Commit 31491e1a authored by Al Viro's avatar Al Viro

advansys: fix buggered formats - unsigned long != u32 on 64bit

asc_prt_line() had been hiding several places where formats had not
matched the argument types.  The previous commit has finally made them
visible...
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
parent b59fb6fd
......@@ -3345,7 +3345,7 @@ static void asc_prt_driver_conf(struct seq_file *m, struct Scsi_Host *shost)
shost->host_no);
seq_printf(m,
" host_busy %u, last_reset %u, max_id %u, max_lun %u, max_channel %u\n",
" host_busy %u, last_reset %lu, max_id %u, max_lun %u, max_channel %u\n",
shost->host_busy, shost->last_reset, shost->max_id,
shost->max_lun, shost->max_channel);
......@@ -3359,11 +3359,11 @@ static void asc_prt_driver_conf(struct seq_file *m, struct Scsi_Host *shost)
shost->unchecked_isa_dma, shost->use_clustering);
seq_printf(m,
" flags 0x%x, last_reset 0x%x, jiffies 0x%x, asc_n_io_port 0x%x\n",
" flags 0x%x, last_reset 0x%lx, jiffies 0x%lx, asc_n_io_port 0x%x\n",
boardp->flags, boardp->last_reset, jiffies,
boardp->asc_n_io_port);
seq_printf(m, " io_port 0x%x\n", shost->io_port);
seq_printf(m, " io_port 0x%lx\n", shost->io_port);
if (ASC_NARROW_BOARD(boardp)) {
chip_scsi_id = boardp->dvc_cfg.asc_dvc_cfg.chip_scsi_id;
......@@ -3539,7 +3539,7 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost)
seq_printf(m,
" iop_base 0x%lx, cable_detect: %X, err_code %u\n",
v->iop_base,
(unsigned long)v->iop_base,
AdvReadWordRegister(iop_base,IOPW_SCSI_CFG1) & CABLE_DETECT,
v->err_code);
......@@ -3670,7 +3670,7 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost)
period = (((lramword >> 8) * 25) + 50) / 4;
if (period == 0) { /* Should never happen. */
seq_printf(m, "%d (? Mhz), ");
seq_printf(m, "%d (? Mhz), ", period);
} else {
seq_printf(m,
"%d (%d.%d Mhz),",
......@@ -3711,17 +3711,17 @@ static void asc_prt_board_stats(struct seq_file *m, struct Scsi_Host *shost)
shost->host_no);
seq_printf(m,
" queuecommand %lu, reset %lu, biosparam %lu, interrupt %lu\n",
" queuecommand %u, reset %u, biosparam %u, interrupt %u\n",
s->queuecommand, s->reset, s->biosparam,
s->interrupt);
seq_printf(m,
" callback %lu, done %lu, build_error %lu, build_noreq %lu, build_nosg %lu\n",
" callback %u, done %u, build_error %u, build_noreq %u, build_nosg %u\n",
s->callback, s->done, s->build_error,
s->adv_build_noreq, s->adv_build_nosg);
seq_printf(m,
" exe_noerror %lu, exe_busy %lu, exe_error %lu, exe_unknown %lu\n",
" exe_noerror %u, exe_busy %u, exe_error %u, exe_unknown %u\n",
s->exe_noerror, s->exe_busy, s->exe_error,
s->exe_unknown);
......@@ -3729,22 +3729,22 @@ static void asc_prt_board_stats(struct seq_file *m, struct Scsi_Host *shost)
* Display data transfer statistics.
*/
if (s->xfer_cnt > 0) {
seq_printf(m, " xfer_cnt %lu, xfer_elem %lu, ",
seq_printf(m, " xfer_cnt %u, xfer_elem %u, ",
s->xfer_cnt, s->xfer_elem);
seq_printf(m, "xfer_bytes %lu.%01lu kb\n",
seq_printf(m, "xfer_bytes %u.%01u kb\n",
s->xfer_sect / 2, ASC_TENTHS(s->xfer_sect, 2));
/* Scatter gather transfer statistics */
seq_printf(m, " avg_num_elem %lu.%01lu, ",
seq_printf(m, " avg_num_elem %u.%01u, ",
s->xfer_elem / s->xfer_cnt,
ASC_TENTHS(s->xfer_elem, s->xfer_cnt));
seq_printf(m, "avg_elem_size %lu.%01lu kb, ",
seq_printf(m, "avg_elem_size %u.%01u kb, ",
(s->xfer_sect / 2) / s->xfer_elem,
ASC_TENTHS((s->xfer_sect / 2), s->xfer_elem));
seq_printf(m, "avg_xfer_size %lu.%01lu kb\n",
seq_printf(m, "avg_xfer_size %u.%01u kb\n",
(s->xfer_sect / 2) / s->xfer_cnt,
ASC_TENTHS((s->xfer_sect / 2), s->xfer_cnt));
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment