Skip to content

L
linux
Commit 356bd146 authored by Francois Romieu's avatar Francois Romieu Committed by Jeff Garzik
Browse files
Options

chelsio: spaces, tabs and friends 

Signed-off-by: default avatarFrancois Romieu <romieu@fr.zoreil.com>
parent b7d58394
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 288 additions and 288 deletions
drivers/net/chelsio/common.h
View file @ 356bd146
......@@ -324,7 +324,7 @@ struct board_info {
unsigned char mdio_phybaseaddr;
struct gmac *gmac;
struct gphy *gphy;
struct mdio_ops *mdio_ops;
struct mdio_ops *mdio_ops;
const char *desc;
};
......
drivers/net/chelsio/cpl5_cmd.h
View file @ 356bd146
......@@ -103,7 +103,7 @@ enum CPL_opcode {
CPL_MIGRATE_C2T_RPL = 0xDD,
CPL_ERROR = 0xD7,
/* internal: driver -> TOM */
/* internal: driver -> TOM */
CPL_MSS_CHANGE = 0xE1
};
......@@ -159,8 +159,8 @@ enum { // TX_PKT_LSO ethernet types
};
union opcode_tid {
u32 opcode_tid;
u8 opcode;
u32 opcode_tid;
u8 opcode;
};
#define S_OPCODE 24
......@@ -234,7 +234,7 @@ struct cpl_pass_accept_req {
u32 local_ip;
u32 peer_ip;
u32 tos_tid;
struct tcp_options tcp_options;
struct tcp_options tcp_options;
u8 dst_mac[6];
u16 vlan_tag;
u8 src_mac[6];
......@@ -250,12 +250,12 @@ struct cpl_pass_accept_rpl {
u32 peer_ip;
u32 opt0h;
union {
u32 opt0l;
struct {
u8 rsvd[3];
u8 status;
u32 opt0l;
struct {
u8 rsvd[3];
u8 status;
};
};
};
};
struct cpl_act_open_req {
......
drivers/net/chelsio/cxgb2.c
View file @ 356bd146
......@@ -69,14 +69,14 @@ static inline void cancel_mac_stats_update(struct adapter *ap)
cancel_delayed_work(&ap->stats_update_task);
}
#define MAX_CMDQ_ENTRIES 16384
#define MAX_CMDQ1_ENTRIES 1024
#define MAX_RX_BUFFERS 16384
#define MAX_RX_JUMBO_BUFFERS 16384
#define MAX_CMDQ_ENTRIES 16384
#define MAX_CMDQ1_ENTRIES 1024
#define MAX_RX_BUFFERS 16384
#define MAX_RX_JUMBO_BUFFERS 16384
#define MAX_TX_BUFFERS_HIGH 16384U
#define MAX_TX_BUFFERS_LOW 1536U
#define MAX_TX_BUFFERS 1460U
#define MIN_FL_ENTRIES 32
#define MIN_FL_ENTRIES 32
#define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \
NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\
......@@ -143,7 +143,7 @@ static void link_report(struct port_info *p)
case SPEED_100: s = "100Mbps"; break;
}
printk(KERN_INFO "%s: link up, %s, %s-duplex\n",
printk(KERN_INFO "%s: link up, %s, %s-duplex\n",
p->dev->name, s,
p->link_config.duplex == DUPLEX_FULL ? "full" : "half");
}
......@@ -233,7 +233,7 @@ static int cxgb_up(struct adapter *adapter)
t1_sge_start(adapter->sge);
t1_interrupts_enable(adapter);
out_err:
out_err:
return err;
}
......@@ -749,7 +749,7 @@ static int set_sge_param(struct net_device *dev, struct ethtool_ringparam *e)
return -EINVAL;
if (adapter->flags & FULL_INIT_DONE)
return -EBUSY;
return -EBUSY;
adapter->params.sge.freelQ_size[!jumbo_fl] = e->rx_pending;
adapter->params.sge.freelQ_size[jumbo_fl] = e->rx_jumbo_pending;
......@@ -764,7 +764,7 @@ static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
struct adapter *adapter = dev->priv;
adapter->params.sge.rx_coalesce_usecs = c->rx_coalesce_usecs;
adapter->params.sge.coalesce_enable = c->use_adaptive_rx_coalesce;
adapter->params.sge.coalesce_enable = c->use_adaptive_rx_coalesce;
adapter->params.sge.sample_interval_usecs = c->rate_sample_interval;
t1_sge_set_coalesce_params(adapter->sge, &adapter->params.sge);
return 0;
......@@ -782,9 +782,9 @@ static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
static int get_eeprom_len(struct net_device *dev)
{
struct adapter *adapter = dev->priv;
struct adapter *adapter = dev->priv;
return t1_is_asic(adapter) ? EEPROM_SIZE : 0;
return t1_is_asic(adapter) ? EEPROM_SIZE : 0;
}
#define EEPROM_MAGIC(ap) \
......@@ -848,7 +848,7 @@ static int t1_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
u32 val;
if (!phy->mdio_read)
return -EOPNOTSUPP;
return -EOPNOTSUPP;
phy->mdio_read(adapter, data->phy_id, 0, data->reg_num & 0x1f,
&val);
data->val_out = val;
......@@ -860,7 +860,7 @@ static int t1_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
if (!capable(CAP_NET_ADMIN))
return -EPERM;
if (!phy->mdio_write)
return -EOPNOTSUPP;
return -EOPNOTSUPP;
phy->mdio_write(adapter, data->phy_id, 0, data->reg_num & 0x1f,
data->val_in);
break;
......@@ -879,9 +879,9 @@ static int t1_change_mtu(struct net_device *dev, int new_mtu)
struct cmac *mac = adapter->port[dev->if_port].mac;
if (!mac->ops->set_mtu)
return -EOPNOTSUPP;
return -EOPNOTSUPP;
if (new_mtu < 68)
return -EINVAL;
return -EINVAL;
if ((ret = mac->ops->set_mtu(mac, new_mtu)))
return ret;
dev->mtu = new_mtu;
......@@ -1211,9 +1211,9 @@ static int __devinit init_one(struct pci_dev *pdev,
return 0;
out_release_adapter_res:
out_release_adapter_res:
t1_free_sw_modules(adapter);
out_free_dev:
out_free_dev:
if (adapter) {
if (adapter->regs)
iounmap(adapter->regs);
......@@ -1222,7 +1222,7 @@ static int __devinit init_one(struct pci_dev *pdev,
free_netdev(adapter->port[i].dev);
}
pci_release_regions(pdev);
out_disable_pdev:
out_disable_pdev:
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
return err;
......@@ -1273,20 +1273,20 @@ static int t1_clock(struct adapter *adapter, int mode)
int M_MEM_VAL;
enum {
M_CORE_BITS = 9,
T_CORE_VAL = 0,
T_CORE_BITS = 2,
N_CORE_VAL = 0,
N_CORE_BITS = 2,
M_MEM_BITS = 9,
T_MEM_VAL = 0,
T_MEM_BITS = 2,
N_MEM_VAL = 0,
N_MEM_BITS = 2,
NP_LOAD = 1 << 17,
S_LOAD_MEM = 1 << 5,
S_LOAD_CORE = 1 << 6,
S_CLOCK = 1 << 3
M_CORE_BITS = 9,
T_CORE_VAL = 0,
T_CORE_BITS = 2,
N_CORE_VAL = 0,
N_CORE_BITS = 2,
M_MEM_BITS = 9,
T_MEM_VAL = 0,
T_MEM_BITS = 2,
N_MEM_VAL = 0,
N_MEM_BITS = 2,
NP_LOAD = 1 << 17,
S_LOAD_MEM = 1 << 5,
S_LOAD_CORE = 1 << 6,
S_CLOCK = 1 << 3
};
if (!t1_is_T1B(adapter))
......
drivers/net/chelsio/elmer0.h
View file @ 356bd146
......@@ -46,14 +46,14 @@ enum {
};
/* ELMER0 registers */
#define A_ELMER0_VERSION 0x100000
#define A_ELMER0_PHY_CFG 0x100004
#define A_ELMER0_INT_ENABLE 0x100008
#define A_ELMER0_INT_CAUSE 0x10000c
#define A_ELMER0_GPI_CFG 0x100010
#define A_ELMER0_GPI_STAT 0x100014
#define A_ELMER0_GPO 0x100018
#define A_ELMER0_PORT0_MI1_CFG 0x400000
#define A_ELMER0_VERSION 0x100000
#define A_ELMER0_PHY_CFG 0x100004
#define A_ELMER0_INT_ENABLE 0x100008
#define A_ELMER0_INT_CAUSE 0x10000c
#define A_ELMER0_GPI_CFG 0x100010
#define A_ELMER0_GPI_STAT 0x100014
#define A_ELMER0_GPO 0x100018
#define A_ELMER0_PORT0_MI1_CFG 0x400000
#define S_MI1_MDI_ENABLE 0
#define V_MI1_MDI_ENABLE(x) ((x) << S_MI1_MDI_ENABLE)
......@@ -111,18 +111,18 @@ enum {
#define V_MI1_OP_BUSY(x) ((x) << S_MI1_OP_BUSY)
#define F_MI1_OP_BUSY V_MI1_OP_BUSY(1U)
#define A_ELMER0_PORT1_MI1_CFG 0x500000
#define A_ELMER0_PORT1_MI1_ADDR 0x500004
#define A_ELMER0_PORT1_MI1_DATA 0x500008
#define A_ELMER0_PORT1_MI1_OP 0x50000c
#define A_ELMER0_PORT2_MI1_CFG 0x600000
#define A_ELMER0_PORT2_MI1_ADDR 0x600004
#define A_ELMER0_PORT2_MI1_DATA 0x600008
#define A_ELMER0_PORT2_MI1_OP 0x60000c
#define A_ELMER0_PORT3_MI1_CFG 0x700000
#define A_ELMER0_PORT3_MI1_ADDR 0x700004
#define A_ELMER0_PORT3_MI1_DATA 0x700008
#define A_ELMER0_PORT3_MI1_OP 0x70000c
#define A_ELMER0_PORT1_MI1_CFG 0x500000
#define A_ELMER0_PORT1_MI1_ADDR 0x500004
#define A_ELMER0_PORT1_MI1_DATA 0x500008
#define A_ELMER0_PORT1_MI1_OP 0x50000c
#define A_ELMER0_PORT2_MI1_CFG 0x600000
#define A_ELMER0_PORT2_MI1_ADDR 0x600004
#define A_ELMER0_PORT2_MI1_DATA 0x600008
#define A_ELMER0_PORT2_MI1_OP 0x60000c
#define A_ELMER0_PORT3_MI1_CFG 0x700000
#define A_ELMER0_PORT3_MI1_ADDR 0x700004
#define A_ELMER0_PORT3_MI1_DATA 0x700008
#define A_ELMER0_PORT3_MI1_OP 0x70000c
/* Simple bit definition for GPI and GP0 registers. */
#define ELMER0_GP_BIT0 0x0001
......
drivers/net/chelsio/espi.c
View file @ 356bd146
......@@ -202,9 +202,9 @@ static void espi_setup_for_pm3393(adapter_t *adapter)
static void espi_setup_for_vsc7321(adapter_t *adapter)
{
writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0);
writel(0x1f401f4, adapter->regs + A_ESPI_SCH_TOKEN1);
writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2);
writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0);
writel(0x1f401f4, adapter->regs + A_ESPI_SCH_TOKEN1);
writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2);
writel(0xa00, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
writel(0x1ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
writel(1, adapter->regs + A_ESPI_CALENDAR_LENGTH);
......@@ -247,10 +247,10 @@ int t1_espi_init(struct peespi *espi, int mac_type, int nports)
writel(V_OUT_OF_SYNC_COUNT(4) |
V_DIP2_PARITY_ERR_THRES(3) |
V_DIP4_THRES(1), adapter->regs + A_ESPI_MISC_CONTROL);
writel(nports == 4 ? 0x200040 : 0x1000080,
writel(nports == 4 ? 0x200040 : 0x1000080,
adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
} else
writel(0x800100, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
writel(0x800100, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
if (mac_type == CHBT_MAC_PM3393)
espi_setup_for_pm3393(adapter);
......@@ -341,32 +341,31 @@ u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait)
* compare with t1_espi_get_mon(), it reads espiInTxSop[0 ~ 3] in
* one shot, since there is no per port counter on the out side.
*/
int
t1_espi_get_mon_t204(adapter_t *adapter, u32 *valp, u8 wait)
int t1_espi_get_mon_t204(adapter_t *adapter, u32 *valp, u8 wait)
{
struct peespi *espi = adapter->espi;
struct peespi *espi = adapter->espi;
u8 i, nport = (u8)adapter->params.nports;
if (!wait) {
if (!spin_trylock(&espi->lock))
return -1;
} else
spin_lock(&espi->lock);
if (!wait) {
if (!spin_trylock(&espi->lock))
return -1;
} else
spin_lock(&espi->lock);
if ( (espi->misc_ctrl & MON_MASK) != F_MONITORED_DIRECTION ) {
if ((espi->misc_ctrl & MON_MASK) != F_MONITORED_DIRECTION) {
espi->misc_ctrl = (espi->misc_ctrl & ~MON_MASK) |
F_MONITORED_DIRECTION;
writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
}
writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
}
for (i = 0 ; i < nport; i++, valp++) {
if (i) {
writel(espi->misc_ctrl | V_MONITORED_PORT_NUM(i),
adapter->regs + A_ESPI_MISC_CONTROL);
}
*valp = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
}
*valp = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
}
writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
spin_unlock(&espi->lock);
return 0;
writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
spin_unlock(&espi->lock);
return 0;
}
drivers/net/chelsio/fpga_defs.h
View file @ 356bd146
......@@ -98,9 +98,9 @@
#define A_MI0_DATA_INT 0xb10
/* GMAC registers */
#define A_GMAC_MACID_LO 0x28
#define A_GMAC_MACID_HI 0x2c
#define A_GMAC_CSR 0x30
#define A_GMAC_MACID_LO 0x28
#define A_GMAC_MACID_HI 0x2c
#define A_GMAC_CSR 0x30
#define S_INTERFACE 0
#define M_INTERFACE 0x3
......
drivers/net/chelsio/gmac.h
View file @ 356bd146
......@@ -42,8 +42,15 @@
#include "common.h"
enum { MAC_STATS_UPDATE_FAST, MAC_STATS_UPDATE_FULL };
enum { MAC_DIRECTION_RX = 1, MAC_DIRECTION_TX = 2 };
enum {
MAC_STATS_UPDATE_FAST,
MAC_STATS_UPDATE_FULL
};
enum {
MAC_DIRECTION_RX = 1,
MAC_DIRECTION_TX = 2
};
struct cmac_statistics {
/* Transmit */
......
drivers/net/chelsio/ixf1010.c
View file @ 356bd146
......@@ -358,8 +358,8 @@ static void enable_port(struct cmac *mac)
val |= (1 << index);
t1_tpi_write(adapter, REG_PORT_ENABLE, val);
index <<= 2;
if (is_T2(adapter)) {
index <<= 2;
if (is_T2(adapter)) {
/* T204: set the Fifo water level & threshold */
t1_tpi_write(adapter, RX_FIFO_HIGH_WATERMARK_BASE + index, 0x740);
t1_tpi_write(adapter, RX_FIFO_LOW_WATERMARK_BASE + index, 0x730);
......
drivers/net/chelsio/mv88e1xxx.c
View file @ 356bd146
......@@ -73,9 +73,8 @@ static int mv88e1xxx_interrupt_enable(struct cphy *cphy)
t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
elmer |= ELMER0_GP_BIT1;
if (is_T2(cphy->adapter)) {
elmer |= ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4;
}
if (is_T2(cphy->adapter))
elmer |= ELMER0_GP_BIT2 | ELMER0_GP_BIT3 | ELMER0_GP_BIT4;
t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
}
return 0;
......@@ -92,9 +91,8 @@ static int mv88e1xxx_interrupt_disable(struct cphy *cphy)
t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
elmer &= ~ELMER0_GP_BIT1;
if (is_T2(cphy->adapter)) {
if (is_T2(cphy->adapter))
elmer &= ~(ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4);
}
t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
}
return 0;
......@@ -112,9 +110,8 @@ static int mv88e1xxx_interrupt_clear(struct cphy *cphy)
if (t1_is_asic(cphy->adapter)) {
t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer);
elmer |= ELMER0_GP_BIT1;
if (is_T2(cphy->adapter)) {
if (is_T2(cphy->adapter))
elmer |= ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4;
}
t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer);
}
return 0;
......@@ -300,7 +297,7 @@ static int mv88e1xxx_interrupt_handler(struct cphy *cphy)
/*
* Loop until cause reads zero. Need to handle bouncing interrupts.
*/
*/
while (1) {
u32 cause;
......@@ -379,11 +376,11 @@ static struct cphy *mv88e1xxx_phy_create(adapter_t *adapter, int phy_addr,
}
(void) mv88e1xxx_downshift_set(cphy, 1); /* Enable downshift */
/* LED */
/* LED */
if (is_T2(adapter)) {
(void) simple_mdio_write(cphy,
MV88E1XXX_LED_CONTROL_REGISTER, 0x1);
}
}
return cphy;
}
......
drivers/net/chelsio/pm3393.c
View file @ 356bd146
......@@ -455,8 +455,8 @@ static void pm3393_rmon_update(struct adapter *adapter, u32 offs, u64 *val,
static const struct cmac_statistics *pm3393_update_statistics(struct cmac *mac,
int flag)
{
u64 ro;
u32 val0, val1, val2, val3;
u64 ro;
u32 val0, val1, val2, val3;
/* Snap the counters */
pmwrite(mac, SUNI1x10GEXP_REG_MSTAT_CONTROL,
......@@ -534,9 +534,9 @@ static int pm3393_macaddress_set(struct cmac *cmac, u8 ma[6])
/* Store local copy */
memcpy(cmac->instance->mac_addr, ma, 6);
lo = ((u32) ma[1] << 8) | (u32) ma[0];
lo = ((u32) ma[1] << 8) | (u32) ma[0];
mid = ((u32) ma[3] << 8) | (u32) ma[2];
hi = ((u32) ma[5] << 8) | (u32) ma[4];
hi = ((u32) ma[5] << 8) | (u32) ma[4];
/* Disable Rx/Tx MAC before configuring it. */
if (enabled)
......
drivers/net/chelsio/sge.c
View file @ 356bd146
This diff is collapsed.
drivers/net/chelsio/subr.c
View file @ 356bd146
......@@ -223,13 +223,13 @@ static int fpga_slow_intr(adapter_t *adapter)
t1_sge_intr_error_handler(adapter->sge);
if (cause & FPGA_PCIX_INTERRUPT_GMAC)
fpga_phy_intr_handler(adapter);
fpga_phy_intr_handler(adapter);
if (cause & FPGA_PCIX_INTERRUPT_TP) {
/*
/*
* FPGA doesn't support MC4 interrupts and it requires
* this odd layer of indirection for MC5.
*/
*/
u32 tp_cause = readl(adapter->regs + FPGA_TP_ADDR_INTERRUPT_CAUSE);
/* Clear TP interrupt */
......@@ -262,8 +262,7 @@ static int mi1_wait_until_ready(adapter_t *adapter, int mi1_reg)
udelay(10);
} while (busy && --attempts);
if (busy)
CH_ALERT("%s: MDIO operation timed out\n",
adapter->name);
CH_ALERT("%s: MDIO operation timed out\n", adapter->name);
return busy;
}
......@@ -605,23 +604,23 @@ int t1_elmer0_ext_intr_handler(adapter_t *adapter)
switch (board_info(adapter)->board) {
#ifdef CONFIG_CHELSIO_T1_1G
case CHBT_BOARD_CHT204:
case CHBT_BOARD_CHT204E:
case CHBT_BOARD_CHN204:
case CHBT_BOARD_CHT204V: {
int i, port_bit;
case CHBT_BOARD_CHT204:
case CHBT_BOARD_CHT204E:
case CHBT_BOARD_CHN204:
case CHBT_BOARD_CHT204V: {
int i, port_bit;
for_each_port(adapter, i) {
port_bit = i + 1;
if (!(cause & (1 << port_bit)))
continue;
phy = adapter->port[i].phy;
phy = adapter->port[i].phy;
phy_cause = phy->ops->interrupt_handler(phy);
if (phy_cause & cphy_cause_link_change)
t1_link_changed(adapter, i);
}
break;
}
break;
}
case CHBT_BOARD_CHT101:
if (cause & ELMER0_GP_BIT1) { /* Marvell 88E1111 interrupt */
phy = adapter->port[0].phy;
......@@ -632,13 +631,13 @@ int t1_elmer0_ext_intr_handler(adapter_t *adapter)
break;
case CHBT_BOARD_7500: {
int p;
/*
/*
* Elmer0's interrupt cause isn't useful here because there is
* only one bit that can be set for all 4 ports. This means
* we are forced to check every PHY's interrupt status
* register to see who initiated the interrupt.
*/
for_each_port(adapter, p) {
*/
for_each_port(adapter, p) {
phy = adapter->port[p].phy;
phy_cause = phy->ops->interrupt_handler(phy);
if (phy_cause & cphy_cause_link_change)
......@@ -659,7 +658,7 @@ int t1_elmer0_ext_intr_handler(adapter_t *adapter)
break;
case CHBT_BOARD_8000:
case CHBT_BOARD_CHT110:
CH_DBG(adapter, INTR, "External interrupt cause 0x%x\n",
CH_DBG(adapter, INTR, "External interrupt cause 0x%x\n",
cause);
if (cause & ELMER0_GP_BIT1) { /* PMC3393 INTB */
struct cmac *mac = adapter->port[0].mac;
......@@ -671,9 +670,9 @@ int t1_elmer0_ext_intr_handler(adapter_t *adapter)
t1_tpi_read(adapter,
A_ELMER0_GPI_STAT, &mod_detect);
CH_MSG(adapter, INFO, LINK, "XPAK %s\n",
CH_MSG(adapter, INFO, LINK, "XPAK %s\n",
mod_detect ? "removed" : "inserted");
}
}
break;
#ifdef CONFIG_CHELSIO_T1_COUGAR
case CHBT_BOARD_COUGAR:
......@@ -757,7 +756,7 @@ void t1_interrupts_disable(adapter_t* adapter)
/* Disable PCIX & external chip interrupts. */
if (t1_is_asic(adapter))
writel(0, adapter->regs + A_PL_ENABLE);
writel(0, adapter->regs + A_PL_ENABLE);
/* PCI-X interrupts */
pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, 0);
......@@ -832,11 +831,11 @@ int t1_slow_intr_handler(adapter_t *adapter)
/* Power sequencing is a work-around for Intel's XPAKs. */
static void power_sequence_xpak(adapter_t* adapter)
{
u32 mod_detect;
u32 gpo;
u32 mod_detect;
u32 gpo;
/* Check for XPAK */
t1_tpi_read(adapter, A_ELMER0_GPI_STAT, &mod_detect);
/* Check for XPAK */
t1_tpi_read(adapter, A_ELMER0_GPI_STAT, &mod_detect);
if (!(ELMER0_GP_BIT5 & mod_detect)) {
/* XPAK is present */
t1_tpi_read(adapter, A_ELMER0_GPO, &gpo);
......@@ -879,31 +878,31 @@ static int board_init(adapter_t *adapter, const struct board_info *bi)
case CHBT_BOARD_N210:
case CHBT_BOARD_CHT210:
case CHBT_BOARD_COUGAR:
t1_tpi_par(adapter, 0xf);
t1_tpi_write(adapter, A_ELMER0_GPO, 0x800);
t1_tpi_par(adapter, 0xf);
t1_tpi_write(adapter, A_ELMER0_GPO, 0x800);
break;
case CHBT_BOARD_CHT110:
t1_tpi_par(adapter, 0xf);
t1_tpi_write(adapter, A_ELMER0_GPO, 0x1800);
t1_tpi_par(adapter, 0xf);
t1_tpi_write(adapter, A_ELMER0_GPO, 0x1800);
/* TBD XXX Might not need. This fixes a problem
* described in the Intel SR XPAK errata.
