Commit 39ca554c authored by Rafał Miłecki's avatar Rafał Miłecki Committed by John W. Linville

b43: HT-PHY: add place for implementing channel switching

Signed-off-by: default avatarRafał Miłecki <zajec5@gmail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 5192bf56
...@@ -27,6 +27,49 @@ ...@@ -27,6 +27,49 @@
#include "radio_2059.h" #include "radio_2059.h"
#include "main.h" #include "main.h"
static void b43_radio_2059_channel_setup(struct b43_wldev *dev,
const struct b43_phy_ht_channeltab_e_radio2059 *e)
{
/* TODO */
}
static void b43_phy_ht_channel_setup(struct b43_wldev *dev,
const struct b43_phy_ht_channeltab_e_phy *e,
struct ieee80211_channel *new_channel)
{
/* TODO */
}
static int b43_phy_ht_set_channel(struct b43_wldev *dev,
struct ieee80211_channel *channel,
enum nl80211_channel_type channel_type)
{
struct b43_phy *phy = &dev->phy;
const struct b43_phy_ht_channeltab_e_radio2059 *chent_r2059 = NULL;
if (phy->radio_ver == 0x2059) {
chent_r2059 = b43_phy_ht_get_channeltab_e_r2059(dev,
channel->center_freq);
if (!chent_r2059)
return -ESRCH;
} else {
return -ESRCH;
}
/* TODO: In case of N-PHY some bandwidth switching goes here */
if (phy->radio_ver == 0x2059) {
b43_radio_2059_channel_setup(dev, chent_r2059);
b43_phy_ht_channel_setup(dev, &(chent_r2059->phy_regs),
channel);
} else {
return -ESRCH;
}
return 0;
}
/************************************************** /**************************************************
* Basic PHY ops. * Basic PHY ops.
**************************************************/ **************************************************/
...@@ -96,6 +139,22 @@ static void b43_phy_ht_op_switch_analog(struct b43_wldev *dev, bool on) ...@@ -96,6 +139,22 @@ static void b43_phy_ht_op_switch_analog(struct b43_wldev *dev, bool on)
} }
} }
static int b43_phy_ht_op_switch_channel(struct b43_wldev *dev,
unsigned int new_channel)
{
struct ieee80211_channel *channel = dev->wl->hw->conf.channel;
enum nl80211_channel_type channel_type = dev->wl->hw->conf.channel_type;
if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
if ((new_channel < 1) || (new_channel > 14))
return -EINVAL;
} else {
return -EINVAL;
}
return b43_phy_ht_set_channel(dev, channel, channel_type);
}
static unsigned int b43_phy_ht_op_get_default_chan(struct b43_wldev *dev) static unsigned int b43_phy_ht_op_get_default_chan(struct b43_wldev *dev)
{ {
if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
...@@ -161,9 +220,7 @@ const struct b43_phy_operations b43_phyops_ht = { ...@@ -161,9 +220,7 @@ const struct b43_phy_operations b43_phyops_ht = {
.radio_write = b43_phy_ht_op_radio_write, .radio_write = b43_phy_ht_op_radio_write,
.software_rfkill = b43_phy_ht_op_software_rfkill, .software_rfkill = b43_phy_ht_op_software_rfkill,
.switch_analog = b43_phy_ht_op_switch_analog, .switch_analog = b43_phy_ht_op_switch_analog,
/*
.switch_channel = b43_phy_ht_op_switch_channel, .switch_channel = b43_phy_ht_op_switch_channel,
*/
.get_default_chan = b43_phy_ht_op_get_default_chan, .get_default_chan = b43_phy_ht_op_get_default_chan,
/* /*
.recalc_txpower = b43_phy_ht_op_recalc_txpower, .recalc_txpower = b43_phy_ht_op_recalc_txpower,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment