Commit 349f9d52 authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'sunxi-dt-for-4.8' of...

Merge tag 'sunxi-dt-for-4.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt

Merge "Allwinner DT changes for 4.8" from Maxime Ripard:

The usual amount of DT patches, among which:
  - I2S support
  - Support for the AXP809 in the relevant boards (A80 based)
  - New boards: Banapi M1+, Banapi M2+, Allwinner Parrot (R16 EVB),
  - The other patches to enable various controllers on our boards, most
    notably USB OTG

* tag 'sunxi-dt-for-4.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (54 commits)
  ARM: dts: sun5i: Enable otg on the auxtex t004
  ARM: sun5i: Allow PLL3 2x fixed factor clock to change PLL3 rate
  ARM: sun7i: Add DAI nodes
  ARM: sun7i: Add mod1 clock nodes
  ARM: dts: sun5i: Add mmc1 / sdio-wifi node to mk802
  ARM: dts: sun5i: Add axp152 pmic node to mk802
  ARM: dts: sun5i: Enable otg on the mk802
  ARM: dts: sun7i: Add BCM53125 switch nodes to the lamobo-r1 board
  ARM: sun8i: Add Parrot Board DTS
  ARM: dts: sun5i: q8-common: Enable USB-based WiFi
  ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board
  ARM: dts: sun8i-q8-common: Add support for USB wifi controllers
  ARM: dts: sun9i: a80-optimus: Order nodes by alphabetical order
  ARM: dts: sun9i: cubieboard4: Order nodes by alphabetical order
  ARM: dts: sun7i: Add NFC node to Allwinner A20 SoC
  ARM: dts: sun4i: Add NFC node to Allwinner A10 SoC
  ARM: dts: sun6i: Add pmic / regulator nodes to Mele M9 dts
  ARM: dts: sun6i: Add pmic / regulator nodes to Mele A1000G quad dts
  ARM: dts: sun6i: The blue led on the Mele M9 is a power led
  ARM: dts: sun6i: The blue led on the Mele A1000G quad is a power led
  ...
parents 83919ef0 d509e205
......@@ -745,6 +745,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
sun6i-a31s-yones-toptech-bs1078-v2.dtb
dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-bananapi.dtb \
sun7i-a20-bananapi-m1-plus.dtb \
sun7i-a20-bananapro.dtb \
sun7i-a20-cubieboard2.dtb \
sun7i-a20-cubietruck.dtb \
......@@ -782,7 +783,9 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-h3-orangepi-2.dtb \
sun8i-h3-orangepi-one.dtb \
sun8i-h3-orangepi-pc.dtb \
sun8i-h3-orangepi-plus.dtb
sun8i-h3-orangepi-plus.dtb \
sun8i-h3-sinovoip-bpi-m2-plus.dtb \
sun8i-r16-parrot.dtb
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
sun9i-a80-cubieboard4.dtb
......
......@@ -87,6 +87,7 @@ reg_ldo4: ldo4 {
reg_ldo5: ldo5 {
regulator-name = "ldo5";
status = "disabled";
};
};
......
......@@ -126,10 +126,12 @@ reg_eldo3: eldo3 {
reg_ldo_io0: ldo_io0 {
regulator-name = "ldo_io0";
status = "disabled";
};
reg_ldo_io1: ldo_io1 {
regulator-name = "ldo_io1";
status = "disabled";
};
reg_rtc_ldo: rtc_ldo {
......@@ -139,5 +141,15 @@ reg_rtc_ldo: rtc_ldo {
regulator-max-microvolt = <3000000>;
regulator-name = "rtc_ldo";
};
reg_drivevbus: drivevbus {
regulator-name = "drivevbus";
status = "disabled";
};
};
usb_power_supply: usb_power_supply {
compatible = "x-powers,axp221-usb-power-supply";
status = "disabled";
};
};
/*
* Copyright 2015 Chen-Yu Tsai
*
* Chen-Yu Tsai <wens@csie.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/*
* AXP809 Integrated Power Management Chip
*/
&axp809 {
compatible = "x-powers,axp809";
interrupt-controller;
#interrupt-cells = <1>;
};
......@@ -72,8 +72,9 @@ red {
};
blue {
label = "a1000:blue:usr";
label = "a1000:blue:pwr";
gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
......@@ -84,6 +85,7 @@ reg_emac_3v3: emac-3v3 {
regulator-name = "emac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <20000>;
enable-active-high;
gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>;
};
......
......@@ -66,6 +66,7 @@ reg_emac_3v3: emac-3v3 {
regulator-name = "emac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <20000>;
enable-active-high;
gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;
};
......
......@@ -80,6 +80,7 @@ reg_emac_3v3: emac-3v3 {
regulator-name = "emac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <20000>;
enable-active-high;
gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
};
......
......@@ -65,8 +65,9 @@ framebuffer@0 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
<&ahb_gates 44>, <&dram_gates 26>;
clocks = <&ahb_gates 36>, <&ahb_gates 43>,
<&ahb_gates 44>, <&de_be0_clk>,
<&tcon0_ch1_clk>, <&dram_gates 26>;
status = "disabled";
};
......@@ -74,8 +75,9 @@ framebuffer@1 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
clocks = <&ahb_gates 36>, <&ahb_gates 43>,
<&ahb_gates 44>, <&ahb_gates 46>,
<&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch1_clk>,
<&dram_gates 25>, <&dram_gates 26>;
status = "disabled";
};
......@@ -84,9 +86,9 @@ framebuffer@2 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_fe0-de_be0-lcd0";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>,
<&ahb_gates 46>, <&dram_gates 25>,
<&dram_gates 26>;
clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&ahb_gates 46>,
<&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch0_clk>,
<&dram_gates 25>, <&dram_gates 26>;
status = "disabled";
};
......@@ -94,9 +96,11 @@ framebuffer@3 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
clocks = <&ahb_gates 34>, <&ahb_gates 36>,
<&ahb_gates 44>, <&ahb_gates 46>,
<&dram_gates 5>, <&dram_gates 25>, <&dram_gates 26>;
<&de_be0_clk>, <&de_fe0_clk>,
<&tcon0_ch1_clk>, <&dram_gates 5>,
<&dram_gates 25>, <&dram_gates 26>;
status = "disabled";
};
};
......@@ -574,6 +578,81 @@ dram_gates: clk@01c20100 {
"dram_de_mp", "dram_ace";
};
de_be0_clk: clk@01c20104 {
#clock-cells = <0>;
#reset-cells = <0>;
compatible = "allwinner,sun4i-a10-display-clk";
reg = <0x01c20104 0x4>;
clocks = <&pll3>, <&pll7>, <&pll5 1>;
clock-output-names = "de-be0";
};
de_be1_clk: clk@01c20108 {
#clock-cells = <0>;
#reset-cells = <0>;
compatible = "allwinner,sun4i-a10-display-clk";
reg = <0x01c20108 0x4>;
clocks = <&pll3>, <&pll7>, <&pll5 1>;
clock-output-names = "de-be1";
};
de_fe0_clk: clk@01c2010c {
#clock-cells = <0>;
#reset-cells = <0>;
compatible = "allwinner,sun4i-a10-display-clk";
reg = <0x01c2010c 0x4>;
clocks = <&pll3>, <&pll7>, <&pll5 1>;
clock-output-names = "de-fe0";
};
de_fe1_clk: clk@01c20110 {
#clock-cells = <0>;
#reset-cells = <0>;
compatible = "allwinner,sun4i-a10-display-clk";
reg = <0x01c20110 0x4>;
clocks = <&pll3>, <&pll7>, <&pll5 1>;
clock-output-names = "de-fe1";
};
tcon0_ch0_clk: clk@01c20118 {
#clock-cells = <0>;
#reset-cells = <1>;
compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
reg = <0x01c20118 0x4>;
clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
clock-output-names = "tcon0-ch0-sclk";
};
tcon1_ch0_clk: clk@01c2011c {
#clock-cells = <0>;
#reset-cells = <1>;
compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
reg = <0x01c2011c 0x4>;
clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
clock-output-names = "tcon1-ch0-sclk";
};
tcon0_ch1_clk: clk@01c2012c {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
reg = <0x01c2012c 0x4>;
clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
clock-output-names = "tcon0-ch1-sclk";
};
tcon1_ch1_clk: clk@01c20130 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
reg = <0x01c20130 0x4>;
clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
clock-output-names = "tcon1-ch1-sclk";
};
ve_clk: clk@01c2013c {
#clock-cells = <0>;
#reset-cells = <0>;
......@@ -642,6 +721,19 @@ dma: dma-controller@01c02000 {
#dma-cells = <2>;
};
nfc: nand@01c03000 {
compatible = "allwinner,sun4i-a10-nand";
reg = <0x01c03000 0x1000>;
interrupts = <37>;
clocks = <&ahb_gates 13>, <&nand_clk>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 3>;
dma-names = "rxtx";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
spi0: spi@01c05000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c05000 0x1000>;
......@@ -881,69 +973,62 @@ pio: pinctrl@01c20800 {
#interrupt-cells = <3>;
#gpio-cells = <3>;
pwm0_pins_a: pwm0@0 {
allwinner,pins = "PB2";
allwinner,function = "pwm";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
pwm1_pins_a: pwm1@0 {
allwinner,pins = "PI3";
allwinner,function = "pwm";
emac_pins_a: emac0@0 {
allwinner,pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
"PA7", "PA8", "PA9", "PA10",
"PA11", "PA12", "PA13", "PA14",
"PA15", "PA16";
allwinner,function = "emac";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart0_pins_a: uart0@0 {
allwinner,pins = "PB22", "PB23";
allwinner,function = "uart0";
i2c0_pins_a: i2c0@0 {
allwinner,pins = "PB0", "PB1";
allwinner,function = "i2c0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart0_pins_b: uart0@1 {
allwinner,pins = "PF2", "PF4";
allwinner,function = "uart0";
i2c1_pins_a: i2c1@0 {
allwinner,pins = "PB18", "PB19";
allwinner,function = "i2c1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart1_pins_a: uart1@0 {
allwinner,pins = "PA10", "PA11";
allwinner,function = "uart1";
i2c2_pins_a: i2c2@0 {
allwinner,pins = "PB20", "PB21";
allwinner,function = "i2c2";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c0_pins_a: i2c0@0 {
allwinner,pins = "PB0", "PB1";
allwinner,function = "i2c0";
ir0_rx_pins_a: ir0@0 {
allwinner,pins = "PB4";
allwinner,function = "ir0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c1_pins_a: i2c1@0 {
allwinner,pins = "PB18", "PB19";
allwinner,function = "i2c1";
ir0_tx_pins_a: ir0@1 {
allwinner,pins = "PB3";
allwinner,function = "ir0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c2_pins_a: i2c2@0 {
allwinner,pins = "PB20", "PB21";
allwinner,function = "i2c2";
ir1_rx_pins_a: ir1@0 {
allwinner,pins = "PB23";
allwinner,function = "ir1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
emac_pins_a: emac0@0 {
allwinner,pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
"PA7", "PA8", "PA9", "PA10",
"PA11", "PA12", "PA13", "PA14",
"PA15", "PA16";
allwinner,function = "emac";
ir1_tx_pins_a: ir1@1 {
allwinner,pins = "PB22";
allwinner,function = "ir1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
......@@ -963,34 +1048,41 @@ mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
ir0_rx_pins_a: ir0@0 {
allwinner,pins = "PB4";
allwinner,function = "ir0";
ps20_pins_a: ps20@0 {
allwinner,pins = "PI20", "PI21";
allwinner,function = "ps2";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
ir0_tx_pins_a: ir0@1 {
allwinner,pins = "PB3";
allwinner,function = "ir0";
ps21_pins_a: ps21@0 {
allwinner,pins = "PH12", "PH13";
allwinner,function = "ps2";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
ir1_rx_pins_a: ir1@0 {
allwinner,pins = "PB23";
allwinner,function = "ir1";
pwm0_pins_a: pwm0@0 {
allwinner,pins = "PB2";
allwinner,function = "pwm";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
ir1_tx_pins_a: ir1@1 {
allwinner,pins = "PB22";
allwinner,function = "ir1";
pwm1_pins_a: pwm1@0 {
allwinner,pins = "PI3";
allwinner,function = "pwm";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spdif_tx_pins_a: spdif@0 {
allwinner,pins = "PB13";
allwinner,function = "spdif";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
spi0_pins_a: spi0@0 {
allwinner,pins = "PI11", "PI12", "PI13";
allwinner,function = "spi0";
......@@ -1047,25 +1139,25 @@ spi2_cs0_pins_b: spi2_cs0@1 {
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
ps20_pins_a: ps20@0 {
allwinner,pins = "PI20", "PI21";
allwinner,function = "ps2";
uart0_pins_a: uart0@0 {
allwinner,pins = "PB22", "PB23";
allwinner,function = "uart0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
ps21_pins_a: ps21@0 {
allwinner,pins = "PH12", "PH13";
allwinner,function = "ps2";
uart0_pins_b: uart0@1 {
allwinner,pins = "PF2", "PF4";
allwinner,function = "uart0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spdif_tx_pins_a: spdif@0 {
allwinner,pins = "PB13";
allwinner,function = "spdif";
uart1_pins_a: uart1@0 {
allwinner,pins = "PA10", "PA11";
allwinner,function = "uart1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
......
......@@ -124,7 +124,18 @@ &ohci0 {
status = "okay";
};
&otg_sram {
status = "okay";
};
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PG12";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
mmc0_cd_pin_t004: mmc0_cd_pin@0 {
allwinner,pins = "PG1";
allwinner,function = "gpio_in";
......@@ -158,11 +169,19 @@ &uart0 {
status = "okay";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usb1_vbus_pin_a {
allwinner,pins = "PG13";
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
};
......@@ -73,6 +73,20 @@ &ehci0 {
status = "okay";
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp152: pmic@30 {
compatible = "x-powers,axp152";
reg = <0x30>;
interrupts = <0>;
interrupt-controller;
#interrupt-cells = <1>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mk802>;
......@@ -83,10 +97,23 @@ &mmc0 {
status = "okay";
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
non-removable;
status = "okay";
};
&ohci0 {
status = "okay";
};
&otg_sram {
status = "okay";
};
&pio {
led_pins_mk802: led_pins@0 {
allwinner,pins = "PB2";
......@@ -122,6 +149,11 @@ &uart0 {
status = "okay";
};
&usb_otg {
dr_mode = "peripheral";
status = "okay";
};
&usbphy {
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
......
......@@ -248,6 +248,13 @@ &reg_usb1_vbus {
status = "okay";
};
&spi2 {
pinctrl-names = "default";
pinctrl-0 = <&spi2_pins_a>,
<&spi2_cs0_pins_a>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
......
......@@ -79,6 +79,7 @@ reg_emac_3v3: emac-3v3 {
regulator-name = "emac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <20000>;
enable-active-high;
gpio = <&pio 0 2 GPIO_ACTIVE_HIGH>;
};
......@@ -195,7 +196,14 @@ &reg_ldo3 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
regulator-name = "vcc-wifi1";
};
&reg_ldo4 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi2";
};
&reg_usb1_vbus {
......
......@@ -65,8 +65,8 @@ framebuffer@0 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
<&ahb_gates 44>;
clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>,
<&ahb_gates 43>, <&ahb_gates 44>;
status = "disabled";
};
......@@ -74,7 +74,8 @@ framebuffer@1 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>,
<&ahb_gates 44>;
status = "disabled";
};
......@@ -82,8 +83,8 @@ framebuffer@2 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-tve0";
clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
<&ahb_gates 44>;
clocks = <&pll3>, <&pll5 1>, <&ahb_gates 34>,
<&ahb_gates 36>, <&ahb_gates 44>;
status = "disabled";
};
};
......@@ -241,6 +242,20 @@ mmc1_pins_a: mmc1@0 {
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi2_pins_a: spi2@0 {
allwinner,pins = "PB12", "PB13", "PB14";
allwinner,function = "spi2";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi2_cs0_pins_a: spi2_cs0@0 {
allwinner,pins = "PB11";
allwinner,function = "spi2";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&sram_a {
......
......@@ -48,13 +48,3 @@ / {
model = "Q8 A13 Tablet";
compatible = "allwinner,q8-a13", "allwinner,sun5i-a13";
};
&reg_ldo3 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
};
&usbphy {
usb1_vbus-supply = <&reg_ldo3>;
};
......@@ -207,7 +207,50 @@ tcon_ch1_clk: clk@01c2012c {
};
};
display-engine {
compatible = "allwinner,sun5i-a13-display-engine";
allwinner,pipelines = <&fe0>;
};
soc@01c00000 {
tcon0: lcd-controller@01c0c000 {
compatible = "allwinner,sun5i-a13-tcon";
reg = <0x01c0c000 0x1000>;
interrupts = <44>;
resets = <&tcon_ch0_clk 1>;
reset-names = "lcd";
clocks = <&ahb_gates 36>,
<&tcon_ch0_clk>,
<&tcon_ch1_clk>;
clock-names = "ahb",
"tcon-ch0",
"tcon-ch1";
clock-output-names = "tcon-pixel-clock";
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
tcon0_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
tcon0_in_be0: endpoint@0 {
reg = <0>;
remote-endpoint = <&be0_out_tcon0>;
};
};
tcon0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
};
};
pwm: pwm@01c20e00 {
compatible = "allwinner,sun5i-a13-pwm";
reg = <0x01c20e00 0xc>;
......@@ -215,6 +258,75 @@ pwm: pwm@01c20e00 {
#pwm-cells = <3>;
status = "disabled";
};
fe0: display-frontend@01e00000 {
compatible = "allwinner,sun5i-a13-display-frontend";
reg = <0x01e00000 0x20000>;
interrupts = <47>;
clocks = <&ahb_gates 46>, <&de_fe_clk>,
<&dram_gates 25>;
clock-names = "ahb", "mod",
"ram";
resets = <&de_fe_clk>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
fe0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
fe0_out_be0: endpoint@0 {
reg = <0>;
remote-endpoint = <&be0_in_fe0>;
};
};
};
};
be0: display-backend@01e60000 {
compatible = "allwinner,sun5i-a13-display-backend";
reg = <0x01e60000 0x10000>;
clocks = <&ahb_gates 44>, <&de_be_clk>,
<&dram_gates 26>;
clock-names = "ahb", "mod",
"ram";
resets = <&de_be_clk>;
status = "disabled";
assigned-clocks = <&de_be_clk>;
assigned-clock-rates = <300000000>;
ports {
#address-cells = <1>;
#size-cells = <0>;
be0_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
be0_in_fe0: endpoint@0 {
reg = <0>;
remote-endpoint = <&fe0_out_be0>;
};
};
be0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
be0_out_tcon0: endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon0_in_be0>;
};
};
};
};
};
};
......@@ -237,6 +349,16 @@ &cpu0 {
&pio {
compatible = "allwinner,sun5i-a13-pinctrl";
lcd_rgb666_pins: lcd_rgb666@0 {
allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
"PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
"PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
"PD24", "PD25", "PD26", "PD27";
allwinner,function = "lcd0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart1_pins_a: uart1@0 {
allwinner,pins = "PE10", "PE11";
allwinner,function = "uart1";
......
......@@ -59,6 +59,36 @@ backlight: backlight {
chosen {
stdout-path = "serial0:115200n8";
};
panel: panel {
compatible = "urt,umsh-8596md-t", "simple-panel";
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
/* TODO: lcd panel uses axp gpio0 as enable pin */
backlight = <&backlight>;
#address-cells = <1>;
#size-cells = <0>;
panel_input: endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon0_out_lcd>;
};
};
};
};
&be0 {
status = "okay";
};
&codec {
pinctrl-names = "default";
pinctrl-0 = <&codec_pa_pin>;
allwinner,pa-gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
status = "okay";
};
&cpu0 {
......@@ -100,6 +130,13 @@ &otg_sram {
};
&pio {
codec_pa_pin: codec_pa_pin@0 {
allwinner,pins = "PG10";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_cd_pin_q8: mmc0_cd_pin@0 {
allwinner,pins = "PG0";
allwinner,function = "gpio_in";
......@@ -154,11 +191,30 @@ &reg_ldo2 {
regulator-name = "avcc";
};
&reg_ldo3 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
};
&reg_usb0_vbus {
gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
status = "okay";
};
&tcon0 {
pinctrl-names = "default";
pinctrl-0 = <&lcd_rgb666_pins>;
status = "okay";
};
&tcon0_out {
tcon0_out_lcd: endpoint@0 {
reg = <0>;
remote-endpoint = <&panel_input>;
};
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_b>;
......@@ -170,11 +226,17 @@ &usb_otg {
status = "okay";
};
&usb_power_supply {
status = "okay";
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_ldo3>;
status = "okay";
};
......@@ -52,7 +52,7 @@
/ {
model = "NextThing C.H.I.P.";
compatible = "nextthing,chip", "allwinner,sun5i-r8";
compatible = "nextthing,chip", "allwinner,sun5i-r8", "allwinner,sun5i-a13";
aliases {
i2c0 = &i2c0;
......
......@@ -76,122 +76,12 @@ tve0_in_tcon0: endpoint@0 {
};
};
};
tcon0: lcd-controller@01c0c000 {
compatible = "allwinner,sun5i-a13-tcon";
reg = <0x01c0c000 0x1000>;
interrupts = <44>;
resets = <&tcon_ch0_clk 1>;
reset-names = "lcd";
clocks = <&ahb_gates 36>,
<&tcon_ch0_clk>,
<&tcon_ch1_clk>;
clock-names = "ahb",
"tcon-ch0",
"tcon-ch1";
clock-output-names = "tcon-pixel-clock";
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
tcon0_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
tcon0_in_be0: endpoint@0 {
reg = <0>;
remote-endpoint = <&be0_out_tcon0>;
};
};
tcon0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
tcon0_out_tve0: endpoint@1 {
reg = <1>;
remote-endpoint = <&tve0_in_tcon0>;
};
};
};
};
fe0: display-frontend@01e00000 {
compatible = "allwinner,sun5i-a13-display-frontend";
reg = <0x01e00000 0x20000>;
interrupts = <47>;
clocks = <&ahb_gates 46>, <&de_fe_clk>,
<&dram_gates 25>;
clock-names = "ahb", "mod",
"ram";
resets = <&de_fe_clk>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
fe0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
fe0_out_be0: endpoint@0 {
reg = <0>;
remote-endpoint = <&be0_in_fe0>;
};
};
};
};
be0: display-backend@01e60000 {
compatible = "allwinner,sun5i-a13-display-backend";
reg = <0x01e60000 0x10000>;
clocks = <&ahb_gates 44>, <&de_be_clk>,
<&dram_gates 26>;
clock-names = "ahb", "mod",
"ram";
resets = <&de_be_clk>;
status = "disabled";
assigned-clocks = <&de_be_clk>;
assigned-clock-rates = <300000000>;
ports {
#address-cells = <1>;
#size-cells = <0>;
be0_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
be0_in_fe0: endpoint@0 {
reg = <0>;
remote-endpoint = <&fe0_out_be0>;
};
};
be0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
be0_out_tcon0: endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon0_in_be0>;
};
};
};
};
};
};
display-engine {
compatible = "allwinner,sun5i-a13-display-engine";
allwinner,pipelines = <&fe0>;
&tcon0_out {
tcon0_out_tve0: endpoint@1 {
reg = <1>;
remote-endpoint = <&tve0_in_tcon0>;
};
};
......@@ -130,7 +130,7 @@ pll3: clk@01c20010 {
};
pll3x2: pll3x2_clk {
compatible = "fixed-factor-clock";
compatible = "allwinner,sun4i-a10-pll3-2x-clk", "fixed-factor-clock";
#clock-cells = <0>;
clock-div = <1>;
clock-mult = <2>;
......
......@@ -65,12 +65,17 @@ leds {
pinctrl-0 = <&led_pins_m9>;
blue {
label = "m9:blue:usr";
label = "m9:blue:pwr";
gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
};
&cpu0 {
cpu-supply = <&reg_dcdc3>;
};
&ehci0 {
status = "okay";
};
......@@ -84,6 +89,7 @@ &gmac {
pinctrl-0 = <&gmac_pins_mii_a>;
phy = <&phy1>;
phy-mode = "mii";
phy-supply = <&reg_dldo1>;
status = "okay";
phy1: ethernet-phy@1 {
......@@ -100,13 +106,26 @@ &ir {
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
vmmc-supply = <&reg_vcc3v3>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
cd-inverted;
status = "okay";
};
&p2wi {
status = "okay";
axp22x: pmic@68 {
compatible = "x-powers,axp221";
reg = <0x68>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
#include "axp22x.dtsi"
&pio {
led_pins_m9: led_pins@0 {
allwinner,pins = "PH13";
......@@ -130,6 +149,78 @@ usb1_vbus_pin_m9: usb1_vbus_pin@0 {
};
};
&reg_aldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
};
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3300000>;
regulator-name = "avcc";
};
&reg_dc5ldo {
regulator-always-on;
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-cpus"; /* This is an educated guess */
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-3v3";
};
&reg_dcdc2 {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-gpu";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc4 {
regulator-always-on;
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-sys-dll";
};
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vcc-dram";
};
&reg_dldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-ethernet-phy";
};
/*
* Both reg_usb1_vbus and reg_dldo4 need to be on for the hub attached
* to usb1 to work, and we can list only one usb1_vbus-supply, so dldo4 is
* marked as regulator-always-on.
*/
&reg_dldo4 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-usb-hub";
};
&reg_usb1_vbus {
pinctrl-names = "default";
pinctrl-0 = <&usb1_vbus_pin_m9>;
......@@ -145,5 +236,6 @@ &uart0 {
&usbphy {
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_aldo1>;
status = "okay";
};
......@@ -65,12 +65,17 @@ leds {
pinctrl-0 = <&led_pins_m9>;
blue {
label = "m9:blue:usr";
label = "a1000g:blue:pwr";
gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
};
&cpu0 {
cpu-supply = <&reg_dcdc3>;
};
&ehci0 {
status = "okay";
};
......@@ -84,6 +89,7 @@ &gmac {
pinctrl-0 = <&gmac_pins_mii_a>;
phy = <&phy1>;
phy-mode = "mii";
phy-supply = <&reg_dldo1>;
status = "okay";
phy1: ethernet-phy@1 {
......@@ -100,13 +106,26 @@ &ir {
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
vmmc-supply = <&reg_vcc3v3>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
cd-inverted;
status = "okay";
};
&p2wi {
status = "okay";
axp22x: pmic@68 {
compatible = "x-powers,axp221";
reg = <0x68>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
#include "axp22x.dtsi"
&pio {
led_pins_m9: led_pins@0 {
allwinner,pins = "PH13";
......@@ -130,6 +149,78 @@ usb1_vbus_pin_m9: usb1_vbus_pin@0 {
};
};
&reg_aldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
};
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3300000>;
regulator-name = "avcc";
};
&reg_dc5ldo {
regulator-always-on;
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-cpus"; /* This is an educated guess */
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-3v3";
};
&reg_dcdc2 {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-gpu";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc4 {
regulator-always-on;
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-sys-dll";
};
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vcc-dram";
};
&reg_dldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-ethernet-phy";
};
/*
* Both reg_usb1_vbus and reg_dldo4 need to be on for the hub attached
* to usb1 to work, and we can list only one usb1_vbus-supply, so dldo4 is
* marked as regulator-always-on.
*/
&reg_dldo4 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-usb-hub";
};
&reg_usb1_vbus {
pinctrl-names = "default";
pinctrl-0 = <&usb1_vbus_pin_m9>;
......@@ -150,5 +241,6 @@ &usb_otg {
&usbphy {
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_aldo1>;
status = "okay";
};
/*
* Copyright 2016 Luo Yi <luoyi.ly@gmail.com>
*
* Thanks to the original work by Hans de Goede <hdegoede@redhat.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun7i-a20.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
model = "Banana Pi BPI-M1-Plus";
compatible = "sinovoip,bpi-m1-plus", "allwinner,sun7i-a20";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins_bananapi>;
green {
label = "bananapi-m1-plus:green:usr";
gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
};
red {
label = "bananapi-m1-plus:red:usr";
gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
};
mmc3_pwrseq: mmc3_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pwrseq_pin_bananapim1plus>;
reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */
};
reg_gmac_3v3: gmac-3v3 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&gmac_power_pin_bananapi>;
regulator-name = "gmac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <100000>;
enable-active-high;
gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
};
};
&ahci {
status = "okay";
};
&codec {
status = "okay";
};
&ehci0 {
status = "okay";
};
&ehci1 {
status = "okay";
};
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_rgmii_a>;
phy = <&phy1>;
phy-mode = "rgmii";
phy-supply = <&reg_gmac_3v3>;
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
compatible = "x-powers,axp209";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
};
};
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
cd-inverted;
status = "okay";
};
&mmc3 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
mmc-pwrseq = <&mmc3_pwrseq>;
bus-width = <4>;
non-removable;
enable-sdio-wakeup;
status = "okay";
brcmf: bcrmf@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&pio>;
interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "host-wake";
};
};
&mmc3_pins_a {
/* AP6210 requires pull-up */
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
&ohci0 {
status = "okay";
};
&ohci1 {
status = "okay";
};
&pio {
gmac_power_pin_bananapi: gmac_power_pin@0 {
allwinner,pins = "PH23";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
led_pins_bananapi: led_pins@0 {
allwinner,pins = "PH24", "PG2";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
allwinner,pins = "PH10";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
mmc3_pwrseq_pin_bananapim1plus: mmc3_pwrseq_pin@0 {
allwinner,pins = "PH22";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
......@@ -110,13 +110,67 @@ &ehci1 {
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_rgmii_a>;
phy = <&phy1>;
phy-mode = "rgmii";
phy-supply = <&reg_gmac_3v3>;
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
fixed-link {
speed = <1000>;
full-duplex;
};
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
switch: ethernet-switch@1e {
compatible = "brcm,bcm53125";
reg = <30>;
#address-cells = <1>;
#size-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port0: port@0 {
reg = <0>;
label = "lan2";
};
port1: port@1 {
reg = <1>;
label = "lan3";
};
port2: port@2 {
reg = <2>;
label = "lan4";
};
port3: port@3 {
reg = <3>;
label = "wan";
};
port4: port@4 {
reg = <4>;
label = "lan1";
};
port8: port@8 {
reg = <8>;
label = "cpu";
ethernet = <&gmac>;
phy-mode = "rgmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
};
};
......
This diff is collapsed.
......@@ -72,10 +72,6 @@ chosen {
};
};
&ehci0 {
status = "okay";
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
......@@ -131,6 +127,13 @@ mmc0_cd_pin_mid2809: mmc0_cd_pin@0 {
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH8";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
};
&pwm {
......@@ -148,6 +151,7 @@ axp22x: pmic@3a3 {
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
eldoin-supply = <&reg_dcdc1>;
x-powers,drive-vbus-en;
};
};
......@@ -219,6 +223,11 @@ &reg_dcdc5 {
regulator-name = "vcc-dram";
};
&reg_drivevbus {
regulator-name = "usb0-vbus";
status = "okay";
};
&reg_rtc_ldo {
regulator-name = "vcc-rtc";
};
......@@ -227,17 +236,20 @@ &simplefb_lcd {
vcc-lcd-supply = <&reg_dc1sw>;
};
/*
* FIXME for now we only support host mode and rely on u-boot to have
* turned on Vbus which is controlled by the axp223 pmic on the board.
*
* Once we have axp223 support we should switch to fully supporting otg.
*/
&usb_otg {
dr_mode = "host";
dr_mode = "otg";
status = "okay";
};
&usb_power_supply {
status = "okay";
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
usb0_id_det-gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_drivevbus>;
status = "okay";
};
......@@ -48,18 +48,3 @@ / {
model = "Q8 A23 Tablet";
compatible = "allwinner,q8-a23", "allwinner,sun8i-a23";
};
/*
* FIXME for now we only support host mode and rely on u-boot to have
* turned on Vbus which is controlled by the axp223 pmic on the board.
*
* Once we have axp223 support we should switch to fully supporting otg.
*/
&usb_otg {
dr_mode = "host";
status = "okay";
};
&usbphy {
status = "okay";
};
......@@ -48,18 +48,3 @@ / {
model = "Q8 A33 Tablet";
compatible = "allwinner,q8-a33", "allwinner,sun8i-a33";
};
/*
* FIXME for now we only support host mode and rely on u-boot to have
* turned on Vbus which is controlled by the axp223 pmic on the board.
*
* Once we have axp223 support we should switch to fully supporting otg.
*/
&usb_otg {
dr_mode = "host";
status = "okay";
};
&usbphy {
status = "okay";
};
/*
* Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun8i-h3.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Sinovoip BPI-M2+";
compatible = "sinovoip,bpi-m2+", "allwinner,sun8i-h3";
aliases {
serial0 = &uart0;
serial1 = &uart1;
};
chosen {
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pwr_led_bpi_m2p>;
pwr_led {
label = "bpi-m2+:red:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
default-state = "on";
};
};
gpio_keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&sw_r_bpi_m2p>;
sw4 {
label = "power";
linux,code = <BTN_0>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
};
};
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
pinctrl-0 = <&wifi_en_bpi_m2p>;
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
};
};
&ehci1 {
status = "okay";
};
&ehci2 {
status = "okay";
};
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
cd-inverted;
status = "okay";
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
vqmmc-supply = <&reg_vcc3v3>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
brcmf: bcrmf@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&pio>;
interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
interrupt-names = "host-wake";
};
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_8bit_pins>;
vmmc-supply = <&reg_vcc3v3>;
vqmmc-supply = <&reg_vcc3v3>;
bus-width = <8>;
non-removable;
status = "okay";
};
&ohci1 {
status = "okay";
};
&ohci2 {
status = "okay";
};
&r_pio {
pwr_led_bpi_m2p: led_pins@0 {
allwinner,pins = "PL10";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
sw_r_bpi_m2p: key_pins@0 {
allwinner,pins = "PL3";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
wifi_en_bpi_m2p: wifi_en_pin {
allwinner,pins = "PL7";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_a>;
status = "okay";
};
&usbphy {
/* USB VBUS is on as long as VCC-IO is on */
status = "okay";
};
......@@ -501,13 +501,6 @@ pio: pinctrl@01c20800 {
interrupt-controller;
#interrupt-cells = <3>;
uart0_pins_a: uart0@0 {
allwinner,pins = "PA4", "PA5";
allwinner,function = "uart0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_pins_a: mmc0@0 {
allwinner,pins = "PF0", "PF1", "PF2", "PF3",
"PF4", "PF5";
......@@ -540,6 +533,20 @@ mmc2_8bit_pins: mmc2_8bit {
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart0_pins_a: uart0@0 {
allwinner,pins = "PA4", "PA5";
allwinner,function = "uart0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart1_pins_a: uart1@0 {
allwinner,pins = "PG6", "PG7", "PG8", "PG9";
allwinner,function = "uart1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
ahb_rst: reset@01c202c0 {
......
......@@ -63,6 +63,10 @@ chosen {
};
};
&ehci0 {
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>;
......@@ -87,6 +91,13 @@ mmc0_cd_pin_q8: mmc0_cd_pin@0 {
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH8";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
};
&r_rsb {
......@@ -98,6 +109,7 @@ axp22x: pmic@3a3 {
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
eldoin-supply = <&reg_dcdc1>;
x-powers,drive-vbus-en;
};
};
......@@ -163,6 +175,17 @@ &reg_dcdc5 {
regulator-name = "vcc-dram";
};
&reg_dldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
};
&reg_drivevbus {
regulator-name = "usb0-vbus";
status = "okay";
};
&reg_rtc_ldo {
regulator-name = "vcc-rtc";
};
......@@ -176,3 +199,22 @@ &r_uart {
&simplefb_lcd {
vcc-lcd-supply = <&reg_dc1sw>;
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usb_power_supply {
status = "okay";
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
usb0_id_det-gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_drivevbus>;
usb1_vbus-supply = <&reg_dldo1>;
status = "okay";
};
/*
* Copyright 2016 Quentin Schulz
*
* Quentin Schulz <quentin.schulz@free-electrons.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun8i-a33.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Allwinner R16 EVB (Parrot)";
compatible = "allwinner,parrot", "allwinner,sun8i-a33";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins_parrot>;
led1 {
label = "parrot:led1:usr";
gpio = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
};
led2 {
label = "parrot:led2:usr";
gpio = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
};
};
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
};
};
&ehci0 {
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
/*
* FIXME: An as-yet-unknown accelerometer is connected to this
* i2c bus.
*/
};
&lradc {
vref-supply = <&reg_aldo3>;
status = "okay";
button@0 {
label = "V+";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <190000>;
};
button@1 {
label = "V-";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <390000>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_parrot>;
vmmc-supply = <&reg_dcdc1>;
cd-gpios = <&pio 3 14 GPIO_ACTIVE_LOW>; /* PD14 */
bus-width = <4>;
status = "okay";
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_parrot>;
vmmc-supply = <&reg_aldo1>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_8bit_pins>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
status = "okay";
};
&mmc2_8bit_pins {
allwinner,drive = <SUN4I_PINCTRL_40_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
&ohci0 {
status = "okay";
};
&pio {
mmc0_cd_pin_parrot: mmc0_cd_pin@0 {
allwinner,pins = "PD14";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
led_pins_parrot: led_pins@0 {
allwinner,pins = "PE16", "PE17";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb0_id_det: usb0_id_detect_pin@0 {
allwinner,pins = "PD10";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
usb1_vbus_pin_parrot: usb1_vbus_pin@0 {
allwinner,pins = "PD12";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&r_pio {
wifi_reset_pin_parrot: wifi_reset_pin@0 {
allwinner,pins = "PL6";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&r_rsb {
status = "okay";
axp22x: pmic@3a3 {
compatible = "x-powers,axp223";
reg = <0x3a3>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
drivevbus-supply = <&reg_vcc5v0>;
x-powers,drive-vbus-en;
};
};
#include "axp22x.dtsi"
&reg_aldo1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-io";
};
&reg_aldo2 {
regulator-always-on;
regulator-min-microvolt = <2350000>;
regulator-max-microvolt = <2650000>;
regulator-name = "vdd-dll";
};
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-pll-avcc";
};
&reg_dc5ldo {
regulator-always-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-cpus";
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-3v0";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-sys";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vcc-dram";
};
&reg_dldo1 {
/*
* TODO: WiFi chip needs dldo1 AND dldo2 to be on to be powered.
* Remove next line once it is possible to sync two regulators.
*/
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi0";
};
&reg_dldo2 {
/*
* TODO: WiFi chip needs dldo1 AND dldo2 to be on to be powered.
* Remove next line once it is possible to sync two regulators.
*/
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi1";
};
&reg_dldo3 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-3v0-csi";
};
&reg_drivevbus {
regulator-name = "usb0-vbus";
status = "okay";
};
&reg_eldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vcc-1v2-hsic";
};
&reg_eldo2 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-dsp";
};
&reg_eldo3 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "eldo3";
};
&reg_usb1_vbus {
pinctrl-names = "default";
pinctrl-0 = <&usb1_vbus_pin_parrot>;
gpio = <&pio 3 12 GPIO_ACTIVE_HIGH>; /* PD12 */
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_b>;
status = "okay";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usb_power_supply {
status = "okay";
};
&usbphy {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_det>;
usb0_vbus-supply = <&reg_drivevbus>;
usb0_id_det-gpios = <&pio 3 10 GPIO_ACTIVE_HIGH>; /* PD10 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb1_vbus-supply = <&reg_usb1_vbus>;
};
......@@ -45,7 +45,6 @@
/dts-v1/;
#include "sun9i-a80.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
......@@ -79,26 +78,10 @@ red {
};
};
&pio {
led_pins_cubieboard4: led-pins@0 {
allwinner,pins = "PH6", "PH17";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 {
allwinner,pins = "PH18";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_cubieboard4>;
vmmc-supply = <&reg_vcc3v0>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */
cd-inverted;
......@@ -108,7 +91,7 @@ &mmc0 {
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_8bit_pins>;
vmmc-supply = <&reg_vcc3v0>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
......@@ -120,14 +103,157 @@ &mmc2_8bit_pins {
allwinner,drive = <SUN4I_PINCTRL_40_MA>;
};
&pio {
led_pins_cubieboard4: led-pins@0 {
allwinner,pins = "PH6", "PH17";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 {
allwinner,pins = "PH18";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
};
&r_ir {
status = "okay";
};
&r_rsb {
status = "okay";
axp809: pmic@3a3 {
reg = <0x3a3>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
regulators {
reg_aldo1: aldo1 {
/*
* TODO: This should be handled by the
* USB PHY driver.
*/
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc33-usbh";
};
reg_aldo2: aldo2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-pb-io-cam";
};
aldo3 {
/* unused */
};
reg_dc5ldo: dc5ldo {
regulator-always-on;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-cpus-09-usbh";
};
reg_dcdc1: dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-3v";
};
reg_dcdc2: dcdc2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-gpu";
};
reg_dcdc3: dcdc3 {
regulator-always-on;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-cpua";
};
reg_dcdc4: dcdc4 {
regulator-always-on;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-sys-usb0-hdmi";
};
reg_dcdc5: dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1425000>;
regulator-max-microvolt = <1575000>;
regulator-name = "vcc-dram";
};
reg_dldo1: dldo1 {
/*
* The WiFi chip supports a wide range
* (3.0 ~ 4.8V) of voltages, and so does
* this regulator (3.0 ~ 4.2V), but
* Allwinner SDK always sets it to 3.3V.
*/
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
};
reg_dldo2: dldo2 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pl";
};
reg_eldo1: eldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vcc-dvdd-cam";
};
reg_eldo2: eldo2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-pe";
};
reg_eldo3: eldo3 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pm-codec-io1";
};
reg_ldo_io0: ldo_io0 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pg";
};
reg_ldo_io1: ldo_io1 {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-name = "vcc-pa-gmac-2v5";
};
reg_rtc_ldo: rtc_ldo {
regulator-name = "vcc-rtc-vdd1v8-io";
};
};
};
};
#include "axp809.dtsi"
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
......
......@@ -44,7 +44,6 @@
/dts-v1/;
#include "sun9i-a80.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
......@@ -85,6 +84,17 @@ led4 {
};
};
reg_usb1_vbus: usb1-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&usb1_vbus_pin_optimus>;
regulator-name = "usb1-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
};
reg_usb3_vbus: usb3-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
......@@ -109,6 +119,31 @@ &ehci2 {
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */
cd-inverted;
status = "okay";
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_8bit_pins>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
status = "okay";
};
&mmc2_8bit_pins {
/* Increase drive strength for DDR modes */
allwinner,drive = <SUN4I_PINCTRL_40_MA>;
};
&ohci0 {
status = "okay";
};
......@@ -147,37 +182,6 @@ usb3_vbus_pin_optimus: usb3_vbus_pin@1 {
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>;
vmmc-supply = <&reg_vcc3v0>;
bus-width = <4>;
cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */
cd-inverted;
status = "okay";
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_8bit_pins>;
vmmc-supply = <&reg_vcc3v0>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
status = "okay";
};
&mmc2_8bit_pins {
/* Increase drive strength for DDR modes */
allwinner,drive = <SUN4I_PINCTRL_40_MA>;
};
&reg_usb1_vbus {
pinctrl-0 = <&usb1_vbus_pin_optimus>;
gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
status = "okay";
};
&r_ir {
status = "okay";
};
......@@ -193,8 +197,135 @@ led_r_pins_optimus: led-pins@1 {
&r_rsb {
status = "okay";
axp809: pmic@3a3 {
reg = <0x3a3>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
regulators {
reg_aldo1: aldo1 {
/*
* TODO: This should be handled by the
* USB PHY driver.
*/
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc33-usbh";
};
reg_aldo2: aldo2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-pb-io-cam";
};
aldo3 {
/* unused */
};
reg_dc5ldo: dc5ldo {
regulator-always-on;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-cpus-09-usbh";
};
reg_dcdc1: dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-3v";
};
reg_dcdc2: dcdc2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-gpu";
};
reg_dcdc3: dcdc3 {
regulator-always-on;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-cpua";
};
reg_dcdc4: dcdc4 {
regulator-always-on;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-sys-usb0-hdmi";
};
reg_dcdc5: dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1425000>;
regulator-max-microvolt = <1575000>;
regulator-name = "vcc-dram";
};
reg_dldo1: dldo1 {
/*
* The WiFi chip supports a wide range
* (3.0 ~ 4.8V) of voltages, and so does
* this regulator (3.0 ~ 4.2V), but
* Allwinner SDK always sets it to 3.3V.
*/
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
};
reg_dldo2: dldo2 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pl";
};
reg_eldo1: eldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vcc-dvdd-cam";
};
reg_eldo2: eldo2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-pe";
};
reg_eldo3: eldo3 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pm-codec-io1";
};
reg_ldo_io0: ldo_io0 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pg";
};
reg_ldo_io1: ldo_io1 {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-name = "vcc-pa-gmac-2v5";
};
reg_rtc_ldo: rtc_ldo {
regulator-name = "vcc-rtc-vdd1v8-io";
};
};
};
};
#include "axp809.dtsi"
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment