Skip to content

L
linux
Commit 3240cab3 authored by Johannes Berg's avatar Johannes Berg Committed by John W. Linville
Browse files
Options

iwlagn: clean up some 3945/4965 remnants 

When the driver was split, a bunch of definitions
for the 3945 and 4965 devices stayed around, but
they're now useless so remove (some of) them.
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
Signed-off-by: default avatarWey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 68e022df
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 63 additions and 994 deletions
drivers/net/wireless/iwlwifi/iwl-agn-rs.h
View file @ 3240cab3
......@@ -41,20 +41,6 @@ struct iwl_rate_info {
u8 next_rs_tgg; /* next rate used in TGG rs algo */
};
struct iwl3945_rate_info {
u8 plcp; /* uCode API: IWL_RATE_6M_PLCP, etc. */
u8 ieee; /* MAC header: IWL_RATE_6M_IEEE, etc. */
u8 prev_ieee; /* previous rate in IEEE speeds */
u8 next_ieee; /* next rate in IEEE speeds */
u8 prev_rs; /* previous rate used in rs algo */
u8 next_rs; /* next rate used in rs algo */
u8 prev_rs_tgg; /* previous rate used in TGG rs algo */
u8 next_rs_tgg; /* next rate used in TGG rs algo */
u8 table_rs_index; /* index in rate scale table cmd */
u8 prev_table_rs; /* prev in rate table cmd */
};
/*
* These serve as indexes into
* struct iwl_rate_info iwl_rates[IWL_RATE_COUNT];
......@@ -75,7 +61,6 @@ enum {
IWL_RATE_60M_INDEX,
IWL_RATE_COUNT, /*FIXME:RS:change to IWL_RATE_INDEX_COUNT,*/
IWL_RATE_COUNT_LEGACY = IWL_RATE_COUNT - 1, /* Excluding 60M */
IWL_RATE_COUNT_3945 = IWL_RATE_COUNT - 1,
IWL_RATE_INVM_INDEX = IWL_RATE_COUNT,
IWL_RATE_INVALID = IWL_RATE_COUNT,
};
......@@ -213,7 +198,6 @@ enum {
IWL_CCK_BASIC_RATES_MASK)
#define IWL_RATES_MASK ((1 << IWL_RATE_COUNT) - 1)
#define IWL_RATES_MASK_3945 ((1 << IWL_RATE_COUNT_3945) - 1)
#define IWL_INVALID_VALUE -1
......@@ -453,19 +437,9 @@ static inline u8 first_antenna(u8 mask)
}
/**
* iwl3945_rate_scale_init - Initialize the rate scale table based on assoc info
*
* The specific throughput table used is based on the type of network
* the associated with, including A, B, G, and G w/ TGG protection
*/
extern void iwl3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id);
/* Initialize station's rate scaling information after adding station */
extern void iwl_rs_rate_init(struct iwl_priv *priv,
struct ieee80211_sta *sta, u8 sta_id);
extern void iwl3945_rs_rate_init(struct iwl_priv *priv,
struct ieee80211_sta *sta, u8 sta_id);
/**
* iwl_rate_control_register - Register the rate control algorithm callbacks
......@@ -478,7 +452,6 @@ extern void iwl3945_rs_rate_init(struct iwl_priv *priv,
*
*/
extern int iwlagn_rate_control_register(void);
extern int iwl3945_rate_control_register(void);
/**
* iwl_rate_control_unregister - Unregister the rate control callbacks
......@@ -487,6 +460,5 @@ extern int iwl3945_rate_control_register(void);
* the driver is unloaded.
*/
extern void iwlagn_rate_control_unregister(void);
extern void iwl3945_rate_control_unregister(void);
#endif /* __iwl_agn__rs__ */
drivers/net/wireless/iwlwifi/iwl-agn-sta.c
View file @ 3240cab3
......@@ -474,7 +474,7 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv,
memset(&priv->stations[sta_id].keyinfo, 0,
sizeof(struct iwl_hw_key));
memset(&priv->stations[sta_id].sta.key, 0,
sizeof(struct iwl4965_keyinfo));
sizeof(struct iwl_keyinfo));
priv->stations[sta_id].sta.key.key_flags =
STA_KEY_FLG_NO_ENC | STA_KEY_FLG_INVALID;
priv->stations[sta_id].sta.key.key_offset = WEP_INVALID_OFFSET;
......
