Commit 3223d007 authored by Yuan Jiangli's avatar Yuan Jiangli Committed by Tony Lindgren

ARM: OMAP3+: PM: VP: fix integer truncation error

commit 2f34ce81
(OMAP3: PM: Adding voltage driver support.)
introduced runtime computation of waittime to handle all potential
sys clocks available.

In the voltage processor, the SPMSUpdateWait is calculated based on
the slew rate and the voltage step (SMPSUpdateWait = slew rate *
Voltage Step). After the voltage processor receives the SMPS_Ack
signal, the Voltage Controller will wait for SMPSUpdateWait clock
cycles for the voltage to settle to the new value. For all
practical purposes, the waittime parameter is the OMAP hardware
translation of what the slew rate on the PMIC is.

As an example, with TPS62361 on OMAP4460,
step_size = 10000
slew_rate = 32000
sys_clk_rate = 38400

Our current computation results in the following:
 = ((step_size / slew_rate) * sys_clk_rate) / 1000
 = ((10000 / 32000) * 38400 / 1000
 = 0

Fix the same using DIV_ROUND_UP as an extra wait clock cycle
is better than lesser clock cycle. For the above example, this
translates to:
 = (10000 * 38400) / (1000 * 32000)
 = 12
Acked-by: default avatarJon Hunter <jon-hunter@ti.com>
[nm@ti.com: slightly better implementation]
Signed-off-by: default avatarNishanth Menon <nm@ti.com>
Signed-off-by: default avatarYuan Jiangli <jlyuan@motorola.com>
Acked-by: default avatarKevin Hilman <khilman@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent bb1dbe7c
...@@ -61,8 +61,8 @@ void __init omap_vp_init(struct voltagedomain *voltdm) ...@@ -61,8 +61,8 @@ void __init omap_vp_init(struct voltagedomain *voltdm)
vddmin = voltdm->pmic->vp_vddmin; vddmin = voltdm->pmic->vp_vddmin;
vddmax = voltdm->pmic->vp_vddmax; vddmax = voltdm->pmic->vp_vddmax;
waittime = ((voltdm->pmic->step_size / voltdm->pmic->slew_rate) * waittime = DIV_ROUND_UP(voltdm->pmic->step_size * sys_clk_rate,
sys_clk_rate) / 1000; 1000 * voltdm->pmic->slew_rate);
vstepmin = voltdm->pmic->vp_vstepmin; vstepmin = voltdm->pmic->vp_vstepmin;
vstepmax = voltdm->pmic->vp_vstepmax; vstepmax = voltdm->pmic->vp_vstepmax;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment