAT_ORION_LEGACY
help
Support for the following Marvell Orion 5x series SoCs:
Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
Orion-2 (5281), Orion-1-90 (6183).
menu "Orion Implementations"
if ARCH_ORION5X
config ARCH_ORION5X_DT
bool "Marvell Orion5x Flattened Device Tree"
......@@ -163,6 +175,4 @@ config MACH_RD88F6183AP_GE
Say 'Y' here if you want your kernel to support the
Marvell Orion-1-90 (88F6183) AP GE RD.
endmenu
endif
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
obj-y += common.o pci.o irq.o mpp.o
obj-$(CONFIG_MACH_DB88F5281) += db88f5281-setup.o
obj-$(CONFIG_MACH_RD88F5182) += rd88f5182-setup.o
......
......@@ -20,9 +20,9 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
#include <plat/orion-gpio.h>
#include "common.h"
#include "orion5x.h"
/*****************************************************************************
* LaCie d2 Network Info
......
......@@ -20,10 +20,10 @@
#include <asm/system_misc.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/orion5x.h>
#include <mach/bridge-regs.h>
#include <plat/irq.h>
#include <plat/time.h>
#include "orion5x.h"
#include "bridge-regs.h"
#include "common.h"
static struct of_dev_auxdata orion5x_auxdata_lookup[] __initdata = {
......
......@@ -17,8 +17,8 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
#include <mach/bridge-regs.h>
#include "orion5x.h"
#include "bridge-regs.h"
#include "common.h"
/*****************************************************************************
......
......@@ -18,8 +18,8 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
#include "common.h"
#include "orion5x.h"
/*****************************************************************************
* RD-88F5182 Info
......
/*
* arch/arm/mach-orion5x/include/mach/bridge-regs.h
*
* Orion CPU Bridge Registers
*
* This file is licensed under the terms of the GNU General Public
......@@ -11,7 +9,7 @@
#ifndef __ASM_ARCH_BRIDGE_REGS_H
#define __ASM_ARCH_BRIDGE_REGS_H
#include <mach/orion5x.h>
#include "orion5x.h"
#define CPU_CONF (ORION5X_BRIDGE_VIRT_BASE + 0x100)
......
......@@ -27,14 +27,14 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/bridge-regs.h>
#include <mach/hardware.h>
#include <mach/orion5x.h>
#include <linux/platform_data/mtd-orion_nand.h>
#include <linux/platform_data/usb-ehci-orion.h>
#include <plat/time.h>
#include <plat/common.h>
#include "bridge-regs.h"
#include "common.h"
#include "orion5x.h"
/*****************************************************************************
* I/O Address Mapping
......@@ -184,9 +184,21 @@ static void __init orion5x_crypto_init(void)
/*****************************************************************************
* Watchdog
****************************************************************************/
static struct resource orion_wdt_resource[] = {
DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x04),
DEFINE_RES_MEM(RSTOUTn_MASK_PHYS, 0x04),
};
static struct platform_device orion_wdt_device = {
.name = "orion_wdt",
.id = -1,
.num_resources = ARRAY_SIZE(orion_wdt_resource),
.resource = orion_wdt_resource,
};
static void __init orion5x_wdt_init(void)
{
orion_wdt_init();
platform_device_register(&orion_wdt_device);
}
......
......@@ -23,10 +23,10 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
#include <linux/platform_data/mtd-orion_nand.h>
#include "common.h"
#include "mpp.h"
#include "orion5x.h"
/*****************************************************************************
* DB-88F5281 on board devices
......@@ -369,6 +369,7 @@ static void __init db88f5281_init(void)
MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
/* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
.atag_offset = 0x100,
.nr_irqs = ORION5X_NR_IRQS,
.init_machine = db88f5281_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
......
......@@ -33,8 +33,8 @@
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <asm/system_info.h>
#include <mach/orion5x.h>
#include <plat/orion-gpio.h>
#include "orion5x.h"
#include "common.h"
#include "mpp.h"
......@@ -666,6 +666,7 @@ static void __init dns323_init(void)
MACHINE_START(DNS323, "D-Link DNS-323")
/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
.atag_offset = 0x100,
.nr_irqs = ORION5X_NR_IRQS,
.init_machine = dns323_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
......
/*
* arch/arm/mach-orion5x/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for Orion platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <mach/bridge-regs.h>
.macro get_irqnr_preamble, base, tmp
ldr \base, =MAIN_IRQ_CAUSE
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, [\base, #0] @ main cause
ldr \tmp, [\base, #(MAIN_IRQ_MASK - MAIN_IRQ_CAUSE)] @ main mask
mov \irqnr, #0 @ default irqnr
@ find cause bits that are unmasked
ands \irqstat, \irqstat, \tmp @ clear Z flag if any
clzne \irqnr, \irqstat @ calc irqnr
rsbne \irqnr, \irqnr, #32
.endm
/*
* arch/arm/mach-orion5x/include/mach/hardware.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#include "orion5x.h"
#endif
/*
* arch/arm/mach-orion5x/include/mach/uncompress.h
*
* Tzachi Perelstein <tzachi@marvell.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/serial_reg.h>
#include <mach/orion5x.h>
#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE)
static void putc(const char c)
{
unsigned char *base = SERIAL_BASE;
int i;
for (i = 0; i < 0x1000; i++) {
if (base[UART_LSR << 2] & UART_LSR_THRE)
break;
barrier();
}
base[UART_TX << 2] = c;
}
static void flush(void)
{
unsigned char *base = SERIAL_BASE;
unsigned char mask;
int i;
mask = UART_LSR_TEMT | UART_LSR_THRE;
for (i = 0; i < 0x1000; i++) {
if ((base[UART_LSR << 2] & mask) == mask)
break;
barrier();
}
}
/*
* nothing to do
*/
#define arch_decomp_setup()
......@@ -13,10 +13,10 @@
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <mach/bridge-regs.h>
#include <plat/orion-gpio.h>
#include <plat/irq.h>
#include <asm/exception.h>
#include "bridge-regs.h"
#include "common.h"
static int __initdata gpio0_irqs[4] = {
......@@ -26,14 +26,6 @@ static int __initdata gpio0_irqs[4] = {
IRQ_ORION5X_GPIO_24_31,
};
#ifdef CONFIG_MULTI_IRQ_HANDLER
/*
* Compiling with both non-DT and DT support enabled, will
* break asm irq handler used by non-DT boards. Therefore,
* we provide a C-style irq handler even for non-DT boards,
* if MULTI_IRQ_HANDLER is set.
*/
asmlinkage void
__exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs)
{
......@@ -47,15 +39,12 @@ __exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs)
return;
}
}
#endif
void __init orion5x_init_irq(void)
{
orion_irq_init(1, MAIN_IRQ_MASK);
#ifdef CONFIG_MULTI_IRQ_HANDLER
set_handle_irq(orion5x_legacy_handle_irq);
#endif
/*
* Initialize gpiolib for GPIOs 0-31.
......
/*
* arch/arm/mach-orion5x/include/mach/irqs.h
*
* IRQ definitions for Orion SoC
*
* Maintainer: Tzachi Perelstein <tzachi@marvell.com>
......@@ -54,7 +52,7 @@
#define IRQ_ORION5X_GPIO_START 33
#define NR_GPIO_IRQS 32
#define NR_IRQS (IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS)
#define ORION5X_NR_IRQS (IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS)
#endif
......@@ -23,10 +23,10 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
#include <linux/platform_data/mtd-orion_nand.h>
#include "common.h"
#include "mpp.h"
#include "orion5x.h"
/*****************************************************************************
* KUROBOX-PRO Info
......@@ -383,6 +383,7 @@ static void __init kurobox_pro_init(void)
MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
.atag_offset = 0x100,
.nr_irqs = ORION5X_NR_IRQS,
.init_machine = kurobox_pro_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
......@@ -397,6 +398,7 @@ MACHINE_END
MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live")
/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
.atag_offset = 0x100,
.nr_irqs = ORION5X_NR_IRQS,
.init_machine = kurobox_pro_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
......
......@@ -22,9 +22,9 @@
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
#include "orion5x.h"
/*****************************************************************************
* Linkstation LS-CHL Info
......@@ -320,6 +320,7 @@ static void __init lschl_init(void)
MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)")
/* Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk> */
.atag_offset = 0x100,
.nr_irqs = ORION5X_NR_IRQS,
.init_machine = lschl_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
......
......@@ -21,9 +21,9 @@
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
#include "orion5x.h"
/*****************************************************************************
* Linkstation LS-HGL Info
......@@ -267,6 +267,7 @@ static void __init ls_hgl_init(void)
MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
/* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */
.atag_offset = 0x100,
.nr_irqs = ORION5X_NR_IRQS,
.init_machine = ls_hgl_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
......
......@@ -11,8 +11,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <plat/mpp.h>
#include "orion5x.h"
#include "mpp.h"
#include "common.h"
......
......@@ -21,9 +21,9 @@
#include <linux/ata_platform.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
#include "orion5x.h"
#define MV2120_NOR_BOOT_BASE 0xf4000000
#define MV2120_NOR_BOOT_SIZE SZ_512K
......@@ -232,6 +232,7 @@ static void __init mv2120_init(void)
MACHINE_START(MV2120, "HP Media Vault mv2120")
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
.atag_offset = 0x100,
.nr_irqs = ORION5X_NR_IRQS,
.init_machine = mv2120_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
......
......@@ -24,10 +24,10 @@
#include <linux/delay.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/orion5x.h>
#include <plat/orion-gpio.h>
#include "common.h"
#include "mpp.h"
#include "orion5x.h"
/*****************************************************************************
* LaCie 2Big Network Info
......@@ -423,6 +423,7 @@ static void __init net2big_init(void)
/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
MACHINE_START(NET2BIG, "LaCie 2Big Network")
.atag_offset = 0x100,
.nr_irqs = ORION5X_NR_IRQS,
.init_machine = net2big_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
......
/*
* arch/arm/mach-orion5x/include/mach/orion5x.h
*
* Generic definitions of Orion SoC flavors:
* Orion-1, Orion-VoIP, Orion-NAS, Orion-2, and Orion-1-90.
*
......@@ -14,6 +12,8 @@
#ifndef __ASM_ARCH_ORION5X_H
#define __ASM_ARCH_ORION5X_H
#include "irqs.h"
/*****************************************************************************
* Orion Address Maps
*
......
......@@ -19,8 +19,8 @@
#include <asm/mach/pci.h>
#include <plat/pcie.h>
#include <plat/addr-map.h>
#include <mach/orion5x.h>
#include "common.h"
#include "orion5x.h"
/*****************************************************************************
* Orion has one PCIe controller and one PCI controller.
......
......@@ -20,9 +20,9 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
#include "orion5x.h"
/*****************************************************************************
* RD-88F5181L FXO Info
......@@ -169,6 +169,7 @@ subsys_initcall(rd88f5181l_fxo_pci_init);
MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
/* Maintainer: Nicolas Pitre <nico@marvell.com> */
.atag_offset = 0x100,
.nr_irqs = ORION5X_NR_IRQS,
.init_machine = rd88f5181l_fxo_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
......
......@@ -21,9 +21,9 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
#include "orion5x.h"
/*****************************************************************************
* RD-88F5181L GE Info
......@@ -181,6 +181,7 @@ subsys_initcall(rd88f5181l_ge_pci_init);
MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
.atag_offset = 0x100,
.nr_irqs = ORION5X_NR_IRQS,
.init_machine = rd88f5181l_ge_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
......
