Commit 3a2d5b70 authored by Rafael J. Wysocki's avatar Rafael J. Wysocki Committed by Linus Torvalds

PM: Introduce PM_EVENT_HIBERNATE callback state

During the last step of hibernation in the "platform" mode (with the
help of ACPI) we use the suspend code, including the devices'
->suspend() methods, to prepare the system for entering the ACPI S4
system sleep state.

But at least for some devices the operations performed by the
->suspend() callback in that case must be different from its operations
during regular suspend.

For this reason, introduce the new PM event type PM_EVENT_HIBERNATE and
pass it to the device drivers' ->suspend() methods during the last phase
of hibernation, so that they can distinguish this case and handle it as
appropriate.  Modify the drivers that handle PM_EVENT_SUSPEND in a
special way and need to handle PM_EVENT_HIBERNATE in the same way.

These changes are necessary to fix a hibernation regression related
to the i915 driver (ref. http://lkml.org/lkml/2008/2/22/488).
Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
Acked-by: default avatarPavel Machek <pavel@ucw.cz>
Tested-by: default avatarJeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 39273b58
......@@ -310,9 +310,12 @@ used with suspend-to-disk:
PM_EVENT_SUSPEND -- quiesce the driver and put hardware into a low-power
state. When used with system sleep states like "suspend-to-RAM" or
"standby", the upcoming resume() call will often be able to rely on
state kept in hardware, or issue system wakeup events. When used
instead with suspend-to-disk, few devices support this capability;
most are completely powered off.
state kept in hardware, or issue system wakeup events.
PM_EVENT_HIBERNATE -- Put hardware into a low-power state and enable wakeup
events as appropriate. It is only used with hibernation
(suspend-to-disk) and few devices are able to wake up the system from
this state; most are completely powered off.
PM_EVENT_FREEZE -- quiesce the driver, but don't necessarily change into
any low power mode. A system snapshot is about to be taken, often
......@@ -329,8 +332,8 @@ used with suspend-to-disk:
wakeup events nor DMA are allowed.
To enter "standby" (ACPI S1) or "Suspend to RAM" (STR, ACPI S3) states, or
the similarly named APM states, only PM_EVENT_SUSPEND is used; for "Suspend
to Disk" (STD, hibernate, ACPI S4), all of those event codes are used.
the similarly named APM states, only PM_EVENT_SUSPEND is used; the other event
codes are used for hibernation ("Suspend to Disk", STD, ACPI S4).
There's also PM_EVENT_ON, a value which never appears as a suspend event
but is sometimes used to record the "not suspended" device state.
......
......@@ -1932,7 +1932,7 @@ static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
u32 ctl;
if (mesg.event == PM_EVENT_SUSPEND) {
if (mesg.event & PM_EVENT_SLEEP) {
/* AHCI spec rev1.1 section 8.3.3:
* Software must disable interrupts prior to requesting a
* transition of the HBA to D3 state.
......
......@@ -1339,7 +1339,7 @@ static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
* cycles and power trying to do something to the sleeping
* beauty.
*/
if (piix_broken_suspend() && mesg.event == PM_EVENT_SUSPEND) {
if (piix_broken_suspend() && (mesg.event & PM_EVENT_SLEEP)) {
pci_save_state(pdev);
/* mark its power state as "unknown", since we don't
......
......@@ -7368,7 +7368,7 @@ void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg)
pci_save_state(pdev);
pci_disable_device(pdev);
if (mesg.event == PM_EVENT_SUSPEND)
if (mesg.event & PM_EVENT_SLEEP)
pci_set_power_state(pdev, PCI_D3hot);
}
......
......@@ -1254,7 +1254,7 @@ pmac_ide_macio_suspend(struct macio_dev *mdev, pm_message_t mesg)
int rc = 0;
if (mesg.event != mdev->ofdev.dev.power.power_state.event
&& mesg.event == PM_EVENT_SUSPEND) {
&& (mesg.event & PM_EVENT_SLEEP)) {
rc = pmac_ide_do_suspend(hwif);
if (rc == 0)
mdev->ofdev.dev.power.power_state = mesg;
......@@ -1364,7 +1364,7 @@ pmac_ide_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
int rc = 0;
if (mesg.event != pdev->dev.power.power_state.event
&& mesg.event == PM_EVENT_SUSPEND) {
&& (mesg.event & PM_EVENT_SLEEP)) {
rc = pmac_ide_do_suspend(hwif);
if (rc == 0)
pdev->dev.power.power_state = mesg;
......
......@@ -698,7 +698,8 @@ static int media_bay_suspend(struct macio_dev *mdev, pm_message_t state)
{
struct media_bay_info *bay = macio_get_drvdata(mdev);
if (state.event != mdev->ofdev.dev.power.power_state.event && state.event == PM_EVENT_SUSPEND) {
if (state.event != mdev->ofdev.dev.power.power_state.event
&& (state.event & PM_EVENT_SLEEP)) {
down(&bay->lock);
bay->sleeping = 1;
set_mb_power(bay, 0);
......
......@@ -554,6 +554,7 @@ pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state)
case PM_EVENT_PRETHAW:
/* REVISIT both freeze and pre-thaw "should" use D0 */
case PM_EVENT_SUSPEND:
case PM_EVENT_HIBERNATE:
return PCI_D3hot;
default:
printk("Unrecognized suspend event %d\n", state.event);
......
......@@ -89,7 +89,7 @@ ahd_linux_pci_dev_suspend(struct pci_dev *pdev, pm_message_t mesg)
pci_save_state(pdev);
pci_disable_device(pdev);
if (mesg.event == PM_EVENT_SUSPEND)
if (mesg.event & PM_EVENT_SLEEP)
pci_set_power_state(pdev, PCI_D3hot);
return rc;
......
......@@ -134,7 +134,7 @@ ahc_linux_pci_dev_suspend(struct pci_dev *pdev, pm_message_t mesg)
pci_save_state(pdev);
pci_disable_device(pdev);
if (mesg.event == PM_EVENT_SUSPEND)
if (mesg.event & PM_EVENT_SLEEP)
pci_set_power_state(pdev, PCI_D3hot);
return rc;
......
......@@ -1759,6 +1759,7 @@ static int mesh_suspend(struct macio_dev *mdev, pm_message_t mesg)
switch (mesg.event) {
case PM_EVENT_SUSPEND:
case PM_EVENT_HIBERNATE:
case PM_EVENT_FREEZE:
break;
default:
......
......@@ -1835,8 +1835,7 @@ static int sd_suspend(struct device *dev, pm_message_t mesg)
goto done;
}
if (mesg.event == PM_EVENT_SUSPEND &&
sdkp->device->manage_start_stop) {
if ((mesg.event & PM_EVENT_SLEEP) && sdkp->device->manage_start_stop) {
sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
ret = sd_start_stop_device(sdkp, 0);
}
......
......@@ -1766,6 +1766,7 @@ sl811h_suspend(struct platform_device *dev, pm_message_t state)
retval = sl811h_bus_suspend(hcd);
break;
case PM_EVENT_SUSPEND:
case PM_EVENT_HIBERNATE:
case PM_EVENT_PRETHAW: /* explicitly discard hw state */
port_power(sl811, 0);
break;
......
......@@ -3214,14 +3214,19 @@ static int u132_suspend(struct platform_device *pdev, pm_message_t state)
return -ESHUTDOWN;
} else {
int retval = 0;
if (state.event == PM_EVENT_FREEZE) {
switch (state.event) {
case PM_EVENT_FREEZE:
retval = u132_bus_suspend(hcd);
} else if (state.event == PM_EVENT_SUSPEND) {
break;
case PM_EVENT_SUSPEND:
case PM_EVENT_HIBERNATE:
int ports = MAX_U132_PORTS;
while (ports-- > 0) {
port_power(u132, ports, 0);
}
}
break;
}
if (retval == 0)
pdev->dev.power.power_state = state;
return retval;
......
......@@ -459,7 +459,7 @@ static int chipsfb_pci_suspend(struct pci_dev *pdev, pm_message_t state)
if (state.event == pdev->dev.power.power_state.event)
return 0;
if (state.event != PM_EVENT_SUSPEND)
if (!(state.event & PM_EVENT_SLEEP))
goto done;
acquire_console_sem();
......
......@@ -1066,7 +1066,7 @@ static int nvidiafb_suspend(struct pci_dev *dev, pm_message_t mesg)
acquire_console_sem();
par->pm_state = mesg.event;
if (mesg.event == PM_EVENT_SUSPEND) {
if (mesg.event & PM_EVENT_SLEEP) {
fb_set_suspend(info, 1);
nvidiafb_blank(FB_BLANK_POWERDOWN, info);
nvidia_write_regs(par, &par->SavedReg);
......
......@@ -143,6 +143,9 @@ typedef struct pm_message {
* the upcoming system state (such as PCI_D3hot), and enable
* wakeup events as appropriate.
*
* HIBERNATE Enter a low power device state appropriate for the hibernation
* state (eg. ACPI S4) and enable wakeup events as appropriate.
*
* FREEZE Quiesce operations so that a consistent image can be saved;
* but do NOT otherwise enter a low power device state, and do
* NOT emit system wakeup events.
......@@ -166,11 +169,15 @@ typedef struct pm_message {
#define PM_EVENT_ON 0
#define PM_EVENT_FREEZE 1
#define PM_EVENT_SUSPEND 2
#define PM_EVENT_PRETHAW 3
#define PM_EVENT_HIBERNATE 4
#define PM_EVENT_PRETHAW 8
#define PM_EVENT_SLEEP (PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE)
#define PMSG_FREEZE ((struct pm_message){ .event = PM_EVENT_FREEZE, })
#define PMSG_PRETHAW ((struct pm_message){ .event = PM_EVENT_PRETHAW, })
#define PMSG_SUSPEND ((struct pm_message){ .event = PM_EVENT_SUSPEND, })
#define PMSG_HIBERNATE ((struct pm_message){ .event = PM_EVENT_HIBERNATE, })
#define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, })
struct dev_pm_info {
......
......@@ -391,7 +391,7 @@ int hibernation_platform_enter(void)
goto Close;
suspend_console();
error = device_suspend(PMSG_SUSPEND);
error = device_suspend(PMSG_HIBERNATE);
if (error)
goto Resume_console;
......@@ -404,7 +404,7 @@ int hibernation_platform_enter(void)
goto Finish;
local_irq_disable();
error = device_power_down(PMSG_SUSPEND);
error = device_power_down(PMSG_HIBERNATE);
if (!error) {
hibernation_ops->enter();
/* We should never get here */
......
......@@ -232,7 +232,7 @@ static int rfkill_suspend(struct device *dev, pm_message_t state)
struct rfkill *rfkill = to_rfkill(dev);
if (dev->power.power_state.event != state.event) {
if (state.event == PM_EVENT_SUSPEND) {
if (state.event & PM_EVENT_SLEEP) {
mutex_lock(&rfkill->mutex);
if (rfkill->state == RFKILL_STATE_ON)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment