Commit 30e196ca authored by James Smart's avatar James Smart Committed by Martin K. Petersen

scsi: lpfc: Fix LOGO/PLOGI handling when triggerd by ABTS Timeout event

After a LOGO in response to an ABTS timeout, a PLOGI wasn't issued to
re-establish the login.  An nlp_type check in the LOGO completion
handler failed to restart discovery for NVME targets.  Revised the
nlp_type check for NVME as well as SCSI.

While reviewing the LOGO handling a few other issues were seen and
were addressed:

- Better lock synchronization around ndlp data types

- When the ABTS times out, unregister the RPI before sending the LOGO
  so that all local exchange contexts are cleared and nothing received
  while awaiting LOGO/PLOGI handling will be accepted.

- LOGO handling optimized to:
   Wait only R_A_TOV for a response.
   It doesn't need to be retried on timeout. If there wasn't a
     response, a PLOGI will be sent, thus an implicit logout
     applies as well when the other port sees it.
   If there is a response, any kind of response is considered "good"
     and the XRI quarantined for a exchange qualifier window.

- PLOGI is issued as soon a LOGO state is resolved.
Signed-off-by: default avatarDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: default avatarJames Smart <jsmart2021@gmail.com>
Reviewed-by: default avatarHannes Reinecke <hare@suse.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent 3952e91f
......@@ -242,6 +242,8 @@ lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp,
icmd->ulpCommand = CMD_ELS_REQUEST64_CR;
if (elscmd == ELS_CMD_FLOGI)
icmd->ulpTimeout = FF_DEF_RATOV * 2;
else if (elscmd == ELS_CMD_LOGO)
icmd->ulpTimeout = phba->fc_ratov;
else
icmd->ulpTimeout = phba->fc_ratov * 2;
} else {
......@@ -2682,16 +2684,15 @@ lpfc_cmpl_els_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
goto out;
}
/* The LOGO will not be retried on failure. A LOGO was
* issued to the remote rport and a ACC or RJT or no Answer are
* all acceptable. Note the failure and move forward with
* discovery. The PLOGI will retry.
*/
if (irsp->ulpStatus) {
/* Check for retry */
if (lpfc_els_retry(phba, cmdiocb, rspiocb)) {
/* ELS command is being retried */
skip_recovery = 1;
goto out;
}
/* LOGO failed */
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
"2756 LOGO failure DID:%06X Status:x%x/x%x\n",
"2756 LOGO failure, No Retry DID:%06X Status:x%x/x%x\n",
ndlp->nlp_DID, irsp->ulpStatus,
irsp->un.ulpWord[4]);
/* Do not call DSM for lpfc_els_abort'ed ELS cmds */
......@@ -2737,7 +2738,8 @@ lpfc_cmpl_els_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
* For any other port type, the rpi is unregistered as an implicit
* LOGO.
*/
if ((ndlp->nlp_type & NLP_FCP_TARGET) && (skip_recovery == 0)) {
if (ndlp->nlp_type & (NLP_FCP_TARGET | NLP_NVME_TARGET) &&
skip_recovery == 0) {
lpfc_cancel_retry_delay_tmo(vport, ndlp);
spin_lock_irqsave(shost->host_lock, flags);
ndlp->nlp_flag |= NLP_NPR_2B_DISC;
......@@ -2770,6 +2772,8 @@ lpfc_cmpl_els_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
* will be stored into the context1 field of the IOCB for the completion
* callback function to the LOGO ELS command.
*
* Callers of this routine are expected to unregister the RPI first
*
* Return code
* 0 - successfully issued logo
* 1 - failed to issue logo
......@@ -2811,22 +2815,6 @@ lpfc_issue_els_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
"Issue LOGO: did:x%x",
ndlp->nlp_DID, 0, 0);
/*
* If we are issuing a LOGO, we may try to recover the remote NPort
* by issuing a PLOGI later. Even though we issue ELS cmds by the
* VPI, if we have a valid RPI, and that RPI gets unreg'ed while
* that ELS command is in-flight, the HBA returns a IOERR_INVALID_RPI
* for that ELS cmd. To avoid this situation, lets get rid of the
* RPI right now, before any ELS cmds are sent.
*/
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_ISSUE_LOGO;
spin_unlock_irq(shost->host_lock);
if (lpfc_unreg_rpi(vport, ndlp)) {
lpfc_els_free_iocb(phba, elsiocb);
return 0;
}
phba->fc_stat.elsXmitLOGO++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_logo;
spin_lock_irq(shost->host_lock);
......@@ -2834,7 +2822,6 @@ lpfc_issue_els_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
ndlp->nlp_flag &= ~NLP_ISSUE_LOGO;
spin_unlock_irq(shost->host_lock);
rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_LOGO_SND;
......@@ -2842,6 +2829,11 @@ lpfc_issue_els_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
lpfc_els_free_iocb(phba, elsiocb);
return 1;
}
spin_lock_irq(shost->host_lock);
ndlp->nlp_prev_state = ndlp->nlp_state;
spin_unlock_irq(shost->host_lock);
lpfc_nlp_set_state(vport, ndlp, NLP_STE_LOGO_ISSUE);
return 0;
}
......@@ -9505,7 +9497,8 @@ lpfc_sli_abts_recover_port(struct lpfc_vport *vport,
"rport in state 0x%x\n", ndlp->nlp_state);
return;
}
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
lpfc_printf_log(phba, KERN_ERR,
LOG_ELS | LOG_FCP_ERROR | LOG_NVME_IOERR,
"3094 Start rport recovery on shost id 0x%x "
"fc_id 0x%06x vpi 0x%x rpi 0x%x state 0x%x "
"flags 0x%x\n",
......@@ -9518,8 +9511,8 @@ lpfc_sli_abts_recover_port(struct lpfc_vport *vport,
*/
spin_lock_irqsave(shost->host_lock, flags);
ndlp->nlp_fcp_info &= ~NLP_FCP_2_DEVICE;
ndlp->nlp_flag |= NLP_ISSUE_LOGO;
spin_unlock_irqrestore(shost->host_lock, flags);
lpfc_issue_els_logo(vport, ndlp, 0);
lpfc_nlp_set_state(vport, ndlp, NLP_STE_LOGO_ISSUE);
lpfc_unreg_rpi(vport, ndlp);
}
......@@ -836,7 +836,9 @@ lpfc_disc_set_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
if (!(ndlp->nlp_flag & NLP_RPI_REGISTERED)) {
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_NPR_ADISC;
spin_unlock_irq(shost->host_lock);
return 0;
}
......@@ -851,7 +853,10 @@ lpfc_disc_set_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
return 1;
}
}
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_NPR_ADISC;
spin_unlock_irq(shost->host_lock);
lpfc_unreg_rpi(vport, ndlp);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment