Commit 331419b2 authored by Stanislaw Gruszka's avatar Stanislaw Gruszka Committed by Felix Fietkau

mt76x0: remove mt76x0_burst_write_regs()

We don't need to use custom burst write regs via MCU, we can use
generic mt76_wr_copy() for the same purpose.
Signed-off-by: default avatarStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: default avatarLorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: default avatarFelix Fietkau <nbd@nbd.name>
parent fd0c6e18
......@@ -249,7 +249,7 @@ static void mt76x0_init_mac_registers(struct mt76x0_dev *dev)
static int mt76x0_init_wcid_mem(struct mt76x0_dev *dev)
{
u32 *vals;
int i, ret;
int i;
vals = kmalloc(sizeof(*vals) * MT76_N_WCIDS * 2, GFP_KERNEL);
if (!vals)
......@@ -260,25 +260,22 @@ static int mt76x0_init_wcid_mem(struct mt76x0_dev *dev)
vals[i * 2 + 1] = 0x00ffffff;
}
ret = mt76x0_burst_write_regs(dev, MT_WCID_ADDR_BASE,
vals, MT76_N_WCIDS * 2);
mt76_wr_copy(dev, MT_WCID_ADDR_BASE, vals, MT76_N_WCIDS * 2);
kfree(vals);
return ret;
return 0;
}
static int mt76x0_init_key_mem(struct mt76x0_dev *dev)
static void mt76x0_init_key_mem(struct mt76x0_dev *dev)
{
u32 vals[4] = {};
return mt76x0_burst_write_regs(dev, MT_SKEY_MODE_BASE_0,
vals, ARRAY_SIZE(vals));
mt76_wr_copy(dev, MT_SKEY_MODE_BASE_0, vals, ARRAY_SIZE(vals));
}
static int mt76x0_init_wcid_attr_mem(struct mt76x0_dev *dev)
{
u32 *vals;
int i, ret;
int i;
vals = kmalloc(sizeof(*vals) * MT76_N_WCIDS * 2, GFP_KERNEL);
if (!vals)
......@@ -287,11 +284,9 @@ static int mt76x0_init_wcid_attr_mem(struct mt76x0_dev *dev)
for (i = 0; i < MT76_N_WCIDS * 2; i++)
vals[i] = 1;
ret = mt76x0_burst_write_regs(dev, MT_WCID_ATTR_BASE,
vals, MT76_N_WCIDS * 2);
mt76_wr_copy(dev, MT_WCID_ATTR_BASE, vals, MT76_N_WCIDS * 2);
kfree(vals);
return ret;
return 0;
}
static void mt76x0_reset_counters(struct mt76x0_dev *dev)
......@@ -443,9 +438,7 @@ int mt76x0_init_hardware(struct mt76x0_dev *dev)
if (ret)
return ret;
ret = mt76x0_init_key_mem(dev);
if (ret)
return ret;
mt76x0_init_key_mem(dev);
ret = mt76x0_init_wcid_attr_mem(dev);
if (ret)
......
......@@ -77,35 +77,6 @@ mt76x0_mcu_calibrate(struct mt76x0_dev *dev, enum mcu_calibrate cal, u32 val)
return mt76_mcu_send_msg(dev, skb, CMD_CALIBRATION_OP, true);
}
int mt76x0_burst_write_regs(struct mt76x0_dev *dev, u32 offset,
const u32 *data, int n)
{
const int max_regs_per_cmd = MT_INBAND_PACKET_MAX_LEN / 4 - 1;
struct sk_buff *skb;
int cnt, i, ret;
if (!n)
return 0;
cnt = min(max_regs_per_cmd, n);
skb = alloc_skb(cnt * 4 + MT_DMA_HDR_LEN + 4, GFP_KERNEL);
if (!skb)
return -ENOMEM;
skb_reserve(skb, MT_DMA_HDR_LEN);
skb_put_le32(skb, MT_MCU_MEMMAP_WLAN + offset);
for (i = 0; i < cnt; i++)
skb_put_le32(skb, data[i]);
ret = mt76_mcu_send_msg(dev, skb, CMD_BURST_WRITE, cnt == n);
if (ret)
return ret;
return mt76x0_burst_write_regs(dev, offset + cnt * 4,
data + cnt, n - cnt);
}
struct mt76_fw_header {
__le32 ilm_len;
__le32 dlm_len;
......
......@@ -126,9 +126,6 @@ void mt76x0_init_debugfs(struct mt76x0_dev *dev);
#define mt76_rmw_field(_dev, _reg, _field, _val) \
mt76_rmw(_dev, _reg, _field, FIELD_PREP(_field, _val))
int mt76x0_burst_write_regs(struct mt76x0_dev *dev, u32 offset,
const u32 *data, int n);
/* Init */
struct mt76x0_dev *
mt76x0_alloc_device(struct device *pdev, const struct mt76_driver_ops *drv_ops);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment