Commit 36156cdf authored by Ralf Baechle's avatar Ralf Baechle Committed by Jeff Garzik

[PATCH] declance: Use physical addresses at the interface level.

Use physical addresses at the interface level, letting drivers remap
them as appropriate.
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>

 drivers/net/declance.c |   26 ++++++++++----------------
 1 files changed, 10 insertions(+), 16 deletions(-)
Signed-off-by: default avatarJeff Garzik <jgarzik@pobox.com>
parent 4569504a
......@@ -5,7 +5,7 @@
*
* adopted from sunlance.c by Richard van den Berg
*
* Copyright (C) 2002, 2003 Maciej W. Rozycki
* Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki
*
* additional sources:
* - PMAD-AA TURBOchannel Ethernet Module Functional Specification,
......@@ -57,13 +57,15 @@
#include <linux/string.h>
#include <asm/addrspace.h>
#include <asm/system.h>
#include <asm/dec/interrupts.h>
#include <asm/dec/ioasic.h>
#include <asm/dec/ioasic_addrs.h>
#include <asm/dec/kn01.h>
#include <asm/dec/machtype.h>
#include <asm/dec/system.h>
#include <asm/dec/tc.h>
#include <asm/system.h>
static char version[] __devinitdata =
"declance.c: v0.009 by Linux MIPS DECstation task force\n";
......@@ -79,10 +81,6 @@ MODULE_LICENSE("GPL");
#define PMAD_LANCE 2
#define PMAX_LANCE 3
#ifndef CONFIG_TC
unsigned long system_base;
unsigned long dmaptr;
#endif
#define LE_CSR0 0
#define LE_CSR1 1
......@@ -1027,10 +1025,6 @@ static int __init dec_lance_init(const int type, const int slot)
unsigned long esar_base;
unsigned char *esar;
#ifndef CONFIG_TC
system_base = KN01_LANCE_BASE;
#endif
if (dec_lance_debug && version_printed++ == 0)
printk(version);
......@@ -1063,7 +1057,7 @@ static int __init dec_lance_init(const int type, const int slot)
switch (type) {
#ifdef CONFIG_TC
case ASIC_LANCE:
dev->base_addr = system_base + IOASIC_LANCE;
dev->base_addr = CKSEG1ADDR(dec_kn_slot_base + IOASIC_LANCE);
/* buffer space for the on-board LANCE shared memory */
/*
......@@ -1072,7 +1066,7 @@ static int __init dec_lance_init(const int type, const int slot)
dev->mem_start = CKSEG1ADDR(0x00020000);
dev->mem_end = dev->mem_start + 0x00020000;
dev->irq = dec_interrupt[DEC_IRQ_LANCE];
esar_base = system_base + IOASIC_ESAR;
esar_base = CKSEG1ADDR(dec_kn_slot_base + IOASIC_ESAR);
/* Workaround crash with booting KN04 2.1k from Disk */
memset((void *)dev->mem_start, 0,
......@@ -1109,7 +1103,7 @@ static int __init dec_lance_init(const int type, const int slot)
case PMAD_LANCE:
claim_tc_card(slot);
dev->mem_start = get_tc_base_addr(slot);
dev->mem_start = CKSEG1ADDR(get_tc_base_addr(slot));
dev->base_addr = dev->mem_start + 0x100000;
dev->irq = get_tc_irq_nr(slot);
esar_base = dev->mem_start + 0x1c0002;
......@@ -1138,9 +1132,9 @@ static int __init dec_lance_init(const int type, const int slot)
case PMAX_LANCE:
dev->irq = dec_interrupt[DEC_IRQ_LANCE];
dev->base_addr = KN01_LANCE_BASE;
dev->mem_start = KN01_LANCE_BASE + 0x01000000;
esar_base = KN01_RTC_BASE + 1;
dev->base_addr = CKSEG1ADDR(KN01_SLOT_BASE + KN01_LANCE);
dev->mem_start = CKSEG1ADDR(KN01_SLOT_BASE + KN01_LANCE_MEM);
esar_base = CKSEG1ADDR(KN01_SLOT_BASE + KN01_ESAR + 1);
lp->dma_irq = -1;
/*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment