Commit 35bc99aa authored by Pierre-Louis Bossart's avatar Pierre-Louis Bossart Committed by Mark Brown

ASoC: Intel: Skylake: Add more platform granularity

The current SKYLAKE kconfig is a all-you-can-eat selection that will
support all known plaforms. This is however not necessarily a good
thing: most platforms for SKL and KBL don't support the DSP, but a
number of CNL/WHL ones do. Selecting this driver in all cases isn't
really smart and will require users to muck with blacklists.

Partition the configs to allow distributions to select on which
platform this driver is used. Keep the existing SND_SOC_INTEL_SKYLAKE
config to select everything for backwards compatibility. This patch does
not provide new functionality, only finer-grained choices in supported
platforms.
Signed-off-by: default avatarPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent ae38d267
......@@ -102,15 +102,74 @@ config SND_SST_ATOM_HIFI2_PLATFORM_ACPI
recommended option
config SND_SOC_INTEL_SKYLAKE
tristate "SKL/BXT/KBL/GLK/CNL... Platforms"
tristate "All Skylake/SST Platforms"
depends on PCI && ACPI
select SND_SOC_INTEL_SKYLAKE_COMMON
select SND_SOC_INTEL_SKL
select SND_SOC_INTEL_APL
select SND_SOC_INTEL_KBL
select SND_SOC_INTEL_GLK
select SND_SOC_INTEL_CNL
select SND_SOC_INTEL_CFL
help
If you have a Intel Skylake/Broxton/ApolloLake/KabyLake/
GeminiLake or CannonLake platform with the DSP enabled in the BIOS
then enable this option by saying Y or m.
This is a backwards-compatible option to select all devices
supported by the Intel SST/Skylake driver. This option is no
longer recommended and will be deprecated when the SOF
driver is introduced. Distributions should explicitly
select which platform uses this driver.
config SND_SOC_INTEL_SKL
tristate "Skylake Platforms"
depends on PCI && ACPI
select SND_SOC_INTEL_SKYLAKE_FAMILY
help
If you have a Intel Skylake platform with the DSP enabled
in the BIOS then enable this option by saying Y or m.
config SND_SOC_INTEL_APL
tristate "Broxton/ApolloLake Platforms"
depends on PCI && ACPI
select SND_SOC_INTEL_SKYLAKE_FAMILY
help
If you have a Intel Broxton/ApolloLake platform with the DSP
enabled in the BIOS then enable this option by saying Y or m.
config SND_SOC_INTEL_KBL
tristate "Kabylake Platforms"
depends on PCI && ACPI
select SND_SOC_INTEL_SKYLAKE_FAMILY
help
If you have a Intel Kabylake platform with the DSP
enabled in the BIOS then enable this option by saying Y or m.
config SND_SOC_INTEL_GLK
tristate "GeminiLake Platforms"
depends on PCI && ACPI
select SND_SOC_INTEL_SKYLAKE_FAMILY
help
If you have a Intel GeminiLake platform with the DSP
enabled in the BIOS then enable this option by saying Y or m.
config SND_SOC_INTEL_CNL
tristate "CannonLake/WhiskyLake Platforms"
depends on PCI && ACPI
select SND_SOC_INTEL_SKYLAKE_FAMILY
help
If you have a Intel CNL/WHL platform with the DSP
enabled in the BIOS then enable this option by saying Y or m.
config SND_SOC_INTEL_CFL
tristate "CoffeeLake Platforms"
depends on PCI && ACPI
select SND_SOC_INTEL_SKYLAKE_FAMILY
help
If you have a Intel CoffeeLake platform with the DSP
enabled in the BIOS then enable this option by saying Y or m.
config SND_SOC_INTEL_SKYLAKE_FAMILY
tristate
select SND_SOC_INTEL_SKYLAKE_COMMON
if SND_SOC_INTEL_SKYLAKE
if SND_SOC_INTEL_SKYLAKE_FAMILY
config SND_SOC_INTEL_SKYLAKE_SSP_CLK
tristate
......@@ -135,7 +194,7 @@ config SND_SOC_INTEL_SKYLAKE_COMMON
GeminiLake or CannonLake platform with the DSP enabled in the BIOS
then enable this option by saying Y or m.
endif ## SND_SOC_INTEL_SKYLAKE
endif ## SND_SOC_INTEL_SKYLAKE_FAMILY
config SND_SOC_ACPI_INTEL_MATCH
tristate
......
......@@ -172,7 +172,7 @@ config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH
endif ## SND_SST_ATOM_HIFI2_PLATFORM
if SND_SOC_INTEL_SKYLAKE
if SND_SOC_INTEL_SKL
config SND_SOC_INTEL_SKL_RT286_MACH
tristate "SKL with RT286 I2S mode"
......@@ -212,6 +212,10 @@ config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH
Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
endif ## SND_SOC_INTEL_SKL
if SND_SOC_INTEL_APL
config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH
tristate "Broxton with DA7219 and MAX98357A in I2S Mode"
depends on MFD_INTEL_LPSS && I2C && ACPI
......@@ -239,6 +243,10 @@ config SND_SOC_INTEL_BXT_RT298_MACH
Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
endif ## SND_SOC_INTEL_APL
if SND_SOC_INTEL_KBL
config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH
tristate "KBL with RT5663 and MAX98927 in I2S Mode"
depends on MFD_INTEL_LPSS && I2C && ACPI
......@@ -303,6 +311,10 @@ config SND_SOC_INTEL_KBL_RT5660_MACH
create an alsa sound card for RT5660 I2S audio codec.
Say Y if you have such a device.
endif ## SND_SOC_INTEL_KBL
if SND_SOC_INTEL_GLK
config SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH
tristate "GLK with RT5682 and MAX98357A in I2S Mode"
depends on MFD_INTEL_LPSS && I2C && ACPI
......@@ -317,7 +329,7 @@ config SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH
Say Y if you have such a device.
If unsure select "N".
endif ## SND_SOC_INTEL_SKYLAKE
endif ## SND_SOC_INTEL_GLK
if SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC
......
......@@ -1142,24 +1142,36 @@ static void skl_remove(struct pci_dev *pci)
/* PCI IDs */
static const struct pci_device_id skl_ids[] = {
#if IS_ENABLED(CONFIG_SND_SOC_INTEL_SKL)
/* Sunrise Point-LP */
{ PCI_DEVICE(0x8086, 0x9d70),
.driver_data = (unsigned long)&snd_soc_acpi_intel_skl_machines},
#endif
#if IS_ENABLED(CONFIG_SND_SOC_INTEL_APL)
/* BXT-P */
{ PCI_DEVICE(0x8086, 0x5a98),
.driver_data = (unsigned long)&snd_soc_acpi_intel_bxt_machines},
#endif
#if IS_ENABLED(CONFIG_SND_SOC_INTEL_KBL)
/* KBL */
{ PCI_DEVICE(0x8086, 0x9D71),
.driver_data = (unsigned long)&snd_soc_acpi_intel_kbl_machines},
#endif
#if IS_ENABLED(CONFIG_SND_SOC_INTEL_GLK)
/* GLK */
{ PCI_DEVICE(0x8086, 0x3198),
.driver_data = (unsigned long)&snd_soc_acpi_intel_glk_machines},
#endif
#if IS_ENABLED(CONFIG_SND_SOC_INTEL_CNL)
/* CNL */
{ PCI_DEVICE(0x8086, 0x9dc8),
.driver_data = (unsigned long)&snd_soc_acpi_intel_cnl_machines},
#endif
#if IS_ENABLED(CONFIG_SND_SOC_INTEL_CFL)
/* CFL */
{ PCI_DEVICE(0x8086, 0xa348),
.driver_data = (unsigned long)&snd_soc_acpi_intel_cnl_machines},
#endif
{ 0, }
};
MODULE_DEVICE_TABLE(pci, skl_ids);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment