Commit 374e0bf5 authored by Thomas Abraham's avatar Thomas Abraham Committed by Ben Dooks

ARM: S5PV210: Add armclk of clksrc_clk clock type

This patch modifies the following.

1. Adds arm clock 'clk_armclk' of type clksrc_clk clock type.
2. Adds arm clock to the list of system clocks 'sysclks' for
   registering it along with other system clocks.
3. Modifies the armclk clock rate calculation procedure to be
   based on the new clk_armclk clock.
Signed-off-by: default avatarThomas Abraham <thomas.ab@samsung.com>
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
parent c62ec6a9
......@@ -58,6 +58,26 @@ static struct clksrc_clk clk_mout_mpll = {
.reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
};
static struct clk *clkset_armclk_list[] = {
[0] = &clk_mout_apll.clk,
[1] = &clk_mout_mpll.clk,
};
static struct clksrc_sources clkset_armclk = {
.sources = clkset_armclk_list,
.nr_sources = ARRAY_SIZE(clkset_armclk_list),
};
static struct clksrc_clk clk_armclk = {
.clk = {
.name = "armclk",
.id = -1,
},
.sources = &clkset_armclk,
.reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 1 },
.reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 3 },
};
static int s5pv210_clk_ip0_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKGATE_IP0, clk, enable);
......@@ -328,6 +348,7 @@ static struct clksrc_clk *sysclks[] = {
&clk_mout_apll,
&clk_mout_epll,
&clk_mout_mpll,
&clk_armclk,
};
#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
......@@ -376,7 +397,7 @@ void __init_or_cpufreq s5pv210_setup_clocks(void)
printk(KERN_INFO "S5PV210: PLL settings, A=%ld, M=%ld, E=%ld",
apll, mpll, epll);
armclk = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_APLL);
armclk = clk_get_rate(&clk_armclk.clk);
if (__raw_readl(S5P_CLK_SRC0) & S5P_CLKSRC0_MUX200_MASK)
hclk200 = mpll / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK200);
else
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment