Merge tag 'drm-misc-next-fixes-2020-04-04' of...

Merge tag 'drm-misc-next-fixes-2020-04-04' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

A bunch of fixes to avoid null pointer dereference in fbcon, fix a return
in xen, some DT bindings fixes, a vc4 issue with 1920x1200 mode validation,
and a conflicting framebuffer in vboxvideo.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200404090057.a3m7uw6tavwtcyon@gilmour.lan

Documentation/devicetree/bindings/display/panel/panel-dpi.yaml

@@ -21,15 +21,6 @@ properties:
       - {}
       - const: panel-dpi
 
-  data-mapping:
-    enum:
-      - rgb24
-      - rgb565
-      - bgr666
-    description: |
-      Describes the media format, how the display panel is connected
-      to the display interface.
-
   backlight: true
   enable-gpios: true
   height-mm: true
@@ -52,7 +43,6 @@ examples:
         compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
         label = "osddisplay";
         power-supply = <&vcc_supply>;
-        data-mapping = "rgb565";
         backlight = <&backlight>;
 
         port {

Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml

@@ -65,7 +65,7 @@ properties:
   ports:
     type: object
     description:
-      Ports as described in Documentation/devictree/bindings/graph.txt
+      Ports as described in Documentation/devicetree/bindings/graph.txt
     properties:
       "#address-cells":
         const: 1
@@ -121,7 +121,7 @@ examples:
     #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
-    dss: dss@04a00000 {
+    dss: dss@4a00000 {
             compatible = "ti,am65x-dss";
             reg =   <0x0 0x04a00000 0x0 0x1000>, /* common */
                     <0x0 0x04a02000 0x0 0x1000>, /* vidl1 */

Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml

@@ -98,7 +98,7 @@ properties:
   ports:
     type: object
     description:
-      Ports as described in Documentation/devictree/bindings/graph.txt
+      Ports as described in Documentation/devicetree/bindings/graph.txt
     properties:
       "#address-cells":
         const: 1
@@ -154,7 +154,7 @@ examples:
     #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
-    dss: dss@04a00000 {
+    dss: dss@4a00000 {
             compatible = "ti,j721e-dss";
             reg =   <0x00 0x04a00000 0x00 0x10000>, /* common_m */
                     <0x00 0x04a10000 0x00 0x10000>, /* common_s0*/

Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml

@@ -56,7 +56,7 @@ properties:
   port:
     type: object
     description:
-      Port as described in Documentation/devictree/bindings/graph.txt.
+      Port as described in Documentation/devicetree/bindings/graph.txt.
       The DSS DPI output port node
 
   max-memory-bandwidth:
@@ -81,7 +81,7 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interrupt-controller/irq.h>
 
-    dss: dss@02540000 {
+    dss: dss@2540000 {
             compatible = "ti,k2g-dss";
             reg =   <0x02540000 0x400>,
                     <0x02550000 0x1000>,

drivers/dma-buf/Kconfig

@@ -43,11 +43,12 @@ config DMABUF_MOVE_NOTIFY
 	bool "Move notify between drivers (EXPERIMENTAL)"
 	default n
 	help
-	  Don''t pin buffers if the dynamic DMA-buf interface is available on both the
-	  exporter as well as the importer. This fixes a security problem where
-	  userspace is able to pin unrestricted amounts of memory through DMA-buf.
-	  But marked experimental because we don''t jet have a consistent execution
-	  context and memory management between drivers.
+	  Don't pin buffers if the dynamic DMA-buf interface is available on
+	  both the exporter as well as the importer. This fixes a security
+	  problem where userspace is able to pin unrestricted amounts of memory
+	  through DMA-buf.
+	  This is marked experimental because we don't yet have a consistent
+	  execution context and memory management between drivers.
 
 config DMABUF_SELFTESTS
 	tristate "Selftests for the dma-buf interfaces"

drivers/gpu/drm/drm_mm.c

@@ -45,7 +45,6 @@
 #include <linux/export.h>
 #include <linux/interval_tree_generic.h>
 #include <linux/seq_file.h>
-#include <linux/sched/signal.h>
 #include <linux/slab.h>
 #include <linux/stacktrace.h>
 
@@ -367,11 +366,6 @@ next_hole(struct drm_mm *mm,
 	  struct drm_mm_node *node,
 	  enum drm_mm_insert_mode mode)
 {
-	/* Searching is slow; check if we ran out of time/patience */
-	cond_resched();
-	if (fatal_signal_pending(current))
-		return NULL;
-
 	switch (mode) {
 	default:
 	case DRM_MM_INSERT_BEST:
@@ -563,7 +557,7 @@ int drm_mm_insert_node_in_range(struct drm_mm * const mm,
 		return 0;
 	}
 
-	return signal_pending(current) ? -ERESTARTSYS : -ENOSPC;
+	return -ENOSPC;
 }
 EXPORT_SYMBOL(drm_mm_insert_node_in_range);
 

drivers/gpu/drm/panel/panel-simple.c

@@ -361,7 +361,6 @@ static int panel_dpi_probe(struct device *dev,
 	struct panel_desc *desc;
 	unsigned int bus_flags;
 	struct videomode vm;
-	const char *mapping;
 	int ret;
 
 	np = dev->of_node;
@@ -386,16 +385,6 @@ static int panel_dpi_probe(struct device *dev,
 	of_property_read_u32(np, "width-mm", &desc->size.width);
 	of_property_read_u32(np, "height-mm", &desc->size.height);
 
-	of_property_read_string(np, "data-mapping", &mapping);
-	if (!strcmp(mapping, "rgb24"))
-		desc->bus_format = MEDIA_BUS_FMT_RGB888_1X24;
-	else if (!strcmp(mapping, "rgb565"))
-		desc->bus_format = MEDIA_BUS_FMT_RGB565_1X16;
-	else if (!strcmp(mapping, "bgr666"))
-		desc->bus_format = MEDIA_BUS_FMT_RGB666_1X18;
-	else if (!strcmp(mapping, "lvds666"))
-		desc->bus_format = MEDIA_BUS_FMT_RGB666_1X24_CPADHI;
-
 	/* Extract bus_flags from display_timing */
 	bus_flags = 0;
 	vm.flags = timing->flags;

drivers/gpu/drm/vboxvideo/vbox_drv.c

@@ -41,6 +41,10 @@ static int vbox_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (!vbox_check_supported(VBE_DISPI_ID_HGSMI))
 		return -ENODEV;
 
+	ret = drm_fb_helper_remove_conflicting_pci_framebuffers(pdev, "vboxvideodrmfb");
+	if (ret)
+		return ret;
+
 	vbox = kzalloc(sizeof(*vbox), GFP_KERNEL);
 	if (!vbox)
 		return -ENOMEM;

drivers/gpu/drm/vc4/vc4_hdmi.c

@@ -681,11 +681,23 @@ static enum drm_mode_status
 vc4_hdmi_encoder_mode_valid(struct drm_encoder *crtc,
 			    const struct drm_display_mode *mode)
 {
-	/* HSM clock must be 108% of the pixel clock.  Additionally,
-	 * the AXI clock needs to be at least 25% of pixel clock, but
-	 * HSM ends up being the limiting factor.
+	/*
+	 * As stated in RPi's vc4 firmware "HDMI state machine (HSM) clock must
+	 * be faster than pixel clock, infinitesimally faster, tested in
+	 * simulation. Otherwise, exact value is unimportant for HDMI
+	 * operation." This conflicts with bcm2835's vc4 documentation, which
+	 * states HSM's clock has to be at least 108% of the pixel clock.
+	 *
+	 * Real life tests reveal that vc4's firmware statement holds up, and
+	 * users are able to use pixel clocks closer to HSM's, namely for
+	 * 1920x1200@60Hz. So it was decided to have leave a 1% margin between
+	 * both clocks. Which, for RPi0-3 implies a maximum pixel clock of
+	 * 162MHz.
+	 *
+	 * Additionally, the AXI clock needs to be at least 25% of
+	 * pixel clock, but HSM ends up being the limiting factor.
 	 */
-	if (mode->clock > HSM_CLOCK_FREQ / (1000 * 108 / 100))
+	if (mode->clock > HSM_CLOCK_FREQ / (1000 * 101 / 100))
 		return MODE_CLOCK_HIGH;
 
 	return MODE_OK;

drivers/gpu/drm/xen/xen_drm_front.c

@@ -401,7 +401,7 @@ static int xen_drm_drv_dumb_create(struct drm_file *filp,
 
 	obj = xen_drm_front_gem_create(dev, args->size);
 	if (IS_ERR_OR_NULL(obj)) {
-		ret = PTR_ERR(obj);
+		ret = PTR_ERR_OR_ZERO(obj);
 		goto fail;
 	}
 

drivers/video/fbdev/core/fbcon.c

@@ -1282,6 +1282,9 @@ static void fbcon_deinit(struct vc_data *vc)
 	if (!con_is_bound(&fb_con))
 		fbcon_exit();
 
+	if (vc->vc_num == logo_shown)
+		logo_shown = FBCON_LOGO_CANSHOW;
+
 	return;
 }