ARM: mm: rename jump labels in v7_flush_dcache_all function

This patch renames jump labels in v7_flush_dcache_all in order to define
a specific flush cache levels entry point.
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>

arch/arm/mm/cache-v7.S

@@ -48,7 +48,7 @@ ENTRY(v7_flush_dcache_louis)
 	mov	r3, r3, lsr #20			@ r3 = LoUIS * 2
 	moveq	pc, lr				@ return if level == 0
 	mov	r10, #0				@ r10 (starting level) = 0
-	b	loop1				@ start flushing cache levels
+	b	flush_levels			@ start flushing cache levels
 ENDPROC(v7_flush_dcache_louis)
 
 /*
@@ -67,7 +67,7 @@ ENTRY(v7_flush_dcache_all)
 	mov	r3, r3, lsr #23			@ left align loc bit field
 	beq	finished			@ if loc is 0, then no need to clean
 	mov	r10, #0				@ start clean at cache level 0
-loop1:
+flush_levels:
 	add	r2, r10, r10, lsr #1		@ work out 3x current cache level
 	mov	r1, r0, lsr r2			@ extract cache type bits from clidr
 	and	r1, r1, #7			@ mask of the bits for current cache only
@@ -89,9 +89,9 @@ loop1:
 	clz	r5, r4				@ find bit position of way size increment
 	ldr	r7, =0x7fff
 	ands	r7, r7, r1, lsr #13		@ extract max number of the index size
-loop2:
+loop1:
 	mov	r9, r4				@ create working copy of max way size
-loop3:
+loop2:
  ARM(	orr	r11, r10, r9, lsl r5	)	@ factor way and cache number into r11
  THUMB(	lsl	r6, r9, r5		)
  THUMB(	orr	r11, r10, r6		)	@ factor way and cache number into r11
@@ -100,13 +100,13 @@ loop3:
  THUMB(	orr	r11, r11, r6		)	@ factor index number into r11
 	mcr	p15, 0, r11, c7, c14, 2		@ clean & invalidate by set/way
 	subs	r9, r9, #1			@ decrement the way
-	bge	loop3
-	subs	r7, r7, #1			@ decrement the index
 	bge	loop2
+	subs	r7, r7, #1			@ decrement the index
+	bge	loop1
 skip:
 	add	r10, r10, #2			@ increment cache number
 	cmp	r3, r10
-	bgt	loop1
+	bgt	flush_levels
 finished:
 	mov	r10, #0				@ swith back to cache level 0
 	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr