ARM: pxa: add clk support in gpio driver

Support clk in gpio driver. There's no gpio clock in PXA25x and PXA27x.
So use dummy clk instead. And move the gpio edge initialization into
gpio driver for arch-mmp.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>

arch/arm/mach-mmp/mmp2.c

@@ -93,18 +93,9 @@ void mmp2_clear_pmic_int(void)
 	__raw_writel(data, mfpr_pmic);
 }
 
-static void __init mmp2_init_gpio(void)
-{
-	int i;
-
-	/* enable GPIO clock */
-	__raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_MMP2_GPIO);
-}
-
 void __init mmp2_init_irq(void)
 {
 	mmp2_init_icu();
-	mmp2_init_gpio();
 }
 
 static void sdhc_clk_enable(struct clk *clk)
@@ -141,6 +132,7 @@ static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000);
 static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000);
 static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000);
 static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000);
+static APBC_CLK(gpio, MMP2_GPIO, 0, 26000000);
 
 static APMU_CLK(nand, NAND, 0xbf, 100000000);
 static APMU_CLK_OPS(sdh0, SDH0, 0x1b, 200000000, &sdhc_clk_ops);
@@ -160,6 +152,7 @@ static struct clk_lookup mmp2_clkregs[] = {
 	INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL),
 	INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL),
 	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
 	INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"),
 	INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"),
 	INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"),

arch/arm/mach-mmp/pxa168.c

@@ -43,18 +43,9 @@ static struct mfp_addr_map pxa168_mfp_addr_map[] __initdata =
 	MFP_ADDR_END,
 };
 
-static void __init pxa168_init_gpio(void)
-{
-	int i;
-
-	/* enable GPIO clock */
-	__raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA168_GPIO);
-}
-
 void __init pxa168_init_irq(void)
 {
 	icu_init_irq();
-	pxa168_init_gpio();
 }
 
 /* APB peripheral clocks */
@@ -72,6 +63,7 @@ static APBC_CLK(ssp2, PXA168_SSP2, 4, 0);
 static APBC_CLK(ssp3, PXA168_SSP3, 4, 0);
 static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
 static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
+static APBC_CLK(gpio, PXA168_GPIO, 0, 13000000);
 static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
 
 static APMU_CLK(nand, NAND, 0x19b, 156000000);
@@ -97,6 +89,7 @@ static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
 	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
 	INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
+	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
 	INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
 	INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
 	INIT_CLKREG(&clk_usb, "pxa168-ehci", "PXA168-USBCLK"),

arch/arm/mach-mmp/pxa910.c

@@ -77,18 +77,9 @@ static struct mfp_addr_map pxa910_mfp_addr_map[] __initdata =
 	MFP_ADDR_END,
 };
 
-static void __init pxa910_init_gpio(void)
-{
-	int i;
-
-	/* enable GPIO clock */
-	__raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA910_GPIO);
-}
-
 void __init pxa910_init_irq(void)
 {
 	icu_init_irq();
-	pxa910_init_gpio();
 }
 
 /* APB peripheral clocks */
@@ -100,6 +91,7 @@ static APBC_CLK(pwm1, PXA910_PWM1, 1, 13000000);
 static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000);
 static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
 static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
+static APBC_CLK(gpio, PXA910_GPIO, 0, 13000000);
 
 static APMU_CLK(nand, NAND, 0x19b, 156000000);
 static APMU_CLK(u2o, USB, 0x1b, 480000000);
@@ -115,6 +107,7 @@ static struct clk_lookup pxa910_clkregs[] = {
 	INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
 	INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
 	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
 	INIT_CLKREG(&clk_u2o, "pxa-u2o", "U2OCLK"),
 };
 

arch/arm/mach-pxa/pxa25x.c

@@ -209,6 +209,7 @@ static struct clk_lookup pxa25x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
 	INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
 	INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
 };
 
 static struct clk_lookup pxa25x_hwuart_clkreg =

arch/arm/mach-pxa/pxa27x.c

@@ -230,6 +230,7 @@ static struct clk_lookup pxa27x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
 	INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
 	INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
 };
 
 #ifdef CONFIG_PM

arch/arm/mach-pxa/pxa3xx.c

@@ -55,6 +55,7 @@ static DEFINE_PXA3_CKEN(pxa3xx_pwm0, PWM0, 13000000, 0);
 static DEFINE_PXA3_CKEN(pxa3xx_pwm1, PWM1, 13000000, 0);
 static DEFINE_PXA3_CKEN(pxa3xx_mmc1, MMC1, 19500000, 0);
 static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0);
+static DEFINE_PXA3_CKEN(pxa3xx_gpio, GPIO, 13000000, 0);
 
 static DEFINE_CK(pxa3xx_lcd, LCD, &clk_pxa3xx_hsio_ops);
 static DEFINE_CK(pxa3xx_smemc, SMC, &clk_pxa3xx_smemc_ops);
@@ -87,6 +88,7 @@ static struct clk_lookup pxa3xx_clkregs[] = {
 	INIT_CLKREG(&clk_pxa3xx_mmc1, "pxa2xx-mci.0", NULL),
 	INIT_CLKREG(&clk_pxa3xx_mmc2, "pxa2xx-mci.1", NULL),
 	INIT_CLKREG(&clk_pxa3xx_smemc, "pxa2xx-pcmcia", NULL),
+	INIT_CLKREG(&clk_pxa3xx_gpio, "pxa-gpio", NULL),
 };
 
 #ifdef CONFIG_PM

arch/arm/mach-pxa/pxa95x.c

@@ -211,6 +211,7 @@ static DEFINE_PXA3_CKEN(pxa95x_ssp3, SSP3, 13000000, 0);
 static DEFINE_PXA3_CKEN(pxa95x_ssp4, SSP4, 13000000, 0);
 static DEFINE_PXA3_CKEN(pxa95x_pwm0, PWM0, 13000000, 0);
 static DEFINE_PXA3_CKEN(pxa95x_pwm1, PWM1, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_gpio, GPIO, 13000000, 0);
 
 static struct clk_lookup pxa95x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa95x_pout, NULL, "CLK_POUT"),
@@ -229,6 +230,7 @@ static struct clk_lookup pxa95x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa95x_ssp4, "pxa27x-ssp.3", NULL),
 	INIT_CLKREG(&clk_pxa95x_pwm0, "pxa27x-pwm.0", NULL),
 	INIT_CLKREG(&clk_pxa95x_pwm1, "pxa27x-pwm.1", NULL),
+	INIT_CLKREG(&clk_pxa95x_gpio, "pxa-gpio", NULL),
 };
 
 void __init pxa95x_init_irq(void)

drivers/gpio/gpio-pxa.c

@@ -11,6 +11,8 @@
  *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation.
  */
+#include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/gpio.h>
 #include <linux/gpio-pxa.h>
 #include <linux/init.h>
@@ -466,7 +468,8 @@ static int __devinit pxa_gpio_probe(struct platform_device *pdev)
 {
 	struct pxa_gpio_chip *c;
 	struct resource *res;
-	int gpio, irq;
+	struct clk *clk;
+	int gpio, irq, ret;
 	int irq0 = 0, irq1 = 0, irq_mux, gpio_offset = 0;
 
 	pxa_last_gpio = pxa_gpio_nums();
@@ -489,6 +492,27 @@ static int __devinit pxa_gpio_probe(struct platform_device *pdev)
 	if (irq0 > 0)
 		gpio_offset = 2;
 
+	clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "Error %ld to get gpio clock\n",
+			PTR_ERR(clk));
+		iounmap(gpio_reg_base);
+		return PTR_ERR(clk);
+	}
+	ret = clk_prepare(clk);
+	if (ret) {
+		clk_put(clk);
+		iounmap(gpio_reg_base);
+		return ret;
+	}
+	ret = clk_enable(clk);
+	if (ret) {
+		clk_unprepare(clk);
+		clk_put(clk);
+		iounmap(gpio_reg_base);
+		return ret;
+	}
+
 	/* Initialize GPIO chips */
 	pxa_init_gpio_chip(pxa_last_gpio);