......@@ -23,9 +23,9 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
#include "orion5x.h"
/*****************************************************************************
* RD-88F5182 Info
......@@ -281,6 +281,7 @@ static void __init rd88f5182_init(void)
MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
.atag_offset = 0x100,
.nr_irqs = ORION5X_NR_IRQS,
.init_machine = rd88f5182_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
......
......@@ -22,8 +22,8 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
#include "common.h"
#include "orion5x.h"
static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = {
.phy_addr = -1,
......@@ -119,6 +119,7 @@ subsys_initcall(rd88f6183ap_ge_pci_init);
MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
.atag_offset = 0x100,
.nr_irqs = ORION5X_NR_IRQS,
.init_machine = rd88f6183ap_ge_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
......
......@@ -22,9 +22,9 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
#include "orion5x.h"
/*****************************************************************************
* Terastation Pro 2/Live Info
......@@ -359,6 +359,7 @@ static void __init tsp2_init(void)
MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
/* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */
.atag_offset = 0x100,
.nr_irqs = ORION5X_NR_IRQS,
.init_machine = tsp2_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
......
......@@ -25,9 +25,9 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
#include "orion5x.h"
#include "tsx09-common.h"
#define QNAP_TS209_NOR_BOOT_BASE 0xf4000000
......@@ -324,6 +324,7 @@ static void __init qnap_ts209_init(void)
MACHINE_START(TS209, "QNAP TS-109/TS-209")
/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
.atag_offset = 0x100,
.nr_irqs = ORION5X_NR_IRQS,
.init_machine = qnap_ts209_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
......
......@@ -27,9 +27,9 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
#include "orion5x.h"
#include "tsx09-common.h"
/*****************************************************************************
......@@ -313,6 +313,7 @@ static void __init qnap_ts409_init(void)
MACHINE_START(TS409, "QNAP TS-409")
/* Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com> */
.atag_offset = 0x100,
.nr_irqs = ORION5X_NR_IRQS,
.init_machine = qnap_ts409_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
......
......@@ -23,9 +23,9 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
#include "orion5x.h"
#include "ts78xx-fpga.h"
/*****************************************************************************
......@@ -615,6 +615,7 @@ static void __init ts78xx_init(void)
MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
/* Maintainer: Alexander Clouter <alex@digriz.org.uk> */
.atag_offset = 0x100,
.nr_irqs = ORION5X_NR_IRQS,
.init_machine = ts78xx_init,
.map_io = ts78xx_map_io,
.init_early = orion5x_init_early,
......
......@@ -15,7 +15,7 @@
#include <linux/mv643xx_eth.h>
#include <linux/timex.h>
#include <linux/serial_reg.h>
#include <mach/orion5x.h>
#include "orion5x.h"
#include "tsx09-common.h"
#include "common.h"
......
......@@ -19,7 +19,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
#include "orion5x.h"
#include "common.h"
#include "mpp.h"
......@@ -174,6 +174,7 @@ subsys_initcall(wnr854t_pci_init);
MACHINE_START(WNR854T, "Netgear WNR854T")
/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
.atag_offset = 0x100,
.nr_irqs = ORION5X_NR_IRQS,
.init_machine = wnr854t_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
......
......@@ -22,7 +22,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
#include "orion5x.h"
#include "common.h"
#include "mpp.h"
......@@ -262,6 +262,7 @@ subsys_initcall(wrt350n_v2_pci_init);
MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
.atag_offset = 0x100,
.nr_irqs = ORION5X_NR_IRQS,
.init_machine = wrt350n_v2_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
......