*/
power_sequence_xpak(adapter);
/* TBD XXX Might not need. This fixes a problem
* described in the Intel SR XPAK errata.
*/
power_sequence_xpak(adapter);
break;
#ifdef CONFIG_CHELSIO_T1_1G
case CHBT_BOARD_CHT204E:
/* add config space write here */
case CHBT_BOARD_CHT204E:
/* add config space write here */
case CHBT_BOARD_CHT204:
case CHBT_BOARD_CHT204V:
case CHBT_BOARD_CHN204:
t1_tpi_par(adapter, 0xf);
t1_tpi_write(adapter, A_ELMER0_GPO, 0x804);
break;
t1_tpi_par(adapter, 0xf);
t1_tpi_write(adapter, A_ELMER0_GPO, 0x804);
break;
case CHBT_BOARD_CHT101:
case CHBT_BOARD_7500:
t1_tpi_par(adapter, 0xf);
t1_tpi_write(adapter, A_ELMER0_GPO, 0x1804);
t1_tpi_par(adapter, 0xf);
t1_tpi_write(adapter, A_ELMER0_GPO, 0x1804);
break;
#endif
}
......@@ -943,7 +942,7 @@ int t1_init_hw_modules(adapter_t *adapter)
goto out_err;
err = 0;
out_err:
out_err:
return err;
}
......@@ -985,7 +984,7 @@ void t1_free_sw_modules(adapter_t *adapter)
if (adapter->espi)
t1_espi_destroy(adapter->espi);
#ifdef CONFIG_CHELSIO_T1_COUGAR
if (adapter->cspi)
if (adapter->cspi)
t1_cspi_destroy(adapter->cspi);
#endif
}
......@@ -1012,7 +1011,7 @@ static void __devinit init_link_config(struct link_config *lc,
CH_ERR("%s: CSPI initialization failed\n",
adapter->name);
goto error;
}
}
#endif
/*
......
drivers/net/chelsio/tp.c
View file @ 356bd146
......@@ -17,39 +17,36 @@ struct petp {
static void tp_init(adapter_t * ap, const struct tp_params *p,
unsigned int tp_clk)
{
if (t1_is_asic(ap)) {
u32 val;
val = F_TP_IN_CSPI_CPL | F_TP_IN_CSPI_CHECK_IP_CSUM |
F_TP_IN_CSPI_CHECK_TCP_CSUM | F_TP_IN_ESPI_ETHERNET;
if (!p->pm_size)
val |= F_OFFLOAD_DISABLE;
else
val |= F_TP_IN_ESPI_CHECK_IP_CSUM |
F_TP_IN_ESPI_CHECK_TCP_CSUM;
writel(val, ap->regs + A_TP_IN_CONFIG);
writel(F_TP_OUT_CSPI_CPL |
F_TP_OUT_ESPI_ETHERNET |
F_TP_OUT_ESPI_GENERATE_IP_CSUM |
F_TP_OUT_ESPI_GENERATE_TCP_CSUM,
ap->regs + A_TP_OUT_CONFIG);
writel(V_IP_TTL(64) |
F_PATH_MTU /* IP DF bit */ |
V_5TUPLE_LOOKUP(p->use_5tuple_mode) |
V_SYN_COOKIE_PARAMETER(29),
ap->regs + A_TP_GLOBAL_CONFIG);
/*
* Enable pause frame deadlock prevention.
*/
if (is_T2(ap) && ap->params.nports > 1) {
u32 drop_ticks = DROP_MSEC * (tp_clk / 1000);
writel(F_ENABLE_TX_DROP | F_ENABLE_TX_ERROR |
V_DROP_TICKS_CNT(drop_ticks) |
V_NUM_PKTS_DROPPED(DROP_PKTS_CNT),
ap->regs + A_TP_TX_DROP_CONFIG);
}
u32 val;
if (!t1_is_asic(ap))
return;
val = F_TP_IN_CSPI_CPL | F_TP_IN_CSPI_CHECK_IP_CSUM |
F_TP_IN_CSPI_CHECK_TCP_CSUM | F_TP_IN_ESPI_ETHERNET;
if (!p->pm_size)
val |= F_OFFLOAD_DISABLE;
else
val |= F_TP_IN_ESPI_CHECK_IP_CSUM | F_TP_IN_ESPI_CHECK_TCP_CSUM;
writel(val, ap->regs + A_TP_IN_CONFIG);
writel(F_TP_OUT_CSPI_CPL |
F_TP_OUT_ESPI_ETHERNET |
F_TP_OUT_ESPI_GENERATE_IP_CSUM |
F_TP_OUT_ESPI_GENERATE_TCP_CSUM, ap->regs + A_TP_OUT_CONFIG);
writel(V_IP_TTL(64) |
F_PATH_MTU /* IP DF bit */ |
V_5TUPLE_LOOKUP(p->use_5tuple_mode) |
V_SYN_COOKIE_PARAMETER(29), ap->regs + A_TP_GLOBAL_CONFIG);
/*
* Enable pause frame deadlock prevention.
*/
if (is_T2(ap) && ap->params.nports > 1) {
u32 drop_ticks = DROP_MSEC * (tp_clk / 1000);
writel(F_ENABLE_TX_DROP | F_ENABLE_TX_ERROR |
V_DROP_TICKS_CNT(drop_ticks) |
V_NUM_PKTS_DROPPED(DROP_PKTS_CNT),
ap->regs + A_TP_TX_DROP_CONFIG);
}
}
......@@ -61,6 +58,7 @@ void t1_tp_destroy(struct petp *tp)
struct petp *__devinit t1_tp_create(adapter_t * adapter, struct tp_params *p)
{
struct petp *tp = kzalloc(sizeof(*tp), GFP_KERNEL);
if (!tp)
return NULL;
......
drivers/net/chelsio/vsc7326.c
View file @ 356bd146
......@@ -234,14 +234,14 @@ static void run_table(adapter_t *adapter, struct init_table *ib, int len)
static int bist_rd(adapter_t *adapter, int moduleid, int address)
{
int data=0;
u32 result=0;
if( (address != 0x0) &&
(address != 0x1) &&
(address != 0x2) &&
(address != 0xd) &&
(address != 0xe))
int data = 0;
u32 result = 0;
if ((address != 0x0) &&
(address != 0x1) &&
(address != 0x2) &&
(address != 0xd) &&
(address != 0xe))
CH_ERR("No bist address: 0x%x\n", address);
data = ((0x00 << 24) | ((address & 0xff) << 16) | (0x00 << 8) |
......@@ -251,9 +251,9 @@ static int bist_rd(adapter_t *adapter, int moduleid, int address)
udelay(10);
vsc_read(adapter, REG_RAM_BIST_RESULT, &result);
if((result & (1<<9)) != 0x0)
if ((result & (1 << 9)) != 0x0)
CH_ERR("Still in bist read: 0x%x\n", result);
else if((result & (1<<8)) != 0x0)
else if ((result & (1 << 8)) != 0x0)
CH_ERR("bist read error: 0x%x\n", result);
return (result & 0xff);
......@@ -261,17 +261,17 @@ static int bist_rd(adapter_t *adapter, int moduleid, int address)
static int bist_wr(adapter_t *adapter, int moduleid, int address, int value)
{
int data=0;
u32 result=0;
if( (address != 0x0) &&
(address != 0x1) &&
(address != 0x2) &&
(address != 0xd) &&
(address != 0xe))
int data = 0;
u32 result = 0;
if ((address != 0x0) &&
(address != 0x1) &&
(address != 0x2) &&
(address != 0xd) &&
(address != 0xe))
CH_ERR("No bist address: 0x%x\n", address);
if( value>255 )
if (value > 255)
CH_ERR("Suspicious write out of range value: 0x%x\n", value);
data = ((0x01 << 24) | ((address & 0xff) << 16) | (value << 8) |
......@@ -281,9 +281,9 @@ static int bist_wr(adapter_t *adapter, int moduleid, int address, int value)
udelay(5);
vsc_read(adapter, REG_RAM_BIST_CMD, &result);
if((result & (1<<27)) != 0x0)
if ((result & (1 << 27)) != 0x0)
CH_ERR("Still in bist write: 0x%x\n", result);
else if((result & (1<<26)) != 0x0)
else if ((result & (1 << 26)) != 0x0)
CH_ERR("bist write error: 0x%x\n", result);
return 0;
......@@ -321,15 +321,14 @@ static int enable_mem(adapter_t *adapter, int moduleid)
static int run_bist_all(adapter_t *adapter)
{
int port=0;
u32 val=0;
int port = 0;
u32 val = 0;
vsc_write(adapter, REG_MEM_BIST, 0x5);
vsc_read(adapter, REG_MEM_BIST, &val);
for(port=0; port<12; port++){
for (port = 0; port < 12; port++)
vsc_write(adapter, REG_DEV_SETUP(port), 0x0);
}
udelay(300);
vsc_write(adapter, REG_SPI4_MISC, 0x00040409);
......@@ -352,9 +351,9 @@ static int run_bist_all(adapter_t *adapter)
udelay(300);
vsc_write(adapter, REG_SPI4_MISC, 0x60040400);
udelay(300);
for(port=0; port<12; port++){
for (port = 0; port < 12; port++)
vsc_write(adapter, REG_DEV_SETUP(port), 0x1);
}
udelay(300);
vsc_write(adapter, REG_MEM_BIST, 0x0);
mdelay(10);
......@@ -612,7 +611,7 @@ static void port_stats_update(struct cmac *mac)
rmon_update(mac, REG_RX_SYMBOL_CARRIER(port),
&mac->stats.RxSymbolErrors);
rmon_update(mac, REG_RX_SIZE_1519_TO_MAX(port),
&mac->stats.RxJumboFramesOK);
&mac->stats.RxJumboFramesOK);
/* Tx stats (skip collision stats as we are full-duplex only) */
rmon_update(mac, REG_TX_OK_BYTES(port), &mac->stats.TxOctetsOK);
......@@ -624,7 +623,7 @@ static void port_stats_update(struct cmac *mac)
rmon_update(mac, REG_TX_PAUSE(port), &mac->stats.TxPauseFrames);
rmon_update(mac, REG_TX_UNDERRUN(port), &mac->stats.TxUnderrun);
rmon_update(mac, REG_TX_SIZE_1519_TO_MAX(port),
&mac->stats.TxJumboFramesOK);
&mac->stats.TxJumboFramesOK);
}
/*
......
drivers/net/chelsio/vsc8244.c
View file @ 356bd146
......@@ -54,7 +54,7 @@ enum {
};
#define CFG_CHG_INTR_MASK (VSC_INTR_LINK_CHG | VSC_INTR_NEG_ERR | \
VSC_INTR_NEG_DONE)
VSC_INTR_NEG_DONE)
#define INTR_MASK (CFG_CHG_INTR_MASK | VSC_INTR_TX_FIFO | VSC_INTR_RX_FIFO | \
VSC_INTR_ENABLE)
......@@ -94,19 +94,18 @@ static int vsc8244_intr_enable(struct cphy *cphy)
{
simple_mdio_write(cphy, VSC8244_INTR_ENABLE, INTR_MASK);
/* Enable interrupts through Elmer */
/* Enable interrupts through Elmer */
if (t1_is_asic(cphy->adapter)) {
u32 elmer;
t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
elmer |= ELMER0_GP_BIT1;
if (is_T2(cphy->adapter)) {
if (is_T2(cphy->adapter))
elmer |= ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4;
}
t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
}
return 0;
return 0;
}
static int vsc8244_intr_disable(struct cphy *cphy)
......@@ -118,19 +117,18 @@ static int vsc8244_intr_disable(struct cphy *cphy)
t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
elmer &= ~ELMER0_GP_BIT1;
if (is_T2(cphy->adapter)) {
if (is_T2(cphy->adapter))
elmer &= ~(ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4);
}
t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
}
return 0;
return 0;
}
static int vsc8244_intr_clear(struct cphy *cphy)
{
u32 val;
u32 elmer;
u32 elmer;
/* Clear PHY interrupts by reading the register. */
simple_mdio_read(cphy, VSC8244_INTR_ENABLE, &val);
......@@ -138,13 +136,12 @@ static int vsc8244_intr_clear(struct cphy *cphy)
if (t1_is_asic(cphy->adapter)) {
t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer);
elmer |= ELMER0_GP_BIT1;
if (is_T2(cphy->adapter)) {
if (is_T2(cphy->adapter))
elmer |= ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4;
}
t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer);
}
return 0;
return 0;
}
/*
......@@ -179,13 +176,13 @@ static int vsc8244_set_speed_duplex(struct cphy *phy, int speed, int duplex)
int t1_mdio_set_bits(struct cphy *phy, int mmd, int reg, unsigned int bits)
{
int ret;
unsigned int val;
int ret;
unsigned int val;
ret = mdio_read(phy, mmd, reg, &val);
if (!ret)
ret = mdio_write(phy, mmd, reg, val | bits);
return ret;
ret = mdio_read(phy, mmd, reg, &val);
if (!ret)
ret = mdio_write(phy, mmd, reg, val | bits);
return ret;
}
static int vsc8244_autoneg_enable(struct cphy *cphy)
......@@ -235,7 +232,7 @@ static int vsc8244_advertise(struct cphy *phy, unsigned int advertise_map)
}
static int vsc8244_get_link_status(struct cphy *cphy, int *link_ok,
int *speed, int *duplex, int *fc)
int *speed, int *duplex, int *fc)
{
unsigned int bmcr, status, lpa, adv;
int err, sp = -1, dplx = -1, pause = 0;
......@@ -343,7 +340,8 @@ static struct cphy_ops vsc8244_ops = {
.get_link_status = vsc8244_get_link_status
};
static struct cphy* vsc8244_phy_create(adapter_t *adapter, int phy_addr, struct mdio_ops *mdio_ops)
static struct cphy* vsc8244_phy_create(adapter_t *adapter, int phy_addr,
struct mdio_ops *mdio_ops)
{
struct cphy *cphy = kzalloc(sizeof(*cphy), GFP_KERNEL);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7