drivers/net/wireless/iwlwifi/iwl-agn.h
View file @ 3240cab3
......@@ -66,7 +66,6 @@
#include "iwl-dev.h"
/* configuration for the _agn devices */
extern struct iwl_cfg iwl4965_agn_cfg;
extern struct iwl_cfg iwl5300_agn_cfg;
extern struct iwl_cfg iwl5100_agn_cfg;
extern struct iwl_cfg iwl5350_agn_cfg;
......@@ -114,7 +113,6 @@ extern struct iwl_hcmd_ops iwlagn_bt_hcmd;
extern struct iwl_hcmd_utils_ops iwlagn_hcmd_utils;
extern struct ieee80211_ops iwlagn_hw_ops;
extern struct ieee80211_ops iwl4965_hw_ops;
int iwl_reset_ict(struct iwl_priv *priv);
void iwl_disable_ict(struct iwl_priv *priv);
......
drivers/net/wireless/iwlwifi/iwl-commands.h
View file @ 3240cab3
This diff is collapsed.
drivers/net/wireless/iwlwifi/iwl-core.c
View file @ 3240cab3
......@@ -1430,7 +1430,6 @@ void iwl_mac_remove_interface(struct ieee80211_hw *hw,
iwl_teardown_interface(priv, vif, false);
memset(priv->bssid, 0, ETH_ALEN);
mutex_unlock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "leave\n");
......
drivers/net/wireless/iwlwifi/iwl-dev.h
View file @ 3240cab3
......@@ -26,7 +26,6 @@
/*
* Please use this file (iwl-dev.h) for driver implementation definitions.
* Please use iwl-commands.h for uCode API definitions.
* Please use iwl-4965-hw.h for hardware-related definitions.
*/
#ifndef __iwl_dev_h__
......@@ -179,53 +178,12 @@ struct iwl_tx_queue {
#define IWL_NUM_SCAN_RATES (2)
struct iwl4965_channel_tgd_info {
u8 type;
s8 max_power;
};
struct iwl4965_channel_tgh_info {
s64 last_radar_time;
};
#define IWL4965_MAX_RATE (33)
struct iwl3945_clip_group {
/* maximum power level to prevent clipping for each rate, derived by
* us from this band's saturation power in EEPROM */
const s8 clip_powers[IWL_MAX_RATES];
};
/* current Tx power values to use, one for each rate for each channel.
* requested power is limited by:
* -- regulatory EEPROM limits for this channel
* -- hardware capabilities (clip-powers)
* -- spectrum management
* -- user preference (e.g. iwconfig)
* when requested power is set, base power index must also be set. */
struct iwl3945_channel_power_info {
struct iwl3945_tx_power tpc; /* actual radio and DSP gain settings */
s8 power_table_index; /* actual (compenst'd) index into gain table */
s8 base_power_index; /* gain index for power at factory temp. */
s8 requested_power; /* power (dBm) requested for this chnl/rate */
};
/* current scan Tx power values to use, one for each scan rate for each
* channel. */
struct iwl3945_scan_power_info {
struct iwl3945_tx_power tpc; /* actual radio and DSP gain settings */
s8 power_table_index; /* actual (compenst'd) index into gain table */
s8 requested_power; /* scan pwr (dBm) requested for chnl/rate */
};
/*
* One for each channel, holds all channel setup data
* Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
* with one another!
*/
struct iwl_channel_info {
struct iwl4965_channel_tgd_info tgd;
struct iwl4965_channel_tgh_info tgh;
struct iwl_eeprom_channel eeprom; /* EEPROM regulatory limit */
struct iwl_eeprom_channel ht40_eeprom; /* EEPROM regulatory limit for
* HT40 channel */
......@@ -245,14 +203,6 @@ struct iwl_channel_info {
s8 ht40_max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
u8 ht40_flags; /* flags copied from EEPROM */
u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */
/* Radio/DSP gain settings for each "normal" data Tx rate.
* These include, in addition to RF and DSP gain, a few fields for
* remembering/modifying gain settings (indexes). */
struct iwl3945_channel_power_info power_info[IWL4965_MAX_RATE];
/* Radio/DSP gain settings for each scan rate, for directed scans. */
struct iwl3945_scan_power_info scan_pwr_info[IWL_NUM_SCAN_RATES];
};
#define IWL_TX_FIFO_BK 0 /* shared */
......@@ -501,9 +451,6 @@ struct iwl_station_priv_common {
* When mac80211 creates a station it reserves some space (hw->sta_data_size)
* in the structure for use by driver. This structure is places in that
* space.
*
* The common struct MUST be first because it is shared between
* 3945 and agn!
*/
struct iwl_station_priv {
struct iwl_station_priv_common common;
......@@ -621,14 +568,6 @@ struct iwl_tlv_ucode_header {
u8 data[0];
};
struct iwl4965_ibss_seq {
u8 mac[ETH_ALEN];
u16 seq_num;
u16 frag_num;
unsigned long packet_time;
struct list_head list;
};
struct iwl_sensitivity_ranges {
u16 min_nrg_cck;
u16 max_nrg_cck;
......@@ -724,8 +663,6 @@ struct iwl_hw_params {
* Naming convention --
* iwl_ <-- Is part of iwlwifi
* iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX)
* iwl4965_bg_ <-- Called from work queue context
* iwl4965_mac_ <-- mac80211 callback
*
****************************************************************************/
extern void iwl_update_chain_flags(struct iwl_priv *priv);
......@@ -774,7 +711,6 @@ struct iwl_dma_ptr {
/* Sensitivity and chain noise calibration */
#define INITIALIZATION_VALUE 0xFFFF
#define IWL4965_CAL_NUM_BEACONS 20
#define IWL_CAL_NUM_BEACONS 16
#define MAXIMUM_ALLOWED_PATHLOSS 15
......@@ -808,24 +744,19 @@ struct iwl_dma_ptr {
#define NRG_NUM_PREV_STAT_L 20
#define NUM_RX_CHAINS 3
enum iwl4965_false_alarm_state {
enum iwlagn_false_alarm_state {
IWL_FA_TOO_MANY = 0,
IWL_FA_TOO_FEW = 1,
IWL_FA_GOOD_RANGE = 2,
};
enum iwl4965_chain_noise_state {
enum iwlagn_chain_noise_state {
IWL_CHAIN_NOISE_ALIVE = 0, /* must be 0 */
IWL_CHAIN_NOISE_ACCUMULATE,
IWL_CHAIN_NOISE_CALIBRATED,
IWL_CHAIN_NOISE_DONE,
};
enum iwl4965_calib_enabled_state {
IWL_CALIB_DISABLED = 0, /* must be 0 */
IWL_CALIB_ENABLED = 1,
};
/*
* enum iwl_calib
......@@ -1132,12 +1063,6 @@ struct iwl_force_reset {
};
/* extend beacon time format bit shifting */
/*
* for _3945 devices
* bits 31:24 - extended
* bits 23:0 - interval
*/
#define IWL3945_EXT_BEACON_TIME_POS 24
/*
* for _agn devices
* bits 31:22 - extended
......@@ -1391,15 +1316,12 @@ struct iwl_priv {
struct iwl_power_mgr power_data;
struct iwl_tt_mgmt thermal_throttle;
/* context information */
u8 bssid[ETH_ALEN]; /* used only on 3945 but filled by core */
/* station table variables */
/* Note: if lock and sta_lock are needed, lock must be acquired first */
spinlock_t sta_lock;
int num_stations;
struct iwl_station_entry stations[IWL_STATION_COUNT];
struct iwl_station_entry stations[IWLAGN_STATION_COUNT];
unsigned long ucode_key_table;
/* queue refcounts */
......@@ -1423,101 +1345,66 @@ struct iwl_priv {
/* Last Rx'd beacon timestamp */
u64 timestamp;
union {
#if defined(CONFIG_IWL3945) || defined(CONFIG_IWL3945_MODULE)
struct {
void *shared_virt;
dma_addr_t shared_phys;
struct delayed_work thermal_periodic;
struct delayed_work rfkill_poll;
struct iwl3945_notif_statistics statistics;
#ifdef CONFIG_IWLWIFI_DEBUGFS
struct iwl3945_notif_statistics accum_statistics;
struct iwl3945_notif_statistics delta_statistics;
struct iwl3945_notif_statistics max_delta;
#endif
u32 sta_supp_rates;
int last_rx_rssi; /* From Rx packet statistics */
/* Rx'd packet timing information */
u32 last_beacon_time;
u64 last_tsf;
/*
* each calibration channel group in the
* EEPROM has a derived clip setting for
* each rate.
*/
const struct iwl3945_clip_group clip_groups[5];
} _3945;
#endif
#if defined(CONFIG_IWLAGN) || defined(CONFIG_IWLAGN_MODULE)
struct {
/* INT ICT Table */
__le32 *ict_tbl;
void *ict_tbl_vir;
dma_addr_t ict_tbl_dma;
dma_addr_t aligned_ict_tbl_dma;
int ict_index;
u32 inta;
bool use_ict;
/*
* reporting the number of tids has AGG on. 0 means
* no AGGREGATION
*/
u8 agg_tids_count;
struct iwl_rx_phy_res last_phy_res;
bool last_phy_res_valid;
struct completion firmware_loading_complete;
u32 init_evtlog_ptr, init_evtlog_size, init_errlog_ptr;
u32 inst_evtlog_ptr, inst_evtlog_size, inst_errlog_ptr;
/*
* chain noise reset and gain commands are the
* two extra calibration commands follows the standard
* phy calibration commands
*/
u8 phy_calib_chain_noise_reset_cmd;
u8 phy_calib_chain_noise_gain_cmd;
struct iwl_notif_statistics statistics;
struct iwl_bt_notif_statistics statistics_bt;
/* counts reply_tx error */
struct reply_tx_error_statistics reply_tx_stats;
struct reply_agg_tx_error_statistics reply_agg_tx_stats;
struct {
/* INT ICT Table */
__le32 *ict_tbl;
void *ict_tbl_vir;
dma_addr_t ict_tbl_dma;
dma_addr_t aligned_ict_tbl_dma;
int ict_index;
u32 inta;
bool use_ict;
/*
* reporting the number of tids has AGG on. 0 means
* no AGGREGATION
*/
u8 agg_tids_count;
struct iwl_rx_phy_res last_phy_res;
bool last_phy_res_valid;
struct completion firmware_loading_complete;
u32 init_evtlog_ptr, init_evtlog_size, init_errlog_ptr;
u32 inst_evtlog_ptr, inst_evtlog_size, inst_errlog_ptr;
/*
* chain noise reset and gain commands are the
* two extra calibration commands follows the standard
* phy calibration commands
*/
u8 phy_calib_chain_noise_reset_cmd;
u8 phy_calib_chain_noise_gain_cmd;
struct iwl_notif_statistics statistics;
struct iwl_bt_notif_statistics statistics_bt;
/* counts reply_tx error */
struct reply_tx_error_statistics reply_tx_stats;
struct reply_agg_tx_error_statistics reply_agg_tx_stats;
#ifdef CONFIG_IWLWIFI_DEBUGFS
struct iwl_notif_statistics accum_statistics;
struct iwl_notif_statistics delta_statistics;
struct iwl_notif_statistics max_delta;
struct iwl_bt_notif_statistics accum_statistics_bt;
struct iwl_bt_notif_statistics delta_statistics_bt;
struct iwl_bt_notif_statistics max_delta_bt;
#endif
/* notification wait support */
struct list_head notif_waits;
spinlock_t notif_wait_lock;
wait_queue_head_t notif_waitq;
/* remain-on-channel offload support */
struct ieee80211_channel *hw_roc_channel;
struct delayed_work hw_roc_work;
enum nl80211_channel_type hw_roc_chantype;
int hw_roc_duration;
struct sk_buff *offchan_tx_skb;
int offchan_tx_timeout;
struct ieee80211_channel *offchan_tx_chan;
} _agn;
struct iwl_notif_statistics accum_statistics;
struct iwl_notif_statistics delta_statistics;
struct iwl_notif_statistics max_delta;
struct iwl_bt_notif_statistics accum_statistics_bt;
struct iwl_bt_notif_statistics delta_statistics_bt;
struct iwl_bt_notif_statistics max_delta_bt;
#endif
};
/* notification wait support */
struct list_head notif_waits;
spinlock_t notif_wait_lock;
wait_queue_head_t notif_waitq;
/* remain-on-channel offload support */
struct ieee80211_channel *hw_roc_channel;
struct delayed_work hw_roc_work;
enum nl80211_channel_type hw_roc_chantype;
int hw_roc_duration;
bool hw_roc_setup;
struct sk_buff *offchan_tx_skb;
int offchan_tx_timeout;
struct ieee80211_channel *offchan_tx_chan;
} _agn;
/* bt coex */
u8 bt_enable_flag;
......
drivers/net/wireless/iwlwifi/iwl-eeprom.h
View file @ 3240cab3
......@@ -110,10 +110,6 @@ enum {
};
/* SKU Capabilities */
/* 3945 only */
#define EEPROM_SKU_CAP_SW_RF_KILL_ENABLE (1 << 0)
#define EEPROM_SKU_CAP_HW_RF_KILL_ENABLE (1 << 1)
/* 5000 and up */
#define EEPROM_SKU_CAP_BAND_POS (4)
#define EEPROM_SKU_CAP_BAND_SELECTION \
......@@ -168,28 +164,6 @@ struct iwl_eeprom_enhanced_txpwr {
s8 mimo3_max;
} __packed;
/* 3945 Specific */
#define EEPROM_3945_EEPROM_VERSION (0x2f)
/* 4965 has two radio transmitters (and 3 radio receivers) */
#define EEPROM_TX_POWER_TX_CHAINS (2)
/* 4965 has room for up to 8 sets of txpower calibration data */
#define EEPROM_TX_POWER_BANDS (8)
/* 4965 factory calibration measures txpower gain settings for
* each of 3 target output levels */
#define EEPROM_TX_POWER_MEASUREMENTS (3)
/* 4965 Specific */
/* 4965 driver does not work with txpower calibration version < 5 */
#define EEPROM_4965_TX_POWER_VERSION (5)
#define EEPROM_4965_EEPROM_VERSION (0x2f)
#define EEPROM_4965_CALIB_VERSION_OFFSET (2*0xB6) /* 2 bytes */
#define EEPROM_4965_CALIB_TXPOWER_OFFSET (2*0xE8) /* 48 bytes */
#define EEPROM_4965_BOARD_REVISION (2*0x4F) /* 2 bytes */
#define EEPROM_4965_BOARD_PBA (2*0x56+1) /* 9 bytes */
/* 5000 Specific */
#define EEPROM_5000_TX_POWER_VERSION (4)
#define EEPROM_5000_EEPROM_VERSION (0x11A)
......@@ -282,90 +256,6 @@ struct iwl_eeprom_enhanced_txpwr {
/* 2.4 GHz */
extern const u8 iwl_eeprom_band_1[14];
/*
* factory calibration data for one txpower level, on one channel,
* measured on one of the 2 tx chains (radio transmitter and associated
* antenna). EEPROM contains:
*
* 1) Temperature (degrees Celsius) of device when measurement was made.
*
* 2) Gain table index used to achieve the target measurement power.
* This refers to the "well-known" gain tables (see iwl-4965-hw.h).
*
* 3) Actual measured output power, in half-dBm ("34" = 17 dBm).
*
* 4) RF power amplifier detector level measurement (not used).
*/
struct iwl_eeprom_calib_measure {
u8 temperature; /* Device temperature (Celsius) */
u8 gain_idx; /* Index into gain table */
u8 actual_pow; /* Measured RF output power, half-dBm */
s8 pa_det; /* Power amp detector level (not used) */
} __packed;
/*
* measurement set for one channel. EEPROM contains:
*
* 1) Channel number measured
*
* 2) Measurements for each of 3 power levels for each of 2 radio transmitters
* (a.k.a. "tx chains") (6 measurements altogether)
*/
struct iwl_eeprom_calib_ch_info {
u8 ch_num;
struct iwl_eeprom_calib_measure
measurements[EEPROM_TX_POWER_TX_CHAINS]
[EEPROM_TX_POWER_MEASUREMENTS];
} __packed;
/*
* txpower subband info.
*
* For each frequency subband, EEPROM contains the following:
*
* 1) First and last channels within range of the subband. "0" values
* indicate that this sample set is not being used.
*
* 2) Sample measurement sets for 2 channels close to the range endpoints.
*/
struct iwl_eeprom_calib_subband_info {
u8 ch_from; /* channel number of lowest channel in subband */
u8 ch_to; /* channel number of highest channel in subband */
struct iwl_eeprom_calib_ch_info ch1;
struct iwl_eeprom_calib_ch_info ch2;
} __packed;
/*
* txpower calibration info. EEPROM contains:
*
* 1) Factory-measured saturation power levels (maximum levels at which
* tx power amplifier can output a signal without too much distortion).
* There is one level for 2.4 GHz band and one for 5 GHz band. These
* values apply to all channels within each of the bands.
*
* 2) Factory-measured power supply voltage level. This is assumed to be
* constant (i.e. same value applies to all channels/bands) while the
* factory measurements are being made.
*
* 3) Up to 8 sets of factory-measured txpower calibration values.
* These are for different frequency ranges, since txpower gain
* characteristics of the analog radio circuitry vary with frequency.
*
* Not all sets need to be filled with data;
* struct iwl_eeprom_calib_subband_info contains range of channels
* (0 if unused) for each set of data.
*/
struct iwl_eeprom_calib_info {
u8 saturation_power24; /* half-dBm (e.g. "34" = 17 dBm) */
u8 saturation_power52; /* half-dBm */
__le16 voltage; /* signed */
struct iwl_eeprom_calib_subband_info
band_info[EEPROM_TX_POWER_BANDS];
} __packed;
#define ADDRESS_MSK 0x0000FFFF
#define INDIRECT_TYPE_MSK 0x000F0000
#define INDIRECT_HOST 0x00010000
......@@ -398,83 +288,8 @@ struct iwl_eeprom_calib_info {
#define EEPROM_RF_CFG_TX_ANT_MSK(x) ((x >> 8) & 0xF) /* bits 8-11 */
#define EEPROM_RF_CFG_RX_ANT_MSK(x) ((x >> 12) & 0xF) /* bits 12-15 */
#define EEPROM_3945_RF_CFG_TYPE_MAX 0x0
#define EEPROM_4965_RF_CFG_TYPE_MAX 0x1
/* Radio Config for 5000 and up */
#define EEPROM_RF_CONFIG_TYPE_R3x3 0x0
#define EEPROM_RF_CONFIG_TYPE_R2x2 0x1
#define EEPROM_RF_CONFIG_TYPE_R1x2 0x2
#define EEPROM_RF_CONFIG_TYPE_MAX 0x3
/*
* Per-channel regulatory data.
*
* Each channel that *might* be supported by iwl has a fixed location
* in EEPROM containing EEPROM_CHANNEL_* usage flags (LSB) and max regulatory
* txpower (MSB).
*
* Entries immediately below are for 20 MHz channel width. HT40 (40 MHz)
* channels (only for 4965, not supported by 3945) appear later in the EEPROM.
*
* 2.4 GHz channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
*/
#define EEPROM_REGULATORY_SKU_ID (2*0x60) /* 4 bytes */
#define EEPROM_REGULATORY_BAND_1 (2*0x62) /* 2 bytes */
#define EEPROM_REGULATORY_BAND_1_CHANNELS (2*0x63) /* 28 bytes */
/*
* 4.9 GHz channels 183, 184, 185, 187, 188, 189, 192, 196,
* 5.0 GHz channels 7, 8, 11, 12, 16
* (4915-5080MHz) (none of these is ever supported)
*/
#define EEPROM_REGULATORY_BAND_2 (2*0x71) /* 2 bytes */
#define EEPROM_REGULATORY_BAND_2_CHANNELS (2*0x72) /* 26 bytes */
/*
* 5.2 GHz channels 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
* (5170-5320MHz)
*/
#define EEPROM_REGULATORY_BAND_3 (2*0x7F) /* 2 bytes */
#define EEPROM_REGULATORY_BAND_3_CHANNELS (2*0x80) /* 24 bytes */
/*
* 5.5 GHz channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
* (5500-5700MHz)
*/
#define EEPROM_REGULATORY_BAND_4 (2*0x8C) /* 2 bytes */
#define EEPROM_REGULATORY_BAND_4_CHANNELS (2*0x8D) /* 22 bytes */
/*
* 5.7 GHz channels 145, 149, 153, 157, 161, 165
* (5725-5825MHz)
*/
#define EEPROM_REGULATORY_BAND_5 (2*0x98) /* 2 bytes */
#define EEPROM_REGULATORY_BAND_5_CHANNELS (2*0x99) /* 12 bytes */
/*
* 2.4 GHz HT40 channels 1 (5), 2 (6), 3 (7), 4 (8), 5 (9), 6 (10), 7 (11)
*
* The channel listed is the center of the lower 20 MHz half of the channel.
* The overall center frequency is actually 2 channels (10 MHz) above that,
* and the upper half of each HT40 channel is centered 4 channels (20 MHz) away
* from the lower half; e.g. the upper half of HT40 channel 1 is channel 5,
* and the overall HT40 channel width centers on channel 3.
*
* NOTE: The RXON command uses 20 MHz channel numbers to specify the
* control channel to which to tune. RXON also specifies whether the
* control channel is the upper or lower half of a HT40 channel.
*
* NOTE: 4965 does not support HT40 channels on 2.4 GHz.
*/
#define EEPROM_4965_REGULATORY_BAND_24_HT40_CHANNELS (2*0xA0) /* 14 bytes */
/*
* 5.2 GHz HT40 channels 36 (40), 44 (48), 52 (56), 60 (64),
* 100 (104), 108 (112), 116 (120), 124 (128), 132 (136), 149 (153), 157 (161)
*/
#define EEPROM_4965_REGULATORY_BAND_52_HT40_CHANNELS (2*0xA8) /* 22 bytes */
#define EEPROM_REGULATORY_BAND_NO_HT40 (0)
struct iwl_eeprom_ops {
......
drivers/net/wireless/iwlwifi/iwl-hcmd.c
View file @ 3240cab3
......@@ -51,9 +51,7 @@ const char *get_cmd_string(u8 cmd)
IWL_CMD(REPLY_REMOVE_ALL_STA);
IWL_CMD(REPLY_TXFIFO_FLUSH);
IWL_CMD(REPLY_WEPKEY);
IWL_CMD(REPLY_3945_RX);
IWL_CMD(REPLY_TX);
IWL_CMD(REPLY_RATE_SCALE);
IWL_CMD(REPLY_LEDS_CMD);
IWL_CMD(REPLY_TX_LINK_QUALITY_CMD);
IWL_CMD(COEX_PRIORITY_TABLE_CMD);
......
drivers/net/wireless/iwlwifi/iwl-prph.h
View file @ 3240cab3
......@@ -91,7 +91,6 @@
#define APMG_PS_CTRL_VAL_RESET_REQ (0x04000000)
#define APMG_PS_CTRL_MSK_PWR_SRC (0x03000000)
#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN (0x00000000)
#define APMG_PS_CTRL_VAL_PWR_SRC_MAX (0x01000000) /* 3945 only */
#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX (0x02000000)
#define APMG_SVR_VOLTAGE_CONFIG_BIT_MSK (0x000001E0) /* bit 8:5 */
#define APMG_SVR_DIGITAL_VOLTAGE_1_32 (0x00000060)
......@@ -234,16 +233,6 @@
#define BSM_SRAM_SIZE (1024) /* bytes */
/* 3945 Tx scheduler registers */
#define ALM_SCD_BASE (PRPH_BASE + 0x2E00)
#define ALM_SCD_MODE_REG (ALM_SCD_BASE + 0x000)
#define ALM_SCD_ARASTAT_REG (ALM_SCD_BASE + 0x004)
#define ALM_SCD_TXFACT_REG (ALM_SCD_BASE + 0x010)
#define ALM_SCD_TXF4MF_REG (ALM_SCD_BASE + 0x014)
#define ALM_SCD_TXF5MF_REG (ALM_SCD_BASE + 0x020)
#define ALM_SCD_SBYP_MODE_1_REG (ALM_SCD_BASE + 0x02C)
#define ALM_SCD_SBYP_MODE_2_REG (ALM_SCD_BASE + 0x030)
/**
* Tx Scheduler
*
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7