Merge branch 's5p-fixes-for-linus' of...

Merge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung

* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: Suspend: Fix dependency of ARCH_SUSPEND_POSSIBLE
  ARM: SAMSUNG: Fix CPU idmask
  ARM: EXYNOS4: Fix addruart macro
  ARM: EXYNOS4: Fix smsc9215 irq polarity on SMDKC210
  ARM: EXYNOS4: Fix smsc9215 irq polarity on SMDKV310
  ARM: EXYNOS4: Fix build warning on regarding SATA_AHCI_PLATFORM
  ARM: S5PV210: Remove duplicated inclusion
  ARM: S5PV210: Fix security engine interrupt names
  ARM: S5P64X0: Fix iodesc array size for S5P6450

arch/arm/Kconfig

@@ -2009,6 +2009,7 @@ menu "Power management options"
 source "kernel/power/Kconfig"
 
 config ARCH_SUSPEND_POSSIBLE
+	depends on !ARCH_S5P64X0 && !ARCH_S5P6442
 	def_bool y
 
 endmenu

arch/arm/mach-exynos4/Kconfig

@@ -20,6 +20,11 @@ config EXYNOS4_MCT
 	help
 	  Use MCT (Multi Core Timer) as kernel timers
 
+config EXYNOS4_DEV_AHCI
+	bool
+	help
+	  Compile in platform device definitions for AHCI
+
 config EXYNOS4_DEV_PD
 	bool
 	help
@@ -134,9 +139,9 @@ config MACH_ARMLEX4210
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
+	select EXYNOS4_DEV_AHCI
 	select EXYNOS4_DEV_SYSMMU
 	select EXYNOS4_SETUP_SDHCI
-	select SATA_AHCI_PLATFORM
 	help
 	  Machine support for Samsung ARMLEX4210 based on EXYNOS4210
 

arch/arm/mach-exynos4/Makefile

@@ -39,6 +39,7 @@ obj-$(CONFIG_MACH_NURI)			+= mach-nuri.o
 # device support
 
 obj-y					+= dev-audio.o
+obj-$(CONFIG_EXYNOS4_DEV_AHCI)		+= dev-ahci.o
 obj-$(CONFIG_EXYNOS4_DEV_PD)		+= dev-pd.o
 obj-$(CONFIG_EXYNOS4_DEV_SYSMMU)	+= dev-sysmmu.o
 
@@ -53,4 +54,3 @@ obj-$(CONFIG_EXYNOS4_SETUP_I2C7)	+= setup-i2c7.o
 obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD)	+= setup-keypad.o
 obj-$(CONFIG_EXYNOS4_SETUP_SDHCI)	+= setup-sdhci.o
 obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
-obj-$(CONFIG_SATA_AHCI_PLATFORM)	+= dev-ahci.o

arch/arm/mach-exynos4/include/mach/debug-macro.S

@@ -21,8 +21,8 @@
 	 */
 
 	.macro addruart, rp, rv
-		ldreq	\rp, = S3C_PA_UART
-		ldrne	\rv, = S3C_VA_UART
+		ldr	\rp, = S3C_PA_UART
+		ldr	\rv, = S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
 		add	\rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART)
 		add	\rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART)

arch/arm/mach-exynos4/mach-smdkc210.c

@@ -125,7 +125,7 @@ static struct resource smdkc210_smsc911x_resources[] = {
 };
 
 static struct smsc911x_platform_config smsc9215_config = {
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
 	.flags		= SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
 	.phy_interface	= PHY_INTERFACE_MODE_MII,

arch/arm/mach-exynos4/mach-smdkv310.c

@@ -127,7 +127,7 @@ static struct resource smdkv310_smsc911x_resources[] = {
 };
 
 static struct smsc911x_platform_config smsc9215_config = {
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
 	.flags		= SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
 	.phy_interface	= PHY_INTERFACE_MODE_MII,

arch/arm/mach-s5p64x0/cpu.c

@@ -119,7 +119,7 @@ void __init s5p6450_map_io(void)
 	s3c_adc_setname("s3c64xx-adc");
 
 	iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
-	iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6440_iodesc));
+	iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
 }
 
 /*

arch/arm/mach-s5pv210/include/mach/irqs.h

@@ -99,9 +99,9 @@
 #define IRQ_TC			IRQ_PENDN
 #define IRQ_KEYPAD		S5P_IRQ_VIC2(25)
 #define IRQ_CG			S5P_IRQ_VIC2(26)
-#define IRQ_SEC			S5P_IRQ_VIC2(27)
-#define IRQ_SECRX		S5P_IRQ_VIC2(28)
-#define IRQ_SECTX		S5P_IRQ_VIC2(29)
+#define IRQ_SSS_INT		S5P_IRQ_VIC2(27)
+#define IRQ_SSS_HASH		S5P_IRQ_VIC2(28)
+#define IRQ_PCM2		S5P_IRQ_VIC2(29)
 #define IRQ_SDMIRQ		S5P_IRQ_VIC2(30)
 #define IRQ_SDMFIQ		S5P_IRQ_VIC2(31)
 

arch/arm/mach-s5pv210/mach-smdkv210.c

@@ -44,7 +44,6 @@
 #include <plat/keypad.h>
 #include <plat/pm.h>
 #include <plat/fb.h>
-#include <plat/gpio-cfg.h>
 #include <plat/s5p-time.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */

arch/arm/plat-s5p/cpu.c

@@ -39,7 +39,7 @@ static const char name_exynos4210[] = "EXYNOS4210";
 static struct cpu_table cpu_ids[] __initdata = {
 	{
 		.idcode		= 0x56440100,
-		.idmask		= 0xffffff00,
+		.idmask		= 0xfffff000,
 		.map_io		= s5p6440_map_io,
 		.init_clocks	= s5p6440_init_clocks,
 		.init_uarts	= s5p6440_init_uarts,
@@ -47,7 +47,7 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.name		= name_s5p6440,
 	}, {
 		.idcode		= 0x36442000,
-		.idmask		= 0xffffff00,
+		.idmask		= 0xfffff000,
 		.map_io		= s5p6442_map_io,
 		.init_clocks	= s5p6442_init_clocks,
 		.init_uarts	= s5p6442_init_uarts,
@@ -55,7 +55,7 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.name		= name_s5p6442,
 	}, {
 		.idcode		= 0x36450000,
-		.idmask		= 0xffffff00,
+		.idmask		= 0xfffff000,
 		.map_io		= s5p6450_map_io,
 		.init_clocks	= s5p6450_init_clocks,
 		.init_uarts	= s5p6450_init_uarts,
@@ -79,7 +79,7 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.name		= name_s5pv210,
 	}, {
 		.idcode		= 0x43210000,
-		.idmask		= 0xfffff000,
+		.idmask		= 0xfffe0000,
 		.map_io		= exynos4_map_io,
 		.init_clocks	= exynos4_init_clocks,
 		.init_uarts	= exynos4_init_uarts,

arch/arm/plat-samsung/init.c

@@ -36,7 +36,7 @@ static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode,
 						unsigned int count)
 {
 	for (; count != 0; count--, tab++) {
-		if ((idcode & tab->idmask) == tab->idcode)
+		if ((idcode & tab->idmask) == (tab->idcode & tab->idmask))
 			return tab;
 	}