drm: bridge: dw-hdmi: Move HPD handling to PHY operations

The HDMI TX controller support HPD and RXSENSE signaling from the PHY
via it's STAT0 PHY interface, but some vendor PHYs can manage these
signals independently from the controller, thus these STAT0 handling
should be moved to PHY specific operations and become optional.

The existing STAT0 HPD and RXSENSE handling code is refactored into
a supplementaty set of default PHY operations that are used automatically
when the platform glue doesn't provide its own operations.
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491309119-24220-2-git-send-email-narmstrong@baylibre.com

drivers/gpu/drm/bridge/synopsys/dw-hdmi.c

@@ -1229,10 +1229,46 @@ static enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
 		connector_status_connected : connector_status_disconnected;
 }
 
+static void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
+				   bool force, bool disabled, bool rxsense)
+{
+	u8 old_mask = hdmi->phy_mask;
+
+	if (force || disabled || !rxsense)
+		hdmi->phy_mask |= HDMI_PHY_RX_SENSE;
+	else
+		hdmi->phy_mask &= ~HDMI_PHY_RX_SENSE;
+
+	if (old_mask != hdmi->phy_mask)
+		hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
+}
+
+static void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data)
+{
+	/*
+	 * Configure the PHY RX SENSE and HPD interrupts polarities and clear
+	 * any pending interrupt.
+	 */
+	hdmi_writeb(hdmi, HDMI_PHY_HPD | HDMI_PHY_RX_SENSE, HDMI_PHY_POL0);
+	hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE,
+		    HDMI_IH_PHY_STAT0);
+
+	/* Enable cable hot plug irq. */
+	hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
+
+	/* Clear and unmute interrupts. */
+	hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE,
+		    HDMI_IH_PHY_STAT0);
+	hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE),
+		    HDMI_IH_MUTE_PHY_STAT0);
+}
+
 static const struct dw_hdmi_phy_ops dw_hdmi_synopsys_phy_ops = {
 	.init = dw_hdmi_phy_init,
 	.disable = dw_hdmi_phy_disable,
 	.read_hpd = dw_hdmi_phy_read_hpd,
+	.update_hpd = dw_hdmi_phy_update_hpd,
+	.setup_hpd = dw_hdmi_phy_setup_hpd,
 };
 
 /* -----------------------------------------------------------------------------
@@ -1808,35 +1844,10 @@ static void dw_hdmi_update_power(struct dw_hdmi *hdmi)
  */
 static void dw_hdmi_update_phy_mask(struct dw_hdmi *hdmi)
 {
-	u8 old_mask = hdmi->phy_mask;
-
-	if (hdmi->force || hdmi->disabled || !hdmi->rxsense)
-		hdmi->phy_mask |= HDMI_PHY_RX_SENSE;
-	else
-		hdmi->phy_mask &= ~HDMI_PHY_RX_SENSE;
-
-	if (old_mask != hdmi->phy_mask)
-		hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
-}
-
-static void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi)
-{
-	/*
-	 * Configure the PHY RX SENSE and HPD interrupts polarities and clear
-	 * any pending interrupt.
-	 */
-	hdmi_writeb(hdmi, HDMI_PHY_HPD | HDMI_PHY_RX_SENSE, HDMI_PHY_POL0);
-	hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE,
-		    HDMI_IH_PHY_STAT0);
-
-	/* Enable cable hot plug irq. */
-	hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
-
-	/* Clear and unmute interrupts. */
-	hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE,
-		    HDMI_IH_PHY_STAT0);
-	hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE),
-		    HDMI_IH_MUTE_PHY_STAT0);
+	if (hdmi->phy.ops->update_hpd)
+		hdmi->phy.ops->update_hpd(hdmi, hdmi->phy.data,
+					  hdmi->force, hdmi->disabled,
+					  hdmi->rxsense);
 }
 
 static enum drm_connector_status
@@ -2028,6 +2039,41 @@ static irqreturn_t dw_hdmi_hardirq(int irq, void *dev_id)
 	return ret;
 }
 
+void __dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool hpd, bool rx_sense)
+{
+	mutex_lock(&hdmi->mutex);
+
+	if (!hdmi->force) {
+		/*
+		 * If the RX sense status indicates we're disconnected,
+		 * clear the software rxsense status.
+		 */
+		if (!rx_sense)
+			hdmi->rxsense = false;
+
+		/*
+		 * Only set the software rxsense status when both
+		 * rxsense and hpd indicates we're connected.
+		 * This avoids what seems to be bad behaviour in
+		 * at least iMX6S versions of the phy.
+		 */
+		if (hpd)
+			hdmi->rxsense = true;
+
+		dw_hdmi_update_power(hdmi);
+		dw_hdmi_update_phy_mask(hdmi);
+	}
+	mutex_unlock(&hdmi->mutex);
+}
+
+void dw_hdmi_setup_rx_sense(struct device *dev, bool hpd, bool rx_sense)
+{
+	struct dw_hdmi *hdmi = dev_get_drvdata(dev);
+
+	__dw_hdmi_setup_rx_sense(hdmi, hpd, rx_sense);
+}
+EXPORT_SYMBOL_GPL(dw_hdmi_setup_rx_sense);
+
 static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
 {
 	struct dw_hdmi *hdmi = dev_id;
@@ -2060,30 +2106,10 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
 	 * ask the source to re-read the EDID.
 	 */
 	if (intr_stat &
-	    (HDMI_IH_PHY_STAT0_RX_SENSE | HDMI_IH_PHY_STAT0_HPD)) {
-		mutex_lock(&hdmi->mutex);
-		if (!hdmi->force) {
-			/*
-			 * If the RX sense status indicates we're disconnected,
-			 * clear the software rxsense status.
-			 */
-			if (!(phy_stat & HDMI_PHY_RX_SENSE))
-				hdmi->rxsense = false;
-
-			/*
-			 * Only set the software rxsense status when both
-			 * rxsense and hpd indicates we're connected.
-			 * This avoids what seems to be bad behaviour in
-			 * at least iMX6S versions of the phy.
-			 */
-			if (phy_stat & HDMI_PHY_HPD)
-				hdmi->rxsense = true;
-
-			dw_hdmi_update_power(hdmi);
-			dw_hdmi_update_phy_mask(hdmi);
-		}
-		mutex_unlock(&hdmi->mutex);
-	}
+	    (HDMI_IH_PHY_STAT0_RX_SENSE | HDMI_IH_PHY_STAT0_HPD))
+		__dw_hdmi_setup_rx_sense(hdmi,
+					 phy_stat & HDMI_PHY_HPD,
+					 phy_stat & HDMI_PHY_RX_SENSE);
 
 	if (intr_stat & HDMI_IH_PHY_STAT0_HPD) {
 		dev_dbg(hdmi->dev, "EVENT=%s\n",
@@ -2357,7 +2383,8 @@ __dw_hdmi_probe(struct platform_device *pdev,
 #endif
 
 	dw_hdmi_setup_i2c(hdmi);
-	dw_hdmi_phy_setup_hpd(hdmi);
+	if (hdmi->phy.ops->setup_hpd)
+		hdmi->phy.ops->setup_hpd(hdmi, hdmi->phy.data);
 
 	memset(&pdevinfo, 0, sizeof(pdevinfo));
 	pdevinfo.parent = dev;

include/drm/bridge/dw_hdmi.h

@@ -117,6 +117,9 @@ struct dw_hdmi_phy_ops {
 		    struct drm_display_mode *mode);
 	void (*disable)(struct dw_hdmi *hdmi, void *data);
 	enum drm_connector_status (*read_hpd)(struct dw_hdmi *hdmi, void *data);
+	void (*update_hpd)(struct dw_hdmi *hdmi, void *data,
+			   bool force, bool disabled, bool rxsense);
+	void (*setup_hpd)(struct dw_hdmi *hdmi, void *data);
 };
 
 struct dw_hdmi_plat_data {
@@ -147,6 +150,8 @@ void dw_hdmi_unbind(struct device *dev);
 int dw_hdmi_bind(struct platform_device *pdev, struct drm_encoder *encoder,
 		 const struct dw_hdmi_plat_data *plat_data);
 
+void dw_hdmi_setup_rx_sense(struct device *dev, bool hpd, bool rx_sense);
+
 void dw_hdmi_set_sample_rate(struct dw_hdmi *hdmi, unsigned int rate);
 void dw_hdmi_audio_enable(struct dw_hdmi *hdmi);
 void dw_hdmi_audio_disable(struct dw_hdmi *hdmi);