staging: unisys: Move controlframework into controlvmchannel.h

Controlframework was only needed by controlvmchannel, move the
structures into that header file.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/unisys/common-spar/include/channels/controlframework.h

-/* Copyright (C) 2010 - 2013 UNISYS CORPORATION
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- */
-
-/*
- * Module Name:
- *  controlframework.h
- *
- * Abstract: This file defines common structures in the unmanaged
- *	     Ultravisor (mostly EFI) space.
- *
- */
-
-#ifndef _CONTROL_FRAMEWORK_H_
-#define _CONTROL_FRAMEWORK_H_
-
-#include <linux/types.h>
-#include "channel.h"
-
-struct spar_segment_state  {
-	u16 enabled:1;		/* Bit 0: May enter other states */
-	u16 active:1;		/* Bit 1: Assigned to active partition */
-	u16 alive:1;		/* Bit 2: Configure message sent to
-				 * service/server */
-	u16 revoked:1;		/* Bit 3: similar to partition state
-				 * ShuttingDown */
-	u16 allocated:1;	/* Bit 4: memory (device/port number)
-				 * has been selected by Command */
-	u16 known:1;		/* Bit 5: has been introduced to the
-				 * service/guest partition */
-	u16 ready:1;		/* Bit 6: service/Guest partition has
-				 * responded to introduction */
-	u16 operating:1;	/* Bit 7: resource is configured and
-				 * operating */
-	/* Note: don't use high bit unless we need to switch to ushort
-	 * which is non-compliant */
-};
-
-static const struct spar_segment_state segment_state_running = {
-	1, 1, 1, 0, 1, 1, 1, 1
-};
-
-static const struct spar_segment_state segment_state_paused = {
-	1, 1, 1, 0, 1, 1, 1, 0
-};
-
-static const struct spar_segment_state segment_state_standby = {
-	1, 1, 0, 0, 1, 1, 1, 0
-};
-
-#endif				/* _CONTROL_FRAMEWORK_H_ not defined */

drivers/staging/unisys/common-spar/include/channels/controlvmchannel.h

@@ -18,7 +18,6 @@
 
 #include <linux/uuid.h>
 #include "channel.h"
-#include "controlframework.h"
 
 /* {2B3C2D10-7EF5-4ad8-B966-3448B7386B3D} */
 #define SPAR_CONTROLVM_CHANNEL_PROTOCOL_UUID	\
@@ -56,6 +55,37 @@
 /* Max num of messages stored during IOVM creation to be reused after crash */
 #define CONTROLVM_CRASHMSG_MAX		2
 
+struct spar_segment_state  {
+	u16 enabled:1;		/* Bit 0: May enter other states */
+	u16 active:1;		/* Bit 1: Assigned to active partition */
+	u16 alive:1;		/* Bit 2: Configure message sent to
+				 * service/server */
+	u16 revoked:1;		/* Bit 3: similar to partition state
+				 * ShuttingDown */
+	u16 allocated:1;	/* Bit 4: memory (device/port number)
+				 * has been selected by Command */
+	u16 known:1;		/* Bit 5: has been introduced to the
+				 * service/guest partition */
+	u16 ready:1;		/* Bit 6: service/Guest partition has
+				 * responded to introduction */
+	u16 operating:1;	/* Bit 7: resource is configured and
+				 * operating */
+	/* Note: don't use high bit unless we need to switch to ushort
+	 * which is non-compliant */
+};
+
+static const struct spar_segment_state segment_state_running = {
+	1, 1, 1, 0, 1, 1, 1, 1
+};
+
+static const struct spar_segment_state segment_state_paused = {
+	1, 1, 1, 0, 1, 1, 1, 0
+};
+
+static const struct spar_segment_state segment_state_standby = {
+	1, 1, 0, 0, 1, 1, 1, 0
+};
+
 /* Ids for commands that may appear in either queue of a ControlVm channel.
  *
  *  Commands that are initiated by the command partition (CP), by an IO or