......@@ -21,7 +21,6 @@
#include <net/dsa.h>
#include <linux/platform_data/dma-mv_xor.h>
#include <linux/platform_data/usb-ehci-orion.h>
#include <mach/bridge-regs.h>
#include <plat/common.h>
/* Create a clkdev entry for a given device/clk */
......@@ -588,26 +587,6 @@ void __init orion_spi_1_init(unsigned long mapbase)
platform_device_register(&orion_spi_1);
}
/*****************************************************************************
* Watchdog
****************************************************************************/
static struct resource orion_wdt_resource[] = {
DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x04),
DEFINE_RES_MEM(RSTOUTn_MASK_PHYS, 0x04),
};
static struct platform_device orion_wdt_device = {
.name = "orion_wdt",
.id = -1,
.num_resources = ARRAY_SIZE(orion_wdt_resource),
.resource = orion_wdt_resource,
};
void __init orion_wdt_init(void)
{
platform_device_register(&orion_wdt_device);
}
/*****************************************************************************
* XOR
****************************************************************************/
......
......@@ -75,8 +75,6 @@ void __init orion_spi_init(unsigned long mapbase);
void __init orion_spi_1_init(unsigned long mapbase);
void __init orion_wdt_init(void);
void __init orion_xor0_init(unsigned long mapbase_low,
unsigned long mapbase_high,
unsigned long irq_0,
......
......@@ -18,7 +18,6 @@
#include <asm/exception.h>
#include <plat/irq.h>
#include <plat/orion-gpio.h>
#include <mach/bridge-regs.h>
void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr)
{
......
......@@ -13,7 +13,6 @@
#include <linux/mbus.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
#include <plat/orion-gpio.h>
#include <plat/mpp.h>
......
......@@ -3,6 +3,7 @@
#
obj-$(CONFIG_SOC_BRCMSTB) += brcmstb/
obj-$(CONFIG_ARCH_DOVE) += dove/
obj-$(CONFIG_MACH_DOVE) += dove/
obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
obj-$(CONFIG_ARCH_QCOM) += qcom/
......
......@@ -305,6 +305,49 @@ static int __init dove_init_pmu_irq(struct pmu_data *pmu, int irq)
return 0;
}
int __init dove_init_pmu_legacy(const struct dove_pmu_initdata *initdata)
{
const struct dove_pmu_domain_initdata *domain_initdata;
struct pmu_data *pmu;
int ret;
pmu = kzalloc(sizeof(*pmu), GFP_KERNEL);
if (!pmu)
return -ENOMEM;
spin_lock_init(&pmu->lock);
pmu->pmc_base = initdata->pmc_base;
pmu->pmu_base = initdata->pmu_base;
pmu_reset_init(pmu);
for (domain_initdata = initdata->domains; domain_initdata->name;
domain_initdata++) {
struct pmu_domain *domain;
domain = kzalloc(sizeof(*domain), GFP_KERNEL);
if (domain) {
domain->pmu = pmu;
domain->pwr_mask = domain_initdata->pwr_mask;
domain->rst_mask = domain_initdata->rst_mask;
domain->iso_mask = domain_initdata->iso_mask;
domain->base.name = domain_initdata->name;
__pmu_domain_register(domain, NULL);
}
}
ret = dove_init_pmu_irq(pmu, initdata->irq);
if (ret)
pr_err("dove_init_pmu_irq() failed: %d\n", ret);
if (pmu->irq_domain)
irq_domain_associate_many(pmu->irq_domain,
initdata->irq_domain_start,
0, NR_PMU_IRQS);
return 0;
}
/*
* pmu: power-manager@d0000 {
* compatible = "marvell,dove-pmu";
......
#ifndef LINUX_SOC_DOVE_PMU_H
#define LINUX_SOC_DOVE_PMU_H
#include <linux/types.h>
struct dove_pmu_domain_initdata {
u32 pwr_mask;
u32 rst_mask;
u32 iso_mask;
const char *name;
};
struct dove_pmu_initdata {
void __iomem *pmc_base;
void __iomem *pmu_base;
int irq;
int irq_domain_start;
const struct dove_pmu_domain_initdata *domains;
};
int dove_init_pmu_legacy(const struct dove_pmu_initdata *);
int dove_init_pmu(void);
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment